ppc4xx: Support for ATI Radeon 9200 card on sequoia
PATCH 1/1 ppc4xx: Support for ATI Radeon 9200 card on sequoia
Adds configuration option for ATI Radeon 9200 card support to sequoia config file. If CONFIG_VIDEO is enabled, TEXT_BASE should be changed to 0xFFF80000.
Signed-off-by Anatolij Gustschin <[email protected]>
--- include/configs/sequoia.h | 26 +++++++++++++++++++++++++- 1 files changed, 25 insertions(+), 1 deletions(-)
include/configs/sequoia.h +25 -1
@@ -43,7 +43,13 @@#define CONFIG_SYS_CLK_FREQ ((in8(CFG_BCSR_BASE + 3) & 0x80) ? \ 33333333 : 33000000) -#if 0 +/* +* Define this if you want support for video console with radeon 9200 pci card +* Also set TEXT_BASE to 0xFFF80000 in board/amcc/sequoia/config.mk in this case +*/ +#undef CONFIG_VIDEO + +#ifdef CONFIG_VIDEO /* * 44x dcache supported is working now on sequoia, but we don't enable * it yet since it needs further testing
@@ -58,8 +64,13 @@* Base addresses -- Note these are effective addresses where the actual * resources get mapped (not physical addresses). */ +#ifndef CONFIG_VIDEO #define CFG_MONITOR_LEN (384 * 1024)/* Reserve 384 kiB for Monitor */ #define CFG_MALLOC_LEN (256 * 1024)/* Reserve 256 kiB for malloc() */ +#else +#define CFG_MONITOR_LEN (512 * 1024)/* Reserve 512 kB for Monitor */ +#define CFG_MALLOC_LEN (1024 * 1024)/* Reserve 1024 kB for malloc() */ +#endif #define CFG_TLB_FOR_BOOT_FLASH 0x0003#define CFG_BOOT_BASE_ADDR 0xf0000000
@@ -571,4 +582,17 @@#define CONFIG_OF_LIBFDT 1#define CONFIG_OF_BOARD_SETUP 1 +#ifdef CONFIG_VIDEO +#define CONFIG_BIOSEMU /* x86 bios emulator for vga bios */ +#define CONFIG_ATI_RADEON_FB /* use radeon framebuffer driver */ +#define VIDEO_IO_OFFSET 0xe8000000 +#define CFG_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_VIDEO_LOGO +#define CONFIG_CFB_CONSOLE +#define CONFIG_SPLASH_SCREEN +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_CMD_BMP +#endif +#endif /* __CONFIG_H */
Signature · 1 line
1.5.3.3
Wolfgang Denk
AppliedPATCH 1/1 ppc4xx: Support for ATI Radeon 9200 card on sequoia
Quoted 8 lines · In message <[email protected]> you wrote:
Adds configuration option for ATI Radeon 9200 card support to sequoia config file. If
CONFIG_VIDEOis enabled,TEXT_BASEshould be changed to0xFFF80000.Signed-off-by Anatolij Gustschin <[email protected]>--- include/configs/sequoia.h | 26 +++++++++++++++++++++++++- 1 files changed, 25 insertions(+), 1 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de An optimist believes we live in the best world possible; a pessimist fears this is true.