Skip to contentSkip to conversation

nVidia MCP55 SATA hotplug support?

DISCUSSION Mourad De Clerck 3 participants 3 messages Mar 11, 2008 – Mar 29, 2008 libata

lore
Share & tools
lore
#0 lore raw

Hello,

I was wondering what the status was of MCP55 hotplug support. To be more specific, I'm interested in support for this device:

00:05.0 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3)

I was led to believe by the driver feature matrix (on
http://linux-ata.org/driver-status.html#matrix) that the sata_nv driver had working hotplug support. After a bit of googling, I found out that there was at one point a "hotplug polling" patchset by Tejun Heo to support it - but that was quite a long while ago.

Will we see this appearing in mainline in the (near) future?

Thank you,

-- Mourad DC

#1 lore raw

My hardware is:

00:0e.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2) 00:0e.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2) 00:0e.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)

And hotplug does not work, too.

chrisi@mars:~$ lsmod | grep sata
sata_sil24             15236  0 
sata_nv                20612  2 
libata                125168  3 sata_sil24,sata_nv,ata_generic

There are no info in dmesg wenn plug or un-plug a drive. On Windows hotplug works.

Does anybody knows hot to activate hotplug?

thank you!

Chris

#2 lore raw
Quoted 9 lines · Christian Spindler

My hardware is:

00:0e.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2) 00:0e.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2) 00:0e.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)

And hotplug does not work, too.

Quoted 8 lines
chrisi@mars:~$ lsmod | grep sata
sata_sil24             15236  0 sata_nv                20612  2 libata                125168  3 sata_sil24,sata_nv,ata_generic

There are no info in dmesg wenn plug or un-plug a drive. On Windows hotplug works.

Does anybody knows hot to activate hotplug?

sata_nv.swncq=1 will get you the hotplug interrupts along with NCQ support. It might not be completely stable tho.

Signature · 1 line
tejun