31-rc3-mmotm0716 - dead USB trackball mouse kills entire system
(Throwing at everybody in MAINTAINERS that might know something...)
OK. To start off - I *know* it's a trackball that is on its last legs. However, (a) it's my favorite mouse design *ever* and (b) it's out of production, so I'm trying to delay as long as possible replacing it. Especially when the entire problem is that the USB cord has one broken/loose conductor, which means that four or five times a day I have to wiggle the cord a 1/16" to wake it back up, and I get this sort of spewage in my console logs if running a -mmotm0702 or earlier kernel:
[ 305.300116] usb 1-8.3: USB disconnect, address 6 [ 305.480251] usb 1-8.3: new low speed USB device using ehci_hcd and address 7 [ 305.559595] SELinux: Context staff_u:object_r:gconf_home_t:s0 is not valid (left unmapped). [ 305.570989] usb 1-8.3: New USB device found, idVendor=045e, idProduct=0023 [ 305.570999] usb 1-8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 305.571043] usb 1-8.3: Product: Microsoft Trackball Optical® [ 305.571050] usb 1-8.3: Manufacturer: Microsoft [ 305.571367] usb 1-8.3: configuration #1 chosen from 1 choice [ 305.580597] input: Microsoft Microsoft Trackball Optical® as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8.3/1-8.3:1.0/input/input9 [ 305.580845] generic-usb 0003:045E:0023.0002: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Trackball Optical®] on usb-0000:00:1d.7-8.3/input0 [ 308.116101] usb 1-8.3: USB disconnect, address 7 [ 308.291271] usb 1-8.3: new low speed USB device using ehci_hcd and address 8 [ 308.381867] usb 1-8.3: New USB device found, idVendor=045e, idProduct=0023 [ 308.381876] usb 1-8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 308.381883] usb 1-8.3: Product: Microsoft Trackball Optical® [ 308.381889] usb 1-8.3: Manufacturer: Microsoft [ 308.382181] usb 1-8.3: configuration #1 chosen from 1 choice [ 308.389974] input: Microsoft Microsoft Trackball Optical® as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8.3/1-8.3:1.0/input/input10 [ 308.390266] generic-usb 0003:045E:0023.0003: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Trackball Optical®] on usb-0000:00:1d.7-8.3/input0
Pretty much what you'd *expect* to see if a device keeps dropping in and out...
Well... Usually. Today, on a -mmotm0716 kernel, the loose conductor struck again, and no amount of wiggling would resurrect it as far as the system was concerned. Note however that it *did* wake up just fine when I finally rebooted the machine, even though I had not touched the mouse any further - which says to me that the wires were making a connection again, but the kernel wasn't picking up on it.
Meanwhile, in my kernel logs, I had:
[ 571.965568] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 [ 571.965661] usb 1-8: clear tt 3 (0060) error -32 [ 571.981570] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 [ 571.981668] usb 1-8: clear tt 3 (0060) error -32 [ 571.997698] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 [ 571.997782] usb 1-8: clear tt 3 (0060) error -32 [ 572.013568] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 [ 572.013656] usb 1-8: clear tt 3 (0060) error -32 [ 572.029694] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 [ 572.029783] usb 1-8: clear tt 3 (0060) error -32 [ 572.045696] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 [ 572.045781] usb 1-8: clear tt 3 (0060) error -32 [ 572.061567] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 [ 572.061655] usb 1-8: clear tt 3 (0060) error -32 [ 572.077698] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 [ 572.077782] usb 1-8: clear tt 3 (0060) error -32 [ 572.088910] usb 1-8.3: USB disconnect, address 6 [ 572.267417] usb 1-8.3: new low speed USB device using ehci_hcd and address 7 [ 572.357781] usb 1-8.3: New USB device found, idVendor=045e, idProduct=0023 [ 572.357789] usb 1-8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 572.357796] usb 1-8.3: Product: Microsoft Trackball Optical® [ 572.357802] usb 1-8.3: Manufacturer: Microsoft [ 572.358075] usb 1-8.3: configuration #1 chosen from 1 choice [ 572.365574] input: Microsoft Microsoft Trackball Optical® as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8.3/1-8.3:1.0/input/input9 [ 572.365829] generic-usb 0003:045E:0023.0002: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Trackball Optical®] on usb-0000:00:1d.7-8.3/input0
The "can't reset device" is apparently new with mm-0716 - I've not seen it before in at least the 6 weeks my logs go back. And it seems to be the beginning of things going pear-shaped, even though it manages to reset the device. A few seconds, the events thread whinges that not all is fine in USB land:
[ 588.903158] usb 1-8.3: reset low speed USB device using ehci_hcd and address 7 [ 593.903075] ------------[ cut here ]------------ [ 593.903091] WARNING: at drivers/usb/host/ehci-hcd.c:906 ehci_urb_dequeue+0xa9/0x145() [ 593.903098] Hardware name: Latitude D820 [ 593.903102] Modules linked in: ext4 jbd2 crc16 nvidia(P) [last unloaded: microcode] [ 593.903127] Pid: 10, comm: events/0 Tainted: P 2.6.31-rc3-mmotm0716 #5 [ 593.903133] Call Trace: [ 593.903147] [<ffffffff8103f459>] warn_slowpath_common+0x77/0x8f [ 593.903156] [<ffffffff8103f480>] warn_slowpath_null+0xf/0x11 [ 593.903165] [<ffffffff812d66cb>] ehci_urb_dequeue+0xa9/0x145 [ 593.903176] [<ffffffff812c20f6>] unlink1+0xcd/0xe0 [ 593.903185] [<ffffffff812c2279>] usb_hcd_unlink_urb+0x60/0x84 [ 593.903194] [<ffffffff812c34d0>] usb_kill_urb+0x4f/0xc7 [ 593.903204] [<ffffffff812c4ae4>] usb_start_wait_urb+0x9e/0xde [ 593.903214] [<ffffffff812c3b1d>] ? usb_init_urb+0x22/0x33 [ 593.903224] [<ffffffff812c4dd1>] usb_control_msg+0x172/0x196 [ 593.903233] [<ffffffff812be39b>] hub_port_init+0x348/0x71e [ 593.903244] [<ffffffff812be80e>] usb_reset_and_verify_device+0x9d/0x3f0 [ 593.903253] [<ffffffff812c34a0>] ? usb_kill_urb+0x1f/0xc7 [ 593.903263] [<ffffffff81034cb0>] ? get_parent_ip+0x11/0x42 [ 593.903273] [<ffffffff81327812>] ? hid_cease_io+0x36/0x3b [ 593.903282] [<ffffffff812bebfa>] usb_reset_device+0x99/0x11c [ 593.903291] [<ffffffff8132808f>] ? hid_reset+0x0/0x128 [ 593.903299] [<ffffffff8132812a>] hid_reset+0x9b/0x128 [ 593.903309] [<ffffffff81051a48>] worker_thread+0x2ba/0x3e9 [ 593.903317] [<ffffffff810519ef>] ? worker_thread+0x261/0x3e9 [ 593.903328] [<ffffffff81056841>] ? autoremove_wake_function+0x0/0x34 [ 593.903337] [<ffffffff8105178e>] ? worker_thread+0x0/0x3e9 [ 593.903346] [<ffffffff81056433>] kthread+0x85/0x8d [ 593.903357] [<ffffffff8100c41a>] child_rip+0xa/0x20 [ 593.903367] [<ffffffff8100bd80>] ? restore_args+0x0/0x30 [ 593.903377] [<ffffffff810563ae>] ? kthread+0x0/0x8d [ 593.903385] [<ffffffff8100c410>] ? child_rip+0x0/0x20 [ 593.903391] ---[ end trace 816b51bf46b6656d ]---
And 2 minutes later, things are *still* not fine, and other things are hanging as well. Since the 'events' thread is hung, both my mouse and keyboard are dead (though alt-sysrq kept working, since it does its magic behind 'events' back).
[ 720.548076] INFO: task events/0:10 blocked for more than 120 seconds. [ 720.548083] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 720.548090] events/0 D 0000000000000000 4640 10 2 0x00000000 [ 720.548104] ffff88007f8d7ae0 0000000000000046 ffff88007f8d7a80 0000000000000046 [ 720.548119] 0000000000000000 ffffffff81056a51 0000000000000000 ffffffff8174c658 [ 720.548133] ffff88007f8d7a70 ffff88007f8d4660 000000000000df88 ffff88007f8d4660 [ 720.548147] Call Trace: [ 720.548166] [<ffffffff81056a51>] ? prepare_to_wait+0x1c/0x5c [ 720.548178] [<ffffffff814a2819>] ? _spin_unlock_irqrestore+0x72/0x80 [ 720.548190] [<ffffffff812c352a>] usb_kill_urb+0xa9/0xc7 [ 720.548199] [<ffffffff81056841>] ? autoremove_wake_function+0x0/0x34 [ 720.548209] [<ffffffff812c4ae4>] usb_start_wait_urb+0x9e/0xde [ 720.548219] [<ffffffff812c3b1d>] ? usb_init_urb+0x22/0x33 [ 720.548229] [<ffffffff812c4dd1>] usb_control_msg+0x172/0x196 [ 720.548239] [<ffffffff812be39b>] hub_port_init+0x348/0x71e [ 720.548250] [<ffffffff812be80e>] usb_reset_and_verify_device+0x9d/0x3f0 [ 720.548282] [<ffffffff812c34a0>] ? usb_kill_urb+0x1f/0xc7 [ 720.548295] [<ffffffff81034cb0>] ? get_parent_ip+0x11/0x42 [ 720.548308] [<ffffffff81327812>] ? hid_cease_io+0x36/0x3b [ 720.548317] [<ffffffff812bebfa>] usb_reset_device+0x99/0x11c [ 720.548326] [<ffffffff8132808f>] ? hid_reset+0x0/0x128 [ 720.548334] [<ffffffff8132812a>] hid_reset+0x9b/0x128 [ 720.548344] [<ffffffff81051a48>] worker_thread+0x2ba/0x3e9 [ 720.548352] [<ffffffff810519ef>] ? worker_thread+0x261/0x3e9 [ 720.548362] [<ffffffff81056841>] ? autoremove_wake_function+0x0/0x34 [ 720.548371] [<ffffffff8105178e>] ? worker_thread+0x0/0x3e9 [ 720.548380] [<ffffffff81056433>] kthread+0x85/0x8d [ 720.548391] [<ffffffff8100c41a>] child_rip+0xa/0x20 [ 720.548402] [<ffffffff8100bd80>] ? restore_args+0x0/0x30 [ 720.548411] [<ffffffff810563ae>] ? kthread+0x0/0x8d [ 720.548419] [<ffffffff8100c410>] ? child_rip+0x0/0x20 [ 720.548424] INFO: lockdep is turned off. [ 720.548455] INFO: task pcscd:2022 blocked for more than 120 seconds. [ 720.548461] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 720.548466] pcscd D 0000000000000000 5640 2022 1 0x00020080 [ 720.548480] ffff880075287ae8 0000000000000046 0000000000000000 ffff880002139e58 [ 720.548494] 0000000000000003 0000000000000002 ffff880075287fd8 ffff880075286000 [ 720.548508] ffff880075287a78 ffff880073e588e0 000000000000df88 ffff880073e588e0 [ 720.548522] Call Trace: [ 720.548533] [<ffffffff81065fd6>] ? trace_hardirqs_on_caller+0x1f/0x145 [ 720.548545] [<ffffffff814a0718>] schedule_timeout+0x22/0xc5 [ 720.548555] [<ffffffff81171412>] ? avc_has_perm_noaudit+0x51d/0x546 [ 720.548565] [<ffffffff81065fd6>] ? trace_hardirqs_on_caller+0x1f/0x145 [ 720.548574] [<ffffffff814a2889>] ? _spin_unlock_irq+0x62/0x6f [ 720.548583] [<ffffffff814a1746>] __down_common+0xa7/0xe9 [ 720.548593] [<ffffffff814a17e7>] __down+0x18/0x1a [ 720.548601] [<ffffffff8105ab38>] down+0x49/0x5d [ 720.548611] [<ffffffff812cc5a1>] usbdev_ioctl+0x4e/0x14b0 [ 720.548620] [<ffffffff81171412>] ? avc_has_perm_noaudit+0x51d/0x546 [ 720.548630] [<ffffffff81171492>] ? avc_has_perm+0x57/0x69 [ 720.548638] [<ffffffff814a2c90>] ? unlock_kernel+0x98/0xa5 [ 720.548648] [<ffffffff81172209>] ? inode_has_perm+0x85/0x92 [ 720.548659] [<ffffffff810dd4c2>] vfs_ioctl+0x6a/0x82 [ 720.548668] [<ffffffff810dda01>] do_vfs_ioctl+0x4b0/0x4f6 [ 720.548678] [<ffffffff810dda9e>] sys_ioctl+0x57/0x95 [ 720.548688] [<ffffffff8110a817>] do_ioctl32_pointer+0xb/0xd [ 720.548697] [<ffffffff8110cd13>] compat_sys_ioctl+0x437/0x4a8 [ 720.548705] [<ffffffff810d8905>] ? path_put+0x1d/0x21 [ 720.548714] [<ffffffff81065374>] ? trace_hardirqs_off_caller+0x1f/0xa2 [ 720.548724] [<ffffffff8107d83f>] ? audit_syscall_entry+0xcb/0x19c [ 720.548736] [<ffffffff8102b5f8>] sysenter_dispatch+0x7/0x2c [ 720.548745] [<ffffffff814a1f32>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 720.548751] INFO: lockdep is turned off.
Quoted 1 line
From there, things went downhill fast (I tried to ssh in, but *that* got
hung up as well), and I ended up rebooting.
Quoted 35 lines · On Thu, 23 Jul 2009 [email protected] wrote:
Well... Usually. Today, on a -mmotm0716 kernel, the loose conductor struck again, and no amount of wiggling would resurrect it as far as the system was concerned. Note however that it *did* wake up just fine when I finally rebooted the machine, even though I had not touched the mouse any further - which says to me that the wires were making a connection again, but the kernel wasn't picking up on it.
Meanwhile, in my kernel logs, I had:
[ 571.965568] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 [ 571.965661] usb 1-8: clear tt 3 (0060) error -32 [ 571.981570] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 [ 571.981668] usb 1-8: clear tt 3 (0060) error -32 [ 571.997698] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 [ 571.997782] usb 1-8: clear tt 3 (0060) error -32 [ 572.013568] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 [ 572.013656] usb 1-8: clear tt 3 (0060) error -32 [ 572.029694] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 [ 572.029783] usb 1-8: clear tt 3 (0060) error -32 [ 572.045696] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 [ 572.045781] usb 1-8: clear tt 3 (0060) error -32 [ 572.061567] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 [ 572.061655] usb 1-8: clear tt 3 (0060) error -32 [ 572.077698] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 [ 572.077782] usb 1-8: clear tt 3 (0060) error -32 [ 572.088910] usb 1-8.3: USB disconnect, address 6 [ 572.267417] usb 1-8.3: new low speed USB device using ehci_hcd and address 7 [ 572.357781] usb 1-8.3: New USB device found, idVendor=045e, idProduct=0023 [ 572.357789] usb 1-8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 572.357796] usb 1-8.3: Product: Microsoft Trackball Optical® [ 572.357802] usb 1-8.3: Manufacturer: Microsoft [ 572.358075] usb 1-8.3: configuration #1 chosen from 1 choice [ 572.365574] input: Microsoft Microsoft Trackball Optical® as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8.3/1-8.3:1.0/input/input9 [ 572.365829] generic-usb 0003:045E:0023.0002: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Trackball Optical®] on usb-0000:00:1d.7-8.3/input0
Quoted 2 lines
The "can't reset device" is apparently new with mm-0716 - I've not seen it before in at least the 6 weeks my logs go back.
I don't think it is new. You might try using an older kernel with your decaying trackball to see.
Quoted 3 lines
And it seems to be the
beginning of things going pear-shaped, even though it manages to reset the device.
No it doesn't. The device gets disconnected and reconnected.
