dnt DA3 Hybrid USB DVB-T Driver ?

Hi

I´m using an 1 year old usb stick from dnt ( german company ) Only one forum post for "704DTVBOX"
thats all :(

on www.bttv-gallery.de there are some pictures and more infos about this stick

"chips: Trident TVmaster TM6000, intel WJMT352, xceive xc3028acq" "pcb: 704D_V1.1 2006.05.24"

now some output from lsusb -v

Bus 005 Device 002: ID 13d3:3213 IMC Networks
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x13d3 IMC Networks
idProduct 0x3213
bcdDevice 0.01
iManufacturer 16 DVB
iProduct 32 704DTVBOX
iSerial 64 0008CA123456

any suggestions ?

Best regards,
Rob

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Hi,

ok some success.
http://www.linuxtv.org/v4lwiki/index.php/Trident_TM6000
I changed the idVendor to 13d3 and idProduct to 3213. Build it and the modprobe says:
"couldn't attach zl10353"

Yes right, no zl10353 demodulator.
Hmm and now ??
Some strings from windows driver.

[snip]
Hw_Factory_Check: XC3028 Normal Power Version!
Hw_Factory_Check: XC3028 Low Power Version!
Hw_Factory_Check: WT620M!
Hw_Factory_Check: VP704D!
[snip]
and this here..
[snip]
Hw_Get_SignalProperties: MT352
[snip]

How can i change the zl10353 to MT352 ?
Is this in tm6000.c a real zl10353 or a dirty copy n paste ?

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb