Skip to contentSkip to conversation

Reboot problem with Dell Optiplex 745 on 2.6.23/24

PATCH Heinz-Ado Arnolds 2 participants 2 messages Mar 12, 2008 – Mar 21, 2008

lore
Share & tools
lore
#0 lore raw

Hi there,

we have seen a little problem in rebooting Dell Optiplex 745 with the 0KW626 board. A small patch for 2.6.23 enabling reboot with this board is attached.

Kind regards,

Ado

--
________________________________________________________________________

Dipl.-Ing. Heinz-Ado Arnolds

MPI fuer Astrophysik
Karl-Schwarzschild-Strasse 1
D-85748 Garching

Phone:  +49/89/30000-2217
FAX  :  +49/89/30000-2388
email:  arnolds[at]MPA-Garching.MPG.DE

________________________________________________________________________

arch/i386/kernel/reboot.c renamed from arch/i386/kernel/reboot.c.orig +9 -0
@@ -122,6 +122,15 @@
 			DMI_MATCH(DMI_BOARD_NAME, "0WF810"),
 		},
 	},
+	{       /* Handle problems with rebooting on Dell Optiplex 745 with 0KW626 */
+		.callback = set_bios_reboot,
+		.ident = "Dell OptiPlex 745",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 745"),
+			DMI_MATCH(DMI_BOARD_NAME, "0KW626"),
+		},
+	},
 	{	/* Handle problems with rebooting on Dell 2400's */
 		.callback = set_bios_reboot,
 		.ident = "Dell PowerEdge 2400",
#1 lore raw
Quoted 5 lines · Heinz-Ado Arnolds

Hi there,

we have seen a little problem in rebooting Dell Optiplex 745 with the 0KW626 board. A small patch for 2.6.23 enabling reboot with this board is attached.

thanks Heinz, applied.

Ingo