Quoted 29 lines
A few seconds, the events thread whinges that not all is fine in USB
land:[ 588.903158] usb 1-8.3: reset low speed USB device using ehci_hcd and address 7 [ 593.903075] ------------[ cut here ]------------ [ 593.903091] WARNING: at drivers/usb/host/ehci-hcd.c:906 ehci_urb_dequeue+0xa9/0x145() [ 593.903098] Hardware name: Latitude D820 [ 593.903102] Modules linked in: ext4 jbd2 crc16 nvidia(P) [last unloaded: microcode] [ 593.903127] Pid: 10, comm: events/0 Tainted: P 2.6.31-rc3-mmotm0716 #5 [ 593.903133] Call Trace: [ 593.903147] [<ffffffff8103f459>] warn_slowpath_common+0x77/0x8f [ 593.903156] [<ffffffff8103f480>] warn_slowpath_null+0xf/0x11 [ 593.903165] [<ffffffff812d66cb>] ehci_urb_dequeue+0xa9/0x145 [ 593.903176] [<ffffffff812c20f6>] unlink1+0xcd/0xe0 [ 593.903185] [<ffffffff812c2279>] usb_hcd_unlink_urb+0x60/0x84 [ 593.903194] [<ffffffff812c34d0>] usb_kill_urb+0x4f/0xc7 [ 593.903204] [<ffffffff812c4ae4>] usb_start_wait_urb+0x9e/0xde [ 593.903214] [<ffffffff812c3b1d>] ? usb_init_urb+0x22/0x33 [ 593.903224] [<ffffffff812c4dd1>] usb_control_msg+0x172/0x196 [ 593.903233] [<ffffffff812be39b>] hub_port_init+0x348/0x71e [ 593.903244] [<ffffffff812be80e>] usb_reset_and_verify_device+0x9d/0x3f0 [ 593.903253] [<ffffffff812c34a0>] ? usb_kill_urb+0x1f/0xc7 [ 593.903263] [<ffffffff81034cb0>] ? get_parent_ip+0x11/0x42 [ 593.903273] [<ffffffff81327812>] ? hid_cease_io+0x36/0x3b [ 593.903282] [<ffffffff812bebfa>] usb_reset_device+0x99/0x11c [ 593.903291] [<ffffffff8132808f>] ? hid_reset+0x0/0x128 [ 593.903299] [<ffffffff8132812a>] hid_reset+0x9b/0x128 [ 593.903309] [<ffffffff81051a48>] worker_thread+0x2ba/0x3e9 [ 593.903317] [<ffffffff810519ef>] ? worker_thread+0x261/0x3e9
Quoted 8 lines
[ 593.903328] [<ffffffff81056841>] ? autoremove_wake_function+0x0/0x34 [ 593.903337] [<ffffffff8105178e>] ? worker_thread+0x0/0x3e9 [ 593.903346] [<ffffffff81056433>] kthread+0x85/0x8d [ 593.903357] [<ffffffff8100c41a>] child_rip+0xa/0x20 [ 593.903367] [<ffffffff8100bd80>] ? restore_args+0x0/0x30 [ 593.903377] [<ffffffff810563ae>] ? kthread+0x0/0x8d [ 593.903385] [<ffffffff8100c410>] ? child_rip+0x0/0x20 [ 593.903391] ---[ end trace 816b51bf46b6656d ]---
This is a bug. For more discussion see this thread:
http://marc.info/?t=124807676700001&r=1&w=2
You should try the patch given there.
Quoted 4 lines
And 2 minutes later, things are *still* not fine, and other things are hanging as well. Since the 'events' thread is hung, both my mouse and keyboard are dead (though alt-sysrq kept working, since it does its magic behind 'events' back).
Try the patch and see if it fixes the hang.
Alan Stern
Quoted 5 lines · Alan Stern
Quoted 2 lines
The "can't reset device" is apparently new with mm-0716 - I've not seen it before in at least the 6 weeks my logs go back.
I don't think it is new. You might try using an older kernel with your decaying trackball to see.
Umm.. I've *been* using it with older kernels for *months*. Not a *single* hit in my logs, which go back till June 10. Except for today, when I started running -0716, and now I've gotten hit by the same messages, and then the same hang 4 times today.
So either the codepath in -0716 is different from -0702 and -0604 and -0517 and every other -mm before, or the trackball spontaneously developed a *different* behavior overnight at the same time I upgraded the kernel.
See the logs below...
Quoted 5 lines
This is a bug. For more discussion see this thread:
http://marc.info/?t=124807676700001&r=1&w=2You should try the patch given there.
OK, will do that, see if it improves things...
The logs back to June 10 (and I was on vacation Jun 20-26):
% egrep -h 'USB disc|reset device' mess* | grep -e '-8.3'
Jun 10 12:05:22 turing-police kernel: [93125.340042] usb 1-8.3: USB disconnect, address 7 Jun 11 16:26:48 turing-police kernel: [195210.844332] usb 1-8.3: USB disconnect, address 8 Jun 11 16:56:12 turing-police kernel: [196975.450198] usb 1-8.3: USB disconnect, address 9 Jun 12 12:20:58 turing-police kernel: [266860.805915] usb 1-8.3: USB disconnect, address 10 Jun 12 12:20:58 turing-police kernel: [266861.317793] usb 1-8.3: USB disconnect, address 11 Jun 12 12:21:00 turing-police kernel: [266862.853911] usb 1-8.3: USB disconnect, address 13 Jun 13 00:04:40 turing-police kernel: [309083.085168] usb 1-8.3: USB disconnect, address 15 Jun 13 00:19:00 turing-police kernel: [309943.499877] usb 1-8.3: USB disconnect, address 16 Jun 13 21:00:08 turing-police kernel: [384411.506588] usb 1-8.3: USB disconnect, address 17 Jun 14 02:39:04 turing-police kernel: [404747.349968] usb 1-8.3: USB disconnect, address 18 Jun 15 11:34:12 turing-police kernel: [ 130.073577] usb 1-8.3: USB disconnect, address 7 Jun 16 11:28:07 turing-police kernel: [ 7224.839479] usb 1-8.3: USB disconnect, address 7 Jun 16 11:33:36 turing-police kernel: [ 7553.542989] usb 1-8.3: USB disconnect, address 8 Jun 16 12:44:40 turing-police kernel: [11817.473391] usb 1-8.3: USB disconnect, address 9 Jun 16 14:07:39 turing-police kernel: [16796.411826] usb 1-8.3: USB disconnect, address 10 Jun 16 14:36:44 turing-police kernel: [18541.305681] usb 1-8.3: USB disconnect, address 11 Jun 16 15:11:47 turing-police kernel: [20644.855582] usb 1-8.3: USB disconnect, address 12 