Skip to contentSkip to conversation

SPARC: Added SPARC board information to bdinfo command

PATCH New Daniel Hellstrom 2 participants 2 messages Mar 13, 2008

lore
Share & tools
lore

Daniel Hellstrom

author
#0 lore raw

PATCH 4/8 SPARC: Added SPARC board information to bdinfo command

This patch adds support for the U-Boot command 'bdinfo' for SPARC boards, the output is as shown below.

######################
U-Boot 1.3.2-gb42c95ff-dirty (Mar 12 2008 - 21:07:56)Gaisler GRSIM

CPU: LEON3
Board: GRSIM/TSIM
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   GRETH 10/100

Type "run flash_nfs" to mount root filesystem over NFS

Hit any key to stop autoboot: 0
=> bdinfo

memstart               = 0x40000000
memsize                = 0x04000000
flashstart             = 0x00000000
CFG_MONITOR_BASE       = 0x00000000
CFG_ENV_ADDR           = 0x007F8000
CFG_RELOC_MONITOR_BASE = 0x43f8e000 (262144)
CFG_MALLOC_BASE        = 0x43fce000 (131072)
CFG_INIT_SP_OFFSET     = 0x43ffdfe0 (65504)
CFG_PROM_OFFSET        = 0x43ffe000 (8064)
CFG_GBL_DATA_OFFSET    = 0x43ffff80 (128)
ethaddr                = 00:00:7A:CC:00:12
IP addr                = 192.168.0.80
baudrate               =  38400 bps

=>
######################

Best Regards,
Daniel Hellstrom

commit 6bc2ec61fd40610461266f6a7f21a01a4a47016c

Author: Daniel Hellstrom <[email protected]>
Date:   Wed Mar 12 21:16:14 2008 +0100

SPARC: added SPARC board information to the command bdinfo.

Signed-off-by Daniel Hellstrom <[email protected]>
 common/cmd_bdinfo.c |   34 ++++++++++++++++++++++++++++++++++
 1 files changed, 34 insertions(+), 0 deletions(-)
common/cmd_bdinfo.c +0 -0
index bbb0192..838c103 100644
@@ -208,6 +208,40 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int

argc, char *argv[])

     return 0;

}

+#elif defined(CONFIG_SPARC) /* SPARC */
+int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{
+ bd_t *bd = gd->bd;
+#if defined(CONFIG_CMD_NET)
+ int i;
+#endif
+
+#ifdef DEBUG
+ print_num ("bd address ",(ulong)bd);
+#endif

+    print_num ("memstart               ",bd->bi_memstart);
+    print_num ("memsize                ",bd->bi_memsize);
+    print_num ("flashstart             ",bd->bi_flashstart);
+    print_num ("CFG_MONITOR_BASE       ",CFG_MONITOR_BASE);
+    print_num ("CFG_ENV_ADDR           ",CFG_ENV_ADDR);
+    printf ("CFG_RELOC_MONITOR_BASE = 0x%lx

(%d)\n",CFG_RELOC_MONITOR_BASE,CFG_MONITOR_LEN);
+ printf ("CFG_MALLOC_BASE = 0x%lx
(%d)\n",CFG_MALLOC_BASE,CFG_MALLOC_LEN);
+ printf ("CFG_INIT_SP_OFFSET = 0x%lx
(%d)\n",CFG_INIT_SP_OFFSET,CFG_STACK_SIZE);
+ printf ("CFG_PROM_OFFSET = 0x%lx
(%d)\n",CFG_PROM_OFFSET,CFG_PROM_SIZE);
+ printf ("CFG_GBL_DATA_OFFSET = 0x%lx
(%d)\n",CFG_GBL_DATA_OFFSET,CFG_GBL_DATA_SIZE);
+
+#if defined(CONFIG_CMD_NET)
+ puts ("ethaddr =");
+ for (i=0; i<6; ++i) {
+ printf ("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]);

+    }
+    puts ("\nIP addr                = ");
+    print_IPaddr (bd->bi_ip_addr);

+#endif
+ printf ("\nbaudrate = %6ld bps\n", bd->bi_baudrate );
+ return 0;
+}
+
#elif defined(CONFIG_M68K) /* M68K */ static void print_str(const char *, const char *);

#1 lore raw

PATCH 4/8 SPARC: Added SPARC board information to bdinfo command

Quoted 2 lines · In message <[email protected]> you wrote:

This patch adds support for the U-Boot command 'bdinfo' for SPARC boards, the output is as shown below.

...

Quoted 30 lines
common/cmd_bdinfo.c +19 -0
index bbb0192..838c103 100644
@@ -208,6 +208,40 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int 
 argc, char *argv[])
     return 0;
 }
 
+#elif defined(CONFIG_SPARC)   /* SPARC */
+int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+    bd_t *bd = gd->bd;
+#if defined(CONFIG_CMD_NET)
+    int i;
+#endif
+
+#ifdef DEBUG
+    print_num ("bd address             ",(ulong)bd);
+#endif
+    print_num ("memstart               ",bd->bi_memstart);
+    print_num ("memsize                ",bd->bi_memsize);
+    print_num ("flashstart             ",bd->bi_flashstart);
+    print_num ("CFG_MONITOR_BASE       ",CFG_MONITOR_BASE);
+    print_num ("CFG_ENV_ADDR           ",CFG_ENV_ADDR);
+    printf ("CFG_RELOC_MONITOR_BASE = 0x%lx 
 (%d)\n",CFG_RELOC_MONITOR_BASE,CFG_MONITOR_LEN);
+    printf ("CFG_MALLOC_BASE        = 0x%lx 
 (%d)\n",CFG_MALLOC_BASE,CFG_MALLOC_LEN);
+    printf ("CFG_INIT_SP_OFFSET     = 0x%lx
Quoted 5 lines

(%d)\n",CFG_INIT_SP_OFFSET,CFG_STACK_SIZE);
+ printf ("CFG_PROM_OFFSET = 0x%lx
(%d)\n",CFG_PROM_OFFSET,CFG_PROM_SIZE);
+ printf ("CFG_GBL_DATA_OFFSET = 0x%lx
(%d)\n",CFG_GBL_DATA_OFFSET,CFG_GBL_DATA_SIZE);

The patch is line-wrapped and thus unusable, and you have again lots of coding style issues.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"The value of marriage is not that adults produce children, but  that
children produce adults."                            - Peter De Vries