Skip to contentSkip to conversation

x86: oprofile 32bit stack traces on 64bit kernel

RFC PATCH In review Jason Wessel 2 participants 2 messages Feb 5, 2008 – Feb 7, 2008 x86

lore
Share & tools
lore
#0 lore raw

RFC PATCH 1/1 x86: oprofile 32bit stack traces on 64bit kernel

There are multiple ways to write the same code, hence the reason this is listed as an RFC patch. I wanted to provide a working fix to account for the case of executing 32 bit and 64 bit user space code on a 64 bit kernel.

-----CLIP HERE-------

Allow oprofile's backtrace to work on a 32bit user space thread when running on a 64bit kernel.

---
 arch/x86/oprofile/backtrace.c |   40 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 39 insertions(+), 1 deletion(-)
arch/x86/oprofile/backtrace.c +39 -1
@@ -52,6 +52,39 @@ struct frame_head {
 	unsigned long ret;
 } __attribute__((packed));
 
+
+#if defined(CONFIG_X86_64) && defined(CONFIG_IA32_EMULATION)
+struct frame_head32 {
+	unsigned int ebp;
+	unsigned int ret;
+} __attribute__((packed));
+
+static struct frame_head *
+dump_user_backtrace32(struct frame_head * head)
+{
+	struct frame_head32 bufhead[2];
+
+	/* Also check accessibility of one struct frame_head beyond */
+	if (!access_ok(VERIFY_READ, head, sizeof(bufhead)))
+		return NULL;
+	if (__copy_from_user_inatomic(bufhead, head, sizeof(bufhead)))
+		return NULL;
+	/* In a 32bit user space on a 64bit kernel the frame pointer and
+	 * PC are not at the same place as in the 64 registers.  This
+	 * requires some casting and checks of the 32bit register values
+	 * back to 64 pit pointers.
+	 */
+	oprofile_add_trace(bufhead[0].ret);
+
+	/* frame pointers should strictly progress back up the stack
+	 * (towards higher addresses) */
+	if (head >= (struct frame_head *)((unsigned long)bufhead[0].ebp))
+		return NULL;
+
+	return (struct frame_head *)((unsigned long)bufhead[0].ebp);
+}
+#endif
+
 static struct frame_head *
 dump_user_backtrace(struct frame_head * head)
 {
@@ -85,7 +118,12 @@ x86_backtrace(struct pt_regs * const reg
 				   &backtrace_ops, &depth);
 		return;
 	}
-
+#if defined(CONFIG_X86_64) && defined(CONFIG_IA32_EMULATION)
+	if (test_thread_flag(TIF_32BIT))
+		while (depth-- && head)
+			head = dump_user_backtrace32(head);
+	else
+#endif
 	while (depth-- && head)
 		head = dump_user_backtrace(head);
 }
Acked-by on v1 1/1
#1 lore raw
Quoted 6 lines · On Tue, 05 Feb 2008 10:20:52 -0600 Jason Wessel <[email protected]>…

There are multiple ways to write the same code, hence the reason this is listed as an RFC patch. I wanted to provide a working fix to account for the case of executing 32 bit and 64 bit user space code on a 64 bit kernel.

Quoted 6 lines

-----CLIP HERE-------

Allow oprofile's backtrace to work on a 32bit user space thread when running on a 64bit kernel.

looks sane; it'll be better than what is there now at least and it's safe enough