Jun 16 16:23:58 turing-police kernel: [24975.602702] usb 1-8.3: USB disconnect, address 14 Jun 17 14:48:21 turing-police kernel: [12850.443754] usb 1-8.3: USB disconnect, address 6 Jun 18 15:11:55 turing-police kernel: [15216.375804] usb 1-8.3: USB disconnect, address 5 Jun 18 16:20:42 turing-police kernel: [19342.578643] usb 1-8.3: USB disconnect, address 6 Jun 18 16:25:16 turing-police kernel: [19616.498551] usb 1-8.3: USB disconnect, address 7 Jun 19 10:18:42 turing-police kernel: [ 435.712336] usb 1-8.3: USB disconnect, address 6 Jun 26 21:25:42 turing-police kernel: [ 1023.223891] usb 1-8.3: USB disconnect, address 6 Jun 26 22:12:18 turing-police kernel: [ 3818.996721] usb 1-8.3: USB disconnect, address 7 Jun 27 01:04:11 turing-police kernel: [14131.683456] usb 1-8.3: USB disconnect, address 8 Jun 27 09:25:54 turing-police kernel: [44234.915415] usb 1-8.3: USB disconnect, address 10 Jun 27 11:28:31 turing-police kernel: [51591.295831] usb 1-8.3: USB disconnect, address 11 Jun 29 15:05:58 turing-police kernel: [19491.827368] usb 1-8.3: USB disconnect, address 6 Jun 29 15:05:59 turing-police kernel: [19492.851261] usb 1-8.3: USB disconnect, address 7 Jun 29 15:42:29 turing-police kernel: [21683.439937] usb 1-8.3: USB disconnect, address 8 Jun 29 15:48:50 turing-police kernel: [22064.111496] usb 1-8.3: USB disconnect, address 9 Jun 29 16:23:31 turing-police kernel: [24145.644821] usb 1-8.3: USB disconnect, address 10 Jun 29 16:59:37 turing-police kernel: [26311.402052] usb 1-8.3: USB disconnect, address 11 Jun 29 18:18:01 turing-police kernel: [31015.595575] usb 1-8.3: USB disconnect, address 12 Jun 29 19:10:49 turing-police kernel: [34183.724930] usb 1-8.3: USB disconnect, address 15 Jun 29 21:51:55 turing-police kernel: [43848.890868] usb 1-8.3: USB disconnect, address 20 Jun 29 22:10:23 turing-police kernel: [44957.650230] usb 1-8.3: USB disconnect, address 29 Jun 30 11:55:54 turing-police kernel: [ 4831.052171] usb 1-8.3: USB disconnect, address 6 Jun 30 15:10:30 turing-police kernel: [16507.465867] usb 1-8.3: USB disconnect, address 7 Jul 2 13:11:54 turing-police kernel: [ 7093.765139] usb 1-8.3: USB disconnect, address 5 Jul 2 13:24:23 turing-police kernel: [ 7843.076442] usb 1-8.3: USB disconnect, address 6 Jul 2 14:03:02 turing-police kernel: [10161.665586] usb 1-8.3: USB disconnect, address 7 Jul 2 15:51:35 turing-police kernel: [ 5852.438552] usb 1-8.3: USB disconnect, address 5 Jul 2 18:20:12 turing-police kernel: [14769.420729] usb 1-8.3: USB disconnect, address 6 Jul 2 21:39:05 turing-police kernel: [ 1644.983724] usb 1-8.3: USB disconnect, address 6 Jul 2 22:38:32 turing-police kernel: [ 5212.596444] usb 1-8.3: USB disconnect, address 7 Jul 2 22:42:12 turing-police kernel: [ 5431.732078] usb 1-8.3: USB disconnect, address 8 Jul 2 22:43:35 turing-police kernel: [ 5514.931740] usb 1-8.3: USB disconnect, address 9 Jul 2 22:46:46 turing-police kernel: [ 5706.675404] usb 1-8.3: USB disconnect, address 10 Jul 2 22:54:17 turing-police kernel: [ 6157.235123] usb 1-8.3: USB disconnect, address 11 Jul 3 00:40:51 turing-police kernel: [12551.590521] usb 1-8.3: USB disconnect, address 12 Jul 3 04:41:35 turing-police kernel: [26995.348790] usb 1-8.3: USB disconnect, address 13 Jul 3 04:54:14 turing-police kernel: [27754.644344] usb 1-8.3: USB disconnect, address 14 Jul 3 05:37:13 turing-police kernel: [30332.816530] usb 1-8.3: USB disconnect, address 19 Jul 3 06:09:58 turing-police kernel: [ 855.410519] usb 1-8.3: USB disconnect, address 6 Jul 3 11:20:07 turing-police kernel: [19463.514881] usb 1-8.3: USB disconnect, address 7 Jul 3 11:20:31 turing-police kernel: [19488.346840] usb 1-8.3: USB disconnect, address 8 Jul 3 11:40:13 turing-police kernel: [20669.529547] usb 1-8.3: USB disconnect, address 9 Jul 3 12:17:10 turing-police kernel: [22886.486471] usb 1-8.3: USB disconnect, address 10 Jul 3 16:11:42 turing-police kernel: [36958.528807] usb 1-8.3: USB disconnect, address 11 Jul 3 16:13:48 turing-police kernel: [37085.240866] usb 1-8.3: USB disconnect, address 12 Jul 3 17:06:06 turing-police kernel: [40222.779998] usb 1-8.3: USB disconnect, address 13 Jul 3 17:12:54 turing-police kernel: [40631.099400] usb 1-8.3: USB disconnect, address 14 Jul 6 11:43:47 turing-police kernel: [ 3292.581525] usb 1-8.3: USB disconnect, address 7 Jul 6 15:55:33 turing-police kernel: [18398.609861] usb 1-8.3: USB disconnect, address 8 Jul 6 15:55:34 turing-police kernel: [18399.633879] usb 1-8.3: USB disconnect, address 9 Jul 6 16:20:52 turing-police kernel: [19917.199664] usb 1-8.3: USB disconnect, address 16 Jul 6 19:37:06 turing-police kernel: [31691.647785] usb 1-8.3: USB disconnect, address 18 Jul 7 13:15:15 turing-police kernel: [10368.686517] usb 1-8.3: USB disconnect, address 6 Jul 7 13:20:42 turing-police kernel: [10695.597919] usb 1-8.3: USB disconnect, address 7 Jul 7 13:46:18 turing-police kernel: [12232.439811] usb 1-8.3: USB disconnect, address 8 Jul 8 12:22:37 turing-police kernel: [11966.920540] usb 1-8.3: USB disconnect, address 6 Jul 8 12:23:18 turing-police kernel: [12008.648501] usb 1-8.3: USB disconnect, address 7 Jul 8 12:29:33 turing-police kernel: [12383.688085] usb 1-8.3: USB disconnect, address 8 Jul 8 13:01:59 turing-police kernel: [14329.542468] usb 1-8.3: USB disconnect, address 9 Jul 8 14:00:05 turing-police kernel: [17815.233490] usb 1-8.3: USB disconnect, address 10 Jul 8 14:06:47 turing-police kernel: [18217.152988] usb 1-8.3: USB disconnect, address 11 Jul 8 15:01:42 turing-police kernel: [21511.868495] usb 1-8.3: USB disconnect, address 14 Jul 8 15:55:06 turing-police kernel: [24715.820705] usb 1-8.3: USB disconnect, address 15 Jul 8 16:59:17 turing-police kernel: [28567.109854] usb 1-8.3: USB disconnect, address 17 Jul 8 17:27:27 turing-police kernel: [30257.626040] usb 1-8.3: USB disconnect, address 18 Jul 9 11:38:23 turing-police kernel: [ 3296.205121] usb 1-8.3: USB disconnect, address 6 Jul 9 11:38:46 turing-police kernel: [ 3319.757056] usb 1-8.3: USB disconnect, address 7 Jul 9 13:50:46 turing-police kernel: [11239.107773] usb 1-8.3: USB disconnect, address 8 Jul 9 14:48:14 turing-police kernel: [14687.194044] usb 1-8.3: USB disconnect, address 9 Jul 9 15:24:35 turing-police kernel: [16868.796504] usb 1-8.3: USB disconnect, address 11 Jul 9 15:45:28 turing-police kernel: [18120.955889] usb 1-8.3: USB disconnect, address 15 Jul 9 15:45:54 turing-police kernel: [18147.258735] usb 1-8.3: USB disconnect, address 19 Jul 9 17:18:20 turing-police kernel: [23693.746921] usb 1-8.3: USB disconnect, address 20 Jul 9 17:25:27 turing-police kernel: [24120.242364] usb 1-8.3: USB disconnect, address 21 Jul 10 15:31:33 turing-police kernel: [17313.732647] usb 1-8.3: USB disconnect, address 6 Jul 10 16:44:31 turing-police kernel: [21691.327035] usb 1-8.3: USB disconnect, address 7 Jul 10 17:06:21 turing-police kernel: [23001.533485] usb 1-8.3: USB disconnect, address 9 Jul 10 17:28:37 turing-police kernel: [24337.339792] usb 1-8.3: USB disconnect, address 12 Jul 12 02:07:34 turing-police kernel: [16675.255886] usb 1-8.3: USB disconnect, address 5 Jul 12 02:38:31 turing-police kernel: [18532.020360] usb 1-8.3: USB disconnect, address 6 Jul 12 02:41:12 turing-police kernel: [18693.044003] usb 1-8.3: USB disconnect, address 7 Jul 12 02:57:36 turing-police kernel: [19677.106322] usb 1-8.3: USB disconnect, address 8 Jul 12 06:54:00 turing-police kernel: [33860.828804] usb 1-8.3: USB disconnect, address 9 Jul 12 10:02:25 turing-police kernel: [45166.466061] usb 1-8.3: USB disconnect, address 10 Jul 12 13:04:12 turing-police kernel: [56073.128083] usb 1-8.3: USB disconnect, address 14 Jul 12 15:58:29 turing-police kernel: [66530.647876] usb 1-8.3: USB disconnect, address 15 Jul 12 15:58:41 turing-police kernel: [66541.911830] usb 1-8.3: USB disconnect, address 16 Jul 12 16:35:09 turing-police kernel: [68729.940201] usb 1-8.3: USB disconnect, address 20 Jul 12 16:41:56 turing-police kernel: [69137.491817] usb 1-8.3: USB disconnect, address 22 Jul 12 17:21:53 turing-police kernel: [71533.917784] usb 1-8.3: USB disconnect, address 26 Jul 12 17:24:57 turing-police kernel: [71718.677972] usb 1-8.3: USB disconnect, address 32 Jul 13 10:32:00 turing-police kernel: [ 305.107104] usb 1-8.3: USB disconnect, address 6 Jul 13 10:46:02 turing-police kernel: [ 1147.620721] usb 1-8.3: USB disconnect, address 7 Jul 13 12:54:05 turing-police kernel: [ 8830.665678] usb 1-8.3: USB disconnect, address 8 Jul 13 14:17:52 turing-police kernel: [13857.780833] usb 1-8.3: USB disconnect, address 9 Jul 16 11:28:50 turing-police kernel: [ 1481.182088] usb 1-8.3: USB disconnect, address 6 Jul 16 11:36:03 turing-police kernel: [ 1914.203339] usb 1-8.3: USB disconnect, address 8 Jul 16 13:31:34 turing-police kernel: [ 8844.879249] usb 1-8.3: USB disconnect, address 9 Jul 16 13:31:55 turing-police kernel: [ 8866.128241] usb 1-8.3: USB disconnect, address 10 Jul 16 14:17:42 turing-police kernel: [11613.526380] usb 1-8.3: USB disconnect, address 12 Jul 16 14:21:22 turing-police kernel: [11833.175214] usb 1-8.3: USB disconnect, address 13 Jul 16 14:23:42 turing-police kernel: [11972.951501] usb 1-8.3: USB disconnect, address 14 Jul 16 17:40:37 turing-police kernel: [23788.560389] usb 1-8.3: USB disconnect, address 15 Jul 16 18:18:04 turing-police kernel: [26035.469728] usb 1-8.3: USB disconnect, address 16 Jul 16 18:18:56 turing-police kernel: [26087.437651] usb 1-8.3: USB disconnect, address 17 Jul 16 19:12:39 turing-police kernel: [29310.821758] usb 1-8.3: USB disconnect, address 18 Jul 18 22:20:41 turing-police kernel: [ 7676.887799] usb 1-8.3: USB disconnect, address 6 Jul 18 22:22:14 turing-police kernel: [ 7770.071194] usb 1-8.3: USB disconnect, address 10 Jul 18 22:37:00 turing-police kernel: [ 8656.341954] usb 1-8.3: USB disconnect, address 14 Jul 18 22:44:24 turing-police kernel: [ 9100.625554] usb 1-8.3: USB disconnect, address 16 Jul 18 23:22:26 turing-police kernel: [11382.480949] usb 1-8.3: USB disconnect, address 17 Jul 19 00:03:31 turing-police kernel: [13846.907699] usb 1-8.3: USB disconnect, address 18 Jul 19 00:41:49 turing-police kernel: [16145.094099] usb 1-8.3: USB disconnect, address 20 Jul 19 00:42:03 turing-police kernel: [16159.430078] usb 1-8.3: USB disconnect, address 22 Jul 19 02:13:44 turing-police kernel: [21660.092639] usb 1-8.3: USB disconnect, address 23 Jul 19 04:26:04 turing-police kernel: [29600.175535] usb 1-8.3: USB disconnect, address 25 Jul 19 04:44:13 turing-police kernel: [30689.388720] usb 1-8.3: USB disconnect, address 26 Jul 19 05:54:54 turing-police kernel: [34930.068836] usb 1-8.3: USB disconnect, address 27 Jul 19 06:04:20 turing-police kernel: [35496.470907] usb 1-8.3: USB disconnect, address 30 Jul 19 06:24:10 turing-police kernel: [36686.240777] usb 1-8.3: USB disconnect, address 32 Jul 19 06:43:30 turing-police kernel: [37846.332557] usb 1-8.3: USB disconnect, address 34 Jul 19 08:10:54 turing-police kernel: [43090.536690] usb 1-8.3: USB disconnect, address 35 Jul 19 10:12:07 turing-police kernel: [50362.758575] usb 1-8.3: USB disconnect, address 37 Jul 19 10:26:29 turing-police kernel: [51224.705710] usb 1-8.3: USB disconnect, address 42 Jul 19 10:45:52 turing-police kernel: [52387.922763] usb 1-8.3: USB disconnect, address 47 Jul 19 12:29:31 turing-police kernel: [58606.687039] usb 1-8.3: USB disconnect, address 51 Jul 19 15:41:37 turing-police kernel: [ 9546.144532] usb 1-8.3: USB disconnect, address 6 Jul 20 10:27:45 turing-police kernel: [ 337.102606] usb 1-8.3: USB disconnect, address 6 Jul 20 16:00:29 turing-police kernel: [17718.907516] usb 1-8.3: USB disconnect, address 7 Jul 20 18:38:17 turing-police kernel: [27187.565715] usb 1-8.3: USB disconnect, address 8 Jul 20 23:50:39 turing-police kernel: [ 9143.247247] usb 1-8.3: USB disconnect, address 6 Jul 21 00:13:46 turing-police kernel: [ 177.370154] usb 1-8.3: USB disconnect, address 6 Jul 21 00:13:46 turing-police kernel: [ 177.882155] usb 1-8.3: USB disconnect, address 7 Jul 21 00:35:47 turing-police kernel: [ 1498.840131] usb 1-8.3: USB disconnect, address 8 Jul 21 11:29:25 turing-police kernel: [ 4938.192870] usb 1-8.3: USB disconnect, address 6 Jul 21 11:29:40 turing-police kernel: [ 4953.552882] usb 1-8.3: USB disconnect, address 7 Jul 21 14:40:27 turing-police kernel: [16401.091948] usb 1-8.3: USB disconnect, address 8 Jul 21 14:40:50 turing-police kernel: [16423.875944] usb 1-8.3: USB disconnect, address 15 Jul 21 15:23:05 turing-police kernel: [18958.272869] usb 1-8.3: USB disconnect, address 17 Jul 21 16:58:44 turing-police kernel: [24697.784315] usb 1-8.3: USB disconnect, address 22 Jul 21 16:59:13 turing-police kernel: [24726.456264] usb 1-8.3: USB disconnect, address 25 Jul 21 16:59:34 turing-police kernel: [24747.704236] usb 1-8.3: USB disconnect, address 30 Jul 22 14:20:55 turing-police kernel: [ 305.300116] usb 1-8.3: USB disconnect, address 6 Jul 22 14:20:58 turing-police kernel: [ 308.116101] usb 1-8.3: USB disconnect, address 7 Jul 22 15:05:21 turing-police kernel: [ 2971.280561] usb 1-8.3: USB disconnect, address 8 Jul 22 15:11:26 turing-police kernel: [ 3336.335856] usb 1-8.3: USB disconnect, address 9 Jul 22 15:40:31 turing-police kernel: [ 5081.229340] usb 1-8.3: USB disconnect, address 10 Jul 22 16:12:04 turing-police kernel: [ 6973.834721] usb 1-8.3: USB disconnect, address 13 Jul 22 16:12:08 turing-police kernel: [ 6978.186714] usb 1-8.3: USB disconnect, address 16 Jul 23 11:10:29 turing-police kernel: [ 571.965568] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 Jul 23 11:10:29 turing-police kernel: [ 571.981570] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 Jul 23 11:10:29 turing-police kernel: [ 571.997698] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 Jul 23 11:10:29 turing-police kernel: [ 572.013568] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 Jul 23 11:10:29 turing-police kernel: [ 572.029694] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 Jul 23 11:10:29 turing-police kernel: [ 572.045696] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 Jul 23 11:10:29 turing-police kernel: [ 572.061567] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 Jul 23 11:10:29 turing-police kernel: [ 572.077698] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 Jul 23 11:10:29 turing-police kernel: [ 572.088910] usb 1-8.3: USB disconnect, address 6 Jul 23 13:37:45 turing-police kernel: [ 8344.568219] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 Jul 23 13:37:45 turing-police kernel: [ 8344.584389] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 Jul 23 13:37:45 turing-police kernel: [ 8344.600383] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 Jul 23 13:37:45 turing-police kernel: [ 8344.616382] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 Jul 23 13:37:45 turing-police kernel: [ 8344.632382] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 Jul 23 13:37:45 turing-police kernel: [ 8344.648374] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 Jul 23 13:37:45 turing-police kernel: [ 8344.664386] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 Jul 23 13:37:45 turing-police kernel: [ 8344.680360] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 Jul 23 13:37:45 turing-police kernel: [ 8344.683602] usb 1-8.3: USB disconnect, address 6 Jul 23 15:44:33 turing-police kernel: [ 1488.250528] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71 Jul 23 15:44:33 turing-police kernel: [ 1488.261742] usb 1-8.3: USB disconnect, address 6
Quoted 5 lines · On Thu, 23 Jul 2009 [email protected] wrote:
Quoted 3 lines · Alan Stern
Quoted 2 lines
The "can't reset device" is apparently new with mm-0716 - I've not seen it before in at least the 6 weeks my logs go back.
Quoted 7 lines
Quoted 2 lines
I don't think it is new. You might try using an older kernel with your decaying trackball to see.
Umm.. I've *been* using it with older kernels for *months*. Not a *single* hit in my logs, which go back till June 10. Except for today, when I started running -0716, and now I've gotten hit by the same messages, and then the same hang 4 times today.
I repeat: The code that logs those messages is not new.
Quoted 5 lines
So either the codepath in -0716 is different from -0702 and -0604 and -0517 and every other -mm before, or the trackball spontaneously developed a *different* behavior overnight at the same time I upgraded the kernel.
See the logs below...
You're talking about messages like this:
Quoted 1 line
Jul 23 11:10:29 turing-police kernel: [ 571.965568] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71
Those messages are produced by the following statement in drivers/hid/usbhid/hid-core.c:hid_reset():
err_hid("can't reset device, %s-%s/input%d, status %d",
hid_to_usb_dev(hid)->bus->bus_name,
hid_to_usb_dev(hid)->devpath,
usbhid->ifnum, rc);I don't know how long that subroutine and in particular that line have been present, but it has been quite a while. Certainly since 2.6.20.
Quoted 7 lines
Quoted 5 lines
This is a bug. For more discussion see this thread:
http://marc.info/?t=124807676700001&r=1&w=2You should try the patch given there.
OK, will do that, see if it improves things...
Let me know what happens.
Alan Stern
Quoted 7 lines · Alan Stern
You're talking about messages like this:
Quoted 1 line
Jul 23 11:10:29 turing-police kernel: [ 571.965568] drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-8.3/input0, status -71Those messages are produced by the following statement in drivers/hid/usbhid/hid-core.c:hid_reset():
Quoted 7 lines
err_hid("can't reset device, %s-%s/input%d, status %d", hid_to_usb_dev(hid)->bus->bus_name, hid_to_usb_dev(hid)->devpath, usbhid->ifnum, rc);I don't know how long that subroutine and in particular that line have been present, but it has been quite a while. Certainly since 2.6.20.
That code may have been there for a long time, but apparently something *else* in the USB/HID pile of code changed, that we're now calling hid_reset() where we didn't used to before, or hid_reset() never reached that err_hid() call before, or something.
Quoted 9 lines
Quoted 7 lines
Quoted 5 lines
This is a bug. For more discussion see this thread:
http://marc.info/?t=124807676700001&r=1&w=2You should try the patch given there.
OK, will do that, see if it improves things...
Let me know what happens.
Confirming - the patch in that thread prevents the system lockup I was seeing.
So it looks like hid_reset() getting more chatty sometime in the last 2 weeks was a red herring, and one I can't actually complain about - it was quite legitimately whinging about not being able to reset a device that was in fact dead in the water at the time. Given that, and a working patch for ehci-hcd.c, I'm having a hard time finding the enthusiasm to track down what exactly changed in hid-core.c. :)
The change in hid-core.c behavior just had the bad luck to land in -mmotm at the exact same time the bug in ehci-hcd.c landed. So we had two user-visible behavior changes in the same area of code at the same time. Hilarity ensues. :)
Thanks for pointing me at the actual fix. ;)
Quoted 10 lines · On Mon, 27 Jul 2009 [email protected] wrote:
Confirming - the patch in that thread prevents the system lockup I was seeing.
So it looks like
hid_reset()getting more chatty sometime in the last 2 weeks was a red herring, and one I can't actually complain about - it was quite legitimately whinging about not being able to reset a device that was in fact dead in the water at the time. Given that, and a working patch forehci-hcd.c, I'm having a hard time finding the enthusiasm to track down what exactly changed inhid-core.c. :)
Quoted 5 lines
The change in
hid-core.cbehavior just had the bad luck to land in -mmotm at the exact same time the bug inehci-hcd.clanded. So we had two user-visible behavior changes in the same area of code at the same time. Hilarity ensues. :)Thanks for pointing me at the actual fix. ;)
A question for you: Do you now observe any warnings in the dmesg log if you rmmod ehci-hcd after the trackball mouse is gone? Apparently the patch you tested isn't perfect and some stuff gets leaked. I'm trying to track down the problem.
Alan Stern
Quoted 4 lines · Alan Stern
A question for you: Do you now observe any warnings in the dmesg log if you rmmod ehci-hcd after the trackball mouse is gone? Apparently the patch you tested isn't perfect and some stuff gets leaked. I'm trying to track down the problem.
Hmm.. Let me go cook up a test kernel - I have ehci-hcd built-in rather than a module. Might take a day or two...