Skip to contentSkip to conversation

AE_ERROR, ACPI thermal trip point state changed

DISCUSSION Németh Márton 4 participants 18 messages Feb 14, 2008 – Jan 15, 2009 1 message not in the archive

Subsystems (2)
ACPI ACPI thermal driver
lore
Share & tools
lore
author
#2 lore raw

Hi,

in my dmesg the following lines appear with linux-2.6.25-rc4 on Clevo D410J laptop:

ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state changed Please send acpidump to [email protected]
[20070126]

Should I do something else than sending the acpidump?

Márton Németh

Quoted 11 lines · Németh Márton

Hi,

I get the following message from the kernel 2.6.25-rc1 on Clevo D410J laptop:

ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state changed Please send acpidump to [email protected]
[20070126]

So I am writing this email to you.

Márton Németh

Linux version 2.6.25-rc4 (nmarci@europa) (gcc version 4.2.3 20080114 (prerelease) (Debian 4.2.2-7)) #1 PREEMPT Wed Mar 5 21:34:08 CET 2008 BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003bf70000 (usable)
BIOS-e820: 000000003bf70000 - 000000003bf7a000 (ACPI data)
BIOS-e820: 000000003bf7a000 - 000000003bf80000 (ACPI NVS)
BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
63MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f6870] 000f6870
Entering add_active_range(0, 0, 245616) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 245616
Movable zone start PFN for each node
early_node_map[1] active PFN ranges

    0:        0 ->   245616

On node 0 totalpages: 245616
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 126 pages used for memmap
HighMem zone: 16114 pages, LIFO batch:3
Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F68D0, 0014 (r0 PTLTD )
ACPI: RSDT 3BF7600B, 0030 (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 3BF79E87, 0074 (r1 AMDK8 PTLTW 6040000 PTL_ F4240)
ACPI: DSDT 3BF7603B, 3E4C (r1 VIA PTL_ACPI 6040000 MSFT 100000E)
ACPI: FACS 3BF7AFC0, 0040
ACPI: SSDT 3BF79EFB, 00B5 (r1 PTLTD POWERNOW 6040000 LTP 1)
ACPI: APIC 3BF79FB0, 0050 (r1 PTLTD APIC 6040000 LTP 0)
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:12 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ10 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bffe0000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d8000
PM: Registered nosave memory: 00000000000d8000 - 0000000000100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243698 Kernel command line: root=/dev/hda3 ro log_buf_len=1M resume=/dev/hda2
log_buf_len: 1048576
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1603.695 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 2048
... CLASSHASH_SIZE: 1024

... MAX_LOCKDEP_ENTRIES:     8192
... MAX_LOCKDEP_CHAINS:      16384
... CHAINHASH_SIZE:          8192

memory used by lock dependency info: 992 kB
per task-struct memory footprint: 1920 bytes
------------------------
| Locking API testsuite:
----------------------------------------------------------------------------
| spin |wlock |rlock |mutex | wsem | rsem |
--------------------------------------------------------------------------

                     A-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                 A-B-B-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
             A-B-B-C-C-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
             A-B-C-A-B-C deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
         A-B-B-C-C-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
         A-B-C-D-B-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
         A-B-C-D-B-C-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                    double unlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                  initialize held:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                 bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
  --------------------------------------------------------------------------
              recursive read-lock:             |  ok  |             |  ok  |
           recursive read-lock #2:             |  ok  |             |  ok  |
            mixed read-write-lock:             |  ok  |             |  ok  |
            mixed write-read-lock:             |  ok  |             |  ok  |
  --------------------------------------------------------------------------
     hard-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
     soft-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
     hard-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
     soft-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
       sirq-safe-A => hirqs-on/12:  ok  |  ok  |  ok  |
       sirq-safe-A => hirqs-on/21:  ok  |  ok  |  ok  |
         hard-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
         soft-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
         hard-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
         soft-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/123:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/123:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/132:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/132:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/213:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/213:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/231:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/231:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/312:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/312:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/321:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/321:  ok  |  ok  |  ok  |
      hard-irq read-recursion/123:  ok  |
      soft-irq read-recursion/123:  ok  |
      hard-irq read-recursion/132:  ok  |
      soft-irq read-recursion/132:  ok  |
      hard-irq read-recursion/213:  ok  |
      soft-irq read-recursion/213:  ok  |
      hard-irq read-recursion/231:  ok  |
      soft-irq read-recursion/231:  ok  |
      hard-irq read-recursion/312:  ok  |
      soft-irq read-recursion/312:  ok  |
      hard-irq read-recursion/321:  ok  |
      soft-irq read-recursion/321:  ok  |

-------------------------------------------------------
Good, all 218 testcases passed! |
---------------------------------
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 966876k/982464k available (2071k kernel code, 15072k reserved, 891k data, 272k init, 64960k highmem) virtual kernel memory layout:

    fixmap  : 0xfffa8000 - 0xfffff000   ( 348 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc03e8000 - 0xc042c000   ( 272 kB)
      .data : 0xc0305c2b - 0xc03e4c18   ( 891 kB)
      .text : 0xc0100000 - 0xc0305c2b   (2071 kB)

Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
Calibrating delay using timer specific routine.. 3210.53 BogoMIPS (lpj=1605269) Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 128K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
CPU: AMD Mobile AMD Sempron(tm) Processor 2600+ stepping 00
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 480 Objects with 49 Devices 147 Methods 13 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 3 Objects with 0 Devices 0 Methods 0 Regions
tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
net_namespace: 604 bytes
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd88c, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0xA
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0 Runtime GPEs in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:..................................................... Initialized 11/13 Regions 1/1 Fields 23/24 Buffers 18/26 Packages (492 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:.
Executed 1 _INI methods requiring 1 _STA executions (examined 53 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: missing write data confirmation, don't expect it any longer.
ACPI: EC: GPE = 0xb, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM
pci 0000:00:11.0: quirk: region 8100-810f claimed by vt8235 SMB
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *11, disabled.
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *10, disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *5, disabled.
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
00:05: calling quirk 0xc025ae70: quirk_supermicro_h8dce_system+0x0/0x110()
pnp 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
00:06: calling quirk 0xc025ae70: quirk_supermicro_h8dce_system+0x0/0x110()
pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: the driver 'system' has been registered
system 00:05: iomem range 0x0-0x9ffff could not be reserved
system 00:05: iomem range 0xe0000-0xfffff could not be reserved
system 00:05: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:05: iomem range 0xffee0000-0xffefffff has been reserved
system 00:05: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:05: driver attached
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:06: ioport range 0xfe10-0xfe11 has been reserved
system 00:06: ioport range 0xfe00-0xfe00 has been reserved
system 00:06: ioport range 0x4000-0x407f has been reserved
system 00:06: ioport range 0x8100-0x811f could not be reserved
Time: tsc clocksource has been installed.
system 00:06: driver attached
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: 0xd1000000-0xd1ffffff
PREFETCH window: 0x00000000f0000000-0x00000000f3ffffff
PCI: Bus 2, cardbus bridge: 0000:00:0c.0
IO window: 0x00002000-0x000020ff
IO window: 0x00002400-0x000024ff
PREFETCH window: 0x50000000-0x53ffffff
MEM window: 0x54000000-0x57ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Enabling device 0000:00:0c.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:0c.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1204788516.711:1): initialized
highmem bounce pool size: 64 pages
io scheduler noop registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
pci 0000:01:00.0: Boot video device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:11.1
ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug
ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 23
ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 23 (level, low) -> IRQ 23
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1

    ide0: BM-DMA at 0x1c60-0x1c67, BIOS settings: hda:DMA, hdb:PIO
    ide1: BM-DMA at 0x1c68-0x1c6f, BIOS settings: hdc:DMA, hdd:PIO

Probing IDE interface ide0...
Switched to high resolution mode on CPU 0
hdb: IRQ probe failed (0xfffffbfe)
hdb: IRQ probe failed (0xfffffbfe)
hda: SAMSUNG MP0804H, ATA DISK drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
Probing IDE interface ide1...
hdc: Optiarc DVD RW AD-7543A, ATAPI CD/DVD-ROM drive
hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
pnp: the driver 'ide' has been registered
hda: max request size: 512KiB
hda: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=16383/255/63
hda: cache flushes supported
hda: hda1 hda2 hda3
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 272k freed
Write protecting the kernel read-only data: 732k
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: ACPI0007:00 is registered as cooling_device0
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWB]
input: Sleep Button (CM) as /class/input/input2
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /class/input/input3
ACPI: Lid Switch [LID]
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THRM] (14 C)
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
Yenta: CardBus bridge found at 0000:00:0c.0 [1558:4702]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0c.0, mfunc 0x00001002, devctl 0x44
8139too Fast Ethernet driver 0.9.28
hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
Yenta: ISA IRQ mask 0x0840, PCI irq 16
Socket status: 30000006
ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 19
eth0: RealTek RTL8139 at 0xf88fa000, 00:90:f5:3e:5a:ca, IRQ 19
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Marking TSC unstable due to: possible TSC halt in C2.
Time: acpi_pm clocksource has been installed.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
input: PC Speaker as /class/input/input4
pnp: the driver 'parport_pc' has been registered
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.12ac
parport_pc 00:0a: driver attached
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug
ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21
ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 21, io base 0x00001c00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 21, io base 0x00001c20
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 21, io base 0x00001c40
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
pnp: the driver 'serial' has been registered
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 00:09: driver attached
ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:10.3: irq 21, io mem 0xd0004400
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
cs: IO port probe 0x100-0x4ff: clean.
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug
ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:11.6 to 64
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:11.5 to 64
Adding 1951888k swap on /dev/hda2. Priority:-1 extents:1 across:1951888k
pnp: the driver 'i8042 kbd' has been registered
i8042 kbd 00:08: driver attached
pnp: the driver 'i8042 aux' has been registered
i8042 aux 00:07: driver attached

PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard as /class/input/input5
powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 2600+ processors (1 cpu cores) (version 2.20.00)
powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0x6
powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x18
powernow-k8: ph2 null fid transition 0x8
input: PS/2 Mouse as /class/input/input6
input: AlpsPS/2 ALPS GlidePoint as /class/input/input7
mice: PS/2 mouse device common for all mice

Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized via 2.11.1 20070202 on minor 0
leds_clevo_mail: 'Clevo D410J' found
Registered led device: clevo::mail
ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state changed
Please send acpidump to [email protected]
[20070126]
ReiserFS: hda1: found reiserfs format "3.6" with standard journal
ReiserFS: hda1: using ordered data mode
ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda1: checking transaction log (hda1)
ReiserFS: hda1: Using r5 hash to sort names
ip_tables: (C) 2000-2006 Netfilter Core Team
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
NET: Registered protocol family 10
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
Clocksource tsc unstable (delta = -282353088 ns)
eth0: no IPv6 routers present
warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
irq 16: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Not tainted 2.6.25-rc4 #1

 [<c0157227>] __report_bad_irq+0x27/0x90
 [<c01574c6>] note_interrupt+0x236/0x270
 [<c01568d3>] ? handle_IRQ_event+0x53/0x60
 [<c0157b6a>] handle_fasteoi_irq+0x7a/0xd0
 [<c0106174>] do_IRQ+0x44/0xa0
 [<c0104c66>] common_interrupt+0x2e/0x34
 [<c0301ac8>] ? _spin_unlock_irq+0x28/0x50
 [<c0118974>] finish_task_switch+0x54/0xc0
 [<c0118920>] ? finish_task_switch+0x0/0xc0
 [<c02ff326>] schedule+0x2b6/0x470
 [<f892fdae>] ? acpi_processor_idle+0x0/0x436 [processor]
 [<c0102b65>] cpu_idle+0xb5/0xd0
 [<c02fa66c>] rest_init+0x5c/0x60
 =======================

handlers:
[<f8915830>] (yenta_interrupt+0x0/0xe0 [yenta_socket]) [<f8aee3f0>] (via_driver_irq_handler+0x0/0x1c0 [via]) Disabling IRQ #16

reviewer
#3 lore raw

hi, Márton,

Please re-send the acpidump using the latest pmtools at
http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/

thanks,
rui

Quoted 502 lines · Németh Márton

Hi,

in my dmesg the following lines appear with linux-2.6.25-rc4 on Clevo D410J laptop:

ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state changed Please send acpidump to [email protected]
[20070126]

Should I do something else than sending the acpidump?

Márton Németh

Quoted 11 lines · Németh Márton

Hi,

I get the following message from the kernel 2.6.25-rc1 on Clevo D410J laptop:

ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state changed Please send acpidump to [email protected]
[20070126]

So I am writing this email to you.

Márton Németh

plain text document attachment (dmesg-2.6.25-rc4.txt)
Linux version 2.6.25-rc4 (nmarci@europa) (gcc version 4.2.3 20080114 (prerelease) (Debian 4.2.2-7)) #1 PREEMPT Wed Mar 5 21:34:08 CET 2008 BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003bf70000 (usable)
BIOS-e820: 000000003bf70000 - 000000003bf7a000 (ACPI data)
BIOS-e820: 000000003bf7a000 - 000000003bf80000 (ACPI NVS)
BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
63MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f6870] 000f6870
Entering add_active_range(0, 0, 245616) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 245616
Movable zone start PFN for each node
early_node_map[1] active PFN ranges

    0:        0 ->   245616

On node 0 totalpages: 245616
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 126 pages used for memmap
HighMem zone: 16114 pages, LIFO batch:3
Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F68D0, 0014 (r0 PTLTD )
ACPI: RSDT 3BF7600B, 0030 (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 3BF79E87, 0074 (r1 AMDK8 PTLTW 6040000 PTL_ F4240)
ACPI: DSDT 3BF7603B, 3E4C (r1 VIA PTL_ACPI 6040000 MSFT 100000E)
ACPI: FACS 3BF7AFC0, 0040
ACPI: SSDT 3BF79EFB, 00B5 (r1 PTLTD POWERNOW 6040000 LTP 1)
ACPI: APIC 3BF79FB0, 0050 (r1 PTLTD APIC 6040000 LTP 0)
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:12 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ10 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bffe0000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d8000
PM: Registered nosave memory: 00000000000d8000 - 0000000000100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243698 Kernel command line: root=/dev/hda3 ro log_buf_len=1M resume=/dev/hda2
log_buf_len: 1048576
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1603.695 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 2048
... CLASSHASH_SIZE: 1024

... MAX_LOCKDEP_ENTRIES:     8192
... MAX_LOCKDEP_CHAINS:      16384
... CHAINHASH_SIZE:          8192

memory used by lock dependency info: 992 kB
per task-struct memory footprint: 1920 bytes
------------------------
| Locking API testsuite:
----------------------------------------------------------------------------
| spin |wlock |rlock |mutex | wsem | rsem |
--------------------------------------------------------------------------

                     A-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                 A-B-B-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
             A-B-B-C-C-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
             A-B-C-A-B-C deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
         A-B-B-C-C-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
         A-B-C-D-B-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
         A-B-C-D-B-C-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                    double unlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                  initialize held:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                 bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
  --------------------------------------------------------------------------
              recursive read-lock:             |  ok  |             |  ok  |
           recursive read-lock #2:             |  ok  |             |  ok  |
            mixed read-write-lock:             |  ok  |             |  ok  |
            mixed write-read-lock:             |  ok  |             |  ok  |
  --------------------------------------------------------------------------
     hard-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
     soft-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
     hard-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
     soft-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
       sirq-safe-A => hirqs-on/12:  ok  |  ok  |  ok  |
       sirq-safe-A => hirqs-on/21:  ok  |  ok  |  ok  |
         hard-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
         soft-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
         hard-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
         soft-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/123:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/123:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/132:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/132:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/213:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/213:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/231:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/231:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/312:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/312:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/321:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/321:  ok  |  ok  |  ok  |
      hard-irq read-recursion/123:  ok  |
      soft-irq read-recursion/123:  ok  |
      hard-irq read-recursion/132:  ok  |
      soft-irq read-recursion/132:  ok  |
      hard-irq read-recursion/213:  ok  |
      soft-irq read-recursion/213:  ok  |
      hard-irq read-recursion/231:  ok  |
      soft-irq read-recursion/231:  ok  |
      hard-irq read-recursion/312:  ok  |
      soft-irq read-recursion/312:  ok  |
      hard-irq read-recursion/321:  ok  |
      soft-irq read-recursion/321:  ok  |

-------------------------------------------------------
Good, all 218 testcases passed! |
---------------------------------
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 966876k/982464k available (2071k kernel code, 15072k reserved, 891k data, 272k init, 64960k highmem) virtual kernel memory layout:

    fixmap  : 0xfffa8000 - 0xfffff000   ( 348 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc03e8000 - 0xc042c000   ( 272 kB)
      .data : 0xc0305c2b - 0xc03e4c18   ( 891 kB)
      .text : 0xc0100000 - 0xc0305c2b   (2071 kB)

Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
Calibrating delay using timer specific routine.. 3210.53 BogoMIPS (lpj=1605269) Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 128K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
CPU: AMD Mobile AMD Sempron(tm) Processor 2600+ stepping 00
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 480 Objects with 49 Devices 147 Methods 13 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 3 Objects with 0 Devices 0 Methods 0 Regions
tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
net_namespace: 604 bytes
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd88c, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0xA
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0 Runtime GPEs in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:..................................................... Initialized 11/13 Regions 1/1 Fields 23/24 Buffers 18/26 Packages (492 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:.
Executed 1 _INI methods requiring 1 _STA executions (examined 53 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: missing write data confirmation, don't expect it any longer.
ACPI: EC: GPE = 0xb, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM
pci 0000:00:11.0: quirk: region 8100-810f claimed by vt8235 SMB
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *11, disabled.
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *10, disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *5, disabled.
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
00:05: calling quirk 0xc025ae70: quirk_supermicro_h8dce_system+0x0/0x110()
pnp 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
00:06: calling quirk 0xc025ae70: quirk_supermicro_h8dce_system+0x0/0x110()
pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: the driver 'system' has been registered
system 00:05: iomem range 0x0-0x9ffff could not be reserved
system 00:05: iomem range 0xe0000-0xfffff could not be reserved
system 00:05: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:05: iomem range 0xffee0000-0xffefffff has been reserved
system 00:05: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:05: driver attached
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:06: ioport range 0xfe10-0xfe11 has been reserved
system 00:06: ioport range 0xfe00-0xfe00 has been reserved
system 00:06: ioport range 0x4000-0x407f has been reserved
system 00:06: ioport range 0x8100-0x811f could not be reserved
Time: tsc clocksource has been installed.
system 00:06: driver attached
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: 0xd1000000-0xd1ffffff
PREFETCH window: 0x00000000f0000000-0x00000000f3ffffff
PCI: Bus 2, cardbus bridge: 0000:00:0c.0
IO window: 0x00002000-0x000020ff
IO window: 0x00002400-0x000024ff
PREFETCH window: 0x50000000-0x53ffffff
MEM window: 0x54000000-0x57ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Enabling device 0000:00:0c.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:0c.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1204788516.711:1): initialized
highmem bounce pool size: 64 pages
io scheduler noop registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
pci 0000:01:00.0: Boot video device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:11.1
ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug
ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 23
ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 23 (level, low) -> IRQ 23
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1

    ide0: BM-DMA at 0x1c60-0x1c67, BIOS settings: hda:DMA, hdb:PIO
    ide1: BM-DMA at 0x1c68-0x1c6f, BIOS settings: hdc:DMA, hdd:PIO

Probing IDE interface ide0...
Switched to high resolution mode on CPU 0
hdb: IRQ probe failed (0xfffffbfe)
hdb: IRQ probe failed (0xfffffbfe)
hda: SAMSUNG MP0804H, ATA DISK drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
Probing IDE interface ide1...
hdc: Optiarc DVD RW AD-7543A, ATAPI CD/DVD-ROM drive
hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
pnp: the driver 'ide' has been registered
hda: max request size: 512KiB
hda: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=16383/255/63
hda: cache flushes supported
hda: hda1 hda2 hda3
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 272k freed
Write protecting the kernel read-only data: 732k
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: ACPI0007:00 is registered as cooling_device0
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWB]
input: Sleep Button (CM) as /class/input/input2
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /class/input/input3
ACPI: Lid Switch [LID]
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THRM] (14 C)
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
Yenta: CardBus bridge found at 0000:00:0c.0 [1558:4702]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0c.0, mfunc 0x00001002, devctl 0x44
8139too Fast Ethernet driver 0.9.28
hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
Yenta: ISA IRQ mask 0x0840, PCI irq 16
Socket status: 30000006
ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 19
eth0: RealTek RTL8139 at 0xf88fa000, 00:90:f5:3e:5a:ca, IRQ 19
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Marking TSC unstable due to: possible TSC halt in C2.
Time: acpi_pm clocksource has been installed.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
input: PC Speaker as /class/input/input4
pnp: the driver 'parport_pc' has been registered
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.12ac
parport_pc 00:0a: driver attached
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug
ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21
ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 21, io base 0x00001c00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 21, io base 0x00001c20
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 21, io base 0x00001c40
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
pnp: the driver 'serial' has been registered
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 00:09: driver attached
ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:10.3: irq 21, io mem 0xd0004400
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
cs: IO port probe 0x100-0x4ff: clean.
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug
ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:11.6 to 64
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:11.5 to 64
Adding 1951888k swap on /dev/hda2. Priority:-1 extents:1 across:1951888k
pnp: the driver 'i8042 kbd' has been registered
i8042 kbd 00:08: driver attached
pnp: the driver 'i8042 aux' has been registered
i8042 aux 00:07: driver attached

PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard as /class/input/input5
powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 2600+ processors (1 cpu cores) (version 2.20.00)
powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0x6
powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x18
powernow-k8: ph2 null fid transition 0x8
input: PS/2 Mouse as /class/input/input6
input: AlpsPS/2 ALPS GlidePoint as /class/input/input7
mice: PS/2 mouse device common for all mice

Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized via 2.11.1 20070202 on minor 0
leds_clevo_mail: 'Clevo D410J' found
Registered led device: clevo::mail
ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state changed
Please send acpidump to [email protected]
[20070126]
ReiserFS: hda1: found reiserfs format "3.6" with standard journal
ReiserFS: hda1: using ordered data mode
ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda1: checking transaction log (hda1)
ReiserFS: hda1: Using r5 hash to sort names
ip_tables: (C) 2000-2006 Netfilter Core Team
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
NET: Registered protocol family 10
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
Clocksource tsc unstable (delta = -282353088 ns)
eth0: no IPv6 routers present
warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
irq 16: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Not tainted 2.6.25-rc4 #1

 [<c0157227>] __report_bad_irq+0x27/0x90
 [<c01574c6>] note_interrupt+0x236/0x270
 [<c01568d3>] ? handle_IRQ_event+0x53/0x60
 [<c0157b6a>] handle_fasteoi_irq+0x7a/0xd0
 [<c0106174>] do_IRQ+0x44/0xa0
 [<c0104c66>] common_interrupt+0x2e/0x34
 [<c0301ac8>] ? _spin_unlock_irq+0x28/0x50
 [<c0118974>] finish_task_switch+0x54/0xc0
 [<c0118920>] ? finish_task_switch+0x0/0xc0
 [<c02ff326>] schedule+0x2b6/0x470
 [<f892fdae>] ? acpi_processor_idle+0x0/0x436 [processor]
 [<c0102b65>] cpu_idle+0xb5/0xd0
 [<c02fa66c>] rest_init+0x5c/0x60
 =======================
Quoted 4 lines

handlers:
[<f8915830>] (yenta_interrupt+0x0/0xe0 [yenta_socket]) [<f8aee3f0>] (via_driver_irq_handler+0x0/0x1c0 [via]) Disabling IRQ #16

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

reviewer
#4 lore raw

Please attach the result of "cat /proc/acpi/thermal_zone/*/*" after this message is shown.

Thanks,
rui

Quoted 563 lines

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Zhang, Rui
Sent: Thursday, March 06, 2008 6:50 AM
To: Németh Márton
Cc: [email protected]; LKML
Subject: Re: AE_ERROR, ACPI thermal trip point state changed

hi, Márton,

Please re-send the acpidump using the latest pmtools at
http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/

thanks,
rui

Quoted 3 lines · Németh Márton

Hi,

in my dmesg the following lines appear with linux-2.6.25-rc4 on Clevo D410J

laptop:

Quoted 5 lines

ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state changed Please send acpidump to [email protected]
[20070126]

Quoted 11 lines

Should I do something else than sending the acpidump?

Márton Németh

Quoted 5 lines · Németh Márton

Hi,

I get the following message from the kernel 2.6.25-rc1 on Clevo D410J laptop:

ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state

changed

Quoted 9 lines
Quoted 6 lines

Please send acpidump to [email protected]
[20070126]

So I am writing this email to you.

Márton Németh

plain text document attachment (dmesg-2.6.25-rc4.txt) Linux version 2.6.25-rc4 (nmarci@europa) (gcc version 4.2.3 20080114

(prerelease) (Debian 4.2.2-7)) #1 PREEMPT Wed Mar 5 21:34:08 CET 2008

Quoted 74 lines

BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003bf70000 (usable)
BIOS-e820: 000000003bf70000 - 000000003bf7a000 (ACPI data)
BIOS-e820: 000000003bf7a000 - 000000003bf80000 (ACPI NVS)
BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
63MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f6870] 000f6870
Entering add_active_range(0, 0, 245616) 0 entries of 256 used Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 245616
Movable zone start PFN for each node early_node_map[1] active PFN ranges

    0:        0 ->   245616

On node 0 totalpages: 245616
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 126 pages used for memmap
HighMem zone: 16114 pages, LIFO batch:3
Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F68D0, 0014 (r0 PTLTD )
ACPI: RSDT 3BF7600B, 0030 (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 3BF79E87, 0074 (r1 AMDK8 PTLTW 6040000 PTL_ F4240)
ACPI: DSDT 3BF7603B, 3E4C (r1 VIA PTL_ACPI 6040000 MSFT 100000E)
ACPI: FACS 3BF7AFC0, 0040
ACPI: SSDT 3BF79EFB, 00B5 (r1 PTLTD POWERNOW 6040000 LTP 1)
ACPI: APIC 3BF79FB0, 0050 (r1 PTLTD APIC 6040000 LTP 0)
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:12 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ10 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bffe0000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d8000
PM: Registered nosave memory: 00000000000d8000 - 0000000000100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243698 Kernel command line: root=/dev/hda3 ro log_buf_len=1M resume=/dev/hda2
log_buf_len: 1048576
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1603.695 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 2048
... CLASSHASH_SIZE: 1024

Quoted 8 lines
... MAX_LOCKDEP_ENTRIES:     8192
... MAX_LOCKDEP_CHAINS:      16384
... CHAINHASH_SIZE:          8192

memory used by lock dependency info: 992 kB
per task-struct memory footprint: 1920 bytes
------------------------
| Locking API testsuite:

---------------------------------------------------------------------------
-

Quoted 1 line

| spin |wlock |rlock |mutex | wsem | rsem

|

Quoted 1 line

--------------------------------------------------------------------------

Quoted 1 line

A-A deadlock: ok | ok | ok | ok | ok | ok

|

Quoted 1 line

A-B-B-A deadlock: ok | ok | ok | ok | ok | ok

|

Quoted 1 line

A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok

|

Quoted 1 line

A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok

|

Quoted 1 line

A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok

|

Quoted 1 line

A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok

|

Quoted 1 line

A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok

|

Quoted 1 line

double unlock: ok | ok | ok | ok | ok | ok

|

Quoted 1 line

initialize held: ok | ok | ok | ok | ok | ok

|

Quoted 1 line

bad unlock order: ok | ok | ok | ok | ok | ok

|

Quoted 1 line

--------------------------------------------------------------------------

Quoted 1 line

recursive read-lock: | ok | | ok

|

Quoted 1 line

recursive read-lock #2: | ok | | ok

|

Quoted 1 line

mixed read-write-lock: | ok | | ok

|

Quoted 1 line

mixed write-read-lock: | ok | | ok

|

Quoted 1 line

--------------------------------------------------------------------------

Quoted 58 lines
     hard-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
     soft-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
     hard-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
     soft-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
       sirq-safe-A => hirqs-on/12:  ok  |  ok  |  ok  |
       sirq-safe-A => hirqs-on/21:  ok  |  ok  |  ok  |
         hard-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
         soft-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
         hard-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
         soft-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/123:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/123:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/132:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/132:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/213:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/213:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/231:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/231:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/312:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/312:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/321:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/321:  ok  |  ok  |  ok  |
      hard-irq read-recursion/123:  ok  |
      soft-irq read-recursion/123:  ok  |
      hard-irq read-recursion/132:  ok  |
      soft-irq read-recursion/132:  ok  |
      hard-irq read-recursion/213:  ok  |
      soft-irq read-recursion/213:  ok  |
      hard-irq read-recursion/231:  ok  |
      soft-irq read-recursion/231:  ok  |
      hard-irq read-recursion/312:  ok  |
      soft-irq read-recursion/312:  ok  |
      hard-irq read-recursion/321:  ok  |
      soft-irq read-recursion/321:  ok  |
Quoted 6 lines

-------------------------------------------------------
Good, all 218 testcases passed! |
---------------------------------
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 966876k/982464k available (2071k kernel code, 15072k reserved, 891k

data, 272k init, 64960k highmem)

Quoted 11 lines

virtual kernel memory layout:

    fixmap  : 0xfffa8000 - 0xfffff000   ( 348 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc03e8000 - 0xc042c000   ( 272 kB)
      .data : 0xc0305c2b - 0xc03e4c18   ( 891 kB)
      .text : 0xc0100000 - 0xc0305c2b   (2071 kB)

Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated Calibrating delay using timer specific routine.. 3210.53 BogoMIPS

(lpj=1605269)

Quoted 18 lines

Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 128K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
CPU: AMD Mobile AMD Sempron(tm) Processor 2600+ stepping 00 Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 480 Objects with 49 Devices 147 Methods 13 Regions Parsing all Control Methods:
Table [SSDT](id 0002) - 3 Objects with 0 Devices 0 Methods 0 Regions
tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0

Quoted 8 lines

net_namespace: 604 bytes
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd88c, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int

0xA

Quoted 1 line

evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0 Runtime

GPEs in this block

Quoted 2 lines

ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package

initialization:.....................................................

Quoted 84 lines

Initialized 11/13 Regions 1/1 Fields 23/24 Buffers 18/26 Packages (492 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:. Executed 1 _INI methods requiring 1 _STA executions (examined 53 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: missing write data confirmation, don't expect it any longer.
ACPI: EC: GPE = 0xb, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM pci 0000:00:11.0: quirk: region 8100-810f claimed by vt8235 SMB
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *11, disabled.
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *10, disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *5, disabled.
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
00:05: calling quirk 0xc025ae70: quirk_supermicro_h8dce_system+0x0/0x110()
pnp 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
00:06: calling quirk 0xc025ae70: quirk_supermicro_h8dce_system+0x0/0x110()
pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: the driver 'system' has been registered
system 00:05: iomem range 0x0-0x9ffff could not be reserved system 00:05: iomem range 0xe0000-0xfffff could not be reserved system 00:05: iomem range 0xfff00000-0xffffffff could not be reserved system 00:05: iomem range 0xffee0000-0xffefffff has been reserved system 00:05: iomem range 0xfec00000-0xfec00fff has been reserved system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved system 00:05: driver attached
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:06: ioport range 0xfe10-0xfe11 has been reserved
system 00:06: ioport range 0xfe00-0xfe00 has been reserved
system 00:06: ioport range 0x4000-0x407f has been reserved
system 00:06: ioport range 0x8100-0x811f could not be reserved
Time: tsc clocksource has been installed.
system 00:06: driver attached
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: 0xd1000000-0xd1ffffff
PREFETCH window: 0x00000000f0000000-0x00000000f3ffffff
PCI: Bus 2, cardbus bridge: 0000:00:0c.0
IO window: 0x00002000-0x000020ff
IO window: 0x00002400-0x000024ff
PREFETCH window: 0x50000000-0x53ffffff
MEM window: 0x54000000-0x57ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Enabling device 0000:00:0c.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:0c.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1204788516.711:1): initialized
highmem bounce pool size: 64 pages
io scheduler noop registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
pci 0000:01:00.0: Boot video device
isapnp: Scanning for PnP cards...

Quoted 8 lines

isapnp: No Plug & Play device found
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:11.1
ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug
ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 23
ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 23 (level, low) ->

IRQ 23

Quoted 21 lines

VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1

    ide0: BM-DMA at 0x1c60-0x1c67, BIOS settings: hda:DMA, hdb:PIO
    ide1: BM-DMA at 0x1c68-0x1c6f, BIOS settings: hdc:DMA, hdd:PIO

Probing IDE interface ide0...
Switched to high resolution mode on CPU 0
hdb: IRQ probe failed (0xfffffbfe)
hdb: IRQ probe failed (0xfffffbfe)
hda: SAMSUNG MP0804H, ATA DISK drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
Probing IDE interface ide1...
hdc: Optiarc DVD RW AD-7543A, ATAPI CD/DVD-ROM drive
hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
pnp: the driver 'ide' has been registered
hda: max request size: 512KiB
hda: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=16383/255/63
hda: cache flushes supported

Quoted 8 lines

hda: hda1 hda2 hda3
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block

18, max trans len 1024, max batch 900, max commit age 30, max trans age 30

Quoted 32 lines

ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 272k freed
Write protecting the kernel read-only data: 732k
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: ACPI0007:00 is registered as cooling_device0
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWB]
input: Sleep Button (CM) as /class/input/input2
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /class/input/input3
ACPI: Lid Switch [LID]
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THRM] (14 C)
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
Yenta: CardBus bridge found at 0000:00:0c.0 [1558:4702]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0c.0, mfunc 0x00001002, devctl 0x44 8139too Fast Ethernet driver 0.9.28
hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20
Yenta: ISA IRQ mask 0x0840, PCI irq 16
Socket status: 30000006
ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 19
eth0: RealTek RTL8139 at 0xf88fa000, 00:90:f5:3e:5a:ca, IRQ 19
eth0: Identified 8139 chip type 'RTL-8100B/8139D' Marking TSC unstable due to: possible TSC halt in C2.

