Skip to contentSkip to conversation

USB serial ftdi_sio - enabling multiple ELV devices, adding EM1010PC

PATCH New Peter Stark 1 participant 1 message Dec 25, 2007 2 messages not in the archive

Subsystems (2)
USB USB serial
lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

Peter Stark

author
#2 lore raw

PATCH 1/1 USB serial ftdi_sio - enabling multiple ELV devices, adding EM1010PC

I work with a group of people on a free home automation tool called FHEM. Some of the users own more than one USB-serial device by ELV. The ftdi_sio driver has most of the ELV devices disabled by default and needs to be re-enabled every time you get a new kernel. Additionally a new device (EM 1010 PC - enegry monitor) is missing in the list. Currently our users have to follow the instructions we provide at http://www.koeniglich.de/fhem/linux.html
... However, to some users it is too complicated to compile their own kernel module.

We are aware that you can specify one additional device using the vendor/product option of the module. But lot's of users own more than one device.

Signed-off-by Peter Stark <[email protected]>

---

drivers/usb/serial/ftdi_sio.c 2007-12-25 17:41:20.000000000 +0100 renamed from drivers/usb/serial/ftdi_sio.c 2007-12-18 22:55:57.000000000 +0100 +3 -0
diff -uprN -X linux-2.6.23.12-vanilla/Documentation/dontdiff linux-2.6.23.12-vanilla/drivers/usb/serial/ftdi_sio.c linux-2.6.23.12/drivers/usb/serial/ftdi_sio.c
@@ -17,6 +17,9 @@
 * See http://ftdi-usb-sio.sourceforge.net for upto date testing info
 *     and extra documentation
 *
+ * (25/Dec/2007) Peter Stark
+ *      Made ELV devices included by default. Added EM1010PC.
+ *
 * (21/Jul/2004) Ian Abbott
 *      Incorporated Steven Turner's code to add support for the

FT2232C chip.
* The prelimilary port to the 2.6 kernel was by Rus V.
Brushkoff. I have
@@ -471,30 +474,29 @@ static struct usb_device_id id_table_com
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) }, { USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) }, /*

-        * These will probably use user-space drivers.  Uncomment them if
-        * you need them or use the user-specified vendor/product module
-        * parameters (see ftdi_sio.h for the numbers).  Make a fuss if
-        * you think the driver should recognize any of them by default.
+        * Due to many user requests for multiple ELV devices we enable
+        * them by default.
        */
-       /* { USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) }, */
-       /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) }, */
-       /* { USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) }, */
-       /* { USB_DEVICE(FTDI_VID, FTDI_ELV_UDF77_PID) }, */
-       /* { USB_DEVICE(FTDI_VID, FTDI_ELV_UIO88_PID) }, */
-       /* { USB_DEVICE(FTDI_VID, FTDI_ELV_UAD8_PID) }, */
-       /* { USB_DEVICE(FTDI_VID, FTDI_ELV_UDA7_PID) }, */
-       /* { USB_DEVICE(FTDI_VID, FTDI_ELV_USI2_PID) }, */
-       /* { USB_DEVICE(FTDI_VID, FTDI_ELV_T1100_PID) }, */
-       /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PCD200_PID) }, */
-       /* { USB_DEVICE(FTDI_VID, FTDI_ELV_ULA200_PID) }, */
-       /* { USB_DEVICE(FTDI_VID, FTDI_ELV_CSI8_PID) }, */
-       /* { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1000DL_PID) }, */
-       /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) }, */
-       /* { USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) }, */
-       /* { USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) }, */
-       /* { USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) }, */
-       /* { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) }, */
-       /* { USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) }, */
+       { USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) },
+       { USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) },
+       { USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) },
+       { USB_DEVICE(FTDI_VID, FTDI_ELV_UDF77_PID) },
+       { USB_DEVICE(FTDI_VID, FTDI_ELV_UIO88_PID) },
+       { USB_DEVICE(FTDI_VID, FTDI_ELV_UAD8_PID) },
+       { USB_DEVICE(FTDI_VID, FTDI_ELV_UDA7_PID) },
+       { USB_DEVICE(FTDI_VID, FTDI_ELV_USI2_PID) },
+       { USB_DEVICE(FTDI_VID, FTDI_ELV_T1100_PID) },
+       { USB_DEVICE(FTDI_VID, FTDI_ELV_PCD200_PID) },
+       { USB_DEVICE(FTDI_VID, FTDI_ELV_ULA200_PID) },
+       { USB_DEVICE(FTDI_VID, FTDI_ELV_CSI8_PID) },
+       { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1000DL_PID) },
+       { USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) },
+       { USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) },
+       { USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) },
+       { USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) },
+       { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) },
+       { USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) },
+       { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) },

{ USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) }, { USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) }, { USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },

drivers/usb/serial/ftdi_sio.h 2007-12-25 17:39:57.000000000 +0100 renamed from drivers/usb/serial/ftdi_sio.h 2007-12-18 22:55:57.000000000 +0100 +0 -0
diff -uprN -X linux-2.6.23.12-vanilla/Documentation/dontdiff linux-2.6.23.12-vanilla/drivers/usb/serial/ftdi_sio.h linux-2.6.23.12/drivers/usb/serial/ftdi_sio.h
@@ -245,6 +245,7 @@

#define FTDI_ELV_WS300PC_PID   0xE0F6  /* PC-Wetterstation (WS 300 PC) */
#define FTDI_ELV_FHZ1300PC_PID 0xE0E8  /* FHZ 1300 PC */
#define FTDI_ELV_WS500_PID     0xE0E9  /* PC-Wetterstation (WS 500) */

+#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */

/*
* Definitions for ID TECH (www.idt-net.com) devices
...
regards,
Peter