Skip to contentSkip to conversation

buildroot ARM, error during make / make source

Buildroot Marco 2 participants 3 messages Dec 17, 2007

lore
Share & tools
lore

Marco

author
#0 lore raw

hello list,

obviously there is a problem with the receiving files example:

wget --passive-ftp -P /mnt/svn/buildroot/dl /ed//ed-0.8.tar.bz2 /ed//ed-0.8.tar.bz2: Nicht unterst??tztes Schema.

same happened also to gdb
ciao marco

#1 lore raw
Quoted 7 lines · Marco

hello list,

obviously there is a problem with the receiving files example:

wget --passive-ftp -P /mnt/svn/buildroot/dl /ed//ed-0.8.tar.bz2 /ed//ed-0.8.tar.bz2: Nicht unterst??tztes Schema.

Quoted 6 lines

same happened also to gdb
ciao marco
_______________________________________________
buildroot mailing list
buildroot at uclibc.org
http://busybox.net/mailman/listinfo/buildroot

Try to check in your config:
BR2_KERNEL_MIRROR="http://www.kernel.org/pub/"
BR2_GNU_MIRROR="http://ftp.gnu.org"

I made a commit today introducing mirrors for KERNEL and GNU packages May be you need to adjust your config.

Regards,
Ivan
--------------------------------
Embedded Linux engineer,
Promwad Company: http://www.promwad.com/
Homepage : http://www.ivankuten.com/
--------------------------------

author
#2 lore raw

gnah, stupid error. thanx. that does it. saw your mail but, as i am lil bit new to this whole stuff, i dont recognized the relevance. cheers
marco

Quoted 35 lines · Ivan Kuten
Quoted 7 lines · Marco

hello list,

obviously there is a problem with the receiving files example:

wget --passive-ftp -P /mnt/svn/buildroot/dl /ed//ed-0.8.tar.bz2 /ed//ed-0.8.tar.bz2: Nicht unterst??tztes Schema.

Quoted 7 lines

same happened also to gdb
ciao marco
_______________________________________________
buildroot mailing list
buildroot at uclibc.org
http://busybox.net/mailman/listinfo/buildroot

Try to check in your config:
BR2_KERNEL_MIRROR="http://www.kernel.org/pub/"
BR2_GNU_MIRROR="http://ftp.gnu.org"

I made a commit today introducing mirrors for KERNEL and GNU packages May be you need to adjust your config.

Regards,
Ivan
--------------------------------
Embedded Linux engineer,
Promwad Company: http://www.promwad.com/
Homepage : http://www.ivankuten.com/
--------------------------------