2.6.24-rc8: iwl3945 gets stuck
Hi folks,
If I put some heavy load on the iwl3945, then the network connection gets stuck after a some time. To fix it I have to reload the module.
AFAICS this problem was a topic on lkml almost 3 months ago. Any news about this? I would be glad to help to track this down, but I have no idea how to change the scaling algorithm to iwl-3945-rs .
Regards
Harri
Quoted 2 lines · Harald Dunkel
If I put some heavy load on the iwl3945, then the network connection gets stuck after a some time. To fix it I have to reload the module.
Can you quantify this a bit more? What constitutes a "heavey load"? What (if any) encryption are you using? Are you using any options for iwl3945 in /etc/modprobe.conf?
Could you include the output of dmesg and/or the contents of /var/log/messages (trimmed for the most recent boot)?
Quoted 3 lines
AFAICS this problem was a topic on lkml almost 3 months ago. Any news about this? I would be glad to help to track this down, but I have no idea how to change the scaling algorithm to iwl-3945-rs .
This should happen automatically now.
John
Signature · 2 lines
John W. Linville [email protected]
Quoted 11 lines · On Tuesday 22 January 2008 17:15:42 John W. Linville wrote:
Quoted 2 lines · Harald Dunkel
If I put some heavy load on the iwl3945, then the network connection gets stuck after a some time. To fix it I have to reload the module.
Can you quantify this a bit more? What constitutes a "heavey load"? What (if any) encryption are you using? Are you using any options for iwl3945 in
/etc/modprobe.conf?Could you include the output of dmesg and/or the contents of
/var/log/messages(trimmed for the most recent boot)?
Quoted 7 lines
Quoted 3 lines
AFAICS this problem was a topic on lkml almost 3 months ago. Any news about this? I would be glad to help to track this down, but I have no idea how to change the scaling algorithm to iwl-3945-rs .
This should happen automatically now.
John
I've been getting a warning in the dmesg of my laptop with every boot since I started using 2.6.24-rc7 that might be related.
This doesn't appear to cause any problems, but from looking at the source of the warning it appears that the ipw3945 hardware might be causing the problem.
[ 31.460143] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 31.549722] WARNING: at net/mac80211/rx.c:1486 __ieee80211_rx() [ 31.549817] Pid: 4436, comm: amixer Not tainted 2.6.24-rc7-git2 #1 [ 31.549903] [ 31.549904] Call Trace: [ 31.550063] <IRQ> [<ffffffff8823c309>] :mac80211:__ieee80211_rx+0xc99/0xd60 [ 31.550236] [<ffffffff80473a36>] _spin_unlock_irqrestore+0x16/0x40 [ 31.550332] [<ffffffff8828930a>] :iwl3945:iwl_rx_queue_restock+0xca/0x170 [ 31.550422] [<ffffffff80473a36>] _spin_unlock_irqrestore+0x16/0x40 [ 31.550520] [<ffffffff8822d228>] :mac80211:ieee80211_tasklet_handler+0xb8/0x120 [ 31.550646] [<ffffffff80246741>] tasklet_action+0x51/0xc0 [ 31.550732] [<ffffffff80473974>] _spin_unlock+0x14/0x40 [ 31.550820] [<ffffffff80246644>] __do_softirq+0x64/0xe0 [ 31.550909] [<ffffffff8020d57c>] call_softirq+0x1c/0x30 [ 31.550995] [<ffffffff8020ef0d>] do_softirq+0x3d/0x90 [ 31.551083] [<ffffffff80246558>] irq_exit+0x88/0xa0 [ 31.551169] [<ffffffff8020f025>] do_IRQ+0xc5/0x1b0 [ 31.551257] [<ffffffff8020c8d1>] ret_from_intr+0x0/0xa [ 31.551369] <EOI> [<ffffffff802874be>] get_page_from_freelist+0x30e/0x670 [ 31.551519] [<ffffffff802878ce>] __alloc_pages+0x6e/0x3b0 [ 31.551608] [<ffffffff80283417>] generic_file_aio_read+0xd7/0x180 [ 31.551699] [<ffffffff802a256c>] alloc_page_vma+0x9c/0xf0 [ 31.551788] [<ffffffff8029281e>] handle_mm_fault+0x50e/0x780 [ 31.551874] [<ffffffff80473974>] _spin_unlock+0x14/0x40 [ 31.551962] [<ffffffff80473a36>] _spin_unlock_irqrestore+0x16/0x40 [ 31.552052] [<ffffffff80475a68>] do_page_fault+0x228/0x970 [ 31.552146] [<ffffffff80473974>] _spin_unlock+0x14/0x40 [ 31.552251] [<ffffffff802b2b5e>] vfs_read+0x13e/0x180 [ 31.552340] [<ffffffff80473cc9>] error_exit+0x0/0x51 [ 31.552436]
The location of the warning is:
hdrlen = ieee80211_get_hdrlen(rx.fc);
line in question --> WARN_ON_ONCE(((unsigned long)(skb->data + hdrlen)) & 3);
if (type == IEEE80211_FTYPE_DATA || type == IEEE80211_FTYPE_MGMT)
local->dot11ReceivedFragmentCount++;
sta = rx.sta = sta_info_get(local, hdr->addr2);Now, the problem is that this might be nothing, and it might be the cause of the problem. (I don't think it is the cause, myself, because I've subjected my laptop to a lot of activity - to the point that the card was starting to drop packets - and have seen no problems)
DRH
--
Dialup is like pissing through a pipette. Slow and excruciatingly painful.