Skip to contentSkip to conversation

Port 0x80 I/O speed

RFT Rene Herman 32 participants 59 messages Dec 11, 2007 – Dec 22, 2007 1 message not in the archive

lore
Share & tools
lore
#0 lore raw

Good day.

Would some people on x86 (both 32 and 64) be kind enough to compile and run the attached program? This is about testing how long I/O port access to port 0x80 takes. It measures in CPU cycles so CPU speed is crucial in reporting.

Posted a previous incarnation of this before, buried in the outb 0x80 thread which had a serialising problem. This one should as far as I can see measure the right thing though. Please yell if you disagree...

For me, on a Duron 1300 (AMD756 chipset) I have a constant:

rene@7ixe4:~/src/port80$ su -c ./port80
cycles: out 2400, in 2400

and on a PII 400 (Intel 440BX chipset) a constant:

rene@6bap:~/src/port80$ su -c ./port80
cycles: out 553, in 251

Results are (mostly) independent of compiler optimisation, but testing with an -O2 compile should be most useful. Thanks!

Rene.

/* gcc -W -Wall -O2 -o port80 port80.c */

#include <stdlib.h>
#include <stdio.h>

#include <sys/io.h>

#define LOOPS 10000

inline unsigned long long rdtsc(void)

{
	unsigned long long tsc;

	asm volatile ("rdtsc": "=A" (tsc));

	return tsc;
}

inline void serialize(void)

{
	asm volatile ("cpuid": : : "eax", "ebx", "ecx", "edx");
}

int main(void)

{
	unsigned long long start;
	unsigned long long overhead; 
	unsigned long long output;
	unsigned long long input;
	int i;

	if (iopl(3) < 0) {
		perror("iopl");
		return EXIT_FAILURE;
	}

	asm volatile ("cli");
	start = rdtsc();
	for (i = 0; i < LOOPS; i++) {
	 	serialize();	
		serialize();
	}
	overhead = rdtsc() - start;

	start = rdtsc() + overhead;
	for (i = 0; i < LOOPS; i++) {
		serialize();
		asm volatile ("outb %al, $0x80");
		serialize();
	}
	output = rdtsc() - start;

	start = rdtsc() + overhead;
	for (i = 0; i < LOOPS; i++) {
		serialize();
		asm volatile ("inb $0x80, %%al": : : "al");
		serialize();
	}
	input = rdtsc() - start;
	asm volatile ("sti");

	output /= LOOPS;
	input  /= LOOPS;
	printf("cycles: out %llu, in %llu\n", output, input);

	return EXIT_SUCCESS;
}
#1 lore raw
Quoted 17 lines · On Wednesday 12 December 2007 01:31:18 Rene Herman wrote:

Good day.

Would some people on x86 (both 32 and 64) be kind enough to compile and run the attached program? This is about testing how long I/O port access to port 0x80 takes. It measures in CPU cycles so CPU speed is crucial in reporting.

Posted a previous incarnation of this before, buried in the outb 0x80 thread which had a serialising problem. This one should as far as I can see measure the right thing though. Please yell if you disagree...

For me, on a Duron 1300 (AMD756 chipset) I have a constant:

rene@7ixe4:~/src/port80$ su -c ./port80
cycles: out 2400, in 2400

and on a PII 400 (Intel 440BX chipset) a constant:

Quoted 8 lines
rene@6bap:~/src/port80$ su -c ./port80
cycles: out 553, in 251

Results are (mostly) independent of compiler optimisation, but testing with an -O2 compile should be most useful. Thanks!

Rene.

Sure,

maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1767, in 1147
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1774, in 1148
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1769, in 1150
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1769, in 1150
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1777, in 1150
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1766, in 1149
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1768, in 1148
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1765, in 1147

Core 2 Duo system (ICH8/Intel DG965RY motherboard)

#5 lore raw
In reply to Rene Herman
Quoted 17 lines · El Wed, 12 Dec 2007 00:31:18 +0100 Rene Herman <[email protected]> escribió:

Good day.

Would some people on x86 (both 32 and 64) be kind enough to compile and run the attached program? This is about testing how long I/O port access to port 0x80 takes. It measures in CPU cycles so CPU speed is crucial in reporting.

Posted a previous incarnation of this before, buried in the outb 0x80 thread which had a serialising problem. This one should as far as I can see measure the right thing though. Please yell if you disagree...

For me, on a Duron 1300 (AMD756 chipset) I have a constant:

rene@7ixe4:~/src/port80$ su -c ./port80
cycles: out 2400, in 2400

and on a PII 400 (Intel 440BX chipset) a constant:

Quoted 7 lines
rene@6bap:~/src/port80$ su -c ./port80
cycles: out 553, in 251

Results are (mostly) independent of compiler optimisation, but testing with an -O2 compile should be most useful. Thanks!

Rene.

On my AMD 3800 X2 (2000MHz) ULi M1697 2.6.24-rc5 i get:

cycles: out 1844674407370808, in 1844674407369087

It is not constant but variations are not significant afaics

#2 lore raw
In reply to Maxim Levitsky
Quoted 18 lines · Maxim Levitsky
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1767, in 1147
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1774, in 1148
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1769, in 1150
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1769, in 1150
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1777, in 1150
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1766, in 1149
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1768, in 1148
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1765, in 1147
Quoted 1 line

Core 2 Duo system (ICH8/Intel DG965RY motherboard)

1.8 Ghz?

Rene.

#6 lore raw
In reply to Alejandro Riveira Fernández
Quoted 5 lines · Alejandro Riveira Fernández

On my AMD 3800 X2 (2000MHz) ULi M1697 2.6.24-rc5 i get:

cycles: out 1844674407370808, in 1844674407369087

It is not constant but variations are not significant afaics

Eh, oh, I guess you need to compile as a 32-bit binary...

Rene.

#14 lore raw
In reply to Rene Herman
Quoted 16 lines · Rene Herman

Good day.

Would some people on x86 (both 32 and 64) be kind enough to compile and run the attached program? This is about testing how long I/O port access to port 0x80 takes. It measures in CPU cycles so CPU speed is crucial in reporting.

Posted a previous incarnation of this before, buried in the outb 0x80 thread which had a serialising problem. This one should as far as I can see measure the right thing though. Please yell if you disagree...

For me, on a Duron 1300 (AMD756 chipset) I have a constant:

rene@7ixe4:~/src/port80$ su -c ./port80
cycles: out 2400, in 2400
Quoted 7 lines

and on a PII 400 (Intel 440BX chipset) a constant:

rene@6bap:~/src/port80$ su -c ./port80
cycles: out 553, in 251

Results are (mostly) independent of compiler optimisation, but testing with an -O2 compile should be most useful. Thanks!

(AMD 1.8GHz Turion, running at 800MHz. ATI RS480 - Mitac 8350 mobo)

nigel@home:~/Downloads$ gcc port80.c -o port80
nigel@home:~/Downloads$ sudo ./port80
cycles: out 1235, in 1207
nigel@home:~/Downloads$ sudo ./port80
cycles: out 1238, in 1205
nigel@home:~/Downloads$ sudo ./port80
cycles: out 1237, in 1209
nigel@home:~/Downloads$ gcc -O2 port80.c -o port80
nigel@home:~/Downloads$ sudo ./port80
cycles: out 1844674407370794, in 1844674407369408
nigel@home:~/Downloads$ sudo ./port80
cycles: out 1844674407370795, in 1844674407369404
nigel@home:~/Downloads$ sudo ./port80
cycles: out 1844674407370795, in 1844674407369409
nigel@home:~/Downloads$ sudo ./port80
cycles: out 1844674407370798, in 1844674407369407
nigel@home:~/Downloads$ cat /proc/cpuinfo
processor       : 0
vendor_id       : AuthenticAMD
cpu family      : 15
model           : 36
model name      : AMD Turion(tm) 64 Mobile Technology ML-34
stepping        : 2
cpu MHz         : 800.000
cache size      : 1024 KB
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt
lm 3dnowext 3dnow rep_good pni lahf_lm
bogomips        : 1592.87
TLB size        : 1024 4K pages
clflush size    : 64
cache_alignment : 64
address sizes   : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc

Regards,

Nigel

#15 lore raw
Quoted 5 lines · Nigel Cunningham

(AMD 1.8GHz Turion, running at 800MHz. ATI RS480 - Mitac 8350 mobo)

nigel@home:~/Downloads$ gcc port80.c -o port80
nigel@home:~/Downloads$ sudo ./port80
cycles: out 1235, in 1207

Looking good.

Quoted 3 lines
nigel@home:~/Downloads$ gcc -O2 port80.c -o port80
nigel@home:~/Downloads$ sudo ./port80
cycles: out 1844674407370794, in 1844674407369408

Obviously not. I suppose this changes with -m32 on the GCC command line? (sorry for missing that, I have no 64-bit machines).

Rene.

#7 lore raw
In reply to Rene Herman
Quoted 9 lines · El Wed, 12 Dec 2007 00:51:25 +0100 Rene Herman <[email protected]> escribió:
Quoted 5 lines · Alejandro Riveira Fernández

On my AMD 3800 X2 (2000MHz) ULi M1697 2.6.24-rc5 i get:

cycles: out 1844674407370808, in 1844674407369087

It is not constant but variations are not significant afaics

Eh, oh, I guess you need to compile as a 32-bit binary...

I tried without -O2 as Nigel Cunningham...

cycles: out 1562, in 865
cycles: out 1562, in 866
cycles: out 1555, in 858
cycles: out 1562, in 866

With -m32 -O2
cycles: out 1566, in 876
cycles: out 1555, in 865
cycles: out 1594, in 931
cycles: out 1559, in 874
...

Quoted 2 lines

Rene.

