Add support for MS7720RP02 board

diff -uprN a/board/ms7720se/config.mk b/board/ms7720se/config.mk
@@ -0,0 +1,35 @@
+#
+# Copyright (C) 2007
+# Yoshihiro Shimoda <[email protected]>
+#
+# Copyright (C) 2007
+# Nobuhiro Iwamatsu <[email protected]>
+#
+# Copyright (C) 2007
+# Kenati Technologies, Inc.
+#
+# board/ms7722se/config.mk
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+#
+# TEXT_BASE refers to image _after_ relocation.
+#
+# NOTE: Must match value used in u-boot.lds (in this directory).
+#
+
+TEXT_BASE = 0x8FFC0000
+

269 lines not on this page · raw message

51 lines not on this page · raw message

109 lines not on this page · raw message

@@ -2596,6 +2596,14 @@ atstk1002_config	:	unconfig
 #########################################################################
 
 #########################################################################
+## sh3 (Renesas SuperH)
+#########################################################################
+ms7720se_config: unconfig
+	@ >include/config.h
+	@echo "#define CONFIG_MS7720SE 1" >> include/config.h
+	@./mkconfig -a $(@:_config=) sh sh3 ms7720se
+
+#########################################################################
 ## sh4 (Renesas SuperH)
 #########################################################################
 ms7750se_config: unconfig