Quoted 8 lines

Time: acpi_pm clocksource has been installed.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
input: PC Speaker as /class/input/input4
pnp: the driver 'parport_pc' has been registered
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 1

[PCSPP,TRISTATE,COMPAT,ECP,DMA]

Quoted 9 lines

Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.12ac
parport_pc 00:0a: driver attached
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug
ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21
ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKD] -> GSI 21 (level, low) ->

IRQ 21

Quoted 7 lines

uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: irq 21, io base 0x00001c00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKD] -> GSI 21 (level, low) ->

IRQ 21

Quoted 7 lines

uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.1: irq 21, io base 0x00001c20
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKD] -> GSI 21 (level, low) ->

IRQ 21

Quoted 10 lines

uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.2: irq 21, io base 0x00001c40
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
pnp: the driver 'serial' has been registered
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 00:09: driver attached
ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKD] -> GSI 21 (level, low) ->

IRQ 21

Quoted 7 lines

ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:10.3: irq 21, io mem 0xd0004400
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected

Quoted 8 lines

cs: IO port probe 0x100-0x4ff: clean.
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug
ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) ->

IRQ 22

Quoted 2 lines

PCI: Setting latency timer of device 0000:00:11.6 to 64
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) ->

IRQ 22

Quoted 7 lines

PCI: Setting latency timer of device 0000:00:11.5 to 64 Adding 1951888k swap on /dev/hda2. Priority:-1 extents:1 across:1951888k
pnp: the driver 'i8042 kbd' has been registered
i8042 kbd 00:08: driver attached
pnp: the driver 'i8042 aux' has been registered
i8042 aux 00:07: driver attached
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12

Quoted 8 lines

i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard as /class/input/input5
powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 2600+ processors (1 cpu

cores) (version 2.20.00)

Quoted 6 lines
powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0x6
powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x18
powernow-k8: ph2 null fid transition 0x8
input: PS/2 Mouse as /class/input/input6
input: AlpsPS/2 ALPS GlidePoint as /class/input/input7
mice: PS/2 mouse device common for all mice
Quoted 12 lines

Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized via 2.11.1 20070202 on minor 0
leds_clevo_mail: 'Clevo D410J' found
Registered led device: clevo::mail
ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state changed Please send acpidump to [email protected]
[20070126]
ReiserFS: hda1: found reiserfs format "3.6" with standard journal
ReiserFS: hda1: using ordered data mode
ReiserFS: hda1: journal params: device hda1, size 8192, journal first block

18, max trans len 1024, max batch 900, max commit age 30, max trans age 30

Quoted 26 lines

ReiserFS: hda1: checking transaction log (hda1)
ReiserFS: hda1: Using r5 hash to sort names
ip_tables: (C) 2000-2006 Netfilter Core Team
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
NET: Registered protocol family 10
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
Clocksource tsc unstable (delta = -282353088 ns)
eth0: no IPv6 routers present
warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) irq 16: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Not tainted 2.6.25-rc4 #1

 [<c0157227>] __report_bad_irq+0x27/0x90
 [<c01574c6>] note_interrupt+0x236/0x270
 [<c01568d3>] ? handle_IRQ_event+0x53/0x60
 [<c0157b6a>] handle_fasteoi_irq+0x7a/0xd0
 [<c0106174>] do_IRQ+0x44/0xa0
 [<c0104c66>] common_interrupt+0x2e/0x34
 [<c0301ac8>] ? _spin_unlock_irq+0x28/0x50
 [<c0118974>] finish_task_switch+0x54/0xc0
 [<c0118920>] ? finish_task_switch+0x0/0xc0
 [<c02ff326>] schedule+0x2b6/0x470
 [<f892fdae>] ? acpi_processor_idle+0x0/0x436 [processor]
 [<c0102b65>] cpu_idle+0xb5/0xd0
 [<c02fa66c>] rest_init+0x5c/0x60
 =======================
Quoted 4 lines

handlers:
[<f8915830>] (yenta_interrupt+0x0/0xe0 [yenta_socket]) [<f8aee3f0>] (via_driver_irq_handler+0x0/0x1c0 [via]) Disabling IRQ #16

Quoted 4 lines

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

author
#5 lore raw

Hi,

I downloaded pmtools from
http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/pmtools-20071116.tar.bz2 and
compiled: it created exactly the same result what my currently installed acpidump Debian package version 20071116-1. I think it is useless to send the same log again.

After I boot the "Please send acpidump to [email protected]" message is already there. So when I first get the prompt I checked for this message in dmesg and executed the given command. Here is my result:

# cat /proc/acpi/thermal_zone/*/*
0 - Active; 1 - Passive
<polling disabled>
state:                   ok
temperature:             42 C
critical (S5):           155 C
passive:                 84 C: tc1=2 tc2=5 tsp=0 devices=CPU0
active[0]:               70 C: devices=
# ls /proc/acpi/thermal_zone/*/*
/proc/acpi/thermal_zone/THRM/cooling_mode
/proc/acpi/thermal_zone/THRM/polling_frequency
/proc/acpi/thermal_zone/THRM/state
/proc/acpi/thermal_zone/THRM/temperature
/proc/acpi/thermal_zone/THRM/trip_points

Maybe this is related to http://bugzilla.kernel.org/show_bug.cgi?id=8544 ?

Márton Németh

Quoted 568 lines · Rui

Please attach the result of "cat /proc/acpi/thermal_zone/*/*" after this message is shown.

Thanks,
rui

Quoted 561 lines

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Zhang, Rui
Sent: Thursday, March 06, 2008 6:50 AM
To: Németh Márton
Cc: [email protected]; LKML
Subject: Re: AE_ERROR, ACPI thermal trip point state changed

hi, Márton,

Please re-send the acpidump using the latest pmtools at
http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/

thanks,
rui

Quoted 3 lines · Németh Márton

Hi,

in my dmesg the following lines appear with linux-2.6.25-rc4 on Clevo D410J

laptop:

Quoted 4 lines

ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state changed Please send acpidump to [email protected]
[20070126]

Quoted 11 lines

Should I do something else than sending the acpidump?

Márton Németh

Quoted 5 lines · Németh Márton

Hi,

I get the following message from the kernel 2.6.25-rc1 on Clevo D410J laptop:

ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state

changed

Quoted 8 lines
Quoted 6 lines

Please send acpidump to [email protected]
[20070126]

So I am writing this email to you.

Márton Németh

plain text document attachment (dmesg-2.6.25-rc4.txt) Linux version 2.6.25-rc4 (nmarci@europa) (gcc version 4.2.3 20080114

(prerelease) (Debian 4.2.2-7)) #1 PREEMPT Wed Mar 5 21:34:08 CET 2008

Quoted 74 lines

BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003bf70000 (usable)
BIOS-e820: 000000003bf70000 - 000000003bf7a000 (ACPI data)
BIOS-e820: 000000003bf7a000 - 000000003bf80000 (ACPI NVS)
BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
63MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f6870] 000f6870
Entering add_active_range(0, 0, 245616) 0 entries of 256 used Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 245616
Movable zone start PFN for each node early_node_map[1] active PFN ranges

    0:        0 ->   245616

On node 0 totalpages: 245616
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 126 pages used for memmap
HighMem zone: 16114 pages, LIFO batch:3
Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F68D0, 0014 (r0 PTLTD )
ACPI: RSDT 3BF7600B, 0030 (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 3BF79E87, 0074 (r1 AMDK8 PTLTW 6040000 PTL_ F4240)
ACPI: DSDT 3BF7603B, 3E4C (r1 VIA PTL_ACPI 6040000 MSFT 100000E)
ACPI: FACS 3BF7AFC0, 0040
ACPI: SSDT 3BF79EFB, 00B5 (r1 PTLTD POWERNOW 6040000 LTP 1)
ACPI: APIC 3BF79FB0, 0050 (r1 PTLTD APIC 6040000 LTP 0)
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:12 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ10 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bffe0000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d8000
PM: Registered nosave memory: 00000000000d8000 - 0000000000100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243698 Kernel command line: root=/dev/hda3 ro log_buf_len=1M resume=/dev/hda2
log_buf_len: 1048576
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1603.695 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 2048
... CLASSHASH_SIZE: 1024

Quoted 8 lines
... MAX_LOCKDEP_ENTRIES:     8192
... MAX_LOCKDEP_CHAINS:      16384
... CHAINHASH_SIZE:          8192

memory used by lock dependency info: 992 kB
per task-struct memory footprint: 1920 bytes
------------------------
| Locking API testsuite:

---------------------------------------------------------------------------
-

Quoted 1 line

| spin |wlock |rlock |mutex | wsem | rsem

|
--------------------------------------------------------------------------

Quoted 1 line

A-A deadlock: ok | ok | ok | ok | ok | ok

|

Quoted 1 line

A-B-B-A deadlock: ok | ok | ok | ok | ok | ok

|

Quoted 1 line

A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok

|

Quoted 1 line

A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok

|

Quoted 1 line

A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok

|

Quoted 1 line

A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok

|

Quoted 1 line

A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok

|

Quoted 1 line

double unlock: ok | ok | ok | ok | ok | ok

|

Quoted 1 line

initialize held: ok | ok | ok | ok | ok | ok

|

Quoted 1 line

bad unlock order: ok | ok | ok | ok | ok | ok

|
--------------------------------------------------------------------------

Quoted 1 line

recursive read-lock: | ok | | ok

|

Quoted 1 line

recursive read-lock #2: | ok | | ok

|

Quoted 1 line

mixed read-write-lock: | ok | | ok

|

Quoted 1 line

mixed write-read-lock: | ok | | ok

|
--------------------------------------------------------------------------

Quoted 58 lines
     hard-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
     soft-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
     hard-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
     soft-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
       sirq-safe-A => hirqs-on/12:  ok  |  ok  |  ok  |
       sirq-safe-A => hirqs-on/21:  ok  |  ok  |  ok  |
         hard-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
         soft-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
         hard-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
         soft-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/123:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/123:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/132:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/132:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/213:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/213:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/231:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/231:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/312:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/312:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/321:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/321:  ok  |  ok  |  ok  |
      hard-irq read-recursion/123:  ok  |
      soft-irq read-recursion/123:  ok  |
      hard-irq read-recursion/132:  ok  |
      soft-irq read-recursion/132:  ok  |
      hard-irq read-recursion/213:  ok  |
      soft-irq read-recursion/213:  ok  |
      hard-irq read-recursion/231:  ok  |
      soft-irq read-recursion/231:  ok  |
      hard-irq read-recursion/312:  ok  |
      soft-irq read-recursion/312:  ok  |
      hard-irq read-recursion/321:  ok  |
      soft-irq read-recursion/321:  ok  |
Quoted 6 lines

-------------------------------------------------------
Good, all 218 testcases passed! |
---------------------------------
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 966876k/982464k available (2071k kernel code, 15072k reserved, 891k

data, 272k init, 64960k highmem)

Quoted 11 lines

virtual kernel memory layout:

    fixmap  : 0xfffa8000 - 0xfffff000   ( 348 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc03e8000 - 0xc042c000   ( 272 kB)
      .data : 0xc0305c2b - 0xc03e4c18   ( 891 kB)
      .text : 0xc0100000 - 0xc0305c2b   (2071 kB)

Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated Calibrating delay using timer specific routine.. 3210.53 BogoMIPS

(lpj=1605269)

Quoted 18 lines

Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 128K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
CPU: AMD Mobile AMD Sempron(tm) Processor 2600+ stepping 00 Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 480 Objects with 49 Devices 147 Methods 13 Regions Parsing all Control Methods:
Table [SSDT](id 0002) - 3 Objects with 0 Devices 0 Methods 0 Regions
tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0

Quoted 8 lines

net_namespace: 604 bytes
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd88c, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int

0xA

Quoted 1 line

evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0 Runtime

GPEs in this block

Quoted 2 lines

ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package

initialization:.....................................................

Quoted 84 lines

Initialized 11/13 Regions 1/1 Fields 23/24 Buffers 18/26 Packages (492 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:. Executed 1 _INI methods requiring 1 _STA executions (examined 53 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: missing write data confirmation, don't expect it any longer.
ACPI: EC: GPE = 0xb, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM pci 0000:00:11.0: quirk: region 8100-810f claimed by vt8235 SMB
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *11, disabled.
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *10, disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *5, disabled.
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
00:05: calling quirk 0xc025ae70: quirk_supermicro_h8dce_system+0x0/0x110()
pnp 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
00:06: calling quirk 0xc025ae70: quirk_supermicro_h8dce_system+0x0/0x110()
pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: the driver 'system' has been registered
system 00:05: iomem range 0x0-0x9ffff could not be reserved system 00:05: iomem range 0xe0000-0xfffff could not be reserved system 00:05: iomem range 0xfff00000-0xffffffff could not be reserved system 00:05: iomem range 0xffee0000-0xffefffff has been reserved system 00:05: iomem range 0xfec00000-0xfec00fff has been reserved system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved system 00:05: driver attached
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:06: ioport range 0xfe10-0xfe11 has been reserved
system 00:06: ioport range 0xfe00-0xfe00 has been reserved
system 00:06: ioport range 0x4000-0x407f has been reserved
system 00:06: ioport range 0x8100-0x811f could not be reserved
Time: tsc clocksource has been installed.
system 00:06: driver attached
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: 0xd1000000-0xd1ffffff
PREFETCH window: 0x00000000f0000000-0x00000000f3ffffff
PCI: Bus 2, cardbus bridge: 0000:00:0c.0
IO window: 0x00002000-0x000020ff
IO window: 0x00002400-0x000024ff
PREFETCH window: 0x50000000-0x53ffffff
MEM window: 0x54000000-0x57ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Enabling device 0000:00:0c.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:0c.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1204788516.711:1): initialized
highmem bounce pool size: 64 pages
io scheduler noop registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
pci 0000:01:00.0: Boot video device
isapnp: Scanning for PnP cards...

Quoted 8 lines

isapnp: No Plug & Play device found
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:11.1
ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug
ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 23
ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 23 (level, low) ->

IRQ 23

Quoted 21 lines

VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1

    ide0: BM-DMA at 0x1c60-0x1c67, BIOS settings: hda:DMA, hdb:PIO
    ide1: BM-DMA at 0x1c68-0x1c6f, BIOS settings: hdc:DMA, hdd:PIO

Probing IDE interface ide0...
Switched to high resolution mode on CPU 0
hdb: IRQ probe failed (0xfffffbfe)
hdb: IRQ probe failed (0xfffffbfe)
hda: SAMSUNG MP0804H, ATA DISK drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
Probing IDE interface ide1...
hdc: Optiarc DVD RW AD-7543A, ATAPI CD/DVD-ROM drive
hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
pnp: the driver 'ide' has been registered
hda: max request size: 512KiB
hda: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=16383/255/63
hda: cache flushes supported

Quoted 8 lines

hda: hda1 hda2 hda3
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block

18, max trans len 1024, max batch 900, max commit age 30, max trans age 30

Quoted 32 lines

ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 272k freed
Write protecting the kernel read-only data: 732k
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: ACPI0007:00 is registered as cooling_device0
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWB]
input: Sleep Button (CM) as /class/input/input2
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /class/input/input3
ACPI: Lid Switch [LID]
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THRM] (14 C)
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
Yenta: CardBus bridge found at 0000:00:0c.0 [1558:4702]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0c.0, mfunc 0x00001002, devctl 0x44 8139too Fast Ethernet driver 0.9.28
hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20
Yenta: ISA IRQ mask 0x0840, PCI irq 16
Socket status: 30000006
ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 19
eth0: RealTek RTL8139 at 0xf88fa000, 00:90:f5:3e:5a:ca, IRQ 19
eth0: Identified 8139 chip type 'RTL-8100B/8139D' Marking TSC unstable due to: possible TSC halt in C2.

Quoted 8 lines

Time: acpi_pm clocksource has been installed.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
input: PC Speaker as /class/input/input4
pnp: the driver 'parport_pc' has been registered
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 1

[PCSPP,TRISTATE,COMPAT,ECP,DMA]

Quoted 9 lines

Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.12ac
parport_pc 00:0a: driver attached
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug
ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21
ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKD] -> GSI 21 (level, low) ->

IRQ 21

Quoted 7 lines

uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: irq 21, io base 0x00001c00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKD] -> GSI 21 (level, low) ->

IRQ 21

Quoted 7 lines

uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.1: irq 21, io base 0x00001c20
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKD] -> GSI 21 (level, low) ->

IRQ 21

Quoted 10 lines

uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.2: irq 21, io base 0x00001c40
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
pnp: the driver 'serial' has been registered
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 00:09: driver attached
ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKD] -> GSI 21 (level, low) ->

IRQ 21

Quoted 7 lines

ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:10.3: irq 21, io mem 0xd0004400
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected

Quoted 8 lines

cs: IO port probe 0x100-0x4ff: clean.
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug
ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) ->

IRQ 22

Quoted 2 lines

PCI: Setting latency timer of device 0000:00:11.6 to 64
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) ->

IRQ 22

Quoted 7 lines

PCI: Setting latency timer of device 0000:00:11.5 to 64 Adding 1951888k swap on /dev/hda2. Priority:-1 extents:1 across:1951888k
pnp: the driver 'i8042 kbd' has been registered
i8042 kbd 00:08: driver attached
pnp: the driver 'i8042 aux' has been registered
i8042 aux 00:07: driver attached
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12

Quoted 8 lines

i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard as /class/input/input5
powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 2600+ processors (1 cpu

cores) (version 2.20.00)

Quoted 6 lines
powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0x6
powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x18
powernow-k8: ph2 null fid transition 0x8
input: PS/2 Mouse as /class/input/input6
input: AlpsPS/2 ALPS GlidePoint as /class/input/input7
mice: PS/2 mouse device common for all mice
Quoted 12 lines

Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized via 2.11.1 20070202 on minor 0
leds_clevo_mail: 'Clevo D410J' found
Registered led device: clevo::mail
ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state changed Please send acpidump to [email protected]
[20070126]
ReiserFS: hda1: found reiserfs format "3.6" with standard journal
ReiserFS: hda1: using ordered data mode
ReiserFS: hda1: journal params: device hda1, size 8192, journal first block

18, max trans len 1024, max batch 900, max commit age 30, max trans age 30

Quoted 26 lines

ReiserFS: hda1: checking transaction log (hda1)
ReiserFS: hda1: Using r5 hash to sort names
ip_tables: (C) 2000-2006 Netfilter Core Team
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
NET: Registered protocol family 10
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
Clocksource tsc unstable (delta = -282353088 ns)
eth0: no IPv6 routers present
warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) irq 16: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Not tainted 2.6.25-rc4 #1

 [<c0157227>] __report_bad_irq+0x27/0x90
 [<c01574c6>] note_interrupt+0x236/0x270
 [<c01568d3>] ? handle_IRQ_event+0x53/0x60
 [<c0157b6a>] handle_fasteoi_irq+0x7a/0xd0
 [<c0106174>] do_IRQ+0x44/0xa0
 [<c0104c66>] common_interrupt+0x2e/0x34
 [<c0301ac8>] ? _spin_unlock_irq+0x28/0x50
 [<c0118974>] finish_task_switch+0x54/0xc0
 [<c0118920>] ? finish_task_switch+0x0/0xc0
 [<c02ff326>] schedule+0x2b6/0x470
 [<f892fdae>] ? acpi_processor_idle+0x0/0x436 [processor]
 [<c0102b65>] cpu_idle+0xb5/0xd0
 [<c02fa66c>] rest_init+0x5c/0x60
 =======================
Quoted 4 lines

handlers:
[<f8915830>] (yenta_interrupt+0x0/0xe0 [yenta_socket]) [<f8aee3f0>] (via_driver_irq_handler+0x0/0x1c0 [via]) Disabling IRQ #16

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

reviewer
#6 lore raw

Please try this debug patch and attach the dmesg output. :)

Thanks,
rui

Quoted 654 lines

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Németh Márton
Sent: Friday, March 07, 2008 2:54 PM
To: Zhang, Rui
Cc: [email protected]; LKML
Subject: Re: AE_ERROR, ACPI thermal trip point state changed

Hi,

I downloaded pmtools from
http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/pmtools-20071
116.tar.bz2 and
compiled: it created exactly the same result what my currently installed acpidump Debian
package version 20071116-1. I think it is useless to send the same log again.

After I boot the "Please send acpidump to [email protected]" message is already
there. So when I first get the prompt I checked for this message in dmesg and executed
the given command. Here is my result:

# cat /proc/acpi/thermal_zone/*/*
0 - Active; 1 - Passive
<polling disabled>
state:                   ok
temperature:             42 C
critical (S5):           155 C
passive:                 84 C: tc1=2 tc2=5 tsp=0 devices=CPU0
active[0]:               70 C: devices=
# ls /proc/acpi/thermal_zone/*/*
/proc/acpi/thermal_zone/THRM/cooling_mode
/proc/acpi/thermal_zone/THRM/polling_frequency
/proc/acpi/thermal_zone/THRM/state
/proc/acpi/thermal_zone/THRM/temperature
/proc/acpi/thermal_zone/THRM/trip_points

Maybe this is related to http://bugzilla.kernel.org/show_bug.cgi?id=8544 ?

Márton Németh

Quoted 1 line · Rui

Please attach the result of "cat /proc/acpi/thermal_zone/*/*" after this

message is shown.

Quoted 26 lines

Thanks,
rui

Quoted 22 lines

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Zhang, Rui
Sent: Thursday, March 06, 2008 6:50 AM
To: Németh Márton
Cc: [email protected]; LKML
Subject: Re: AE_ERROR, ACPI thermal trip point state changed

hi, Márton,

Please re-send the acpidump using the latest pmtools at
http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/

thanks,
rui

Quoted 3 lines · Németh Márton

Hi,

in my dmesg the following lines appear with linux-2.6.25-rc4 on Clevo D410J

laptop:

Quoted 1 line

ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state

changed

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

Please send acpidump to [email protected]
[20070126]

Should I do something else than sending the acpidump?

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines

Márton Németh

Quoted 3 lines · Németh Márton

Hi,

I get the following message from the kernel 2.6.25-rc1 on Clevo D410J

laptop:

Quoted 87 lines
Quoted 87 lines
Quoted 2 lines
Quoted 2 lines

ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state

changed

Quoted 8 lines
Quoted 6 lines

Please send acpidump to [email protected]
[20070126]

So I am writing this email to you.

Márton Németh

plain text document attachment (dmesg-2.6.25-rc4.txt) Linux version 2.6.25-rc4 (nmarci@europa) (gcc version 4.2.3 20080114

(prerelease) (Debian 4.2.2-7)) #1 PREEMPT Wed Mar 5 21:34:08 CET 2008

Quoted 75 lines

BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003bf70000 (usable)
BIOS-e820: 000000003bf70000 - 000000003bf7a000 (ACPI data)
BIOS-e820: 000000003bf7a000 - 000000003bf80000 (ACPI NVS)
BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
63MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f6870] 000f6870
Entering add_active_range(0, 0, 245616) 0 entries of 256 used Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 245616
Movable zone start PFN for each node early_node_map[1] active PFN ranges

    0:        0 ->   245616

On node 0 totalpages: 245616
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 126 pages used for memmap
HighMem zone: 16114 pages, LIFO batch:3
Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F68D0, 0014 (r0 PTLTD )
ACPI: RSDT 3BF7600B, 0030 (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 3BF79E87, 0074 (r1 AMDK8 PTLTW 6040000 PTL_ F4240)
ACPI: DSDT 3BF7603B, 3E4C (r1 VIA PTL_ACPI 6040000 MSFT 100000E)
ACPI: FACS 3BF7AFC0, 0040
ACPI: SSDT 3BF79EFB, 00B5 (r1 PTLTD POWERNOW 6040000 LTP 1)
ACPI: APIC 3BF79FB0, 0050 (r1 PTLTD APIC 6040000 LTP 0)
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:12 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ10 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bffe0000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d8000
PM: Registered nosave memory: 00000000000d8000 - 0000000000100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243698 Kernel command line: root=/dev/hda3 ro log_buf_len=1M resume=/dev/hda2
log_buf_len: 1048576
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1603.695 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 2048
... CLASSHASH_SIZE: 1024
... MAX_LOCKDEP_ENTRIES: 8192

Quoted 8 lines
Quoted 8 lines
Quoted 7 lines

... MAX_LOCKDEP_CHAINS: 16384
... CHAINHASH_SIZE: 8192
memory used by lock dependency info: 992 kB
per task-struct memory footprint: 1920 bytes
------------------------
| Locking API testsuite:

---------------------------------------------------------------------------

Quoted 4 lines
Quoted 4 lines

-

Quoted 1 line

| spin |wlock |rlock |mutex | wsem | rsem

|

--------------------------------------------------------------------------

Quoted 1 line
Quoted 1 line
Quoted 1 line

A-A deadlock: ok | ok | ok | ok | ok |

ok

Quoted 2 lines
Quoted 2 lines

|

Quoted 1 line

A-B-B-A deadlock: ok | ok | ok | ok | ok |

ok

Quoted 2 lines
Quoted 2 lines

|

Quoted 1 line

A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok |

ok

Quoted 2 lines
Quoted 2 lines

|

Quoted 1 line

A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok |

ok

Quoted 2 lines
Quoted 2 lines

|

Quoted 1 line

A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok |

ok

Quoted 2 lines
Quoted 2 lines

|

Quoted 1 line

A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok |

ok

Quoted 2 lines
Quoted 2 lines

|

Quoted 1 line

A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok |

ok

Quoted 2 lines
Quoted 2 lines

|

Quoted 1 line

double unlock: ok | ok | ok | ok | ok |

ok

Quoted 2 lines
Quoted 2 lines

|

Quoted 1 line

initialize held: ok | ok | ok | ok | ok |

ok

Quoted 2 lines
Quoted 2 lines

|

Quoted 1 line

bad unlock order: ok | ok | ok | ok | ok |

ok

Quoted 2 lines
Quoted 2 lines

|

--------------------------------------------------------------------------

Quoted 1 line
Quoted 1 line
Quoted 1 line

recursive read-lock: | ok | |

ok

Quoted 2 lines
Quoted 2 lines

|

Quoted 1 line

recursive read-lock #2: | ok | |

ok

Quoted 2 lines
Quoted 2 lines

|

Quoted 1 line

mixed read-write-lock: | ok | |

ok

Quoted 2 lines
Quoted 2 lines

|

Quoted 1 line

mixed write-read-lock: | ok | |

ok

Quoted 2 lines
Quoted 2 lines

|

--------------------------------------------------------------------------

Quoted 77 lines
Quoted 77 lines
Quoted 58 lines
     hard-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
     soft-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
     hard-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
     soft-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
       sirq-safe-A => hirqs-on/12:  ok  |  ok  |  ok  |
       sirq-safe-A => hirqs-on/21:  ok  |  ok  |  ok  |
         hard-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
         soft-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
         hard-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
         soft-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/123:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/123:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/132:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/132:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/213:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/213:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/231:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/231:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/312:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/312:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/321:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/321:  ok  |  ok  |  ok  |
      hard-irq read-recursion/123:  ok  |
      soft-irq read-recursion/123:  ok  |
      hard-irq read-recursion/132:  ok  |
      soft-irq read-recursion/132:  ok  |
      hard-irq read-recursion/213:  ok  |
      soft-irq read-recursion/213:  ok  |
      hard-irq read-recursion/231:  ok  |
      soft-irq read-recursion/231:  ok  |
      hard-irq read-recursion/312:  ok  |
      soft-irq read-recursion/312:  ok  |
      hard-irq read-recursion/321:  ok  |
      soft-irq read-recursion/321:  ok  |
Quoted 6 lines

-------------------------------------------------------
Good, all 218 testcases passed! |
---------------------------------
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 966876k/982464k available (2071k kernel code, 15072k reserved, 891k

data, 272k init, 64960k highmem)

Quoted 11 lines

virtual kernel memory layout:

    fixmap  : 0xfffa8000 - 0xfffff000   ( 348 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc03e8000 - 0xc042c000   ( 272 kB)
      .data : 0xc0305c2b - 0xc03e4c18   ( 891 kB)
      .text : 0xc0100000 - 0xc0305c2b   (2071 kB)

Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated Calibrating delay using timer specific routine.. 3210.53 BogoMIPS

(lpj=1605269)

Quoted 15 lines
Quoted 7 lines
Quoted 7 lines

Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 128K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
CPU: AMD Mobile AMD Sempron(tm) Processor 2600+ stepping 00

Quoted 8 lines
Quoted 8 lines

Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 480 Objects with 49 Devices 147 Methods 13 Regions Parsing all Control Methods:
Table [SSDT](id 0002) - 3 Objects with 0 Devices 0 Methods 0 Regions
tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully

acquired

Quoted 1 line
Quoted 1 line
Quoted 1 line

evxfevnt-0091 [00] enable : Transition to ACPI mode

successful

Quoted 10 lines
Quoted 10 lines
Quoted 10 lines

ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
net_namespace: 604 bytes
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd88c, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on

int

Quoted 7 lines
Quoted 7 lines

0xA

Quoted 1 line

evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0 Runtime

GPEs in this block

Quoted 2 lines

ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package

initialization:.....................................................

Quoted 1 line

Initialized 11/13 Regions 1/1 Fields 23/24 Buffers 18/26 Packages (492

nodes)

Quoted 22 lines
Quoted 22 lines
Quoted 22 lines

Initializing Device/Processor/Thermal objects by executing _INI methods:. Executed 1 _INI methods requiring 1 _STA executions (examined 53 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: missing write data confirmation, don't expect it any longer.
ACPI: EC: GPE = 0xb, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM pci 0000:00:11.0: quirk: region 8100-810f claimed by vt8235 SMB
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *11, disabled.
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *10, disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *5, disabled.
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
00:05: calling quirk 0xc025ae70:

quirk_supermicro_h8dce_system+0x0/0x110()

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

pnp 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
00:06: calling quirk 0xc025ae70:

quirk_supermicro_h8dce_system+0x0/0x110()

Quoted 9 lines
Quoted 9 lines
Quoted 9 lines

pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active) pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a

report

Quoted 42 lines
Quoted 42 lines
Quoted 42 lines

pnp: the driver 'system' has been registered
system 00:05: iomem range 0x0-0x9ffff could not be reserved system 00:05: iomem range 0xe0000-0xfffff could not be reserved system 00:05: iomem range 0xfff00000-0xffffffff could not be reserved system 00:05: iomem range 0xffee0000-0xffefffff has been reserved system 00:05: iomem range 0xfec00000-0xfec00fff has been reserved system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved system 00:05: driver attached
system 00:06: ioport range 0x4d0-0x4d1 has been reserved system 00:06: ioport range 0xfe10-0xfe11 has been reserved system 00:06: ioport range 0xfe00-0xfe00 has been reserved system 00:06: ioport range 0x4000-0x407f has been reserved system 00:06: ioport range 0x8100-0x811f could not be reserved
Time: tsc clocksource has been installed.
system 00:06: driver attached
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: 0xd1000000-0xd1ffffff
PREFETCH window: 0x00000000f0000000-0x00000000f3ffffff
PCI: Bus 2, cardbus bridge: 0000:00:0c.0
IO window: 0x00002000-0x000020ff
IO window: 0x00002400-0x000024ff
PREFETCH window: 0x50000000-0x53ffffff
MEM window: 0x54000000-0x57ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Enabling device 0000:00:0c.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:0c.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1204788516.711:1): initialized
highmem bounce pool size: 64 pages
io scheduler noop registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
pci 0000:01:00.0: Boot video device
isapnp: Scanning for PnP cards...

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

isapnp: No Plug & Play device found
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:11.1
ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug
ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 23
ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 23 (level, low)

->

Quoted 72 lines
Quoted 72 lines

IRQ 23

Quoted 21 lines

VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1

    ide0: BM-DMA at 0x1c60-0x1c67, BIOS settings: hda:DMA, hdb:PIO
    ide1: BM-DMA at 0x1c68-0x1c6f, BIOS settings: hdc:DMA, hdd:PIO

Probing IDE interface ide0...
Switched to high resolution mode on CPU 0
hdb: IRQ probe failed (0xfffffbfe)
hdb: IRQ probe failed (0xfffffbfe)
hda: SAMSUNG MP0804H, ATA DISK drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
Probing IDE interface ide1...
hdc: Optiarc DVD RW AD-7543A, ATAPI CD/DVD-ROM drive
hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
pnp: the driver 'ide' has been registered
hda: max request size: 512KiB
hda: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=16383/255/63
hda: cache flushes supported

Quoted 8 lines

hda: hda1 hda2 hda3
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block

18, max trans len 1024, max batch 900, max commit age 30, max trans age 30

Quoted 32 lines

ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 272k freed
Write protecting the kernel read-only data: 732k
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: ACPI0007:00 is registered as cooling_device0
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWB]
input: Sleep Button (CM) as /class/input/input2
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /class/input/input3
ACPI: Lid Switch [LID]
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THRM] (14 C)
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
Yenta: CardBus bridge found at 0000:00:0c.0 [1558:4702]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0c.0, mfunc 0x00001002, devctl 0x44 8139too Fast Ethernet driver 0.9.28
hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20
Yenta: ISA IRQ mask 0x0840, PCI irq 16
Socket status: 30000006
ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 19
eth0: RealTek RTL8139 at 0xf88fa000, 00:90:f5:3e:5a:ca, IRQ 19
eth0: Identified 8139 chip type 'RTL-8100B/8139D' Marking TSC unstable due to: possible TSC halt in C2.

Quoted 8 lines

Time: acpi_pm clocksource has been installed.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
input: PC Speaker as /class/input/input4
pnp: the driver 'parport_pc' has been registered
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 1

[PCSPP,TRISTATE,COMPAT,ECP,DMA]

Quoted 9 lines
Quoted 9 lines
Quoted 9 lines

Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.12ac
parport_pc 00:0a: driver attached
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug
ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21
ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKD] -> GSI 21 (level, low)

->

Quoted 8 lines
Quoted 8 lines

IRQ 21

Quoted 7 lines

uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: irq 21, io base 0x00001c00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKD] -> GSI 21 (level, low)

->

Quoted 8 lines
Quoted 8 lines

IRQ 21

Quoted 7 lines

uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.1: irq 21, io base 0x00001c20
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKD] -> GSI 21 (level, low)

->

Quoted 11 lines
Quoted 11 lines

IRQ 21

Quoted 10 lines

uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.2: irq 21, io base 0x00001c40
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
pnp: the driver 'serial' has been registered
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 00:09: driver attached
ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKD] -> GSI 21 (level, low)

->

Quoted 16 lines
Quoted 16 lines

IRQ 21

Quoted 15 lines

ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:10.3: irq 21, io mem 0xd0004400
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
cs: IO port probe 0x100-0x4ff: clean.
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug
ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low)

->

Quoted 3 lines
Quoted 3 lines

IRQ 22

Quoted 2 lines

PCI: Setting latency timer of device 0000:00:11.6 to 64
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low)

->

Quoted 16 lines
Quoted 16 lines

IRQ 22

Quoted 15 lines

PCI: Setting latency timer of device 0000:00:11.5 to 64 Adding 1951888k swap on /dev/hda2. Priority:-1 extents:1 across:1951888k
pnp: the driver 'i8042 kbd' has been registered
i8042 kbd 00:08: driver attached
pnp: the driver 'i8042 aux' has been registered
i8042 aux 00:07: driver attached
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard as /class/input/input5
powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 2600+ processors (1

cpu

Quoted 14 lines
Quoted 14 lines

cores) (version 2.20.00)

Quoted 13 lines
powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0x6
powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x18
powernow-k8: ph2 null fid transition 0x8
input: PS/2 Mouse as /class/input/input6
input: AlpsPS/2 ALPS GlidePoint as /class/input/input7
mice: PS/2 mouse device common for all mice

Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized via 2.11.1 20070202 on minor 0
leds_clevo_mail: 'Clevo D410J' found
Registered led device: clevo::mail
ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state

changed

Quoted 36 lines
Quoted 36 lines
Quoted 5 lines

Please send acpidump to [email protected]
[20070126]
ReiserFS: hda1: found reiserfs format "3.6" with standard journal
ReiserFS: hda1: using ordered data mode
ReiserFS: hda1: journal params: device hda1, size 8192, journal first block

18, max trans len 1024, max batch 900, max commit age 30, max trans age 30

Quoted 30 lines

ReiserFS: hda1: checking transaction log (hda1)
ReiserFS: hda1: Using r5 hash to sort names
ip_tables: (C) 2000-2006 Netfilter Core Team
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
NET: Registered protocol family 10
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
Clocksource tsc unstable (delta = -282353088 ns)
eth0: no IPv6 routers present
warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) irq 16: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Not tainted 2.6.25-rc4 #1

 [<c0157227>] __report_bad_irq+0x27/0x90
 [<c01574c6>] note_interrupt+0x236/0x270
 [<c01568d3>] ? handle_IRQ_event+0x53/0x60
 [<c0157b6a>] handle_fasteoi_irq+0x7a/0xd0
 [<c0106174>] do_IRQ+0x44/0xa0
 [<c0104c66>] common_interrupt+0x2e/0x34
 [<c0301ac8>] ? _spin_unlock_irq+0x28/0x50
 [<c0118974>] finish_task_switch+0x54/0xc0
 [<c0118920>] ? finish_task_switch+0x0/0xc0
 [<c02ff326>] schedule+0x2b6/0x470
 [<f892fdae>] ? acpi_processor_idle+0x0/0x436 [processor]
 [<c0102b65>] cpu_idle+0xb5/0xd0
 [<c02fa66c>] rest_init+0x5c/0x60
 =======================

handlers:
[<f8915830>] (yenta_interrupt+0x0/0xe0 [yenta_socket]) [<f8aee3f0>] (via_driver_irq_handler+0x0/0x1c0 [via]) Disabling IRQ #16

Quoted 6 lines
Quoted 4 lines

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

reviewer
#7 lore raw
In reply to Németh Márton
Quoted 30 lines · Németh Márton

Hi,

I downloaded pmtools from
http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/pmtools-20071116.tar.bz2 and
compiled: it created exactly the same result what my currently
installed acpidump Debian
package version 20071116-1. I think it is useless to send the same log again.

After I boot the "Please send acpidump to [email protected]" message is already
there. So when I first get the prompt I checked for this message in dmesg and executed
the given command. Here is my result:

# cat /proc/acpi/thermal_zone/*/*
0 - Active; 1 - Passive
<polling disabled>
state:                   ok
temperature:             42 C
critical (S5):           155 C
passive:                 84 C: tc1=2 tc2=5 tsp=0 devices=CPU0
active[0]:               70 C: devices=
# ls /proc/acpi/thermal_zone/*/*
/proc/acpi/thermal_zone/THRM/cooling_mode
/proc/acpi/thermal_zone/THRM/polling_frequency
/proc/acpi/thermal_zone/THRM/state
/proc/acpi/thermal_zone/THRM/temperature
/proc/acpi/thermal_zone/THRM/trip_points
Quoted 3 lines

Maybe this is related to
http://bugzilla.kernel.org/show_bug.cgi?id=8544 ?

Hi, Németh,

Please ignore the debug patch I sent and try this one.

thanks,
rui

thermal fixup for broken BIOS

Signed-off-by Zhang Rui<[email protected]>
---
 drivers/acpi/thermal.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/acpi/thermal.c +3 -1
Index: linux-2.6/drivers/acpi/thermal.c
===================================================================
@@ -326,7 +326,9 @@ static int acpi_thermal_set_cooling_mode
 #define ACPI_TRIPS_ACTIVE	0x08
 #define ACPI_TRIPS_DEVICES	0x10
 
-#define ACPI_TRIPS_REFRESH_THRESHOLDS	(ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE)
+#define ACPI_TRIPS_REFRESH_THRESHOLDS	(ACPI_TRIPS_PASSIVE |	\
+					 ACPI_TRIPS_ACTIVE |	\
+					 ACPI_TRIPS_DEVICES)
 #define ACPI_TRIPS_REFRESH_DEVICES	ACPI_TRIPS_DEVICES
 
 #define ACPI_TRIPS_INIT      (ACPI_TRIPS_CRITICAL | ACPI_TRIPS_HOT |	\

thermal fixup for broken BIOS

Signed-off-by Zhang Rui<[email protected]>
---
 drivers/acpi/thermal.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/acpi/thermal.c +3 -1
Index: linux-2.6/drivers/acpi/thermal.c
===================================================================
@@ -326,7 +326,9 @@ static int acpi_thermal_set_cooling_mode
 #define ACPI_TRIPS_ACTIVE	0x08
 #define ACPI_TRIPS_DEVICES	0x10
 
-#define ACPI_TRIPS_REFRESH_THRESHOLDS	(ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE)
+#define ACPI_TRIPS_REFRESH_THRESHOLDS	(ACPI_TRIPS_PASSIVE |	\
+					 ACPI_TRIPS_ACTIVE |	\
+					 ACPI_TRIPS_DEVICES)
 #define ACPI_TRIPS_REFRESH_DEVICES	ACPI_TRIPS_DEVICES
 
 #define ACPI_TRIPS_INIT      (ACPI_TRIPS_CRITICAL | ACPI_TRIPS_HOT |	\
author
#8 lore raw
Quoted 31 lines · Rui
Quoted 30 lines · Németh Márton

Hi,

I downloaded pmtools from
http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/pmtools-20071116.tar.bz2 and
compiled: it created exactly the same result what my currently
installed acpidump Debian
package version 20071116-1. I think it is useless to send the same log again.

After I boot the "Please send acpidump to [email protected]" message is already
there. So when I first get the prompt I checked for this message in dmesg and executed
the given command. Here is my result:

# cat /proc/acpi/thermal_zone/*/*
0 - Active; 1 - Passive
<polling disabled>
state:                   ok
temperature:             42 C
critical (S5):           155 C
passive:                 84 C: tc1=2 tc2=5 tsp=0 devices=CPU0
active[0]:               70 C: devices=
# ls /proc/acpi/thermal_zone/*/*
/proc/acpi/thermal_zone/THRM/cooling_mode
/proc/acpi/thermal_zone/THRM/polling_frequency
/proc/acpi/thermal_zone/THRM/state
/proc/acpi/thermal_zone/THRM/temperature
/proc/acpi/thermal_zone/THRM/trip_points
Quoted 6 lines
Quoted 3 lines

Maybe this is related to
http://bugzilla.kernel.org/show_bug.cgi?id=8544 ?

Hi, Németh,

Please ignore the debug patch I sent and try this one.

I created both the dmesg logs:

1. Clevo-D410J-patch-debug-thermal2.txt: the patch-debug-thermal was only applied, (and added a missing "\n").

2. Clevo-D410J-thermal-fix.txt: the thermal-fix patch was also applied. In this case the AE_ERROR message is not there any more on Clevo D410J laptop.