#3 lore raw
In reply to Rene Herman
Quoted 20 lines · On Wednesday 12 December 2007 01:44:42 Rene Herman wrote:
Quoted 18 lines · Maxim Levitsky
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1767, in 1147
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1774, in 1148
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1769, in 1150
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1769, in 1150
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1777, in 1150
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1766, in 1149
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1768, in 1148
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1765, in 1147
Quoted 7 lines
Quoted 1 line

Core 2 Duo system (ICH8/Intel DG965RY motherboard)

1.8 Ghz?

Rene.

2.1 GHZ. but usually reduced by EIST to 1.5 GHz
(It can have just two values above)

I did the tests again:

CPU frequency locked to 2128.000 Mhz:

maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1650, in 1065
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1648, in 1066
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1649, in 1065
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1648, in 1065
maxim@MAIN:~/tmp$

CPU frequency locked to: 1596.000 Mhz

maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1730, in 1138
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1730, in 1138
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1735, in 1140
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1734, in 1139
maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1734, in 1138
maxim@MAIN:~/tmp$ 2128.000    

A bit strange, isn't it?
Regards,
Maxim Levitsky

#8 lore raw
In reply to Alejandro Riveira Fernández
Quoted 14 lines · Alejandro Riveira Fernández
Quoted 6 lines
Quoted 5 lines

On my AMD 3800 X2 (2000MHz) ULi M1697 2.6.24-rc5 i get:

cycles: out 1844674407370808, in 1844674407369087

It is not constant but variations are not significant afaics

Eh, oh, I guess you need to compile as a 32-bit binary...

I tried without -O2 as Nigel Cunningham...

cycles: out 1562, in 865
cycles: out 1562, in 866
cycles: out 1555, in 858
cycles: out 1562, in 866

Quoted 5 lines

With -m32 -O2
cycles: out 1566, in 876
cycles: out 1555, in 865
cycles: out 1594, in 931
cycles: out 1559, in 874

Great, thanks much for reporting. Sort of interesting in itself that without -O2 you do still get correct results on 64-bit but for some other time.

You're the first one to go significantly below 1 us it seems.

Rene.

#4 lore raw
In reply to Maxim Levitsky
Quoted 9 lines · Maxim Levitsky

CPU frequency locked to 2128.000 Mhz:

maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1650, in 1065

CPU frequency locked to: 1596.000 Mhz

maxim@MAIN:~/tmp$ sudo ./port800
cycles: out 1730, in 1138

A bit strange, isn't it?

Well, yes. Don't know what that effect is. A bus-clock divided from the CPU clock comes to mind, but I believe that shouldn't happen to LPC.

Anyways, we're looking for an upper bound and that's still nicely below 2 us on everything upto now, so I guess it doesn't matter all that much. Thanks!

Rene.

#17 lore raw
In reply to Rene Herman
Quoted 6 lines · On Tuesday 11 December 2007 23:31:18 Rene Herman wrote:

Good day.

Would some people on x86 (both 32 and 64) be kind enough to compile and run the attached program? This is about testing how long I/O port access to port 0x80 takes. It measures in CPU cycles so CPU speed is crucial in reporting.

cycles: out 2712, in 2606

1.5GHz C7, Via chipset. 32bit OS.

Signature · 4 lines
Cheers,
Alistair.

137/1 Warrender Park Road, Edinburgh, UK.
#18 lore raw
In reply to Rene Herman
Quoted 15 lines · On Wed, 12 Dec 2007 00:31:18 +0100 Rene Herman wrote:

Good day.

Would some people on x86 (both 32 and 64) be kind enough to compile and run the attached program? This is about testing how long I/O port access to port 0x80 takes. It measures in CPU cycles so CPU speed is crucial in reporting.

Posted a previous incarnation of this before, buried in the outb 0x80 thread which had a serialising problem. This one should as far as I can see measure the right thing though. Please yell if you disagree...

For me, on a Duron 1300 (AMD756 chipset) I have a constant:

rene@7ixe4:~/src/port80$ su -c ./port80
cycles: out 2400, in 2400
Quoted 7 lines

and on a PII 400 (Intel 440BX chipset) a constant:

rene@6bap:~/src/port80$ su -c ./port80
cycles: out 553, in 251

Results are (mostly) independent of compiler optimisation, but testing with an -O2 compile should be most useful. Thanks!

(-m32 build on x86_64)

midway:/home/rddunlap/src # ./port80
cycles: out 2702, in 1903
midway:/home/rddunlap/src # ./port80
cycles: out 2688, in 1893
midway:/home/rddunlap/src # ./port80
cycles: out 2703, in 1909
midway:/home/rddunlap/src # ./port80
cycles: out 2687, in 1893
midway:/home/rddunlap/src # ./port80
cycles: out 2687, in 1893
midway:/home/rddunlap/src # ./port80
cycles: out 2701, in 1907
midway:/home/rddunlap/src # ./port80
cycles: out 2701, in 1919
midway:/home/rddunlap/src # ./port80
cycles: out 2687, in 1893
midway:/home/rddunlap/src # ./port80
cycles: out 2701, in 1909
midway:/home/rddunlap/src # ./port80
cycles: out 2706, in 1906

/proc/cpuinfo says CPU speed is
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Pentium(R) D CPU 3.00GHz
stepping : 4
cpu MHz : 2999.988

---
~Randy

#19 lore raw
In reply to Rene Herman
Quoted 10 lines · Rene Herman

Good day.

Would some people on x86 (both 32 and 64) be kind enough to compile and run the attached program? This is about testing how long I/O port access to port 0x80 takes. It measures in CPU cycles so CPU speed is crucial in reporting.

Posted a previous incarnation of this before, buried in the outb 0x80 thread which had a serialising problem. This one should as far as I can see measure the right thing though. Please yell if you disagree...

cycles: out 1399, in 303
cycles: out 1347, in 297
cycles: out 1235, in 251
cycles: out 1342, in 249
cycles: out 1393, in 274
cycles: out 1241, in 261
cycles: out 1238, in 251
cycles: out 1383, in 277
cycles: out 1228, in 252
cycles: out 1413, in 303
cycles: out 1394, in 268
cycles: out 1378, in 292
cycles: out 1239, in 265

-m32 build on x64
processor : 1
vendor_id : AuthenticAMD
cpu family : 15
model : 107
model name : AMD Athlon(tm) 64 X2 Dual Core Processor 4400+
stepping : 1
cpu MHz : 2300.000

#16 lore raw
In reply to Rene Herman
Quoted 8 lines · Rene Herman
Quoted 5 lines · Nigel Cunningham

(AMD 1.8GHz Turion, running at 800MHz. ATI RS480 - Mitac 8350 mobo)

nigel@home:~/Downloads$ gcc port80.c -o port80
nigel@home:~/Downloads$ sudo ./port80
cycles: out 1235, in 1207
Quoted 8 lines

Looking good.

Quoted 3 lines
nigel@home:~/Downloads$ gcc -O2 port80.c -o port80
nigel@home:~/Downloads$ sudo ./port80
cycles: out 1844674407370794, in 1844674407369408

Obviously not. I suppose this changes with -m32 on the GCC command line? (sorry for missing that, I have no 64-bit machines).

Yes, it does:

nigel@home:~/Downloads$ gcc -m32 -o port80 port80.c
nigel@home:~/Downloads$ sudo ./port80
cycles: out 1231, in 1208
nigel@home:~/Downloads$ sudo ./port80
cycles: out 1233, in 1210

Incidentally:

nigel@home:~/Downloads$ processor_speed

(A little script I made because my lappy does a solid lock every now and then that seems to be cpu-freq related - locking it to one frequency makes the lock far less common).

Speed is now 1800000.

nigel@home:~/Downloads$ sudo ./port80
cycles: out 2472, in 2505
nigel@home:~/Downloads$ sudo ./port80
cycles: out 2489, in 2515
nigel@home:~/Downloads$ sudo ./port80
cycles: out 2481, in 2503
nigel@home:~/Downloads$ sudo ./port80
cycles: out 2476, in 2507

So the same effect Maxim reported is seen here.

Regards,

Nigel

#20 lore raw
In reply to Rene Herman
Quoted 1 line · Rene Herman
	asm volatile ("rdtsc": "=A" (tsc));

rdtsc returns a 64-bit value in two 32-bit regs, you need to do

inline unsigned long long rdtsc(void)

{
	unsigned int lo, hi;
	asm volatile ("rdtsc": "=a" (lo), "=d" (hi));
	return (unsigned long long)hi << 32 | lo;
}

as in msr.h, otherwise you'll only be looking at the value in %rax.

cheers,
Kyle

#21 lore raw
Quoted 5 lines · Kyle McMartin
Quoted 1 line · Rene Herman
	asm volatile ("rdtsc": "=A" (tsc));

rdtsc returns a 64-bit value in two 32-bit regs, you need to do

Quoted 8 lines

inline unsigned long long rdtsc(void)

{
	unsigned int lo, hi;
	asm volatile ("rdtsc": "=a" (lo), "=d" (hi));
	return (unsigned long long)hi << 32 | lo;
}

as in msr.h, otherwise you'll only be looking at the value in %rax.

On 32-bit, "=A" is edx:eax. Not sure what the point is in not letting it be that on 64-bit in fact, but yes, the thing should be compiled as 32-bit.

Rene.

#26 lore raw
In reply to Rene Herman
Quoted 9 lines · On Wed, 12 Dec 2007 00:31:18 +0100 Rene Herman <[email protected]> wrote:

and on a PII 400 (Intel 440BX chipset) a constant:

rene@6bap:~/src/port80$ su -c ./port80
cycles: out 553, in 251

Results are (mostly) independent of compiler optimisation, but testing with an -O2 compile should be most useful. Thanks!

