Skip to contentSkip to conversation

Sending IOCTLs from 32-bit userland to 64-bit Kernel module

DISCUSSION Yoav Artzi 2 participants 2 messages Jan 29, 2008

lore
Share & tools
lore

Yoav Artzi

author
#0 lore raw

Thanks. I am aware of these issues and we already have a pretty capable layer to deal with these issues (unfortunately, it was very necessary). My problem is not with the data carried by the IOCTL, but with IOCTL command code itself, which comes out wrong on the kernel side. And my problem is not only in the size data, but also in other fields.

IOCTL command code:

1 byte: W/R/RW -------- Passes through fine

1 byte: size of data carried -------- DOESN'T PASS THROUGH

1 byte: identifier character of the module -------- Passes through fine

1 byte: IOCTL number -------- DOESN'T PASS THROUGH

The funny thing is that I always get the same IOCTL command code on the kernel side, no matter what I send using the ioctl() system call.

Any idea?

Thanks

-------- Original Message --------

Subject: Re: Sending IOCTLs from 32-bit userland to 64-bit Kernel module
From: Michael Tokarev <[email protected]>
To: Yoav Artzi <[email protected]>
Date: Tuesday, January 29, 2008 3:05:01 PM

Quoted 38 lines
Quoted 12 lines · Yoav Artzi

Hi,

I have a 32-bit user land application which sends an IOCTL to a 64-bit Kernel module. I have a few different cmd codes that I can send through the IOCTL. For some reason I seem to always get the same IOCTL cmd from user land, no matter what the ioctl() call is given. This cmd code that I get has some bytes (W/R and the module code) that are OK, but the rest is just garbage or zeros. This was originally a 32-bit system, and we are no converting the Kernel module to 64-bit, so maybe there's something special for 32-64 communication that miss.

Please see numerous examples in kernel source, in many files named compat_ioctl.c. If your ioctls uses structures with fields that have different sizes in 32- and 64-bit worlds (most notable int, various enums etc), there should be corresponding translation layer as in those examples. If it's your kernel code, that is. (And try to avoid such types there, use u32 or u64 and the like that explicitly specify size).

Another possible problem is different alignment of fields in 64- vs 32-bits worlds.

Quoted 2 lines

I am working on Linux Kernel v2.6.18.

If the kernel side isn't your code, the chances are quite high that this problem has long been fixed in more recent kernels.

/mjt

Scanned by Check Point Total Security Gateway.

#1 lore raw
Quoted 10 lines · Yoav Artzi

Thanks. I am aware of these issues and we already have a pretty capable layer to deal with these issues (unfortunately, it was very necessary). My problem is not with the data carried by the IOCTL, but with IOCTL command code itself, which comes out wrong on the kernel side. And my problem is not only in the size data, but also in other fields.

IOCTL command code:

1 byte: W/R/RW -------- Passes through fine

1 byte: size of data carried -------- DOESN'T PASS THROUGH

1 byte: identifier character of the module -------- Passes through fine

Quoted 7 lines

1 byte: IOCTL number -------- DOESN'T PASS THROUGH

The funny thing is that I always get the same IOCTL command code on the kernel side, no matter what I send using the ioctl() system call.

Any idea?

Please show us your code with ioctls implemented both in kernel and userspace. And the definitions and fops aswell. Without it it's very hard to say what's going wrong.