Skip to contentSkip to conversation

e1000e: Hardware CRC stripping doesn't work with 82566DM-2

DISCUSSION Johan Andersson 2 participants 3 messages Feb 6, 2008 – Feb 7, 2008

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Hi,

In commit 140a74802894e9db57e5cd77ccff77e590ece5f3 a workaround for crc stripping was removed. However, the hardware supported crc stripping now in use doesn't seem to work with the following chip:
Intel Corporation 82566DM-2 Gigabit Network Connection (rev 02) (8086:10bd)

I discovered this while trying to make this nic member of a bridge. Since some frames get too large for the bridge they are dropped, making it impossible to use this nic in a bridge.

Reverting this commit makes the nic and brigde work again.

Are there any more chips in this family suffering from this?

/Johan Andersson

#1 lore raw
Quoted 8 lines · Johan Andersson

Hi,

In commit 140a74802894e9db57e5cd77ccff77e590ece5f3 a workaround for crc stripping was removed.
However, the hardware supported crc stripping now in use doesn't seem to work with the following chip:
Intel Corporation 82566DM-2 Gigabit Network Connection (rev 02) (8086:10bd)

Quoted 7 lines

I discovered this while trying to make this nic member of a bridge. Since some frames get too large for the bridge they are dropped, making it impossible to use this nic in a bridge.

Reverting this commit makes the nic and brigde work again.

Are there any more chips in this family suffering from this?

I have only heard from this issue for 82566dm-2 chipsets, but I'm looking into it atm (time permitting). It has been reported by Herbert Xu to cause issues in the same matter last week.

I'm not sure what the real issue is right now, I hope to get an answer on this later.

Auke

#2 lore raw
Quoted 19 lines · Auke
Quoted 8 lines · Johan Andersson

Hi,

In commit 140a74802894e9db57e5cd77ccff77e590ece5f3 a workaround for crc stripping was removed.
However, the hardware supported crc stripping now in use doesn't seem to work with the following chip:
Intel Corporation 82566DM-2 Gigabit Network Connection (rev 02) (8086:10bd)

Quoted 8 lines

I discovered this while trying to make this nic member of a bridge. Since some frames get too large for the bridge they are dropped, making it impossible to use this nic in a bridge.

Reverting this commit makes the nic and brigde work again.

Are there any more chips in this family suffering from this?

Quoted 9 lines

I have only heard from this issue for 82566dm-2 chipsets, but I'm looking into it atm (time permitting). It has been reported by Herbert Xu to cause issues in the same matter last week.

I'm not sure what the real issue is right now, I hope to get an answer on this later.

Auke

Ok, thanks. Tell me if I can help out in any way.

/Johan