### Core2 Duo 1.8 GHz ###

X86_64 -m32 -O2:

$ for i in `seq 5`; do sudo ./port80; sleep 1; done
cycles: out 1498, in 964
cycles: out 1498, in 964
cycles: out 1499, in 964
cycles: out 1498, in 964
cycles: out 1498, in 965

processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz
stepping : 6
cpu MHz : 1864.805
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 3731.82
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

[...]

Signature · 2 lines
	Paolo Ornati
	Linux 2.6.24-rc4-g94545bad on x86_64
#28 lore raw
In reply to Rene Herman
Quoted 84 lines · Rene Herman

Good day.

Would some people on x86 (both 32 and 64) be kind enough to compile and run the attached program? This is about testing how long I/O port access to port 0x80 takes. It measures in CPU cycles so CPU speed is crucial in reporting.

Posted a previous incarnation of this before, buried in the outb 0x80 thread which had a serialising problem. This one should as far as I can see measure the right thing though. Please yell if you disagree...

For me, on a Duron 1300 (AMD756 chipset) I have a constant:

rene@7ixe4:~/src/port80$ su -c ./port80
cycles: out 2400, in 2400

and on a PII 400 (Intel 440BX chipset) a constant:

rene@6bap:~/src/port80$ su -c ./port80
cycles: out 553, in 251

Results are (mostly) independent of compiler optimisation, but testing with an -O2 compile should be most useful. Thanks!

Rene.

/* gcc -W -Wall -O2 -o port80 port80.c */

#include <stdlib.h>
#include <stdio.h>

#include <sys/io.h>

#define LOOPS 10000

inline unsigned long long rdtsc(void)

{
        unsigned long long tsc;

        asm volatile ("rdtsc": "=A" (tsc));

        return tsc;
}

inline void serialize(void)

{
        asm volatile ("cpuid": : : "eax", "ebx", "ecx", "edx");
}

int main(void)

{
        unsigned long long start;
        unsigned long long overhead;
        unsigned long long output;
        unsigned long long input;
        int i;

        if (iopl(3) < 0) {
                perror("iopl");
                return EXIT_FAILURE;
        }

        asm volatile ("cli");
        start = rdtsc();
        for (i = 0; i < LOOPS; i++) {
                serialize();
                serialize();
        }
        overhead = rdtsc() - start;

        start = rdtsc() + overhead;
        for (i = 0; i < LOOPS; i++) {
                serialize();
                asm volatile ("outb %al, $0x80");
                serialize();
        }
        output = rdtsc() - start;

        start = rdtsc() + overhead;
        for (i = 0; i < LOOPS; i++) {
                serialize();
                asm volatile ("inb $0x80, %%al": : : "al");
                serialize();
        }
        input = rdtsc() - start;
Quoted 10 lines
        asm volatile ("sti");

        output /= LOOPS;
        input  /= LOOPS;
        printf("cycles: out %llu, in %llu\n", output, input);

        return EXIT_SUCCESS;
}
dave@darkstar:~/work/tmp$ sudo ./port80
cycles: out 2522, in 1788
dave@darkstar:~/work/tmp$ sudo ./port80
cycles: out 2522, in 1795
dave@darkstar:~/work/tmp$ sudo ./port80
cycles: out 2523, in 1788
dave@darkstar:~/work/tmp$ sudo ./port80
cycles: out 2516, in 1788
dave@darkstar:~/work/tmp$ sudo ./port80
cycles: out 2516, in 1798
dave@darkstar:~/work/tmp$ sudo ./port80
cycles: out 2523, in 1788
dave@darkstar:~/work/tmp$ sudo ./port80
cycles: out 2518, in 1788
dave@darkstar:~/work/tmp$ sudo ./port80
cycles: out 2517, in 1788
dave@darkstar:~/work/tmp$ sudo ./port80
cycles: out 2523, in 1788
dave@darkstar:~/work/tmp$ sudo ./port80
cycles: out 2517, in 1788
dave@darkstar:~$ cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 15
model           : 4
model name      : Intel(R) Pentium(R) D CPU 2.80GHz
stepping        : 7
cpu MHz         : 2793.194
cache size      : 1024 KB
#27 lore raw
In reply to Paolo Ornati

Exactly constant timing in every iteration:

cycles: out 667, in 305

processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Celeron (Coppermine)
stepping : 3
cpu MHz : 497.582
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca
cmov pat pse36 mmx fxsr sse up
bogomips : 996.21
clflush size : 32

Quoted 62 lines · Paolo Ornati
Quoted 7 lines · On Wed, 12 Dec 2007 00:31:18 +0100 Rene Herman <[email protected]> wrote:

and on a PII 400 (Intel 440BX chipset) a constant:

rene@6bap:~/src/port80$ su -c ./port80
cycles: out 553, in 251

Results are (mostly) independent of compiler optimisation, but testing

with

Quoted 2 lines

an -O2 compile should be most useful. Thanks!

### Core2 Duo 1.8 GHz ###

X86_64 -m32 -O2:

$ for i in `seq 5`; do sudo ./port80; sleep 1; done
cycles: out 1498, in 964
cycles: out 1498, in 964
cycles: out 1499, in 964
cycles: out 1498, in 964
cycles: out 1498, in 965

processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz
stepping : 6
cpu MHz : 1864.805
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 3731.82
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

[...]

--

	Paolo Ornati
	Linux 2.6.24-rc4-g94545bad on x86_64

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#29 lore raw
In reply to Rene Herman
Quoted 4 lines · Rene Herman

Good day.

Would some people on x86 (both 32 and 64) be kind enough to compile and run the attached program? This is about testing how long I/O port access

model name : Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz

cycles: out 6490, in 3135
cycles: out 6484, in 3126
cycles: out 6511, in 3128
cycles: out 6500, in 3135
cycles: out 6492, in 3154
cycles: out 6506, in 3136
cycles: out 6516, in 3144
cycles: out 6489, in 3140
cycles: out 6492, in 3129
cycles: out 6507, in 3130

#36 lore raw
In reply to Rene Herman
$ for i in `seq 5`; do ./port80; sleep 1; done
cycles: out 5260, in 2372
cycles: out 5260, in 2384
cycles: out 5260, in 2323
cycles: out 5270, in 2382
cycles: out 5259, in 2323
$ cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 7
model name      : Pentium III (Katmai)
stepping        : 3
cpu MHz         : 501.208
cache size      : 512 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca 
cmov pat pse36 mmx fxsr sse
bogomips        : 993.28

#########

$ for i in `seq 5`; do ./port80; sleep 1; done
cycles: out 1214, in 1095
cycles: out 1215, in 1094
cycles: out 1214, in 1095
cycles: out 1216, in 1095
cycles: out 1213, in 1093
$ cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 11
model name      : Intel(R) Celeron(TM) CPU                1000MHz
stepping        : 1
cpu MHz         : 1002.285
cache size      : 256 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat 
pse36 mmx fxsr sse
bogomips        : 1998.84
#39 lore raw
In reply to Rene Herman
Quoted 6 lines · Rene Herman

Good day.

Would some people on x86 (both 32 and 64) be kind enough to compile and run the attached program? This is about testing how long I/O port access to port 0x80 takes. It measures in CPU cycles so CPU speed is crucial in reporting.

$ sudo ./port80
cycles: out 2729, in 1872
$ sudo ./port80
cycles: out 2729, in 1872
$ sudo ./port80
cycles: out 2711, in 1856
$ sudo ./port80
cycles: out 2711, in 1856

model name : Intel(R) Pentium(R) 4 CPU 1.90GHz
stepping : 2
cpu MHz : 1917.229
cache size : 256 KB

Signature · 2 lines
Luciano Rocha <[email protected]>
Eurotux Informática, S.A. <http://www.eurotux.com/>
#40 lore raw
In reply to Rene Herman
Quoted 15 lines · Rene Herman

Good day.

Would some people on x86 (both 32 and 64) be kind enough to compile and run the attached program? This is about testing how long I/O port access to port 0x80 takes. It measures in CPU cycles so CPU speed is crucial in reporting.

Posted a previous incarnation of this before, buried in the outb 0x80 thread which had a serialising problem. This one should as far as I can see measure the right thing though. Please yell if you disagree...

For me, on a Duron 1300 (AMD756 chipset) I have a constant:

rene@7ixe4:~/src/port80$ su -c ./port80
cycles: out 2400, in 2400
Quoted 7 lines

and on a PII 400 (Intel 440BX chipset) a constant:

rene@6bap:~/src/port80$ su -c ./port80
cycles: out 553, in 251

Results are (mostly) independent of compiler optimisation, but testing with an -O2 compile should be most useful. Thanks!

Since a lot of people reported timings for all the fancy new x86_64 hardware, I've not included those. Timings for my ancient machines still in service:

$ gcc -o port80 -O2 port80.c
$ sudo ./port80
cycles: out 1736, in 1735
$ sudo ./port80
cycles: out 1831, in 1827
$ sudo ./port80
cycles: out 1735, in 1735
$ sudo ./port80
cycles: out 1743, in 1737
$ sudo ./port80
cycles: out 1737, in 1734
$ cat /proc/cpuinfo
processor       : 0
vendor_id       : AuthenticAMD
cpu family      : 6
model           : 6
model name      : AMD Athlon(tm) MP 1800+
stepping        : 2
cpu MHz         : 1533.420
cache size      : 256 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov
pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow ts
bogomips        : 3069.09
clflush size    : 32

processor : 1
vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(tm) Processor
stepping : 2
cpu MHz : 1533.420
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow ts
bogomips : 3067.07
clflush size : 32

---

# ./port80
cycles: out 812, in 354
# ./port80
cycles: out 811, in 354
# ./port80
cycles: out 811, in 354
# ./port80
cycles: out 811, in 354
# cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 8
model name      : Pentium III (Coppermine)
stepping        : 1
cpu MHz         : 672.071
cache size      : 256 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 mmx fxsr sse
bogomips        : 1331.20

---

# ./port80
cycles: out 116, in 47
# ./port80
cycles: out 116, in 47
# ./port80
cycles: out 116, in 47
# ./port80
cycles: out 116, in 47
# cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 5
model           : 2
model name      : Pentium 75 - 200
stepping        : 12
cpu MHz         : 99.476
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : yes
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr mce cx8
bogomips        : 198.24

P133 clocked at 100MHz

#41 lore raw
In reply to Rene Herman
Quoted 6 lines · Rene Herman

Good day.

Would some people on x86 (both 32 and 64) be kind enough to compile and run the attached program? This is about testing how long I/O port access to port 0x80 takes. It measures in CPU cycles so CPU speed is crucial in reporting.

$ cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 8
model name      : Pentium III (Coppermine)
stepping        : 6
cpu MHz         : 930.347
cache size      : 256 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips        : 1861.99
clflush size    : 32

cycles: out 1183, in 706

cycles: out 1183, in 707

cycles: out 1182, in 706

cycles: out 1182, in 706

cycles: out 1183, in 706

cycles: out 1182, in 706

cycles: out 1182, in 706

cycles: out 1183, in 706

cycles: out 1183, in 707

cycles: out 1183, in 707

cycles: out 1183, in 706

cycles: out 1183, in 706

cycles: out 1183, in 706

cycles: out 1182, in 706

cycles: out 1183, in 707

cycles: out 1183, in 707

cycles: out 1183, in 706

cycles: out 1183, in 706

cycles: out 1182, in 706

cycles: out 1183, in 706

cycles: out 1183, in 706

cycles: out 1183, in 706

Dave.

#30 lore raw
In reply to Jiri Slaby
Quoted 5 lines · Jiri Slaby
Quoted 4 lines · Rene Herman

Good day.

Would some people on x86 (both 32 and 64) be kind enough to compile and run the attached program? This is about testing how long I/O port access

model name : Intel(R) Xeon(R) CPU E5335 @ 2.00GHz

cycles: out 3217, in 1898
cycles: out 3217, in 1898
cycles: out 3217, in 1898
cycles: out 3217, in 1898
cycles: out 3217, in 1898
cycles: out 3217, in 1898
cycles: out 3217, in 1898
cycles: out 3217, in 1898
cycles: out 3217, in 1898
cycles: out 3217, in 1898

model name : Dual Core AMD Opteron(tm) Processor 275
cycles: out 5508, in 5524
cycles: out 5509, in 5525
cycles: out 5510, in 5522
cycles: out 5512, in 5522
cycles: out 5512, in 5522
cycles: out 5510, in 5524
cycles: out 5510, in 5522
cycles: out 5511, in 5525
cycles: out 5513, in 5521
cycles: out 5509, in 5522

#9 lore raw
In reply to Rene Herman
Quoted 1 line · El Wed, 12 Dec 2007 01:16:06 +0100 Rene Herman <[email protected]> escribió:

On 12-12-07 01:09, Alejandro Riveira Fernández wrote:

[...]

Quoted 5 lines

Great, thanks much for reporting. Sort of interesting in itself that without -O2 you do still get correct results on 64-bit but for some other time.

You're the first one to go significantly below 1 us it seems.

:( I have seen the other msg and i have to say that the tests where done at
1GHz not at full speed. At full speed i see

cycles: out 3025, in 1653
cycles: out 3040, in 1708
cycles: out 3044, in 1650
cycles: out 3034, in 1652
cycles: out 3035, in 1652
cycles: out 3037, in 1652
cycles: out 3043, in 1709
cycles: out 3032, in 1648
cycles: out 3039, in 1652
cycles: out 3041, in 1652
cycles: out 3048, in 1704
cycles: out 3040, in 1650
cycles: out 3023, in 1631
cycles: out 3036, in 1652
cycles: out 3042, in 1706
cycles: out 3047, in 1708
cycles: out 3047, in 1711
cycles: out 3036, in 1652

Quoted 2 lines

Rene.

#42 lore raw
In reply to Rene Herman
Quoted 6 lines · Rene Herman

Good day.

Would some people on x86 (both 32 and 64) be kind enough to compile and run the attached program? This is about testing how long I/O port access to port 0x80 takes. It measures in CPU cycles so CPU speed is crucial in reporting.

vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
stepping : 6

cpu MHz : 2394.000
cycles: out 1830, in 1166

cpu MHz : 1596.000
cycles: out 1925, in 1266

##

vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 10

cpu MHz : 850.000
cycles: out 1142, in 475

cpu MHz : 700.000
cycles: out 914, in 406

##

vendor_id : AuthenticAMD
cpu family : 6
model : 7
model name : AMD Duron(tm) processor
stepping : 1

cpu MHz : 1300.108
cycles: out 2562, in 2562

##

vendor_id : GenuineIntel
cpu family : 6
model : 5
model name : Pentium II (Deschutes)
stepping : 2

cpu MHz : 449.242
cycles: out 607, in 272

Signature · 3 lines
Ville Syrjälä
[email protected]
http://www.sci.fi/~syrjala/
#12 lore raw
In reply to a message not in the archive
Quoted 14 lines · linux-os (Dick Johnson)
Quoted 6 lines · On Tue, 11 Dec 2007, [utf-8] Alejandro Riveira Fern?ndez wrote:

On my AMD 3800 X2 (2000MHz) ULi M1697 2.6.24-rc5 i get:

cycles: out 1844674407370808, in 1844674407369087

It is not constant but variations are not significant afaics

It looks as though this hardware does not have a port 0x80 and its access is trapped by the hardware with a long time-out! This may be the reason when the _p was called "harmful" on this platform!

Quoted 4 lines

I'm not sure the "rules" for port access allow for this kind of behavior. This design may be defective, needing to be brought to the attention of the vendor. A decent vendor would update a FPGA and provide code to burn a new BIOS.

I'm afraid it's just the test that is "defective" as 64-bit code. For some reason "=A" doesn't mean edx:eax on amd64 even though it's a useful register pair to be able to name there as well. Didn't catch that being without amd64 machines myself.

Oh well. gcc -m32 fixes it...

Rene.

#13 lore raw
Quoted 21 lines · Rene Herman
Quoted 14 lines · linux-os (Dick Johnson)
Quoted 6 lines · On Tue, 11 Dec 2007, [utf-8] Alejandro Riveira Fern?ndez wrote:

On my AMD 3800 X2 (2000MHz) ULi M1697 2.6.24-rc5 i get:

cycles: out 1844674407370808, in 1844674407369087

It is not constant but variations are not significant afaics

It looks as though this hardware does not have a port 0x80 and its access is trapped by the hardware with a long time-out! This may be the reason when the _p was called "harmful" on this platform!

Quoted 4 lines

I'm not sure the "rules" for port access allow for this kind of behavior. This design may be defective, needing to be brought to the attention of the vendor. A decent vendor would update a FPGA and provide code to burn a new BIOS.

Quoted 9 lines

I'm afraid it's just the test that is "defective" as 64-bit code. For some reason "=A" doesn't mean edx:eax on amd64 even though it's a useful register pair to be able to name there as well. Didn't catch that being without amd64 machines myself.

Oh well. gcc -m32 fixes it...

Rene.

Yep. By bad. I actually believed the returned value!

Cheers,
Dick Johnson
Penguin : Linux version 2.6.22.1 on an i686 machine (5588.30 BogoMips). My book : http://www.AbominableFirebug.com/
_

****************************************************************
The information transmitted in this message is confidential and may be privileged. Any review, retransmission, dissemination, or other use of this information by persons or entities other than the intended recipient is prohibited. If you are not the intended recipient, please notify Analogic Corporation immediately - by replying to this message or by sending an email to [email protected] - and destroy all copies of this information, including any attachments, without reading or disclosing them.

Thank you.

#37 lore raw
In reply to Juergen Beisert
Quoted 7 lines · Juergen Beisert
$ for i in `seq 5`; do ./port80; sleep 1; done
cycles: out 5260, in 2372
cycles: out 5260, in 2384
cycles: out 5260, in 2323
cycles: out 5270, in 2382
cycles: out 5259, in 2323
Quoted 8 lines
$ cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 7
model name      : Pentium III (Katmai)
stepping        : 3
cpu MHz         : 501.208

This one's really wrong. This would be 10 microsecs. I suppose the machine/bus was heavily loaded or something?

Quoted 7 lines
$ for i in `seq 5`; do ./port80; sleep 1; done
cycles: out 1214, in 1095
cycles: out 1215, in 1094
cycles: out 1214, in 1095
cycles: out 1216, in 1095
cycles: out 1213, in 1093
Quoted 6 lines
$ cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 11
model name      : Intel(R) Celeron(TM) CPU                1000MHz

This one's normal again...

Rene.

#38 lore raw
Quoted 17 lines · Rene Herman
Quoted 7 lines · Juergen Beisert
$ for i in `seq 5`; do ./port80; sleep 1; done
cycles: out 5260, in 2372
cycles: out 5260, in 2384
cycles: out 5260, in 2323
cycles: out 5270, in 2382
cycles: out 5259, in 2323
Quoted 8 lines
$ cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 7
model name      : Pentium III (Katmai)
stepping        : 3
cpu MHz         : 501.208
Quoted 2 lines

This one's really wrong. This would be 10 microsecs. I suppose the machine/bus was heavily loaded or something?

