Skip to contentSkip to conversation

Subject: [PATCH] [1/1] simplify mmio read/write callback structure

PATCH Christian Ehrhardt 1 participant 1 message Dec 11, 2007 KVM

lore
Share & tools
lore

Christian Ehrhardt

author
#0 lore raw

Subject: [PATCH] [1/1] simplify mmio read/write callback structure

From: Christian Ehrhardt <[email protected]>

Merging the read[bwlq]/write[bwlq] callback callback pointers to mmio_read/write functions simplifies the callback interface. On the qemu side it now uses the cpu_physical_memory_rw function.
Additonally this patch merges the RedHat 7.1 mmio workaround that
was spread to two code locations.

Signed-off-by Christian Ehrhardt <[email protected]>

---

[diffstat]

libkvm/libkvm.c |   40 ++++--------------------------------
libkvm/libkvm.h |   19 ++---------------
qemu/qemu-kvm.c |   62 +++-----------------------------------------------------
user/main.c     |   52 ++++++----------------------------------------
4 files changed, 19 insertions(+), 154 deletions(-)

[diff]
*Attached*

Signature · 10 lines
Grüsse / regards, Christian Ehrhardt

IBM Linux Technology Center, Open Virtualization
+49 7031/16-3385
[email protected]
[email protected]

IBM Deutschland Entwicklung GmbH
Vorsitzender des Aufsichtsrats: Johann Weihen Geschäftsführung: Herbert Kircher Sitz der Gesellschaft: Böblingen
Registergericht: Amtsgericht Stuttgart, HRB 243294
libkvm/libkvm.c +8 -35
index 573a9ab..a2dea9b 100644
@@ -771,44 +771,17 @@ static int handle_mmio(kvm_context_t kvm, struct kvm_run *kvm_run)
 {
 	unsigned long addr = kvm_run->mmio.phys_addr;
 	void *data = kvm_run->mmio.data;
-	int r = -1;
 
-	/* hack: Red Hat 7.1 generates these wierd accesses. */
-	if (addr == 0xa0000 && kvm_run->mmio.len == 3)
+	/* hack: Red Hat 7.1 generates these weird accesses. */
+	if ((addr > 0xa0000-4 && addr <= 0xa0000) && kvm_run->mmio.len == 3)
 	    return 0;
 
-	if (kvm_run->mmio.is_write) {
-		switch (kvm_run->mmio.len) {
-		case 1:
-			r = kvm->callbacks->writeb(kvm->opaque, addr, *(uint8_t *)data);
-			break;
-		case 2:
-			r = kvm->callbacks->writew(kvm->opaque, addr, *(uint16_t *)data);
-			break;
-		case 4:
-			r = kvm->callbacks->writel(kvm->opaque, addr, *(uint32_t *)data);
-			break;
-		case 8:
-			r = kvm->callbacks->writeq(kvm->opaque, addr, *(uint64_t *)data);
-			break;
-		}
-	} else {
-		switch (kvm_run->mmio.len) {
-		case 1:
-			r = kvm->callbacks->readb(kvm->opaque, addr, (uint8_t *)data);
-			break;
-		case 2:
-			r = kvm->callbacks->readw(kvm->opaque, addr, (uint16_t *)data);
-			break;
-		case 4:
-			r = kvm->callbacks->readl(kvm->opaque, addr, (uint32_t *)data);
-			break;
-		case 8:
-			r = kvm->callbacks->readq(kvm->opaque, addr, (uint64_t *)data);
-			break;
-		}
-	}
-	return r;
+	if (kvm_run->mmio.is_write)
+		return kvm->callbacks->mmio_write(kvm->opaque, addr, data,
+					kvm_run->mmio.len);
+	else
+		return kvm->callbacks->mmio_read(kvm->opaque, addr, data,
+					kvm_run->mmio.len);
 }
 
 int handle_io_window(kvm_context_t kvm)
libkvm/libkvm.h +6 -16
index ff260f4..129f260 100644
@@ -45,22 +45,12 @@ struct kvm_callbacks {
     int (*outw)(void *opaque, uint16_t addr, uint16_t data);
 	/// For 32bit IO writes from the guest (Usually when executing 'outl')
     int (*outl)(void *opaque, uint16_t addr, uint32_t data);
-	/// For 8bit memory reads from unmapped memory (For MMIO devices)
-    int (*readb)(void *opaque, uint64_t addr, uint8_t *data);
-	/// For 16bit memory reads from unmapped memory (For MMIO devices)
-    int (*readw)(void *opaque, uint64_t addr, uint16_t *data);
-	/// For 32bit memory reads from unmapped memory (For MMIO devices)
-    int (*readl)(void *opaque, uint64_t addr, uint32_t *data);
-	/// For 64bit memory reads from unmapped memory (For MMIO devices)
-    int (*readq)(void *opaque, uint64_t addr, uint64_t *data);
-	/// For 8bit memory writes to unmapped memory (For MMIO devices)
-    int (*writeb)(void *opaque, uint64_t addr, uint8_t data);
-	/// For 16bit memory writes to unmapped memory (For MMIO devices)
-    int (*writew)(void *opaque, uint64_t addr, uint16_t data);
-	/// For 32bit memory writes to unmapped memory (For MMIO devices)
-    int (*writel)(void *opaque, uint64_t addr, uint32_t data);
-	/// For 64bit memory writes to unmapped memory (For MMIO devices)
-    int (*writeq)(void *opaque, uint64_t addr, uint64_t data);
+	/// generic memory reads to unmapped memory (For MMIO devices)
+    int (*mmio_read)(void *opaque, uint64_t addr, uint8_t *data,
+					int len);
+	/// generic memory writes to unmapped memory (For MMIO devices)
+    int (*mmio_write)(void *opaque, uint64_t addr, uint8_t *data,
+					int len);
     int (*debug)(void *opaque, int vcpu);
 	/*!
 	 * \brief Called when the VCPU issues an 'hlt' instruction.
qemu/qemu-kvm.c +9 -55

81 lines not on this page · raw message

user/main.c +4 -50

78 lines not on this page · raw message

-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php

_______________________________________________
kvm-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/kvm-devel