WARNING: at ieee80211_rate.h:155

Hi,

I got this. Maybe it's an ath5k bug, just in case you saw it already, don't you know what could be wrong here?

rate_control_pid_rate_init: 0 2462
PUJ: 0 12 00000000

------------[ cut here ]------------
WARNING: at /home/l/latest/xxx/net/mac80211/ieee80211_rate.h:155 rate_control_pid_rate_init+0x90/0xc0 [mac80211]()
Modules linked in: ath5k mac80211 nls_cp437 vfat fat usb_storage tun bitrev ipv6 test arc4 ecb crypto_blkcipher cryptomgr crypto_algapi usbhid crc32 sr_mod hid rtc_cmos cfg80211 ohci1394 rtc_core floppy ieee1394 ehci_hcd ff_memless cdrom rtc_lib [last unloaded: mac80211]

Pid: 0, comm: swapper Not tainted 2.6.25-rc8-mm1_64lock #6

Call Trace:
 <IRQ>  [<ffffffff8022fdef>] warn_on_slowpath+0x5f/0x80
 [<ffffffff80230ff7>] ? printk+0x67/0x70
 [<ffffffff80328108>] ? __spin_lock_init+0x38/0x70
 [<ffffffffa0090c9b>] ? :mac80211:sta_info_alloc+0x1ab/0x210
 [<ffffffffa00a2c50>] :mac80211:rate_control_pid_rate_init+0x90/0xc0
 [<ffffffffa0093023>] :mac80211:ieee80211_ibss_add_sta+0xe3/0x140
 [<ffffffff80228698>] ? try_to_wake_up+0x88/0x130
 [<ffffffffa009ceb0>] :mac80211:__ieee80211_rx_handle_packet+0x420/0x800
 [<ffffffffa009f106>] ? :mac80211:__ieee80211_rx+0x76/0x5c0
 [<ffffffffa009f106>] ? :mac80211:__ieee80211_rx+0x76/0x5c0
 [<ffffffffa009f372>] :mac80211:__ieee80211_rx+0x2e2/0x5c0
 [<ffffffffa0146a15>] :ath5k:ath5k_tasklet_rx+0x105/0x5f0
 [<ffffffff80236077>] tasklet_action+0x67/0xf0
 [<ffffffff80235f04>] __do_softirq+0x84/0x110
 [<ffffffff8020c8cc>] call_softirq+0x1c/0x30
 [<ffffffff8020e5f5>] do_softirq+0x65/0xa0
 [<ffffffff80235e75>] irq_exit+0x95/0xa0
 [<ffffffff8020e6e9>] do_IRQ+0x89/0x100
 [<ffffffff8020a420>] ? default_idle+0x0/0x80
 [<ffffffff8020bbc6>] ret_from_intr+0x0/0xf
 <EOI>  [<ffffffff8020a463>] ? default_idle+0x43/0x80
 [<ffffffff8020a461>] ? default_idle+0x41/0x80
 [<ffffffff8020a420>] ? default_idle+0x0/0x80
 [<ffffffff8020a4e7>] ? cpu_idle+0x47/0xd0
 [<ffffffff804da4ce>] ? start_secondary+0x2fe/0x430

---[ end trace 9dbdd8f4f112ff0b ]---

wlan0: Trigger new scan to find an IBSS to join
wlan0: Trigger new scan to find an IBSS to join
wlan0: no IPv6 routers present
wlan0: Trigger new scan to find an IBSS to join
wlan0: Creating new IBSS network, BSSID f6:ae:b9:e2:70:1f
phy1: Removed STA
...
wlan0: Configured IBSS beacon template
ieee80211_sta_join_ibss: 00000fff rates

It's
printk(KERN_DEBUG "PUJ: %u %u %.8llx\n", sband->band, sband->n_bitrates,

                     sta->supp_rates[sband->band]);
right before the WARN_ON. And this
printk(KERN_DEBUG "%s: %u %u\n", __func__, local->hw.conf.channel->band,
                     local->hw.conf.channel->center_freq);

in rate_control_pid_rate_init.

00000fff means which rates were set to ifsta->supp_rates_bits[local->hw.conf.channel->band]
The problem here is that it is after receiving a frame which caused the warning.

Thanks.