Ups, your are right:

$ cat /proc/acpi/processor/CPU0/throttling
state count:             2
active state:            T1
states:
    T0:                  00%
   *T1:                  50%

With T0 it get:

$ for i in `seq 5`; do ./port80; sleep 1; done
cycles: out 684, in 280
cycles: out 684, in 280
cycles: out 684, in 280
cycles: out 684, in 280
cycles: out 684, in 280

Juergen

#44 lore raw
In reply to Rene Herman
Quoted 1 line · Rene Herman

cc -W -Wall -O2 -o port80 port80.c

On a laptop with a CoreDuo T2080/1.73GHz, but running on battery at 800 MHz (on-demand):

(0)rukbat:~/tmp% for i in {1..10}; do
sudo ./port80
done
cycles: out 3575, in 2844
cycles: out 3589, in 2923
cycles: out 3672, in 2864
cycles: out 3575, in 2843
cycles: out 3607, in 2859
cycles: out 3623, in 2877
cycles: out 3604, in 2848
cycles: out 3575, in 2849
cycles: out 3598, in 2861
cycles: out 3613, in 2861

With a cpu-hog running, cpufreq reporting 1.73GHz:

(0)rukbat:~/tmp% for i in {1..10}; do
sudo ./port80
done
cycles: out 3446, in 2652
cycles: out 3499, in 2668
cycles: out 3395, in 2578
cycles: out 3452, in 2662
cycles: out 3448, in 2662
cycles: out 3622, in 2754
cycles: out 3457, in 2662
cycles: out 3451, in 2660
cycles: out 3581, in 2850
cycles: out 3477, in 2696

HTH,
Romano

Romano

Signature · 8 lines
Sorry for the disclaimer --- ¡I cannot stop it!



--
La presente comunicación tiene carácter confidencial y es para el exclusivo uso del destinatario indicado en la misma. Si Ud. no es el destinatario indicado, le informamos que cualquier forma de distribución, reproducción o uso de esta comunicación y/o de la información contenida en la misma están estrictamente prohibidos por la ley. Si Ud. ha recibido esta comunicación por error, por favor, notifíquelo inmediatamente al remitente contestando a este mensaje y proceda a continuación a destruirlo. Gracias por su colaboración.

This communication contains confidential information. It is for the exclusive use of the intended addressee. If you are not the intended addressee, please note that any form of distribution, copying or use of this communication or the information in it is strictly prohibited by law. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy this message. Thank you for your cooperation. 
#31 lore raw
In reply to Jiri Slaby

On 12-12-07 12:25, Jiri Slaby wrote:

Thanks for reporting! You have two results that are somewhat off:

Quoted 2 lines

Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz
cycles: out 6500, in 3135

6500 / 3000 = 2.17. Fairly high...

Quoted 2 lines

Intel(R) Xeon(R) CPU E5335 @ 2.00GHz
cycles: out 3217, in 1898

3217 / 2000 = 1.61. Okay.

Quoted 2 lines

Dual Core AMD Opteron(tm) Processor 275
cycles: out 5508, in 5524

2200 MHz right?

5508 / 2200 = 2.50. Very high.

Nothing was dozing off in some ACPI sleep state or something?

Rene.

#32 lore raw
In reply to Jiri Slaby

On 12-12-07 12:25, Jiri Slaby wrote:

Thanks for reporting! You have two results that are somewhat off:

Quoted 2 lines

Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz
cycles: out 6500, in 3135

6500 / 3000 = 2.17. Fairly high...

Quoted 2 lines

Intel(R) Xeon(R) CPU E5335 @ 2.00GHz
cycles: out 3217, in 1898

3217 / 2000 = 1.61. Okay.

Quoted 2 lines

Dual Core AMD Opteron(tm) Processor 275
cycles: out 5508, in 5524

2200 MHz right?

5508 / 2200 = 2.50. Very high.

Nothing was dozing off in some ACPI sleep state or something?

Rene.

#46 lore raw
In reply to Rene Herman

My results, PIII, Dual 550Mhz Xeon.

jfsnew:~/src> sudo ./port80
cycles: out 774, in 332
jfsnew:~/src> sudo ./port80
cycles: out 774, in 332
jfsnew:~/src> sudo ./port80
cycles: out 774, in 332
jfsnew:~/src> sudo ./port80
cycles: out 774, in 332
jfsnew:~/src> sudo ./port80
cycles: out 774, in 332
jfsnew:~/src> sudo ./port80
cycles: out 774, in 332
jfsnew:~/src> sudo ./port80
cycles: out 774, in 332
jfsnew:~/src> sudo ./port80
cycles: out 775, in 332
jfsnew:~/src> sudo ./port80
cycles: out 774, in 332
jfsnew:~/src> sudo ./port80
cycles: out 774, in 332
jfsnew:~/src> sudo ./port80
cycles: out 774, in 332
jfsnew:~/src> sudo ./port80
cycles: out 775, in 335

jfsnew:~/src> cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 547.216
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 mmx fxsr sse
bogomips : 1095.01
clflush size : 32

#45 lore raw
In reply to Romano Giannetti
Quoted 3 lines · Romano Giannetti

On a laptop with a CoreDuo T2080/1.73GHz, but running on battery at 800 MHz (on-demand):

cycles: out 3575, in 2844

Okay, I'm going to ignore this one. This would be 4 microsecs but there are sleep states involved, and if a piece of hardware would work only when the system went to sleep I'd call it broken...

Quoted 3 lines

With a cpu-hog running, cpufreq reporting 1.73GHz:

cycles: out 3446, in 2652

So this one will do I guess. The test program disables interrupts and as such, the cpu-hog shouldn't have interfered with the measurement. Thanks!

Rene.

#47 lore raw
In reply to Rene Herman
pancs:/tmp# for((i=0;i<20;i++)); do ./port80; done
cycles: out 4098, in 2532
cycles: out 3951, in 2389
cycles: out 4043, in 2485
cycles: out 4058, in 2393
cycles: out 4056, in 2509
cycles: out 4063, in 2394
cycles: out 4076, in 2508
cycles: out 4143, in 2395
cycles: out 4062, in 2502
cycles: out 4084, in 2383
cycles: out 4055, in 2510
cycles: out 4228, in 2410
cycles: out 4071, in 2508
cycles: out 4062, in 2502
cycles: out 3982, in 2398
cycles: out 4103, in 2391
cycles: out 4160, in 2404
cycles: out 4010, in 2462
cycles: out 4105, in 2449
cycles: out 4028, in 2477

---------

processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 3.00GHz
stepping : 9
cpu MHz : 3150.045
cache size : 512 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr
bogomips : 6303.37
clflush size : 64

processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 3.00GHz
stepping : 9
cpu MHz : 3150.045
cache size : 512 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr
bogomips : 6300.14
clflush size : 64

#48 lore raw
In reply to Rene Herman
Quoted 18 lines · On Wednesday 12 December 2007 00:31:18 Rene Herman wrote:

Good day.

Would some people on x86 (both 32 and 64) be kind enough to compile and run the attached program? This is about testing how long I/O port access to port 0x80 takes. It measures in CPU cycles so CPU speed is crucial in reporting.

Posted a previous incarnation of this before, buried in the outb 0x80 thread which had a serialising problem. This one should as far as I can see measure the right thing though. Please yell if you disagree...

For me, on a Duron 1300 (AMD756 chipset) I have a constant:

rene@7ixe4:~/src/port80$ su -c ./port80
cycles: out 2400, in 2400

and on a PII 400 (Intel 440BX chipset) a constant:

Quoted 7 lines
rene@6bap:~/src/port80$ su -c ./port80
cycles: out 553, in 251

Results are (mostly) independent of compiler optimisation, but testing with an -O2 compile should be most useful. Thanks!

Rene.

Cyrix MII PR300 (225MHz), i430TX: cycles: out 263, in 93
Pentium MMX 166MHz @133MHz, VIA VPX: cycles: out 163, in 163

Celeron 433MHz, i440BX:              cycles: out 620, in 305
Celeron 1.3GHz, i440BX:              cycles: out 2114, in 849
Celeron 1.7GHz (P4-based), i845:     cycles: out 2178, in 1651
Pentium 4 3.2GHz, i925X:             cycles: out 2824, in 1899
Xeon E5310 1.6GHz, Dell PE1950       cycles: out 2631, in 1606
Xeon 3050 2.13GHz, Dell PE860        cycles: out 3367, in 1959
Signature · 1 line
Ondrej Zary
#50 lore raw
In reply to Rene Herman

[Rene Herman - Wed, Dec 12, 2007 at 12:31:18AM +0100]

Quoted 18 lines

Good day.

Would some people on x86 (both 32 and 64) be kind enough to compile and run the attached program? This is about testing how long I/O port access to port 0x80 takes. It measures in CPU cycles so CPU speed is crucial in reporting.

Posted a previous incarnation of this before, buried in the outb 0x80 thread which had a serialising problem. This one should as far as I can see measure the right thing though. Please yell if you disagree...

For me, on a Duron 1300 (AMD756 chipset) I have a constant:

rene@7ixe4:~/src/port80$ su -c ./port80
cycles: out 2400, in 2400

and on a PII 400 (Intel 440BX chipset) a constant:

Quoted 7 lines
rene@6bap:~/src/port80$ su -c ./port80
cycles: out 553, in 251

Results are (mostly) independent of compiler optimisation, but testing with an -O2 compile should be most useful. Thanks!

