Skip to contentSkip to conversation

Support for TT connect S-2400

PATCH In review André Weidemann 1 participant 2 messages Feb 6, 2008 – Feb 9, 2008 Media (V4L/DVB)

lore
Share & tools
lore

André Weidemann

author
#0 lore raw

PATCH 1/1 Support for TT connect S-2400

Hi,
I have added few lines to dvb-usb-ids.h and ttusb2.c to get the Technotrend TT connect S-2400 working. The attached patch should apply against current HG repository.

However, the S-2400 will not be working unless an earlier patch is reverted:
http://linuxtv.org/hg/v4l-dvb/diff/816f256c2973/linux/drivers/media/dvb/frontends/tda10086.c

There is an ongoing thread in the list about the tuning problem.
See: "TDA10086 with Pinnacle 400e tuning broken"

Please try the attached patch and let me know whether it's working or not.

André

linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +2 -0
diff -Nrubw multiproto/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h multiproto_patched-for-TT-Connect-S2400/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -40,6 +40,7 @@
 #define USB_VID_MSI				0x0db0
 #define USB_VID_OPERA1				0x695c
 #define USB_VID_PINNACLE			0x2304
+#define USB_VID_TECHNOTREND			0x0b48
 #define USB_VID_TERRATEC			0x0ccd
 #define USB_VID_VISIONPLUS			0x13d3
 #define USB_VID_TWINHAN				0x1822

@@ -134,6 +135,7 @@
 #define USB_PID_AVERMEDIA_EXPRESS			0xb568
 #define USB_PID_AVERMEDIA_VOLAR				0xa807
 #define USB_PID_AVERMEDIA_VOLAR_2			0xb808
+#define USB_PID_TECHNOTREND_CONNECT_S2400               0x3006
 #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY	0x005a
 #define USB_PID_PINNACLE_PCTV2000E			0x022c
 #define USB_PID_PINNACLE_PCTV_DVB_T_FLASH		0x0228
linux/drivers/media/dvb/dvb-usb/ttusb2.c +6 -1
diff -Nrubw multiproto/linux/drivers/media/dvb/dvb-usb/ttusb2.c multiproto_patched-for-TT-Connect-S2400/linux/drivers/media/dvb/dvb-usb/ttusb2.c
@@ -191,6 +191,7 @@
 static struct usb_device_id ttusb2_table [] = {
 		{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_400E) },
 		{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_450E) },
+		{ USB_DEVICE(USB_VID_TECHNOTREND, USB_PID_TECHNOTREND_CONNECT_S2400) },
 		{}		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE (usb, ttusb2_table);

@@ -234,7 +235,7 @@
 
 	.generic_bulk_ctrl_endpoint = 0x01,
 
-	.num_device_descs = 2,
+	.num_device_descs = 3,
 	.devices = {
 		{   "Pinnacle 400e DVB-S USB2.0",
 			{ &ttusb2_table[0], NULL },

@@ -244,6 +245,10 @@
 			{ &ttusb2_table[1], NULL },
 			{ NULL },
 		},
+		{   "Technotrend TT-connect� S-2400",
+			{ &ttusb2_table[2], NULL },
+			{ NULL },
+		},
 	}
 };

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

author
#1 lore raw
Quoted 1 line · André Weidemann

Please try the attached patch and let me know whether it's working or not.

I got a few personal replies to this patch and it seems as if it is basically working.
But in order to make the USB box work without picture distortion a different firmware needs to be loaded for the TT connect S-2400. I was able to extract the firmware from the original TT driver and using this firmware everything is fine.
The problem I'm facing now is, that my programming knowledge is not sufficient to add the necessary changes to the code so that a different firmware is loaded for the two different boxes.
Can anyone give me a hand on this or even write the few lines?

The new FW can be found here:
http://ilpss8.dyndns.org/dvb-usb-tt-s2400-01.fw

Thank you.
André

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb