Skip to contentSkip to conversation

MT2266 I2C write failed, usb disconnet, WinTV Nova-TD stick, remote

linux-dvb Bernhard Albers 3 participants 3 messages Mar 12, 2008 – Mar 13, 2008 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Hello everyone!

I recently installed mythbunut 7.10 and tried to get the WinTV Nova-TD stick working with the latest v4l-sources (mercurial)

Output of lsusb:  ID 2040:9580 Hauppauge
Hauppauge Remote: A415-HPG-WE-A

When I start mythbuntu, I get the following error, after switching the channels using the mythbuntu frontend (dmesg):

##########

[   11.460000] dib0700: loaded with support for 6 different device-types
[   11.460000] dvb-usb: found a 'Hauppauge Nova-TD Stick/Elgato Eye-TV
Diversity' in warm state.
[   11.460000] dvb-usb: will pass the complete MPEG2 transport stream to
the software demuxer.
[   11.464000] DVB: registering new adapter (Hauppauge Nova-TD
Stick/Elgato Eye-TV Diversity)
[   11.708000] DVB: registering frontend 0 (DiBcom 7000PC)...
[   11.764000] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level,
low) -> IRQ 16
[   11.776000] MT2266: successfully identified
[   11.900000] input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
[   11.904000] input: PC Speaker as /class/input/input3
[   11.904000] parport_pc 00:0a: reported by Plug and Play ACPI
[   11.904000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[   11.932000] dvb-usb: will pass the complete MPEG2 transport stream to
the software demuxer.
[   11.932000] DVB: registering new adapter (Hauppauge Nova-TD
Stick/Elgato Eye-TV Diversity)
[   11.984000] hda_codec: Unknown model for ALC883, trying auto-probe
from BIOS...
[   12.084000] DVB: registering frontend 1 (DiBcom 7000PC)...
[   12.088000] MT2266: successfully identified
[   12.244000] input: IR-receiver inside an USB DVB receiver as
/class/input/input4
[   12.244000] dvb-usb: schedule remote query interval to 150 msecs.
[   12.244000] dvb-usb: Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity
successfully initialized and connected.
[   12.244000] usbcore: registered new interface driver dvb_usb_dib0700
[   12.644000] lp0: using parport0 (interrupt-driven).
[   12.864000] Adding 2642652k swap on /dev/sda5.  Priority:-1 extents:1
across:2642652k
[  172.720000] EXT3 FS on sda1, internal journal
[  174.548000] input: Power Button (FF) as /class/input/input5
[  174.548000] ACPI: Power Button (FF) [PWRF]
[  174.548000] input: Power Button (CM) as /class/input/input6
[  174.548000] ACPI: Power Button (CM) [PWRB]
[  174.596000] No dock devices found.
[  177.108000] r8169: eth0: link up
[  177.108000] r8169: eth0: link up
[  177.744000] NET: Registered protocol family 10
[  177.748000] lo: Disabled Privacy Extensions
[  189.300000] NET: Registered protocol family 17
[  203.584000] eth0: no IPv6 routers present
[  232.720000] hda-intel: Invalid position buffer, using LPIB read
method instead.
[  428.888000] UDF-fs: Partition marked readonly; forcing readonly mount
[  428.936000] UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume
'Belleville', timestamp 2036/02/07 02:58 (103c)
[  459.596000] dib0700: Unknown remote controller key: 12 2A  1  0
[  459.748000] dib0700: Unknown remote controller key:  F  A  1  0
[  628.492000] hub 4-0:1.0: port 9 disabled by hub (EMI?), re-enabling...
[  628.492000] usb 4-9: USB disconnect, address 2
[  628.500000] MT2266 I2C write failed
[  628.500000] MT2266 I2C write failed
[  650.208000] dvb-usb: error while stopping stream.
[  650.208000] MT2266 I2C write failed (len=9)
[  650.224000] MT2266 I2C write failed (len=4)
[  650.224000] MT2266 I2C write failed (len=3)
[  650.224000] MT2266 I2C read failed
[  650.240000] MT2266 I2C read failed
[  650.256000] MT2266 I2C read failed
[  650.272000] MT2266 I2C read failed
[  650.288000] MT2266 I2C read failed
[  650.304000] MT2266 I2C read failed
[  650.320000] MT2266 I2C read failed
[  650.336000] MT2266 I2C read failed
[  650.352000] MT2266 I2C read failed
[  650.368000] MT2266 I2C read failed

###########

If I disable the remote sensor in "/etc/modprobe.d/options" via "options dvb_usb disable_rc_polling=1" this i2c failures do not seem to occur.

Maybe it is a problem of the mainboard. It is an Asus m2a-vm hdmi (amd690g chipset and ati x1250 onboard graphics) with the latest Bios (1604).

Best regards
Bernhard

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

#1 lore raw
Quoted 9 lines · Bernhard Albers
[  628.492000] hub 4-0:1.0: port 9 disabled by hub (EMI?), re-enabling...
[  628.492000] usb 4-9: USB disconnect, address 2
[  628.500000] MT2266 I2C write failed
[  628.500000] MT2266 I2C write failed
[  650.208000] dvb-usb: error while stopping stream.

Maybe it is a problem of the mainboard. It is an Asus m2a-vm hdmi (amd690g chipset and ati x1250 onboard graphics) with the latest Bios (1604).

Interesting theory...
I'm seeing the same thing on a Biostar TA690G mainboard, which uses the same chipset. It works fine on my desktop machine though (VIA K8T800PRO chipset; ASUS A8V Deluxe) and on my ASUS Eee (can't remember off-hand what chipset that uses, an Intel one of some description IIRC).

Had some strange signal issues with the Nova-TD-Stick too - Tuner 0 worked fine, but Tuner 1 failed to lock onto the mux that carries FilmFour. Putting a 6dB attenuator inline fixed that nicely -- seems the low-noise amplifier in the Microtune chip sets its level based on an average of the whole band it's tuned to. Lots of strong signals = low amplification = not much signal strength going into the DiBcom decoder/demux chip. Weaken some of the strong signals, and it's fine. Most peculiar.

Signature · 8 lines
Phil.                         |  (\_/)  This is Bunny. Copy and paste Bunny
[email protected]           | (='.'=) into your signature to help him gain
http://www.philpem.me.uk/     | (")_(") world domination.

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
#2 lore raw

Il giorno mer, 12/03/2008 alle 21.40 +0000, Philip Pemberton ha scritto:

Quoted 7 lines
Quoted 5 lines · Bernhard Albers
[  628.492000] hub 4-0:1.0: port 9 disabled by hub (EMI?), re-enabling...
[  628.492000] usb 4-9: USB disconnect, address 2
[  628.500000] MT2266 I2C write failed
[  628.500000] MT2266 I2C write failed
[  650.208000] dvb-usb: error while stopping stream.
Quoted 6 lines
Quoted 3 lines

Maybe it is a problem of the mainboard. It is an Asus m2a-vm hdmi (amd690g chipset and ati x1250 onboard graphics) with the latest Bios (1604).

Interesting theory...
I'm seeing the same thing on a Biostar TA690G mainboard, which uses the same

I've already told it to Bernard but not yet in the list:
Notice that this one seems to be a known issue (even to windows people) related to an incompatibility between 690g mainboard (more precisely sb600 southbridge) and nova td stick. It seems that it causes usb disconnect when the stick works in dual mode (always in linux) using both tuners at the same time. People reported the problem can be solved with a pci usb expansion or using the stick with another mainboard. There is also a note about it in the linuxtv wiki (NOVA-TD Stick page). It's interesting to note that both you and Bernard experienced the problem even with just one tuner.

Some link:
http://209.85.165.104/search?q=cache:3LygRMoeRqUJ:www.hauppauge.co.uk/board/showthread.php%3Ft%3D14152+nova+td+690g&hl=it&ct=clnk&cd=1

http://209.85.165.104/search?q=cache:KWnzteJ-zZkJ:www.hauppauge.co.uk/board/archive/index.php%3Ft-14247.html+nova+td+690g&hl=it&ct=clnk&cd=2

http://209.85.165.104/search?q=cache:-UJFsa42dsEJ:www.hauppauge.co.uk/board/archive/index.php%3Ft-14152.html+nova+td+sb600&hl=it&ct=clnk&cd=4

http://209.85.165.104/search?q=cache:tcwgQWV-jEUJ:www.hauppauge.co.uk/board/showthread.php%3Fp%3D63962+nova+td+sb600&hl=it&ct=clnk&cd=3

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb