POWERPC: Convert StorCenter DTS file to /dts-v1/ format.

---
arch/powerpc/boot/dts/storcenter.dts | 73 +++++++++++++++++----------------

1 files changed, 38 insertions(+), 35 deletions(-)

index 6aa1d69..2204874 100644
@@ -11,6 +11,8 @@
 * warranty of any kind, whether express or implied.
 */
 
+/dts-v1/;
+

/ {
	model = "StorCenter";
	compatible = "storcenter";
@@ -30,19 +32,19 @@
		PowerPC,8241@0 {
			device_type = "cpu";
			reg = <0>;
-			clock-frequency = <d# 200000000>;	/* Hz */
-			timebase-frequency = <d# 25000000>;	/* Hz */
+			clock-frequency = <200000000>;
+			timebase-frequency = <25000000>;
			bus-frequency = <0>;	/* from bootwrapper */

- i-cache-line-size = <d# 32>; /* bytes */
- d-cache-line-size = <d# 32>; /* bytes */
- i-cache-size = <4000>;
- d-cache-size = <4000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <16384>;

+			d-cache-size = <16384>;
		};
	};

	memory {
		device_type = "memory";
-		reg = <00000000 04000000>;	/* 64MB @ 0x0 */
+		reg = <0x00000000 0x04000000>;	/* 64MB @ 0x0 */
	};

	soc@fc000000 {
@@ -51,15 +53,15 @@
		device_type = "soc";
		compatible = "fsl,mpc8241", "mpc10x";
		store-gathering = <0>; /* 0 == off, !0 == on */

- ranges = <0 fc000000 100000>;
- reg = <fc000000 100000>; /* EUMB */
+ ranges = <0x0 0xfc000000 0x100000>;
+ reg = <0xfc000000 0x100000>; /* EUMB */

		bus-frequency = <0>;		/* fixed by loader */

		i2c@3000 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "fsl-i2c";
-			reg = <3000 100>;
+			reg = <0x3000 0x100>;
			interrupts = <5 2>;
			interrupt-parent = <&mpic>;

@@ -73,9 +75,9 @@

			cell-index = <0>;
			device_type = "serial";
			compatible = "ns16550";

- reg = <4500 20>;
- clock-frequency = <d# 97553800>; /* Hz */
- current-speed = <d# 115200>;
+ reg = <0x4500 0x20>;
+ clock-frequency = <97553800>; /* Hz */

+			current-speed = <115200>;
			interrupts = <9 2>;
			interrupt-parent = <&mpic>;
		};
@@ -84,10 +86,10 @@
			cell-index = <1>;
			device_type = "serial";
			compatible = "ns16550";

- reg = <4600 20>;
- clock-frequency = <d# 97553800>; /* Hz */
- current-speed = <d# 9600>;
- interrupts = <a 2>;
+ reg = <0x4600 0x20>;
+ clock-frequency = <97553800>; /* Hz */
+ current-speed = <9600>;

+			interrupts = <10 2>;
			interrupt-parent = <&mpic>;
		};

@@ -96,7 +98,7 @@

			device_type = "open-pic";
			compatible = "chrp,open-pic";
			interrupt-controller;
-			reg = <40000 40000>;
+			reg = <0x40000 0x40000>;
		};

	};
@@ -107,28 +109,29 @@
		#interrupt-cells = <1>;
		device_type = "pci";
		compatible = "mpc10x-pci";

- reg = <fe800000 1000>;
- ranges = <01000000 0 0 fe000000 0 00c00000
- 02000000 0 80000000 80000000 0 70000000>;
- bus-range = <0 ff>;
- clock-frequency = <d# 97553800>; /* Hz */
+ reg = <0xfe800000 0x1000>;
+ ranges = <0x01000000 0x0 0x0 0xfe000000 0x0 0x00c00000
+ 0x02000000 0x0 0x80000000 0x80000000 0x0 0x70000000>;
+ bus-range = <0 0xff>;

+		clock-frequency = <97553800>;
		interrupt-parent = <&mpic>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map-mask = <0xf800 0 0 7>;
		interrupt-map = <
			/* IDSEL 13 - IDE */

- 6800 0 0 1 &mpic 0 1
- 6800 0 0 2 &mpic 0 1
- 6800 0 0 3 &mpic 0 1
+ 0x6800 0 0 1 &mpic 0 1
+ 0x6800 0 0 2 &mpic 0 1
+ 0x6800 0 0 3 &mpic 0 1
+ 0x6800 0 0 4 &mpic 0 1

			/* IDSEL 14 - USB */

- 7000 0 0 1 &mpic 0 1
- 7000 0 0 2 &mpic 0 1
- 7000 0 0 3 &mpic 0 1
- 7000 0 0 4 &mpic 0 1
+ 0x7000 0 0 1 &mpic 0 1
+ 0x7000 0 0 2 &mpic 0 1
+ 0x7000 0 0 3 &mpic 0 1
+ 0x7000 0 0 4 &mpic 0 1

			/* IDSEL 15 - ETH */

- 7800 0 0 1 &mpic 0 1
- 7800 0 0 2 &mpic 0 1
- 7800 0 0 3 &mpic 0 1
- 7800 0 0 4 &mpic 0 1
+ 0x7800 0 0 1 &mpic 0 1
+ 0x7800 0 0 2 &mpic 0 1
+ 0x7800 0 0 3 &mpic 0 1
+ 0x7800 0 0 4 &mpic 0 1

		>;
	};

1.5.2.1.126.g6abd0

applied.

- k