kvm-55 and ne2k-pci
I installed redhat7.3 and redhat 9 an a qemu-img with 12G each.
When I am running the ne2k-pci the network stalls. I tried both redhat 7.3 and redhat 9. both stall.
I then tried to change to use "-net nic,model=rtl8139" and I could not get the network to even start up on redhat 9. I re-ran kudzu to detect the new network card - it did, I rebooted I got errors trying to bring up eth0.
I am running centos 5.1, AMD 6400+ X2, kvm-55, kernel 2.6.23.9
What might my issue be?
Jerry
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 7 lines · Jerry Geis
I installed redhat7.3 and redhat 9 an a qemu-img with 12G each.
When I am running the ne2k-pci the network stalls. I tried both redhat 7.3 and redhat 9. both stall.
I then tried to change to use "-net nic,model=rtl8139" and I could not get the network to even start up on redhat 9.
try -net nic,model=rtl8139 -net user
Quoted 10 lines
I re-ran kudzu to detect the new network card - it did, I rebooted I got errors trying to bring up eth0.
I am running centos 5.1, AMD 6400+ X2, kvm-55, kernel 2.6.23.9
What might my issue be?
Jerry
Quoted 10 lines
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
kvm-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/kvm-devel
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
A message that is not in the archive (sent off-list or not yet received): 1197294334.3164.0.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/[email protected]
Quoted 4 lines · Izik Eidus
Quoted 2 lines · Jerry Geis
I installed redhat7.3 and redhat 9 an a qemu-img with 12G each.
Quoted 32 lines
Quoted 6 lines
When I am running the ne2k-pci the network stalls. I tried both redhat 7.3 and redhat 9. both stall.
I then tried to change to use "-net nic,model=rtl8139" and I could not get the network to even start up on redhat 9.
try -net nic,model=rtl8139 -net user
Quoted 21 lines
I re-ran kudzu to detect the new network card - it did, I rebooted I got errors trying to bring up eth0.
I am running centos 5.1, AMD 6400+ X2, kvm-55, kernel 2.6.23.9
What might my issue be?
Jerry
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
kvm-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/kvm-devel
The extra -net user did the trick for redhat 9. THanks, I'll try redhat 7 now.
The network "seemed" slow. ethtool eth0 reports 100m full. when copying all my files over it was slow. THese were source files (text) not big files at all.
Jerry
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 7 lines · Jerry Geis
The extra -net user did the trick for redhat 9. THanks, I'll try redhat 7 now.
The network "seemed" slow. ethtool eth0 reports 100m full. when copying all my files over it was slow. THese were source files (text) not big files at all.
-net user is quite slow. Try -net tap got get better performance, though there's much more setup work involved.
Signature · 9 lines
error compiling committee.c: too many arguments to function ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php