Rene.

| /* gcc -W -Wall -O2 -o port80 port80.c */
| 
| #include <stdlib.h>
| #include <stdio.h>
| 
| #include <sys/io.h>
| 
| #define LOOPS 10000
| 
| inline unsigned long long rdtsc(void)
| {
| 	unsigned long long tsc;
| 
| 	asm volatile ("rdtsc": "=A" (tsc));
| 
| 	return tsc;
| }
| 
| inline void serialize(void)
| {
| 	asm volatile ("cpuid": : : "eax", "ebx", "ecx", "edx");
| }
| 
| int main(void)
| {
| 	unsigned long long start;
| 	unsigned long long overhead; 
| 	unsigned long long output;
| 	unsigned long long input;
| 	int i;
| 
| 	if (iopl(3) < 0) {
| 		perror("iopl");
| 		return EXIT_FAILURE;
| 	}
| 
| 	asm volatile ("cli");
| 	start = rdtsc();
| 	for (i = 0; i < LOOPS; i++) {
| 	 	serialize();	
| 		serialize();
| 	}
| 	overhead = rdtsc() - start;
| 
| 	start = rdtsc() + overhead;
| 	for (i = 0; i < LOOPS; i++) {
| 		serialize();
| 		asm volatile ("outb %al, $0x80");
| 		serialize();
| 	}
| 	output = rdtsc() - start;
| 
| 	start = rdtsc() + overhead;
| 	for (i = 0; i < LOOPS; i++) {
| 		serialize();
| 		asm volatile ("inb $0x80, %%al": : : "al");
| 		serialize();
| 	}
| 	input = rdtsc() - start;
| 	asm volatile ("sti");
| 
| 	output /= LOOPS;
| 	input  /= LOOPS;
| 	printf("cycles: out %llu, in %llu\n", output, input);
| 
| 	return EXIT_SUCCESS;
| }

Here we go (for 1000 times started) ;)

---
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1429, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1429, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1429, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1429, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1429, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1427, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1429, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1449
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1427, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1449
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1449
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1429, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1429, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1449
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1429, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1429, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1429, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1429, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
cycles: out 1428, in 1450
---

processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 36
model name : AMD Turion(tm) 64 Mobile Technology ML-30
stepping : 2
cpu MHz : 800.000
cache size : 1024 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni lahf_lm ts fid vid ttp tm stc
bogomips : 1601.04
clflush size : 64

Cyrill

#49 lore raw
In reply to Ondrej Zary
Quoted 10 lines · Ondrej Zary

Cyrix MII PR300 (225MHz), i430TX: cycles: out 263, in 93
Pentium MMX 166MHz @133MHz, VIA VPX: cycles: out 163, in 163

Celeron 433MHz, i440BX:              cycles: out 620, in 305
Celeron 1.3GHz, i440BX:              cycles: out 2114, in 849
Celeron 1.7GHz (P4-based), i845:     cycles: out 2178, in 1651
Pentium 4 3.2GHz, i925X:             cycles: out 2824, in 1899
Xeon E5310 1.6GHz, Dell PE1950       cycles: out 2631, in 1606
Xeon 3050 2.13GHz, Dell PE860        cycles: out 3367, in 1959

So between 0.88 and 1.6 µs for the out case; 0.4 and 1.0 µs for the in case.

-hpa

#51 lore raw
In reply to Rene Herman
Quoted 11 lines · Rene Herman

Good day.

Would some people on x86 (both 32 and 64) be kind enough to compile and run the attached program? This is about testing how long I/O port access to port 0x80 takes. It measures in CPU cycles so CPU speed is crucial in reporting.

Posted a previous incarnation of this before, buried in the outb 0x80 thread which had a serialising problem. This one should as far as I can see measure the right thing though. Please yell if you disagree...

Hi,

Tested on 2 systems.

System I
------------
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 47
model name : AMD Athlon(tm) 64 Processor 3200+
stepping : 2
cpu MHz : 2000.000
cache size : 512 KB
fpu : yes
fpu_exception : yes

Motherboard: Asus A9N-E

With -m32:

edwin@lightspeed2:~$ sudo ./port80
cycles: out 1107, in 1067
edwin@lightspeed2:~$ sudo ./port80
cycles: out 1107, in 1067
edwin@lightspeed2:~$ sudo ./port80
cycles: out 1107, in 1067
edwin@lightspeed2:~$ sudo ./port80
cycles: out 1107, in 1067
edwin@lightspeed2:~$ sudo ./port80
cycles: out 1107, in 1067
edwin@lightspeed2:~$ sudo ./port80
cycles: out 619, in 583
edwin@lightspeed2:~$ sudo ./port80
cycles: out 619, in 583
edwin@lightspeed2:~$ sudo ./port80
cycles: out 1107, in 1067
edwin@lightspeed2:~$ sudo ./port80
cycles: out 1107, in 1067
edwin@lightspeed2:~$ sudo ./port80
cycles: out 1107, in 1067
edwin@lightspeed2:~$ sudo ./port80
cycles: out 1107, in 1067
edwin@lightspeed2:~$ sudo ./port80
cycles: out 1107, in 1067

After making the __asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi)); I get this with 64:

edwin@lightspeed2:~$ sudo ./port80
cycles: out 1107, in 1067
edwin@lightspeed2:~$ sudo ./port80
cycles: out 1107, in 1067
edwin@lightspeed2:~$ sudo ./port80
cycles: out 1107, in 1067
edwin@lightspeed2:~$ sudo ./port80
cycles: out 1107, in 1067
edwin@lightspeed2:~$ sudo ./port80
cycles: out 1107, in 1067
edwin@lightspeed2:~$ sudo ./port80
cycles: out 1107, in 1067
edwin@lightspeed2:~$ sudo ./port80
cycles: out 1107, in 1067
edwin@lightspeed2:~$ sudo ./port80
cycles: out 1107, in 1067
edwin@lightspeed2:~$ sudo ./port80
cycles: out 618, in 583
edwin@lightspeed2:~$ sudo ./port80
cycles: out 618, in 583
edwin@lightspeed2:~$ sudo ./port80
cycles: out 1107, in 1067

If I stop cpudyn I get a constant 618/583.

System II
------------

processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 14
model name : Genuine Intel(R) CPU T2300 @ 1.66GHz
stepping : 8
cpu MHz : 1667.000
cache size : 2048 KB
physical id : 0
siblings : 2

processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 14
model name : Genuine Intel(R) CPU T2300 @ 1.66GHz
stepping : 8
cpu MHz : 1667.000
cache size : 2048 KB
physical id : 0
siblings : 2

Dell Inspiron 6400, Intel Core Duo (ICH7 chipset)

thunder:/home/edwin# ./port80
cycles: out 2480, in 1867
thunder:/home/edwin# ./port80
cycles: out 2482, in 1865
thunder:/home/edwin# ./port80
cycles: out 2968, in 1893
thunder:/home/edwin# ./port80
cycles: out 1991, in 1372
thunder:/home/edwin# ./port80
cycles: out 1979, in 1366
thunder:/home/edwin# ./port80
cycles: out 2473, in 1865
thunder:/home/edwin# ./port80
cycles: out 2484, in 1869

After setting CPU governor to performance:

# ./port80
cycles: out 2368, in 1783
thunder:/home/edwin# ./port80
cycles: out 2377, in 1783
thunder:/home/edwin# ./port80
cycles: out 2367, in 1774
thunder:/home/edwin# ./port80
cycles: out 2370, in 1780
thunder:/home/edwin# ./port80
cycles: out 2365, in 1782
thunder:/home/edwin# ./port80
cycles: out 2369, in 1774
thunder:/home/edwin# ./port80
cycles: out 2366, in 1784
thunder:/home/edwin# ./port80
cycles: out 2379, in 1786
thunder:/home/edwin# ./port80
cycles: out 2367, in 1773
thunder:/home/edwin# ./port80
cycles: out 2376, in 1783
thunder:/home/edwin# ./port80
cycles: out 2360, in 1784
thunder:/home/edwin# ./port80
cycles: out 2367, in 1783
thunder:/home/edwin# ./port80
cycles: out 2370, in 1783
thunder:/home/edwin# ./port80
cycles: out 2382, in 1782

Also tried in a loop, but values are not constant:
while true; do ./port80; done
cycles: out 2415, in 1818
cycles: out 2405, in 1817
cycles: out 2414, in 1810
cycles: out 2411, in 1819
cycles: out 2407, in 1821
cycles: out 2410, in 1820
cycles: out 2418, in 1821
cycles: out 2408, in 1847
cycles: out 2404, in 1805
cycles: out 2411, in 1858
cycles: out 2395, in 1765
cycles: out 2377, in 1786
cycles: out 2378, in 1813
cycles: out 2395, in 1800
cycles: out 2381, in 1793
cycles: out 2382, in 1790
cycles: out 2399, in 1835
cycles: out 1928, in 1327
cycles: out 2410, in 1781
cycles: out 1996, in 1287
cycles: out 2369, in 1768
cycles: out 2401, in 1805
cycles: out 2395, in 1802
cycles: out 2389, in 1786
cycles: out 2359, in 1768
cycles: out 2495, in 1858
cycles: out 2408, in 1809
cycles: out 2919, in 1859
cycles: out 2404, in 1798
cycles: out 2393, in 1791
cycles: out 2882, in 1797
cycles: out 2404, in 1789
cycles: out 2406, in 1785
cycles: out 2393, in 1840
cycles: out 2498, in 1818
cycles: out 2402, in 1805
cycles: out 2888, in 1858
cycles: out 2397, in 1802
cycles: out 2411, in 1810
cycles: out 2396, in 1788
cycles: out 2362, in 1780
cycles: out 2861, in 1785
cycles: out 2380, in 1780
cycles: out 2357, in 1785
cycles: out 2342, in 1783
cycles: out 1916, in 1294
cycles: out 2358, in 1768
cycles: out 2371, in 1763
cycles: out 2386, in 1783
cycles: out 1919, in 1320
cycles: out 2355, in 1782
cycles: out 2330, in 1787
cycles: out 2350, in 1781
cycles: out 1881, in 1269
cycles: out 2378, in 1768
cycles: out 2381, in 1739
cycles: out 2365, in 1768
cycles: out 2362, in 1759
cycles: out 2368, in 1739
cycles: out 2354, in 1775
cycles: out 2375, in 1783
cycles: out 2369, in 1785
cycles: out 2361, in 1769
cycles: out 2382, in 1785
cycles: out 2370, in 1783

--Edwin

#53 lore raw
In reply to Rene Herman
Quoted 5 lines · Rene Herman

Good day.

