Skip to contentSkip to conversation

Merged some Alan patches...

DISCUSSION Jeff Garzik 1 participant 1 message Dec 18, 2007 libata

lore
Share & tools
lore

Jeff Garzik

author Applied
#0 lore raw

I just moved the following changes from #for-testing (which auto-propagates to -mm along with other stuff) into #upstream, queueing for 2.6.25:

Applied:

Quoted 9 lines
Author: Alan <[email protected]>
Date:   Tue Oct 2 13:53:05 2007 -0700

libata: fix (hopefully) all the remaining problems with devices failing setu

Two fixes in this test patch. One of them allows old CF cards to refuse pio mode setting, and one to wait for the drive to settle after a set features changes the speed settings, which is based upon the workarounds used by drivers/ide.

Applied:

Quoted 4 lines
Author: Alan Cox <[email protected]>
Date:   Mon Oct 15 20:44:11 2007 +0100

pata_pcmcia: Add support for dumb 8bit IDE emulations

Applied:

Quoted 10 lines
Author: Alan Cox <[email protected]>
Date:   Thu Oct 25 14:21:16 2007 +0100

libata/pata_it821x: Improve handling of poorly compatible emulations

Some it821x RAID firmwares return 0 for the err return off both devices. A similar issue occurs with the slave returning 0 not 1 if you plug a gigabyte sata ramdisk into a controller that fakes two SATA ports as master/slave on an SFF channel.

Quoted 4 lines

The patch does the following

- Allow the 'failed diagnostics' case on both master and slave
- Move the HORKAGE_DIAGNOSTIC check after ->dev_config

And finally, dropped one patch as per request:

Quoted 7 lines
Author: Alan Cox <[email protected]>
Date:   Mon Oct 15 19:23:13 2007 +0100

libata-core: Don't have screaming fits over DF/ERR combinations

Some hardware seems to get this wrong in a non-harmful way, and there are some devices that seem to do it deliberately for various reasons.