SPARC: Added SPARC board information to bdinfo command
PATCH 2/13 SPARC: Added SPARC board information to bdinfo command
Hello Wolfgang,
This patch adds support for the U-Boot command 'bdinfo' for SPARC boards, the output is as shown below.
######################
U-Boot 1.3.2-00273-gf85e20a (Mar 28 2008 - 13:13:48)GAISLER LEON3 GR-XC3S-1500
CPU: LEON3
Board: GRSIM/TSIM
Using default environment
In: serial Out: serial Err: serial Net: GRETH 10/100
Type "run flash_nfs" to mount root filesystem over NFS
Hit any key to stop autoboot: 0
=> bdinfo
memstart = 0x40000000 memsize = 0x04000000 flashstart = 0x00000000 CFG_MONITOR_BASE = 0x00000000 CFG_ENV_ADDR = 0x007F8000 CFG_RELOC_MONITOR_BASE = 0x43f8e000 (262144) CFG_MALLOC_BASE = 0x43fce000 (131072) CFG_INIT_SP_OFFSET = 0x43ffdfe0 (65504) CFG_PROM_OFFSET = 0x43ffe000 (8064) CFG_GBL_DATA_OFFSET = 0x43ffff80 (128) ethaddr = 00:00:7A:CC:00:12 IP addr = 192.168.0.80 baudrate = 38400 bps
=>
######################
This patch is also available at
ftp://ftp.gaisler.com/gaisler.com/u-boot/patches.
Best Regards,
Daniel Hellstrom
common/cmd_bdinfo.c | 39 +++++++++++++++++++++++++++++++++++++++ 1 files changed, 39 insertions(+), 0 deletions(-)
common/cmd_bdinfo.c +0 -0
@@ -208,6 +208,45 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int
argc, char *argv[])
return 0;
}
+#elif defined(CONFIG_SPARC) /* SPARC */
+int do_bdinfo(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{
+ bd_t *bd = gd->bd;
+#if defined(CONFIG_CMD_NET)
+ int i;
+#endif
+
+#ifdef DEBUG
+ print_num("bd address ", (ulong) bd);
+#endif
+ print_num("memstart ", bd->bi_memstart);
+ print_num("memsize ", bd->bi_memsize);
+ print_num("flashstart ", bd->bi_flashstart);
+ print_num("CFG_MONITOR_BASE ", CFG_MONITOR_BASE);
+ print_num("CFG_ENV_ADDR ", CFG_ENV_ADDR);
+ printf("CFG_RELOC_MONITOR_BASE = 0x%lx (%d)\n", CFG_RELOC_MONITOR_BASE,+ CFG_MONITOR_LEN);
+ printf("CFG_MALLOC_BASE = 0x%lx (%d)\n", CFG_MALLOC_BASE,
+ CFG_MALLOC_LEN);
+ printf("CFG_INIT_SP_OFFSET = 0x%lx (%d)\n", CFG_INIT_SP_OFFSET,
+ CFG_STACK_SIZE);
+ printf("CFG_PROM_OFFSET = 0x%lx (%d)\n", CFG_PROM_OFFSET,
+ CFG_PROM_SIZE);
+ printf("CFG_GBL_DATA_OFFSET = 0x%lx (%d)\n", CFG_GBL_DATA_OFFSET,
+ CFG_GBL_DATA_SIZE);
+
+#if defined(CONFIG_CMD_NET)
+ puts("ethaddr =");
+ for (i = 0; i < 6; ++i) {
+ printf("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]);
+ }
+ puts("\nIP addr = ");
+ print_IPaddr(bd->bi_ip_addr);+#endif
+ printf("\nbaudrate = %6ld bps\n", bd->bi_baudrate);
+ return 0;
+}
+
#elif defined(CONFIG_M68K) /* M68K */ static void print_str(const char *, const char *);
PATCH 2/13 SPARC: Added SPARC board information to bdinfo command
Dear Daniel,
Quoted 3 lines · in message <[email protected]> you wrote:
This patch adds support for the U-Boot command 'bdinfo' for SPARC boards, the output is as shown below.
Sorry, this patch like all your others are corrupted by line-wrapping:
common/cmd_bdinfo.c int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int · line 208
Quoted 5 lines
index bbb0192..731c1d2 100644
common/cmd_bdinfo.c +0
-0@@ -208,6 +208,45 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
^^^^^^^^^^^^^^^^^^^^^^^
See here.
Do not use Mozilla Thunderbird to send such patches. Please use git-send-mail because that prevents exactly such problems.
All patches rejected, because they are brokend by wrapped lines.
Sorry.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de There's an old story about the person who wished his computer were as easy to use as his telephone. That wish has come true, since I no longer know how to use my telephone.