Would some people on x86 (both 32 and 64) be kind enough to compile and run the attached program? This is about testing how long I/O port access to port 0x80 takes. It measures in CPU cycles so CPU speed is crucial in reporting.

model name : Intel(R) Pentium(R) 4 CPU 3.20GHz
cpu MHz : 3201.345

cycles: out 3026, in 2204
cycles: out 3031, in 2182
cycles: out 3019, in 2196
cycles: out 3030, in 2201
cycles: out 3013, in 2186

-sb

#33 lore raw
In reply to Jiri Slaby
Quoted 8 lines · Jiri Slaby
Quoted 5 lines · Jiri Slaby
Quoted 4 lines · Rene Herman

Good day.

Would some people on x86 (both 32 and 64) be kind enough to compile and run the attached program? This is about testing how long I/O port access

model name : Intel(R) Xeon(R) CPU E5335 @ 2.00GHz cycles: out 3217, in 1898

1.6 µs, on the high end....

Quoted 2 lines

model name : Dual Core AMD Opteron(tm) Processor 275
cycles: out 5508, in 5524

Definitely an outlier; 2.5 µs here.

-hpa

#52 lore raw
In reply to Török Edwin

I have been having a fun time testing this on my AMD64x2 system.

Since out's to port 80 hang the system hard after a while, I can run a test just after booting, but the next run will typically hang it.

I did also test two ports thought to be unused. They do *not* hang the system. Thus apparently there is some device responding to port 80!

Running the (slightly modified to test 3 ports instead of just port 80) test when the CPU is running at 800 MHz, here's what I get for port 80 and port ec and port ef.

port 80:   cycles: out 1430, in 792
port ef:    cycles: out 1431, in 1378
port ec:   cycles: out 1432, in 1372

[Note: port 80, when it doesn't hang, which is very often, responds to a read twice as fast as a port which is "not there". Typically though, the second time I run the test, the system freezes solid. Seems like evidence of a present device, not a missing one. Also, port 80 responds when booted with acpi=off, but never seems to hang - sounds like ACPI causes it to be active in some way]
----------------------------

System info: HP Pavilion dv9000z laptop (AMD64x2)

PCI bus controller is nVidia MCP51.
/proc/cpuinfo

processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 72
model name : AMD Turion(tm) 64 X2 Mobile Technology TL-60
stepping : 2
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow rep_good pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy
bogomips : 1608.35
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc

processor : 1
vendor_id : AuthenticAMD
cpu family : 15
model : 72
model name : AMD Turion(tm) 64 X2 Mobile Technology TL-60
stepping : 2
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow rep_good pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy
bogomips : 1608.35
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc

#54 lore raw
In reply to SL Baur
Quoted 8 lines · SL Baur

model name : Intel(R) Pentium(R) 4 CPU 3.20GHz
cpu MHz : 3201.345

cycles: out 3026, in 2204
cycles: out 3031, in 2182
cycles: out 3019, in 2196
cycles: out 3030, in 2201
cycles: out 3013, in 2186

Thank you. I just posted the combined results, although I see it's not made it to the list yet, probably due to a somewhat overly broad CC...

These results fit the pattern.

Rene.

#34 lore raw
In reply to H. Peter Anvin
Quoted 8 lines · H. Peter Anvin
Quoted 1 line

model name : Intel(R) Xeon(R) CPU E5335 @ 2.00GHz cycles: out 3217, in 1898

1.6 µs, on the high end....

Quoted 2 lines

model name : Dual Core AMD Opteron(tm) Processor 275
cycles: out 5508, in 5524

Definitely an outlier; 2.5 µs here.

Jah, I don't trust that one. Just posted the complete results:

http://lkml.org/lkml/2007/12/12/309

Rene.

#23 lore raw
In reply to Kyle McMartin
Quoted 5 lines · Kyle McMartin
Quoted 1 line · Rene Herman
	asm volatile ("rdtsc": "=A" (tsc));

rdtsc returns a 64-bit value in two 32-bit regs, you need to do

Quoted 9 lines

inline unsigned long long rdtsc(void)

{
	unsigned int lo, hi;
	asm volatile ("rdtsc": "=a" (lo), "=d" (hi));
	return (unsigned long long)hi << 32 | lo;
}

as in msr.h, otherwise you'll only be looking at the value in %rax.

"=A" works on 32-bit systems (only), obviously, and gcc will generally produce slightly better code as a result (gcc could really use a register renaming/copy propagation step *after* multi-register entities are broken apart, at least on architectures which don't have register pairs as a hardware constraint.)

-hpa

#24 lore raw
Quoted 3 lines

"=A" works on 32-bit systems (only), obviously, and gcc will generally produce slightly better code as a result (gcc could really use a register renaming/copy propagation step *after* multi-register entities

I believe gcc 4.3 (or maybe 4.2) does that already -- it splits them much earlier.

-Andi

#25 lore raw
Quoted 3 lines · Andi Kleen
Quoted 1 line

"=A" works on 32-bit systems (only), obviously, and gcc will generally produce slightly better code as a result (gcc could really use a register renaming/copy propagation step *after* multi-register entities

I believe gcc 4.3 (or maybe 4.2) does that already -- it splits them much earlier.

Probably 4.3, then. I don't see 4.2 doing that, or at least not very successfully. Which is fine, I'm sure they had bigger fish to fry. Good to hear it has gotten some attention recently.

-hpa

#10 lore raw
In reply to Rene Herman
Quoted 22 lines · Rene Herman
Quoted 14 lines · Alejandro Riveira Fernández
Quoted 6 lines
Quoted 5 lines

On my AMD 3800 X2 (2000MHz) ULi M1697 2.6.24-rc5 i get:

cycles: out 1844674407370808, in 1844674407369087

It is not constant but variations are not significant afaics

Eh, oh, I guess you need to compile as a 32-bit binary...

I tried without -O2 as Nigel Cunningham...

cycles: out 1562, in 865
cycles: out 1562, in 866
cycles: out 1555, in 858
cycles: out 1562, in 866

Quoted 5 lines

With -m32 -O2
cycles: out 1566, in 876
cycles: out 1555, in 865
cycles: out 1594, in 931
cycles: out 1559, in 874

Quoted 3 lines

Great, thanks much for reporting. Sort of interesting in itself that without -O2 you do still get correct results on 64-bit but for some other time.

You're the first one to go significantly below 1 us it seems.

Make sure the CPU is actually running at full frequency.

It probably would have been better to have used gettimeofday() around a sufficiently big loop, so that we would have gotten wall time rather than cycles.

-hpa

#55 lore raw
In reply to Rene Herman
Quoted 6 lines · Rene Herman

Good day.

Would some people on x86 (both 32 and 64) be kind enough to compile and run the attached program? This is about testing how long I/O port access to port 0x80 takes. It measures in CPU cycles so CPU speed is crucial in reporting.

root@dragon:/home/juhl# uname -a
Linux dragon 2.6.24-rc3-g2ffbb837 #7 SMP PREEMPT Mon Nov 19 22:16:27
CET 2007 i686 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+
AuthenticAMD GNU/Linux
root@dragon:/home/juhl# cat /proc/cpuinfo
processor       : 0
vendor_id       : AuthenticAMD
cpu family      : 15
model           : 35
model name      : AMD Athlon(tm) 64 X2 Dual Core Processor 4400+
stepping        : 2
cpu MHz         : 2200.000
cache size      : 1024 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext
fxsr_opt lm 3dnowext 3dnow pni lahf_lm cmp_legacy ts fid vid ttp
bogomips        : 4401.67
clflush size    : 64

processor : 1
vendor_id : AuthenticAMD
cpu family : 15
model : 35
model name : AMD Athlon(tm) 64 X2 Dual Core Processor 4400+
stepping : 2
cpu MHz : 2200.000
cache size : 1024 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni lahf_lm cmp_legacy ts fid vid ttp
bogomips : 4399.52
clflush size : 64

root@dragon:/home/juhl# for i in $(seq 1 10); do ./port80 ; sleep 1 ; done
cycles: out 1839, in 1715
cycles: out 1728, in 1604
cycles: out 1762, in 1714
cycles: out 1770, in 1722
cycles: out 1759, in 1723
cycles: out 1764, in 1723
cycles: out 1762, in 1712
cycles: out 1761, in 1723
cycles: out 1771, in 1715
cycles: out 1770, in 1709
Signature · 3 lines
Jesper Juhl <[email protected]>
Don't top-post  http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please      http://www.expita.com/nomime.html
#56 lore raw
In reply to Rene Herman
Quoted 5 lines · Rene Herman

Would some people on x86 (both 32 and 64) be kind enough to compile and run the attached program? This is about testing how long I/O port access to port 0x80 takes. It measures in CPU cycles so CPU speed is crucial in reporting.

Transmeta TM5800 CPU with nominal frequency 933 MHz, but it has a hardware(!) 'ondemand' governor over the range of frequencies that the user allowed scaling over, irrespective of the software governor. (That is, if the CPU can do 300,533 and 933 MHz, and setting the min/max to 300/533 will cause the hardware to 'ondemand' between 300 and 533 only. And that even if 'performance' is set on the software side - so the only way to enforce 'performance' is to actually set min=933.)