Regards,

Márton Németh

[    0.000000] Linux version 2.6.25-rc4 (nmarci@europa) (gcc version 4.2.3 20080114 (prerelease) (Debian 4.2.2-7)) #6 PREEMPT Sat Mar 8 08:11:47 CET 2008
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003bf70000 (usable)
[    0.000000]  BIOS-e820: 000000003bf70000 - 000000003bf7a000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003bf7a000 - 000000003bf80000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
[    0.000000] 63MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] Scan SMP from c0000000 for 1024 bytes.
[    0.000000] Scan SMP from c009fc00 for 1024 bytes.
[    0.000000] Scan SMP from c00f0000 for 65536 bytes.
[    0.000000] found SMP MP-table at [c00f6870] 000f6870
[    0.000000] Entering add_active_range(0, 0, 245616) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   245616
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   245616
[    0.000000] On node 0 totalpages: 245616
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 126 pages used for memmap
[    0.000000]   HighMem zone: 16114 pages, LIFO batch:3
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000F68D0, 0014 (r0 PTLTD )
[    0.000000] ACPI: RSDT 3BF7600B, 0030 (r1 PTLTD    RSDT    6040000  LTP        0)
[    0.000000] ACPI: FACP 3BF79E87, 0074 (r1 AMDK8  PTLTW     6040000 PTL_    F4240)
[    0.000000] ACPI: DSDT 3BF7603B, 3E4C (r1  VIA   PTL_ACPI  6040000 MSFT  100000E)
[    0.000000] ACPI: FACS 3BF7AFC0, 0040
[    0.000000] ACPI: SSDT 3BF79EFB, 00B5 (r1 PTLTD  POWERNOW  6040000  LTP        1)
[    0.000000] ACPI: APIC 3BF79FB0, 0050 (r1 PTLTD  	 APIC    6040000  LTP        0)
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:12 APIC version 16
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bffe0000)
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d8000
[    0.000000] PM: Registered nosave memory: 00000000000d8000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 243698
[    0.000000] Kernel command line: root=/dev/hda3 ro log_buf_len=1M resume=/dev/hda2
[    0.000000] log_buf_len: 1048576
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1603.642 MHz processor.
[    0.000999] Console: colour VGA+ 80x25
[    0.000999] console [tty0] enabled
[    0.000999] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000999] ... MAX_LOCKDEP_SUBCLASSES:    8
[    0.000999] ... MAX_LOCK_DEPTH:          48
[    0.000999] ... MAX_LOCKDEP_KEYS:        2048
[    0.000999] ... CLASSHASH_SIZE:           1024
[    0.000999] ... MAX_LOCKDEP_ENTRIES:     8192
[    0.000999] ... MAX_LOCKDEP_CHAINS:      16384
[    0.000999] ... CHAINHASH_SIZE:          8192
[    0.000999]  memory used by lock dependency info: 992 kB
[    0.000999]  per task-struct memory footprint: 1920 bytes
[    0.000999] ------------------------
[    0.000999] | Locking API testsuite:
[    0.000999] ----------------------------------------------------------------------------
[    0.000999]                                  | spin |wlock |rlock |mutex | wsem | rsem |
[    0.000999]   --------------------------------------------------------------------------
[    0.000999]                      A-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]                  A-B-B-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]              A-B-B-C-C-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]              A-B-C-A-B-C deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]          A-B-B-C-C-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]          A-B-C-D-B-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]          A-B-C-D-B-C-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]                     double unlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]                   initialize held:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]                  bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]   --------------------------------------------------------------------------
[    0.000999]               recursive read-lock:             |  ok  |             |  ok  |
[    0.000999]            recursive read-lock #2:             |  ok  |             |  ok  |
[    0.000999]             mixed read-write-lock:             |  ok  |             |  ok  |
[    0.000999]             mixed write-read-lock:             |  ok  |             |  ok  |
[    0.000999]   --------------------------------------------------------------------------
[    0.000999]      hard-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
[    0.000999]      soft-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
[    0.000999]      hard-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
[    0.000999]      soft-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
[    0.000999]        sirq-safe-A => hirqs-on/12:  ok  |  ok  |  ok  |
[    0.000999]        sirq-safe-A => hirqs-on/21:  ok  |  ok  |  ok  |
[    0.000999]          hard-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
[    0.000999]          soft-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
[    0.000999]          hard-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
[    0.000999]          soft-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
[    0.000999]       hard-irq lock-inversion/123:  ok  |  ok  |  ok  |
[    0.000999]       soft-irq lock-inversion/123:  ok  |  ok  |  ok  |
[    0.000999]       hard-irq lock-inversion/132:  ok  |  ok  |  ok  |
[    0.000999]       soft-irq lock-inversion/132:  ok  |  ok  |  ok  |
[    0.000999]       hard-irq lock-inversion/213:  ok  |  ok  |  ok  |
[    0.000999]       soft-irq lock-inversion/213:  ok  |  ok  |  ok  |
[    0.000999]       hard-irq lock-inversion/231:  ok  |  ok  |  ok  |
[    0.000999]       soft-irq lock-inversion/231:  ok  |  ok  |  ok  |
[    0.000999]       hard-irq lock-inversion/312:  ok  |  ok  |  ok  |
[    0.000999]       soft-irq lock-inversion/312:  ok  |  ok  |  ok  |
[    0.000999]       hard-irq lock-inversion/321:  ok  |  ok  |  ok  |
[    0.000999]       soft-irq lock-inversion/321:  ok  |  ok  |  ok  |
[    0.000999]       hard-irq read-recursion/123:  ok  |
[    0.000999]       soft-irq read-recursion/123:  ok  |
[    0.000999]       hard-irq read-recursion/132:  ok  |
[    0.000999]       soft-irq read-recursion/132:  ok  |
[    0.000999]       hard-irq read-recursion/213:  ok  |
[    0.000999]       soft-irq read-recursion/213:  ok  |
[    0.000999]       hard-irq read-recursion/231:  ok  |
[    0.000999]       soft-irq read-recursion/231:  ok  |
[    0.000999]       hard-irq read-recursion/312:  ok  |
[    0.000999]       soft-irq read-recursion/312:  ok  |
[    0.000999]       hard-irq read-recursion/321:  ok  |
[    0.000999]       soft-irq read-recursion/321:  ok  |
[    0.000999] -------------------------------------------------------
[    0.000999] Good, all 218 testcases passed! |
[    0.000999] ---------------------------------
[    0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000999] Memory: 966876k/982464k available (2073k kernel code, 15072k reserved, 889k data, 272k init, 64960k highmem)
[    0.000999] virtual kernel memory layout:
[    0.000999]     fixmap  : 0xfffa8000 - 0xfffff000   ( 348 kB)
[    0.000999]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000999]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[    0.000999]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[    0.000999]       .init : 0xc03e8000 - 0xc042c000   ( 272 kB)
[    0.000999]       .data : 0xc030654b - 0xc03e4c18   ( 889 kB)
[    0.000999]       .text : 0xc0100000 - 0xc030654b   (2073 kB)
[    0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000999] CPA: page pool initialized 1 of 1 pages preallocated
[    0.060995] Calibrating delay using timer specific routine.. 3210.58 BogoMIPS (lpj=1605290)
[    0.061255] Mount-cache hash table entries: 512
[    0.062190] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.062995] CPU: L2 Cache: 128K (64 bytes/line)
[    0.063051] Intel machine check architecture supported.
[    0.063108] Intel machine check reporting enabled on CPU#0.
[    0.063171] Compat vDSO mapped to ffffe000.
[    0.063231] CPU: AMD Mobile AMD Sempron(tm) Processor 2600+ stepping 00
[    0.063407] Checking 'hlt' instruction... OK.
[    0.067334] Freeing SMP alternatives: 0k freed
[    0.067389] ACPI: Core revision 20070126
[    0.075700] Parsing all Control Methods:
[    0.075829] Table [DSDT](id 0001) - 480 Objects with 49 Devices 147 Methods 13 Regions
[    0.076045] Parsing all Control Methods:
[    0.076167] Table [SSDT](id 0002) - 3 Objects with 0 Devices 0 Methods 0 Regions
[    0.076282]  tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
[    0.077049] evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
[    0.078951] ENABLING IO-APIC IRQs
[    0.078988] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[    0.088986] net_namespace: 604 bytes
[    0.089542] NET: Registered protocol family 16
[    0.090468] EISA bus registered
[    0.090552] ACPI: bus type pci registered
[    0.098184] PCI: PCI BIOS revision 2.10 entry at 0xfd88c, last bus=1
[    0.098246] PCI: Using configuration type 1
[    0.098301] Setting up standard PCI resources
[    0.102693] evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 0F [_GPE] 2 regs on int 0xA
[    0.103507] evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0 Runtime GPEs in this block
[    0.103662] ACPI: EC: Look up EC in DSDT
[    0.105968] Completing Region/Field/Buffer/Package initialization:.....................................................
[    0.112059] Initialized 11/13 Regions 1/1 Fields 23/24 Buffers 18/26 Packages (492 nodes)
[    0.112176] Initializing Device/Processor/Thermal objects by executing _INI methods:.
[    0.112520] Executed 1 _INI methods requiring 1 _STA executions (examined 53 objects)
[    0.112710] ACPI: Interpreter enabled
[    0.112765] ACPI: (supports S0 S3 S4 S5)
[    0.113073] ACPI: Using IOAPIC for interrupt routing
[    0.124960] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.141100] ACPI: EC: GPE = 0xb, I/O: command/status = 0x66, data = 0x62
[    0.141163] ACPI: EC: driver started in interrupt mode
[    0.141406] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.142668] pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM
[    0.142730] pci 0000:00:11.0: quirk: region 8100-810f claimed by vt8235 SMB
[    0.143303] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.163710] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled.
[    0.164421] ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *11, disabled.
[    0.165135] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *10, disabled.
[    0.165538] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *5, disabled.
[    0.166042] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 12 14 15)
[    0.166735] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 12 14 15) *11
[    0.167461] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 11 12 14 15) *10
[    0.168174] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    0.169139] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.169323] pnp: PnP ACPI init
[    0.169421] ACPI: bus type pnp registered
[    0.171596] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.172380] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.172644] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.172904] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.173225] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.173355]  00:05: calling quirk 0xc025ae70: quirk_supermicro_h8dce_system+0x0/0x110()
[    0.173531] pnp 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.173827]  00:06: calling quirk 0xc025ae70: quirk_supermicro_h8dce_system+0x0/0x110()
[    0.174030] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.174292] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.174537] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.175664] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.176873] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.677904] ACPI: EC: missing write data confirmation, don't expect it any longer.
[    0.677904] pnp: PnP ACPI: found 11 devices
[    0.677904] ACPI: ACPI bus type pnp unregistered
[    0.678131] PCI: Using ACPI for IRQ routing
[    0.678191] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    0.682723] pnp: the driver 'system' has been registered
[    0.682758] system 00:05: iomem range 0x0-0x9ffff could not be reserved
[    0.682821] system 00:05: iomem range 0xe0000-0xfffff could not be reserved
[    0.682882] system 00:05: iomem range 0xfff00000-0xffffffff could not be reserved
[    0.682903] Time: tsc clocksource has been installed.
[    0.682911] system 00:05: iomem range 0xffee0000-0xffefffff has been reserved
[    0.682982] system 00:05: iomem range 0xfec00000-0xfec00fff has been reserved
[    0.683042] system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.683100] system 00:05: driver attached
[    0.683114] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[    0.683174] system 00:06: ioport range 0xfe10-0xfe11 has been reserved
[    0.683233] system 00:06: ioport range 0xfe00-0xfe00 has been reserved
[    0.683292] system 00:06: ioport range 0x4000-0x407f has been reserved
[    0.683351] system 00:06: ioport range 0x8100-0x811f could not be reserved
[    0.683410] system 00:06: driver attached
[    0.715412] PCI: Bridge: 0000:00:01.0
[    0.715472]   IO window: disabled.
[    0.715529]   MEM window: 0xd1000000-0xd1ffffff
[    0.715586]   PREFETCH window: 0x00000000f0000000-0x00000000f3ffffff
[    0.715649] PCI: Bus 2, cardbus bridge: 0000:00:0c.0
[    0.715704]   IO window: 0x00002000-0x000020ff
[    0.715761]   IO window: 0x00002400-0x000024ff
[    0.715818]   PREFETCH window: 0x50000000-0x53ffffff
[    0.715876]   MEM window: 0x54000000-0x57ffffff
[    0.715930] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    0.715944] PCI: Enabling device 0000:00:0c.0 (0000 -> 0003)
[    0.716013] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 16
[    0.716129] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[    0.716199] NET: Registered protocol family 2
[    0.716511] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.717330] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.718602] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
[    0.724795] TCP: Hash tables configured (established 131072 bind 65536)
[    0.724901] TCP reno registered
[    0.727749] audit: initializing netlink socket (disabled)
[    0.727861] type=2000 audit(1204964371.726:1): initialized
[    0.728288] highmem bounce pool size: 64 pages
[    0.729091] io scheduler noop registered
[    0.729166] io scheduler cfq registered (default)
[    0.729244] PCI: VIA PCI bridge detected. Disabling DAC.
[    0.729381] pci 0000:01:00.0: Boot video device
[    0.729790] isapnp: Scanning for PnP cards...
[    1.086836] isapnp: No Plug & Play device found
[    1.173786] Uniform Multi-Platform E-IDE driver
[    1.173917] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    1.174167] VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at  PCI slot 0000:00:11.1
[    1.174480] ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug
[    1.174645] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 23
[    1.174705] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 23
[    1.174769] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 23 (level, low) -> IRQ 23
[    1.174947] VP_IDE: not 100% native mode: will probe irqs later
[    1.175016] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[    1.175093]     ide0: BM-DMA at 0x1c60-0x1c67, BIOS settings: hda:DMA, hdb:PIO
[    1.175210]     ide1: BM-DMA at 0x1c68-0x1c6f, BIOS settings: hdc:DMA, hdd:PIO
[    1.175323] Probing IDE interface ide0...
[    1.215863] Switched to high resolution mode on CPU 0
[    1.714337] hdb: IRQ probe failed (0xfffffbfe)
[    1.988460] hdb: IRQ probe failed (0xfffffbfe)
[    2.415565] hda: SAMSUNG MP0804H, ATA DISK drive
[    2.415565] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[    2.415565] hda: UDMA/100 mode selected
[    2.415565] Probing IDE interface ide1...
[    3.819842] hdc: Optiarc DVD RW AD-7543A, ATAPI CD/DVD-ROM drive
[    3.819842] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[    3.819842] hdc: UDMA/33 mode selected
[    3.819842] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    3.915658] ide1 at 0x170-0x177,0x376 on irq 15
[    3.918118] pnp: the driver 'ide' has been registered
[    3.918312] hda: max request size: 512KiB
[    3.918460] hda: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=16383/255/63
[    3.919383] hda: cache flushes supported
[    3.919421]  hda: hda1 hda2 hda3
[    3.923633] TCP cubic registered
[    3.923717] NET: Registered protocol family 1
[    3.923797] NET: Registered protocol family 17
[    3.923877] Using IPI Shortcut mode
[    3.958646] ReiserFS: hda3: found reiserfs format "3.6" with standard journal
[    3.958646] ReiserFS: hda3: using ordered data mode
[    3.968162] ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[    3.969498] ReiserFS: hda3: checking transaction log (hda3)
[    4.050340] ReiserFS: hda3: Using r5 hash to sort names
[    4.050340] VFS: Mounted root (reiserfs filesystem) readonly.
[    4.050340] Freeing unused kernel memory: 272k freed
[    4.050340] Write protecting the kernel read-only data: 728k
[    9.247539] ACPI: CPU0 (power states: C1[C1] C2[C2])
[    9.247914] ACPI: ACPI0007:00 is registered as cooling_device0
[    9.261698] input: Power Button (FF) as /class/input/input0
[    9.264750] ACPI: Power Button (FF) [PWRF]
[    9.265023] input: Power Button (CM) as /class/input/input1
[    9.267742] ACPI: Power Button (CM) [PWB]
[    9.267989] input: Sleep Button (CM) as /class/input/input2
[    9.271693] ACPI: Sleep Button (CM) [SLPB]
[    9.271930] input: Lid Switch as /class/input/input3
[    9.272250] ACPI: Lid Switch [LID]
[    9.275160] ACPI thermal trips update, flag is 1f
[    9.275295] Checking invalid passive trip point...
[    9.275848] Checking invalid active[0] trip point...
[    9.276433] ACPI: LNXTHERM:01 is registered as thermal_zone0
[    9.276840] ACPI: Thermal Zone [THRM] (51 C)
[    9.283907] ACPI: AC Adapter [AC] (on-line)
[    9.298824] ACPI: Battery Slot [BAT0] (battery present)
[    9.779278] 8139too Fast Ethernet driver 0.9.28
[    9.779413] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 19
[    9.780486] eth0: RealTek RTL8139 at 0xf88e6000, 00:90:f5:3e:5a:ca, IRQ 19
[    9.780547] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[    9.926250] usbcore: registered new interface driver usbfs
[    9.926722] usbcore: registered new interface driver hub
[    9.932594] usbcore: registered new device driver usb
[    9.970145] Yenta: CardBus bridge found at 0000:00:0c.0 [1558:4702]
[    9.970231] Yenta: Using CSCINT to route CSC interrupts to PCI
[    9.970288] Yenta: Routing CardBus interrupts to PCI
[    9.970347] Yenta TI: socket 0000:00:0c.0, mfunc 0x00001002, devctl 0x44
[   10.082540] Marking TSC unstable due to: possible TSC halt in C2.
[   10.088159] Time: acpi_pm clocksource has been installed.
[   10.124294] Yenta: ISA IRQ mask 0x0888, PCI irq 16
[   10.124356] Socket status: 30000006
[   10.283070] Real Time Clock Driver v1.12ac
[   10.323892] pnp: the driver 'parport_pc' has been registered
[   10.323925] parport_pc 00:0a: reported by Plug and Play ACPI
[   10.324206] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   10.364197] input: PC Speaker as /class/input/input4
[   10.405891] parport_pc 00:0a: driver attached
[   10.664614] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[   10.665559] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   10.690614] pnp: the driver 'serial' has been registered
[   10.693403] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   10.693650] serial 00:09: driver attached
[   10.719440] USB Universal Host Controller Interface driver v3.0
[   10.719731] ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug
[   10.720129] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21
[   10.720189] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21
[   10.720253] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
[   10.720490] uhci_hcd 0000:00:10.0: UHCI Host Controller
[   10.729144] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[   10.729274] uhci_hcd 0000:00:10.0: irq 21, io base 0x00001c00
[   10.732056] usb usb1: configuration #1 chosen from 1 choice
[   10.734226] hub 1-0:1.0: USB hub found
[   10.734910] hub 1-0:1.0: 2 ports detected
[   10.822875] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[   10.823187] Uniform CD-ROM driver Revision: 3.20
[   10.835896] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
[   10.836091] uhci_hcd 0000:00:10.1: UHCI Host Controller
[   10.836526] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[   10.836630] uhci_hcd 0000:00:10.1: irq 21, io base 0x00001c20
[   10.837018] usb usb2: configuration #1 chosen from 1 choice
[   10.837526] hub 2-0:1.0: USB hub found
[   10.837599] hub 2-0:1.0: 2 ports detected
[   10.934718] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
[   10.934889] uhci_hcd 0000:00:10.2: UHCI Host Controller
[   10.935031] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[   10.935145] uhci_hcd 0000:00:10.2: irq 21, io base 0x00001c40
[   10.935575] usb usb3: configuration #1 chosen from 1 choice
[   10.935712] hub 3-0:1.0: USB hub found
[   10.935788] hub 3-0:1.0: 2 ports detected
[   11.036784] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
[   11.036964] ehci_hcd 0000:00:10.3: EHCI Host Controller
[   11.037107] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[   11.037253] ehci_hcd 0000:00:10.3: irq 21, io mem 0xd0004400
[   11.043452] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   11.043862] usb usb4: configuration #1 chosen from 1 choice
[   11.043994] hub 4-0:1.0: USB hub found
[   11.044427] hub 4-0:1.0: 6 ports detected
[   11.337448] cs: IO port probe 0x100-0x4ff: clean.
[   11.341653] cs: IO port probe 0x800-0x8ff: clean.
[   11.342764] cs: IO port probe 0xc00-0xcff: clean.
[   11.344099] cs: IO port probe 0xa00-0xaff: clean.
[   11.359967] ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug
[   11.360446] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[   11.360507] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[   11.360570] ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22
[   11.365193] PCI: Setting latency timer of device 0000:00:11.6 to 64
[   11.871190] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22
[   11.871492] PCI: Setting latency timer of device 0000:00:11.5 to 64
[   14.695432] Adding 1951888k swap on /dev/hda2.  Priority:-1 extents:1 across:1951888k
[   21.342637] ACPI thermal trips update, flag is c
[   21.342701] Checking valid passive trip point...
[   21.343243] Checking invalid active[0] trip point...
[   21.343342] ACPI Exception (thermal-0516): AE_ERROR, ACPI thermal trip point state changed
[   21.343390] Please send acpidump to [email protected]
[   21.343506]  [20070126]
[   21.343558] Checking invalid active[1] trip point...
[   24.736866] pnp: the driver 'i8042 kbd' has been registered
[   24.736921] i8042 kbd 00:08: driver attached
[   24.736963] pnp: the driver 'i8042 aux' has been registered
[   24.736990] i8042 aux 00:07: driver attached
[   24.737026] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   24.740242] i8042.c: Detected active multiplexing controller, rev 1.1.
[   24.741655] serio: i8042 KBD port at 0x60,0x64 irq 1
[   24.748167] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   24.748522] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   24.748580] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   24.748638] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   24.775180] input: AT Translated Set 2 keyboard as /class/input/input5
[   25.099613] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 2600+ processors (1 cpu cores) (version 2.20.00)
[   25.108125] powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0x6
[   25.108189] powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x18
[   25.117568] powernow-k8: ph2 null fid transition 0x8
[   25.245082] input: PS/2 Mouse as /class/input/input6
[   25.268164] input: AlpsPS/2 ALPS GlidePoint as /class/input/input7
[   25.380169] Linux agpgart interface v0.103
[   25.541038] [drm] Initialized drm 1.1.0 20060810
[   25.578665] mice: PS/2 mouse device common for all mice
[   25.656064] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   25.657015] [drm] Initialized via 2.11.1 20070202 on minor 0
[   25.708000] leds_clevo_mail: 'Clevo D410J' found
[   25.708413] Registered led device: clevo::mail
[   35.638131] ReiserFS: hda1: found reiserfs format "3.6" with standard journal
[   35.638225] ReiserFS: hda1: using ordered data mode
[   35.642542] ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   35.643662] ReiserFS: hda1: checking transaction log (hda1)
[   35.709971] ReiserFS: hda1: Using r5 hash to sort names
[   37.113001] ip_tables: (C) 2000-2006 Netfilter Core Team
[   37.415105] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[   39.082787] NET: Registered protocol family 10
[   45.236198] lp0: using parport0 (interrupt-driven).
[   45.259535] ppdev: user-space parallel port driver
[   46.464931] Clocksource tsc unstable (delta = -243617390 ns)
[   49.758986] eth0: no IPv6 routers present
[   52.960680] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[   65.452182] ACPI thermal trips update, flag is c
[   65.452198] Checking valid passive trip point...
[   65.453209] Checking valid active[0] trip point...
[   65.453296] Checking invalid active[1] trip point...
[  110.451483] ACPI thermal trips update, flag is c
[  110.451498] Checking valid passive trip point...
[  110.452470] Checking valid active[0] trip point...
[  110.452557] Checking invalid active[1] trip point...
[  112.384839] irq 16: nobody cared (try booting with the "irqpoll" option)
[  112.384839] Pid: 0, comm: swapper Not tainted 2.6.25-rc4 #6
[  112.384839]  [<c0157227>] __report_bad_irq+0x27/0x90
[  112.384839]  [<c01574c6>] note_interrupt+0x236/0x270
[  112.384839]  [<c01568d3>] ? handle_IRQ_event+0x53/0x60
[  112.384839]  [<c0157b6a>] handle_fasteoi_irq+0x7a/0xd0
[  112.384839]  [<c0106174>] do_IRQ+0x44/0xa0
[  112.384839]  [<c0104c66>] common_interrupt+0x2e/0x34
[  112.384839]  [<c03023e8>] ? _spin_unlock_irq+0x28/0x50
[  112.384839]  [<c0118974>] finish_task_switch+0x54/0xc0
[  112.384839]  [<c0118920>] ? finish_task_switch+0x0/0xc0
[  112.384839]  [<c02ffc46>] schedule+0x2b6/0x470
[  112.384839]  [<f892fdae>] ? acpi_processor_idle+0x0/0x436 [processor]