00:46 takeshi:../cpu0/cpufreq # echo 300000 >scaling_min_freq 00:46 takeshi:../cpu0/cpufreq # echo 933000 >scaling_max_freq 00:42 takeshi:/dev/shm # for ((x=1;x<=10;++x)); do ./port80 ; done
cycles: out 1514, in 584
cycles: out 1371, in 516
cycles: out 1291, in 472
cycles: out 1304, in 437
cycles: out 1308, in 410
cycles: out 1315, in 419
cycles: out 1315, in 419
cycles: out 1314, in 419
cycles: out 1315, in 420
cycles: out 1315, in 419
00:44 takeshi:/dev/shm # for ((x=1;x<=10;++x)); do ./port80 ; done
cycles: out 1511, in 596
cycles: out 1373, in 517
cycles: out 1293, in 470
cycles: out 1294, in 424
cycles: out 1304, in 414
cycles: out 1315, in 420
cycles: out 1313, in 418
cycles: out 1313, in 418
cycles: out 1314, in 420
cycles: out 1314, in 419

Increasing x above 10 yields only 1313-1315 values, so nothing more to see. Note the values < 1313!! They only happen during scaling.
(I think scaling is the most important sideexercise in this test, even on hardware which does not have hardware governors - e.g. your average Intel/AMD CPUs.)

Single frequencies:
00:46 takeshi:../cpu0/cpufreq # echo 933000 >scaling_min_freq 00:46 takeshi:../cpu0/cpufreq # echo 933000 >scaling_max_freq 00:46 takeshi:../cpu0/cpufreq # for ((x=1;x<=10;++x)); do /dev/shm/port80 ;
donecycles: out 1314, in 419
cycles: out 1315, in 420
cycles: out 1314, in 419
cycles: out 1312, in 417
cycles: out 1315, in 420
cycles: out 1314, in 419
cycles: out 1313, in 419
cycles: out 1313, in 419
cycles: out 1314, in 419
cycles: out 1312, in 418

00:47 takeshi:../cpu0/cpufreq # echo 533000 >scaling_min_freq 00:47 takeshi:../cpu0/cpufreq # echo 533000 >scaling_max_freq 00:49 takeshi:../cpu0/cpufreq # for ((x=1;x<=10;++x)); do /dev/shm/port80 ;
donecycles: out 1372, in 508
cycles: out 1370, in 509
cycles: out 1372, in 515
cycles: out 1372, in 503
cycles: out 1372, in 503
cycles: out 1370, in 509
cycles: out 1368, in 513
cycles: out 1372, in 516
cycles: out 1372, in 504
cycles: out 1372, in 516

00:47 takeshi:../cpu0/cpufreq # echo 300000 >scaling_min_freq 00:47 takeshi:../cpu0/cpufreq # echo 300000 >scaling_max_freq 00:48 takeshi:../cpu0/cpufreq # for ((x=1;x<=10;++x)); do /dev/shm/port80 ;
donecycles: out 1515, in 650
cycles: out 1516, in 649
cycles: out 1517, in 651
cycles: out 1513, in 645
cycles: out 1514, in 649
cycles: out 1516, in 644
cycles: out 1517, in 651
cycles: out 1516, in 644
cycles: out 1512, in 647
cycles: out 1514, in 649

#57 lore raw
Quoted 10 lines · Jan Engelhardt

Transmeta TM5800 CPU with nominal frequency 933 MHz, but it has a hardware(!) 'ondemand' governor over the range of frequencies that the user allowed scaling over, irrespective of the software governor. (That is, if the CPU can do 300,533 and 933 MHz, and setting the min/max to 300/533 will cause the hardware to 'ondemand' between 300 and 533 only. And that even if 'performance' is set on the software side - so the only way to enforce 'performance' is to actually set min=933.)

Quoted 4 lines

00:46 takeshi:../cpu0/cpufreq # echo 300000 >scaling_min_freq 00:46 takeshi:../cpu0/cpufreq # echo 933000 >scaling_max_freq 00:42 takeshi:/dev/shm # for ((x=1;x<=10;++x)); do ./port80 ; done
cycles: out 1514, in 584

^ most likely 300 MHz state

Quoted 1 line

cycles: out 1371, in 516

^ 533 MHz state

Quoted 1 line

cycles: out 1291, in 472

^ ??

Quoted 1 line

cycles: out 1304, in 437

^ ??

Quoted 1 line

cycles: out 1308, in 410

^ ??

Quoted 1 line

cycles: out 1315, in 419

^ 933 MHz state

Quoted 4 lines

cycles: out 1315, in 419
cycles: out 1314, in 419
cycles: out 1315, in 420
cycles: out 1315, in 419

...this is in stark contrast to values of other users, where, skimming through the mails, higher cpu frequencies yields higher out/in values, but not so on TM5800. Highly interesting.

#58 lore raw
In reply to Jan Engelhardt
Quoted 6 lines · Jan Engelhardt
Quoted 4 lines · Rene Herman

Would some people on x86 (both 32 and 64) be kind enough to compile and run the attached program? This is about testing how long I/O port access to port 0x80 takes. It measures in CPU cycles so CPU speed is crucial in reporting.

Quoted 9 lines

Transmeta TM5800 CPU with nominal frequency 933 MHz, but it has a hardware(!) 'ondemand' governor over the range of frequencies that the user allowed scaling over, irrespective of the software governor. (That is, if the CPU can do 300,533 and 933 MHz, and setting the min/max to 300/533 will cause the hardware to 'ondemand' between 300 and 533 only. And that even if 'performance' is set on the software side - so the only way to enforce 'performance' is to actually set min=933.)

Actually it has two different ones (economy and performance), you can use the "longrun" utility to select which one.

Either way, all Transmeta processors have a fixed TSC, so there is no issue.

-hpa

#22 lore raw
In reply to Rene Herman
Quoted 14 lines · Rene Herman
Quoted 12 lines · Kyle McMartin
Quoted 1 line · Rene Herman
    asm volatile ("rdtsc": "=A" (tsc));

rdtsc returns a 64-bit value in two 32-bit regs, you need to do

inline unsigned long long rdtsc(void)

{
    unsigned int lo, hi;
    asm volatile ("rdtsc": "=a" (lo), "=d" (hi));
    return (unsigned long long)hi << 32 | lo;
}
Quoted 3 lines
Quoted 1 line

as in msr.h, otherwise you'll only be looking at the value in %rax.

On 32-bit, "=A" is edx:eax. Not sure what the point is in not letting it be that on 64-bit in fact, but yes, the thing should be compiled as 32-bit.

On 64-bit, "=A" is rdx:rax, which means that a 64-bit value ends up in rax only (a 128-bit value, which gcc does support on 128-bit platforms, would be in rdx:rax.)

gcc can't deal internally with values that span partial registers.

-hpa

#35 lore raw
In reply to Rene Herman

Rene Herman napsal(a):

Quoted 11 lines · H. Peter Anvin
Quoted 10 lines
Quoted 3 lines

model name : Intel(R) Xeon(R) CPU E5335 @ 2.00GHz
cycles: out 3217, in 1898

1.6 µs, on the high end....

Quoted 2 lines

model name : Dual Core AMD Opteron(tm) Processor 275
cycles: out 5508, in 5524

Definitely an outlier; 2.5 µs here.

Now, it's around
cycles: out 4763, in 5515

It's
cpu MHz : 2205.209

#43 lore raw
In reply to Ville Syrjälä
Quoted 14 lines · Ville Syrjälä
Quoted 6 lines · Rene Herman

Good day.

Would some people on x86 (both 32 and 64) be kind enough to compile and run the attached program? This is about testing how long I/O port access to port 0x80 takes. It measures in CPU cycles so CPU speed is crucial in reporting.

vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
stepping : 6

Quoted 5 lines

cpu MHz : 2394.000
cycles: out 1830, in 1166

cpu MHz : 1596.000
cycles: out 1925, in 1266

BTW that was my home desktop. I just noticed that my work desktop gives out significantly different results.

vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz
stepping : 6

cpu MHz : 2667.000
cycles: out 4263, in 2487

cpu MHz : 1600.000
cycles: out 4391, in 2623

There seems to be more variation in the results between runs on this system too. I suppose the difference must be up to the chipset.

My home system:
00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev 02) 00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller (rev 02)

My work system:
00:00.0 Host bridge: Intel Corporation 82975X Memory Controller Hub
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)

Signature · 3 lines
Ville Syrjälä
[email protected]
http://www.sci.fi/~syrjala/
#59 lore raw
In reply to Rene Herman

Rene Herman wrote on 12-12-07 00:31:

Quoted 3 lines

Good day.

Would some people on x86 (both 32 and 64) be kind enough to compile and run the attached program? This is about testing how long I/O port access to port 0x80 takes. It measures in CPU cycles so CPU speed is crucial in reporting.

Compiled as you wished.
And here are the results from 10 iterations...:

cycles: out 1965, in 1263
cycles: out 1968, in 1251
cycles: out 1957, in 1257
cycles: out 1992, in 1253
cycles: out 1959, in 1248
cycles: out 1965, in 1264
cycles: out 1957, in 1256
cycles: out 1959, in 1248
cycles: out 1962, in 1298
cycles: out 1962, in 1275

Linux skyscraper 2.6.23.11 #1 SMP Sun Dec 16 11:54:12 CET 2007 i686 GNU/Linux

32bits system

processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Quad CPU @ 2.40GHz
stepping : 7
cpu MHz : 2400.182
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr s
bogomips : 4802.73
clflush size : 64

processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Quad CPU @ 2.40GHz
stepping : 7
cpu MHz : 2400.182
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 4
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr s
bogomips : 10614.49
clflush size : 64

processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Quad CPU @ 2.40GHz
stepping : 7
cpu MHz : 2400.182
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 4
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr s
bogomips : 4800.17
clflush size : 64

processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Quad CPU @ 2.40GHz
stepping : 7
cpu MHz : 2400.182
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 4
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr s
bogomips : 4800.17
clflush size : 64