[  112.384839]  [<c0102b65>] cpu_idle+0xb5/0xd0
[  112.384839]  [<c02faf8c>] rest_init+0x5c/0x60
[  112.384839]  =======================
[  112.384839] handlers:
[  112.384839] [<f8918830>] (yenta_interrupt+0x0/0xe0 [yenta_socket])
[  112.384839] [<f8bf13f0>] (via_driver_irq_handler+0x0/0x1c0 [via])
[  112.384839] Disabling IRQ #16
[    0.000000] Linux version 2.6.25-rc4 (nmarci@europa) (gcc version 4.2.3 20080114 (prerelease) (Debian 4.2.2-7)) #7 PREEMPT Sat Mar 8 08:28:09 CET 2008
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003bf70000 (usable)
[    0.000000]  BIOS-e820: 000000003bf70000 - 000000003bf7a000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003bf7a000 - 000000003bf80000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
[    0.000000] 63MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] Scan SMP from c0000000 for 1024 bytes.
[    0.000000] Scan SMP from c009fc00 for 1024 bytes.
[    0.000000] Scan SMP from c00f0000 for 65536 bytes.
[    0.000000] found SMP MP-table at [c00f6870] 000f6870
[    0.000000] Entering add_active_range(0, 0, 245616) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   245616
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   245616
[    0.000000] On node 0 totalpages: 245616
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 126 pages used for memmap
[    0.000000]   HighMem zone: 16114 pages, LIFO batch:3
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000F68D0, 0014 (r0 PTLTD )
[    0.000000] ACPI: RSDT 3BF7600B, 0030 (r1 PTLTD    RSDT    6040000  LTP        0)
[    0.000000] ACPI: FACP 3BF79E87, 0074 (r1 AMDK8  PTLTW     6040000 PTL_    F4240)
[    0.000000] ACPI: DSDT 3BF7603B, 3E4C (r1  VIA   PTL_ACPI  6040000 MSFT  100000E)
[    0.000000] ACPI: FACS 3BF7AFC0, 0040
[    0.000000] ACPI: SSDT 3BF79EFB, 00B5 (r1 PTLTD  POWERNOW  6040000  LTP        1)
[    0.000000] ACPI: APIC 3BF79FB0, 0050 (r1 PTLTD  	 APIC    6040000  LTP        0)
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:12 APIC version 16
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bffe0000)
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d8000
[    0.000000] PM: Registered nosave memory: 00000000000d8000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 243698
[    0.000000] Kernel command line: root=/dev/hda3 ro log_buf_len=1M resume=/dev/hda2
[    0.000000] log_buf_len: 1048576
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1603.695 MHz processor.
[    0.000999] Console: colour VGA+ 80x25
[    0.000999] console [tty0] enabled
[    0.000999] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000999] ... MAX_LOCKDEP_SUBCLASSES:    8
[    0.000999] ... MAX_LOCK_DEPTH:          48
[    0.000999] ... MAX_LOCKDEP_KEYS:        2048
[    0.000999] ... CLASSHASH_SIZE:           1024
[    0.000999] ... MAX_LOCKDEP_ENTRIES:     8192
[    0.000999] ... MAX_LOCKDEP_CHAINS:      16384
[    0.000999] ... CHAINHASH_SIZE:          8192
[    0.000999]  memory used by lock dependency info: 992 kB
[    0.000999]  per task-struct memory footprint: 1920 bytes
[    0.000999] ------------------------
[    0.000999] | Locking API testsuite:
[    0.000999] ----------------------------------------------------------------------------
[    0.000999]                                  | spin |wlock |rlock |mutex | wsem | rsem |
[    0.000999]   --------------------------------------------------------------------------
[    0.000999]                      A-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]                  A-B-B-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]              A-B-B-C-C-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]              A-B-C-A-B-C deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]          A-B-B-C-C-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]          A-B-C-D-B-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]          A-B-C-D-B-C-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]                     double unlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]                   initialize held:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]                  bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]   --------------------------------------------------------------------------
[    0.000999]               recursive read-lock:             |  ok  |             |  ok  |
[    0.000999]            recursive read-lock #2:             |  ok  |             |  ok  |
[    0.000999]             mixed read-write-lock:             |  ok  |             |  ok  |
[    0.000999]             mixed write-read-lock:             |  ok  |             |  ok  |
[    0.000999]   --------------------------------------------------------------------------
[    0.000999]      hard-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
[    0.000999]      soft-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
[    0.000999]      hard-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
[    0.000999]      soft-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
[    0.000999]        sirq-safe-A => hirqs-on/12:  ok  |  ok  |  ok  |
[    0.000999]        sirq-safe-A => hirqs-on/21:  ok  |  ok  |  ok  |
[    0.000999]          hard-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
[    0.000999]          soft-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
[    0.000999]          hard-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
[    0.000999]          soft-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
[    0.000999]       hard-irq lock-inversion/123:  ok  |  ok  |  ok  |
[    0.000999]       soft-irq lock-inversion/123:  ok  |  ok  |  ok  |
[    0.000999]       hard-irq lock-inversion/132:  ok  |  ok  |  ok  |
[    0.000999]       soft-irq lock-inversion/132:  ok  |  ok  |  ok  |
[    0.000999]       hard-irq lock-inversion/213:  ok  |  ok  |  ok  |
[    0.000999]       soft-irq lock-inversion/213:  ok  |  ok  |  ok  |
[    0.000999]       hard-irq lock-inversion/231:  ok  |  ok  |  ok  |
[    0.000999]       soft-irq lock-inversion/231:  ok  |  ok  |  ok  |
[    0.000999]       hard-irq lock-inversion/312:  ok  |  ok  |  ok  |
[    0.000999]       soft-irq lock-inversion/312:  ok  |  ok  |  ok  |
[    0.000999]       hard-irq lock-inversion/321:  ok  |  ok  |  ok  |
[    0.000999]       soft-irq lock-inversion/321:  ok  |  ok  |  ok  |
[    0.000999]       hard-irq read-recursion/123:  ok  |
[    0.000999]       soft-irq read-recursion/123:  ok  |
[    0.000999]       hard-irq read-recursion/132:  ok  |
[    0.000999]       soft-irq read-recursion/132:  ok  |
[    0.000999]       hard-irq read-recursion/213:  ok  |
[    0.000999]       soft-irq read-recursion/213:  ok  |
[    0.000999]       hard-irq read-recursion/231:  ok  |
[    0.000999]       soft-irq read-recursion/231:  ok  |
[    0.000999]       hard-irq read-recursion/312:  ok  |
[    0.000999]       soft-irq read-recursion/312:  ok  |
[    0.000999]       hard-irq read-recursion/321:  ok  |
[    0.000999]       soft-irq read-recursion/321:  ok  |
[    0.000999] -------------------------------------------------------
[    0.000999] Good, all 218 testcases passed! |
[    0.000999] ---------------------------------
[    0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000999] Memory: 966876k/982464k available (2073k kernel code, 15072k reserved, 889k data, 272k init, 64960k highmem)
[    0.000999] virtual kernel memory layout:
[    0.000999]     fixmap  : 0xfffa8000 - 0xfffff000   ( 348 kB)
[    0.000999]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000999]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[    0.000999]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[    0.000999]       .init : 0xc03e8000 - 0xc042c000   ( 272 kB)
[    0.000999]       .data : 0xc030654b - 0xc03e4c18   ( 889 kB)
[    0.000999]       .text : 0xc0100000 - 0xc030654b   (2073 kB)
[    0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000999] CPA: page pool initialized 1 of 1 pages preallocated
[    0.060995] Calibrating delay using timer specific routine.. 3210.53 BogoMIPS (lpj=1605269)
[    0.061255] Mount-cache hash table entries: 512
[    0.062189] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.062995] CPU: L2 Cache: 128K (64 bytes/line)
[    0.063052] Intel machine check architecture supported.
[    0.063109] Intel machine check reporting enabled on CPU#0.
[    0.063172] Compat vDSO mapped to ffffe000.
[    0.063232] CPU: AMD Mobile AMD Sempron(tm) Processor 2600+ stepping 00
[    0.063408] Checking 'hlt' instruction... OK.
[    0.067332] Freeing SMP alternatives: 0k freed
[    0.067388] ACPI: Core revision 20070126
[    0.075699] Parsing all Control Methods:
[    0.075829] Table [DSDT](id 0001) - 480 Objects with 49 Devices 147 Methods 13 Regions
[    0.076041] Parsing all Control Methods:
[    0.076162] Table [SSDT](id 0002) - 3 Objects with 0 Devices 0 Methods 0 Regions
[    0.076278]  tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
[    0.077049] evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
[    0.078952] ENABLING IO-APIC IRQs
[    0.078988] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[    0.088986] net_namespace: 604 bytes
[    0.089545] NET: Registered protocol family 16
[    0.090470] EISA bus registered
[    0.090552] ACPI: bus type pci registered
[    0.098184] PCI: PCI BIOS revision 2.10 entry at 0xfd88c, last bus=1
[    0.098245] PCI: Using configuration type 1
[    0.098300] Setting up standard PCI resources
[    0.102693] evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 0F [_GPE] 2 regs on int 0xA
[    0.103506] evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0 Runtime GPEs in this block
[    0.103662] ACPI: EC: Look up EC in DSDT
[    0.105968] Completing Region/Field/Buffer/Package initialization:.....................................................
[    0.112060] Initialized 11/13 Regions 1/1 Fields 23/24 Buffers 18/26 Packages (492 nodes)
[    0.112177] Initializing Device/Processor/Thermal objects by executing _INI methods:.
[    0.112526] Executed 1 _INI methods requiring 1 _STA executions (examined 53 objects)
[    0.112716] ACPI: Interpreter enabled
[    0.112771] ACPI: (supports S0 S3 S4 S5)
[    0.113077] ACPI: Using IOAPIC for interrupt routing
[    0.124788] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.179757] ACPI: EC: GPE = 0xb, I/O: command/status = 0x66, data = 0x62
[    0.179821] ACPI: EC: driver started in interrupt mode
[    0.180082] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.181352] pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM
[    0.181414] pci 0000:00:11.0: quirk: region 8100-810f claimed by vt8235 SMB
[    0.181980] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.202274] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled.
[    0.203004] ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *11, disabled.
[    0.203688] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *10, disabled.
[    0.204105] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *5, disabled.
[    0.204594] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 12 14 15)
[    0.205274] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 12 14 15) *11
[    0.206020] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 11 12 14 15) *10
[    0.206725] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    0.207652] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.207835] pnp: PnP ACPI init
[    0.207979] ACPI: bus type pnp registered
[    0.210152] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.210904] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.211183] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.211452] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.211707] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.211833]  00:05: calling quirk 0xc025ae70: quirk_supermicro_h8dce_system+0x0/0x110()
[    0.212060] pnp 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.212369]  00:06: calling quirk 0xc025ae70: quirk_supermicro_h8dce_system+0x0/0x110()
[    0.212568] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.212825] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.213087] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.214222] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.215437] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.716893] ACPI: EC: missing write data confirmation, don't expect it any longer.
[    0.716893] pnp: PnP ACPI: found 11 devices
[    0.716893] ACPI: ACPI bus type pnp unregistered
[    0.717122] PCI: Using ACPI for IRQ routing
[    0.717182] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    0.721713] pnp: the driver 'system' has been registered
[    0.721749] system 00:05: iomem range 0x0-0x9ffff could not be reserved
[    0.721812] system 00:05: iomem range 0xe0000-0xfffff could not be reserved
[    0.721874] system 00:05: iomem range 0xfff00000-0xffffffff could not be reserved
[    0.721892] Time: tsc clocksource has been installed.
[    0.721899] system 00:05: iomem range 0xffee0000-0xffefffff has been reserved
[    0.721970] system 00:05: iomem range 0xfec00000-0xfec00fff has been reserved
[    0.722030] system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.722089] system 00:05: driver attached
[    0.722102] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[    0.722162] system 00:06: ioport range 0xfe10-0xfe11 has been reserved
[    0.722221] system 00:06: ioport range 0xfe00-0xfe00 has been reserved
[    0.722279] system 00:06: ioport range 0x4000-0x407f has been reserved
[    0.722339] system 00:06: ioport range 0x8100-0x811f could not be reserved
[    0.722398] system 00:06: driver attached
[    0.754398] PCI: Bridge: 0000:00:01.0
[    0.754456]   IO window: disabled.
[    0.754513]   MEM window: 0xd1000000-0xd1ffffff
[    0.754571]   PREFETCH window: 0x00000000f0000000-0x00000000f3ffffff
[    0.754633] PCI: Bus 2, cardbus bridge: 0000:00:0c.0
[    0.754688]   IO window: 0x00002000-0x000020ff
[    0.754745]   IO window: 0x00002400-0x000024ff
[    0.754802]   PREFETCH window: 0x50000000-0x53ffffff
[    0.754860]   MEM window: 0x54000000-0x57ffffff
[    0.754919] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    0.754933] PCI: Enabling device 0000:00:0c.0 (0000 -> 0003)
[    0.755001] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 16
[    0.755116] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[    0.755186] NET: Registered protocol family 2
[    0.755497] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.756308] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.757580] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
[    0.763772] TCP: Hash tables configured (established 131072 bind 65536)
[    0.763870] TCP reno registered
[    0.766722] audit: initializing netlink socket (disabled)
[    0.766836] type=2000 audit(1204965085.765:1): initialized
[    0.767283] highmem bounce pool size: 64 pages
[    0.768075] io scheduler noop registered
[    0.768150] io scheduler cfq registered (default)
[    0.768229] PCI: VIA PCI bridge detected. Disabling DAC.
[    0.768364] pci 0000:01:00.0: Boot video device
[    0.768771] isapnp: Scanning for PnP cards...
[    1.125810] isapnp: No Plug & Play device found
[    1.213098] Uniform Multi-Platform E-IDE driver
[    1.213162] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    1.213393] VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at  PCI slot 0000:00:11.1
[    1.213709] ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug
[    1.213892] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 23
[    1.213951] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 23
[    1.214015] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 23 (level, low) -> IRQ 23
[    1.214175] VP_IDE: not 100% native mode: will probe irqs later
[    1.214244] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[    1.214320]     ide0: BM-DMA at 0x1c60-0x1c67, BIOS settings: hda:DMA, hdb:PIO
[    1.214439]     ide1: BM-DMA at 0x1c68-0x1c6f, BIOS settings: hdc:DMA, hdd:PIO
[    1.214550] Probing IDE interface ide0...
[    1.254849] Switched to high resolution mode on CPU 0
[    1.753341] hdb: IRQ probe failed (0xfffffbfe)
[    2.027459] hdb: IRQ probe failed (0xfffffbfe)
[    2.454559] hda: SAMSUNG MP0804H, ATA DISK drive
[    2.454559] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[    2.454559] hda: UDMA/100 mode selected
[    2.454559] Probing IDE interface ide1...
[    3.858836] hdc: Optiarc DVD RW AD-7543A, ATAPI CD/DVD-ROM drive
[    3.858836] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[    3.858836] hdc: UDMA/33 mode selected
[    3.858836] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    3.955217] ide1 at 0x170-0x177,0x376 on irq 15
[    3.956394] pnp: the driver 'ide' has been registered
[    3.956587] hda: max request size: 512KiB
[    3.956738] hda: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=16383/255/63
[    3.957306] hda: cache flushes supported
[    3.957306]  hda: hda1 hda2 hda3
[    3.967508] TCP cubic registered
[    3.967590] NET: Registered protocol family 1
[    3.967671] NET: Registered protocol family 17
[    3.967753] Using IPI Shortcut mode
[    4.002215] ReiserFS: hda3: found reiserfs format "3.6" with standard journal
[    4.002215] ReiserFS: hda3: using ordered data mode
[    4.010740] ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[    4.011429] ReiserFS: hda3: checking transaction log (hda3)
[    4.090884] ReiserFS: hda3: Using r5 hash to sort names
[    4.090884] VFS: Mounted root (reiserfs filesystem) readonly.
[    4.090912] Freeing unused kernel memory: 272k freed
[    4.090990] Write protecting the kernel read-only data: 728k
[    9.361188] ACPI: CPU0 (power states: C1[C1] C2[C2])
[    9.361575] ACPI: ACPI0007:00 is registered as cooling_device0
[    9.376116] input: Power Button (FF) as /class/input/input0
[    9.380188] ACPI: Power Button (FF) [PWRF]
[    9.380461] input: Power Button (CM) as /class/input/input1
[    9.384134] ACPI: Power Button (CM) [PWB]
[    9.384375] input: Sleep Button (CM) as /class/input/input2
[    9.388117] ACPI: Sleep Button (CM) [SLPB]
[    9.388334] input: Lid Switch as /class/input/input3
[    9.388654] ACPI: Lid Switch [LID]
[    9.406233] ACPI thermal trips update, flag is 1f
[    9.406368] Checking invalid passive trip point...
[    9.406913] Checking invalid active[0] trip point...
[    9.407494] ACPI: LNXTHERM:01 is registered as thermal_zone0
[    9.407900] ACPI: Thermal Zone [THRM] (52 C)
[    9.427976] ACPI: AC Adapter [AC] (on-line)
[    9.445456] ACPI: Battery Slot [BAT0] (battery present)
[   10.061992] Marking TSC unstable due to: possible TSC halt in C2.
[   10.063180] Time: acpi_pm clocksource has been installed.
[   10.064517] 8139too Fast Ethernet driver 0.9.28
[   10.064652] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 19
[   10.066607] eth0: RealTek RTL8139 at 0xf88e6000, 00:90:f5:3e:5a:ca, IRQ 19
[   10.066667] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[   10.448212] usbcore: registered new interface driver usbfs
[   10.448412] usbcore: registered new interface driver hub
[   10.450627] usbcore: registered new device driver usb
[   10.585946] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[   10.586244] Uniform CD-ROM driver Revision: 3.20
[   10.670328] Real Time Clock Driver v1.12ac
[   10.726716] input: PC Speaker as /class/input/input4
[   10.863323] pnp: the driver 'parport_pc' has been registered
[   10.863357] parport_pc 00:0a: reported by Plug and Play ACPI
[   10.863683] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   10.943313] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[   10.944136] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   10.948101] parport_pc 00:0a: driver attached
[   10.964826] Yenta: CardBus bridge found at 0000:00:0c.0 [1558:4702]
[   10.964913] Yenta: Using CSCINT to route CSC interrupts to PCI
[   10.964970] Yenta: Routing CardBus interrupts to PCI
[   10.965028] Yenta TI: socket 0000:00:0c.0, mfunc 0x00001002, devctl 0x44
[   11.095213] pnp: the driver 'serial' has been registered
[   11.103937] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   11.104212] serial 00:09: driver attached
[   11.126727] USB Universal Host Controller Interface driver v3.0
[   11.188297] Yenta: ISA IRQ mask 0x0848, PCI irq 16
[   11.188360] Socket status: 30000006
[   11.208643] ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug
[   11.209031] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21
[   11.209092] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21
[   11.209157] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
[   11.209324] uhci_hcd 0000:00:10.0: UHCI Host Controller
[   11.216794] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[   11.216918] uhci_hcd 0000:00:10.0: irq 21, io base 0x00001c00
[   11.219799] usb usb1: configuration #1 chosen from 1 choice
[   11.221083] hub 1-0:1.0: USB hub found
[   11.221912] hub 1-0:1.0: 2 ports detected
[   11.325919] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
[   11.326090] uhci_hcd 0000:00:10.1: UHCI Host Controller
[   11.326230] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[   11.326336] uhci_hcd 0000:00:10.1: irq 21, io base 0x00001c20
[   11.326746] usb usb2: configuration #1 chosen from 1 choice
[   11.326874] hub 2-0:1.0: USB hub found
[   11.326949] hub 2-0:1.0: 2 ports detected
[   11.427760] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
[   11.427932] uhci_hcd 0000:00:10.2: UHCI Host Controller
[   11.428073] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[   11.428190] uhci_hcd 0000:00:10.2: irq 21, io base 0x00001c40
[   11.428598] usb usb3: configuration #1 chosen from 1 choice
[   11.428737] hub 3-0:1.0: USB hub found
[   11.428812] hub 3-0:1.0: 2 ports detected
[   11.526327] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 21
[   11.526510] ehci_hcd 0000:00:10.3: EHCI Host Controller
[   11.526672] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[   11.526825] ehci_hcd 0000:00:10.3: irq 21, io mem 0xd0004400
[   11.532952] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   11.533358] usb usb4: configuration #1 chosen from 1 choice
[   11.533500] hub 4-0:1.0: USB hub found
[   11.533937] hub 4-0:1.0: 6 ports detected
[   11.633343] ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug
[   11.633518] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[   11.633579] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[   11.633643] ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22
[   11.634318] PCI: Setting latency timer of device 0000:00:11.6 to 64
[   11.930379] cs: IO port probe 0x100-0x4ff: clean.
[   11.933814] cs: IO port probe 0x800-0x8ff: clean.
[   11.935262] cs: IO port probe 0xc00-0xcff: clean.
[   11.936601] cs: IO port probe 0xa00-0xaff: clean.
[   12.138085] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22
[   12.138447] PCI: Setting latency timer of device 0000:00:11.5 to 64
[   14.809747] Adding 1951888k swap on /dev/hda2.  Priority:-1 extents:1 across:1951888k
[   25.861658] pnp: the driver 'i8042 kbd' has been registered
[   25.861700] i8042 kbd 00:08: driver attached
[   25.861743] pnp: the driver 'i8042 aux' has been registered
[   25.861769] i8042 aux 00:07: driver attached
[   25.861805] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   25.864317] i8042.c: Detected active multiplexing controller, rev 1.1.
[   25.865882] serio: i8042 KBD port at 0x60,0x64 irq 1
[   25.870494] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   25.870597] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   25.870655] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   25.870712] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   25.895252] input: AT Translated Set 2 keyboard as /class/input/input5
[   26.352467] input: PS/2 Mouse as /class/input/input6
[   26.368240] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 2600+ processors (1 cpu cores) (version 2.20.00)
[   26.371532] input: AlpsPS/2 ALPS GlidePoint as /class/input/input7
[   26.371619] powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0x6
[   26.371676] powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x18
[   26.386974] powernow-k8: ph2 null fid transition 0x8
[   26.420489] mice: PS/2 mouse device common for all mice
[   26.703416] Linux agpgart interface v0.103
[   26.916272] [drm] Initialized drm 1.1.0 20060810
[   26.998818] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   26.999692] [drm] Initialized via 2.11.1 20070202 on minor 0
[   27.036657] leds_clevo_mail: 'Clevo D410J' found
[   27.037222] Registered led device: clevo::mail
[   36.785700] ReiserFS: hda1: found reiserfs format "3.6" with standard journal
[   36.785700] ReiserFS: hda1: using ordered data mode
[   36.789716] ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   36.790218] ReiserFS: hda1: checking transaction log (hda1)
[   36.856539] ReiserFS: hda1: Using r5 hash to sort names
[   38.259715] ip_tables: (C) 2000-2006 Netfilter Core Team
[   38.559206] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[   40.145900] NET: Registered protocol family 10
[   46.253020] lp0: using parport0 (interrupt-driven).
[   46.286238] ppdev: user-space parallel port driver
[   46.689358] Clocksource tsc unstable (delta = -302659936 ns)
[   50.080148] eth0: no IPv6 routers present
[   53.901672] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[  111.335078] irq 16: nobody cared (try booting with the "irqpoll" option)
[  111.335078] Pid: 0, comm: swapper Not tainted 2.6.25-rc4 #7
[  111.335078]  [<c0157227>] __report_bad_irq+0x27/0x90
[  111.335078]  [<c01574c6>] note_interrupt+0x236/0x270
[  111.335078]  [<c01568d3>] ? handle_IRQ_event+0x53/0x60
[  111.335078]  [<c0157b6a>] handle_fasteoi_irq+0x7a/0xd0
[  111.335078]  [<c0106174>] do_IRQ+0x44/0xa0
[  111.335078]  [<c0104c66>] common_interrupt+0x2e/0x34
[  111.335078]  [<c03023e8>] ? _spin_unlock_irq+0x28/0x50
[  111.335078]  [<c0118974>] finish_task_switch+0x54/0xc0
[  111.335078]  [<c0118920>] ? finish_task_switch+0x0/0xc0
[  111.335078]  [<c02ffc46>] schedule+0x2b6/0x470
[  111.335078]  [<f892fdae>] ? acpi_processor_idle+0x0/0x436 [processor]
[  111.335078]  [<c0102b65>] cpu_idle+0xb5/0xd0
[  111.335078]  [<c02faf8c>] rest_init+0x5c/0x60
[  111.335078]  =======================
[  111.335078] handlers:
[  111.335078] [<f8971830>] (yenta_interrupt+0x0/0xe0 [yenta_socket])
[  111.335078] [<f8be03f0>] (via_driver_irq_handler+0x0/0x1c0 [via])
[  111.335078] Disabling IRQ #16
reviewer
#9 lore raw
Quoted 44 lines · Németh Márton
Quoted 5 lines · Rui
Quoted 4 lines · Németh Márton

Hi,

I downloaded pmtools from

http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/pmtools-20071116.tar.bz2 and

Quoted 3 lines
Quoted 3 lines

compiled: it created exactly the same result what my currently installed acpidump Debian
package version 20071116-1. I think it is useless to send the same

log

Quoted 3 lines
Quoted 3 lines

again.

After I boot the "Please send acpidump to

[email protected]"

Quoted 20 lines
Quoted 20 lines

message is already
there. So when I first get the prompt I checked for this message in dmesg and executed
the given command. Here is my result:

# cat /proc/acpi/thermal_zone/*/*
0 - Active; 1 - Passive
<polling disabled>
state:                   ok
temperature:             42 C
critical (S5):           155 C
passive:                 84 C: tc1=2 tc2=5 tsp=0 devices=CPU0
active[0]:               70 C: devices=
# ls /proc/acpi/thermal_zone/*/*
/proc/acpi/thermal_zone/THRM/cooling_mode
/proc/acpi/thermal_zone/THRM/polling_frequency
/proc/acpi/thermal_zone/THRM/state
/proc/acpi/thermal_zone/THRM/temperature
/proc/acpi/thermal_zone/THRM/trip_points
Quoted 6 lines
Quoted 3 lines

Maybe this is related to
http://bugzilla.kernel.org/show_bug.cgi?id=8544 ?

Hi, Németh,

Please ignore the debug patch I sent and try this one.

I created both the dmesg logs:

Quoted 9 lines

1. Clevo-D410J-patch-debug-thermal2.txt: the patch-debug-thermal was only
applied, (and added a missing "\n").

2. Clevo-D410J-thermal-fix.txt: the thermal-fix patch was also applied.
In this case the AE_ERROR message is not there any more on Clevo D410J laptop.

Thanks for your help in debugging this.
We will get the "thermal-fix" patch upstream soon.

thanks,
rui

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

author
#10 lore raw
Quoted 48 lines · Rui
Quoted 47 lines · Németh Márton
Quoted 5 lines · Rui
Quoted 4 lines · Németh Márton

Hi,

I downloaded pmtools from

http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/pmtools-20071116.tar.bz2 and

Quoted 3 lines
Quoted 3 lines

compiled: it created exactly the same result what my currently installed acpidump Debian
package version 20071116-1. I think it is useless to send the same

log

Quoted 3 lines
Quoted 3 lines

again.

After I boot the "Please send acpidump to

[email protected]"

Quoted 20 lines
Quoted 20 lines

message is already
there. So when I first get the prompt I checked for this message in dmesg and executed
the given command. Here is my result:

# cat /proc/acpi/thermal_zone/*/*
0 - Active; 1 - Passive
<polling disabled>
state:                   ok
temperature:             42 C
critical (S5):           155 C
passive:                 84 C: tc1=2 tc2=5 tsp=0 devices=CPU0
active[0]:               70 C: devices=
# ls /proc/acpi/thermal_zone/*/*
/proc/acpi/thermal_zone/THRM/cooling_mode
/proc/acpi/thermal_zone/THRM/polling_frequency
/proc/acpi/thermal_zone/THRM/state
/proc/acpi/thermal_zone/THRM/temperature
/proc/acpi/thermal_zone/THRM/trip_points
Quoted 6 lines
Quoted 3 lines

Maybe this is related to
http://bugzilla.kernel.org/show_bug.cgi?id=8544 ?

Hi, Németh,

Please ignore the debug patch I sent and try this one.

I created both the dmesg logs:

1. Clevo-D410J-patch-debug-thermal2.txt: the patch-debug-thermal was only
applied, (and added a missing "\n").

Quoted 7 lines
Quoted 5 lines

2. Clevo-D410J-thermal-fix.txt: the thermal-fix patch was also applied.
In this case the AE_ERROR message is not there any more on Clevo D410J laptop.

Thanks for your help in debugging this.
We will get the "thermal-fix" patch upstream soon.

As of 2.6.27-rc3 the patch is still not included in the mainstream. I hope that this patch was not forgotten completely.

Márton Németh

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#11 lore raw
Quoted 3 lines · Németh Márton

As of 2.6.27-rc3 the patch is still not included in the mainstream. I hope that this patch was not forgotten completely.

It's already in Linus' tree, will be in rc4.

-Andi
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

author
#12 lore raw

Hi,

Quoted 5 lines · Andi Kleen
Quoted 2 lines · Németh Márton

As of 2.6.27-rc3 the patch is still not included in the mainstream. I hope that this patch was not forgotten completely.

It's already in Linus' tree, will be in rc4.

I compiled and tried 2.6.28-rc5. In the dmesg I get the following message:

[   63.589603] ACPI Exception (thermal-0538): AE_ERROR, ACPI thermal trip point state changed
[   63.589669] Please send acpidump to [email protected]
[   63.589805]  [20080926]

The original patch still applies for 2.6.28-rc5 (with some offsets). This patch is not included in 2.6.28-rc5, yet. The "AE_ERROR..." message does not appear any more if I apply the patch. I attached this original patch for easier reference.

Regards,

Márton Németh

thermal fixup for broken BIOS which has invalid trip points.

ACPI thermal driver only re-evaluate valid trip points. For the broken BIOS show in
http://bugzilla.kernel.org/show_bug.cgi?id=8544
the active[0] is set to invalid at boot time and it will not be re-evaluated again.
We can still get a warning message at boot time.

http://marc.info/?l=linux-kernel&m=120496222629983&w=2

Signed-off-by Zhang Rui<[email protected]>
---
 drivers/acpi/thermal.c |   16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)
drivers/acpi/thermal.c +12 -4
Index: linux-2.6/drivers/acpi/thermal.c
===================================================================
@@ -401,7 +401,8 @@ static int acpi_thermal_trips_update(str
 	}
 
 	/* Passive (optional) */
-	if (flag & ACPI_TRIPS_PASSIVE) {
+	if (((flag & ACPI_TRIPS_PASSIVE) && tz->trips.passive.flags.valid) ||
+		(flag == ACPI_TRIPS_INIT)) {
 		valid = tz->trips.passive.flags.valid;
 		if (psv == -1) {
 			status = AE_SUPPORT;

@@ -440,8 +441,11 @@ static int acpi_thermal_trips_update(str
 		memset(&devices, 0, sizeof(struct acpi_handle_list));
 		status = acpi_evaluate_reference(tz->device->handle, "_PSL",
 							NULL, &devices);
-		if (ACPI_FAILURE(status))
+		if (ACPI_FAILURE(status)) {
+			printk(KERN_WARNING PREFIX
+				"Invalid passive threshold\n");
 			tz->trips.passive.flags.valid = 0;
+		}
 		else
 			tz->trips.passive.flags.valid = 1;
 

@@ -465,7 +469,8 @@ static int acpi_thermal_trips_update(str
 		if (act == -1)
 			break; /* disable all active trip points */
 
-		if (flag & ACPI_TRIPS_ACTIVE) {
+		if ((flag == ACPI_TRIPS_INIT) || ((flag & ACPI_TRIPS_ACTIVE) &&
+			tz->trips.active[i].flags.valid)) {
 			status = acpi_evaluate_integer(tz->device->handle,
 				name, NULL, &tz->trips.active[i].temperature);
 			if (ACPI_FAILURE(status)) {

@@ -497,8 +502,11 @@ static int acpi_thermal_trips_update(str
 			memset(&devices, 0, sizeof(struct acpi_handle_list));
 			status = acpi_evaluate_reference(tz->device->handle,
 						name, NULL, &devices);
-			if (ACPI_FAILURE(status))
+			if (ACPI_FAILURE(status)) {
+				printk(KERN_WARNING PREFIX
+					"Invalid active%d threshold\n", i);
 				tz->trips.active[i].flags.valid = 0;
+			}
 			else
 				tz->trips.active[i].flags.valid = 1;
#13 lore raw
Quoted 11 lines · Németh Márton

Hi,

Quoted 5 lines · Andi Kleen
Quoted 2 lines · Németh Márton

As of 2.6.27-rc3 the patch is still not included in the mainstream. I hope that this patch was not forgotten completely.

It's already in Linus' tree, will be in rc4.

I compiled and tried 2.6.28-rc5. In the dmesg I get the following message:

Quoted 7 lines
[   63.589603] ACPI Exception (thermal-0538): AE_ERROR, ACPI thermal trip point state changed
[   63.589669] Please send acpidump to [email protected]
[   63.589805]  [20080926]

The original patch still applies for 2.6.28-rc5 (with some offsets). This patch is not included in 2.6.28-rc5, yet. The "AE_ERROR..." message does not appear any more if I apply the patch. I attached this original patch for easier reference.

Hmm sorry I must have confused it with some other patch back then. Anyways Len Brown is handling ACPI again now, so he'll have to sort it out. cc'ed (the original patch is on linux-acpi)

-Andi

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

author
#14 lore raw
Quoted 14 lines · Andi Kleen
Quoted 13 lines · Németh Márton

Hi,

Quoted 4 lines · Andi Kleen
Quoted 2 lines · Németh Márton

As of 2.6.27-rc3 the patch is still not included in the mainstream. I hope that this patch was not forgotten completely.

It's already in Linus' tree, will be in rc4.

I compiled and tried 2.6.28-rc5. In the dmesg I get the following message:

[   63.589603] ACPI Exception (thermal-0538): AE_ERROR, ACPI thermal trip point state changed
[   63.589669] Please send acpidump to [email protected]
[   63.589805]  [20080926]
Quoted 7 lines
Quoted 3 lines

The original patch still applies for 2.6.28-rc5 (with some offsets). This patch is not included in 2.6.28-rc5, yet. The "AE_ERROR..." message does not appear any more if I apply the patch. I attached this original patch for easier reference.

Hmm sorry I must have confused it with some other patch back then. Anyways Len Brown is handling ACPI again now, so he'll have to sort it out. cc'ed (the original patch is on linux-acpi)

This is just a status report about 2.6.28-rc7, nothing more. The AE_ERROR message is still in the dmesg. The patch still solves the problem.

Regards,

Márton Németh
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

reviewer
#15 lore raw
Quoted 19 lines · Németh Márton
Quoted 18 lines · Andi Kleen
Quoted 16 lines · Németh Márton

Hi,

Quoted 4 lines · Andi Kleen
Quoted 2 lines · Németh Márton

As of 2.6.27-rc3 the patch is still not included in the mainstream. I hope that this patch was not forgotten completely.

It's already in Linus' tree, will be in rc4.

I compiled and tried 2.6.28-rc5. In the dmesg I get the following message:

[   63.589603] ACPI Exception (thermal-0538): AE_ERROR, ACPI thermal trip point state changed
[   63.589669] Please send acpidump to [email protected]
[   63.589805]  [20080926]

The original patch still applies for 2.6.28-rc5 (with some offsets). This patch is not included in 2.6.28-rc5, yet. The "AE_ERROR..." message does not appear any more if I apply the patch. I attached this original patch for easier reference.

Quoted 7 lines
Quoted 3 lines

Hmm sorry I must have confused it with some other patch back then. Anyways Len Brown is handling ACPI again now, so he'll have to sort it out. cc'ed (the original patch is on linux-acpi)

This is just a status report about 2.6.28-rc7, nothing more. The AE_ERROR message is still in the dmesg. The patch still solves the problem.

do you mean this patch:
http://marc.info/?l=linux-acpi&m=120522267418715&w=2

thanks,
rui

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

author
#16 lore raw
Quoted 19 lines · Zhang Rui
Quoted 18 lines · Németh Márton
Quoted 17 lines · Andi Kleen
Quoted 16 lines · Németh Márton

Hi,

Quoted 4 lines · Andi Kleen
Quoted 2 lines · Németh Márton

As of 2.6.27-rc3 the patch is still not included in the mainstream. I hope that this patch was not forgotten completely.

It's already in Linus' tree, will be in rc4.

I compiled and tried 2.6.28-rc5. In the dmesg I get the following message:

[   63.589603] ACPI Exception (thermal-0538): AE_ERROR, ACPI thermal trip point state changed
[   63.589669] Please send acpidump to [email protected]
[   63.589805]  [20080926]

The original patch still applies for 2.6.28-rc5 (with some offsets). This patch is not included in 2.6.28-rc5, yet. The "AE_ERROR..." message does not appear any more if I apply the patch. I attached this original patch for easier reference.

Quoted 8 lines
Quoted 6 lines
Quoted 3 lines

Hmm sorry I must have confused it with some other patch back then. Anyways Len Brown is handling ACPI again now, so he'll have to sort it out. cc'ed (the original patch is on linux-acpi)

This is just a status report about 2.6.28-rc7, nothing more. The AE_ERROR message is still in the dmesg. The patch still solves the problem.

do you mean this patch:
http://marc.info/?l=linux-acpi&m=120522267418715&w=2

Yes, exactly.

Márton Németh

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

author
#17 lore raw

Németh Márton írta:

Quoted 23 lines
Quoted 22 lines · Zhang Rui
Quoted 21 lines · Németh Márton
Quoted 20 lines · Andi Kleen
Quoted 9 lines · Németh Márton

Hi,

Quoted 4 lines · Andi Kleen
Quoted 2 lines · Németh Márton

As of 2.6.27-rc3 the patch is still not included in the mainstream. I hope that this patch was not forgotten completely.

It's already in Linus' tree, will be in rc4.

I compiled and tried 2.6.28-rc5. In the dmesg I get the following message:

Quoted 7 lines
[   63.589603] ACPI Exception (thermal-0538): AE_ERROR, ACPI thermal trip point state changed
[   63.589669] Please send acpidump to [email protected]
[   63.589805]  [20080926]

The original patch still applies for 2.6.28-rc5 (with some offsets). This patch is not included in 2.6.28-rc5, yet. The "AE_ERROR..." message does not appear any more if I apply the patch. I attached this original patch for easier reference.

Hmm sorry I must have confused it with some other patch back then. Anyways Len Brown is handling ACPI again now, so he'll have to sort it out. cc'ed (the original patch is on linux-acpi)

Quoted 7 lines
Quoted 5 lines
Quoted 3 lines

This is just a status report about 2.6.28-rc7, nothing more. The AE_ERROR message is still in the dmesg. The patch still solves the problem.

do you mean this patch:
http://marc.info/?l=linux-acpi&m=120522267418715&w=2

Yes, exactly.

Status report: the mentioned patch is not yet included in 2.6.28.

Regards,

Márton Németh

reviewer
#18 lore raw
In reply to Németh Márton
Quoted 54 lines · Németh Márton
Quoted 53 lines · Rui
Quoted 52 lines · Németh Márton
Quoted 5 lines · Rui
Quoted 4 lines · Németh Márton

Hi,

I downloaded pmtools from

http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/pmtools-20071116.tar.bz2 and

Quoted 3 lines
Quoted 3 lines

compiled: it created exactly the same result what my currently installed acpidump Debian
package version 20071116-1. I think it is useless to send the same

log

Quoted 3 lines
Quoted 3 lines

again.

After I boot the "Please send acpidump to

[email protected]"

Quoted 20 lines
Quoted 20 lines

message is already
there. So when I first get the prompt I checked for this message in dmesg and executed
the given command. Here is my result:

# cat /proc/acpi/thermal_zone/*/*
0 - Active; 1 - Passive
<polling disabled>
state:                   ok
temperature:             42 C
critical (S5):           155 C
passive:                 84 C: tc1=2 tc2=5 tsp=0 devices=CPU0
active[0]:               70 C: devices=
# ls /proc/acpi/thermal_zone/*/*
/proc/acpi/thermal_zone/THRM/cooling_mode
/proc/acpi/thermal_zone/THRM/polling_frequency
/proc/acpi/thermal_zone/THRM/state
/proc/acpi/thermal_zone/THRM/temperature
/proc/acpi/thermal_zone/THRM/trip_points
Quoted 6 lines
Quoted 3 lines

Maybe this is related to
http://bugzilla.kernel.org/show_bug.cgi?id=8544 ?

Hi, Németh,

Please ignore the debug patch I sent and try this one.

I created both the dmesg logs:

1. Clevo-D410J-patch-debug-thermal2.txt: the patch-debug-thermal was only
applied, (and added a missing "\n").

2. Clevo-D410J-thermal-fix.txt: the thermal-fix patch was also applied.
In this case the AE_ERROR message is not there any more on Clevo D410J laptop.

Quoted 7 lines
Quoted 2 lines

Thanks for your help in debugging this.
We will get the "thermal-fix" patch upstream soon.

As of 2.6.27-rc3 the patch is still not included in the mainstream. I hope that this patch was not forgotten completely.

Márton Németh

Apparently it was dropped.

should have put the patch here:
http://bugzilla.kernel.org/show_bug.cgi?id=8544

I'll do it now.

thanks,
-Len