OMAP2430: Add missing defines for TWL4030
PATCH 1/1 OMAP2430: Add missing defines for TWL4030
From: Carlos Eduardo Aguiar <[email protected]>
This patch adds missing defines for TWL4030.
Signed-off-by Francisco Alecrim <[email protected]>
Signed-off-by Carlos Eduardo Aguiar <[email protected]>
--- include/asm-arm/arch-omap/board-2430osk.h | 15 +++++++++++++-- include/asm-arm/arch-omap/board-2430sdp.h | 15 +++++++++++++-- 2 files changed, 26 insertions(+), 4 deletions(-)
include/asm-arm/arch-omap/board-2430osk.h +13 -2
@@ -33,15 +33,26 @@#define OMAP24XX_ETHR_START 0x08000300#define OMAP24XX_ETHR_GPIO_IRQ 149 +#ifdef CONFIG_TWL4030_CORE +#define TWL4030_IRQNUM INT_24XX_SYS_NIRQ/* TWL4030 Primary Interrupt Handler (PIH) interrupts */ #define IH_TWL4030_BASE IH_BOARD_BASE#define IH_TWL4030_END (IH_TWL4030_BASE+8) +#define IH_TWL4030_PWRBASE (IH_TWL4030_END) +#define IH_TWL4030_PWRBASE_END (IH_TWL4030_PWRBASE+8) + +#ifdef CONFIG_TWL4030_GPIO +/* TWL4030 GPIO Interrupts */ -#define IH_TWL4030_GPIO_BASE (IH_TWL4030_END) -#define IH_TWL4030_GPIO_END (IH_TWL4030_BASE+18) +#define IH_TWL4030_GPIO_BASE (IH_TWL4030_PWRBASE_END) +#define IH_TWL4030_GPIO_END (IH_TWL4030_GPIO_BASE+18)#define NR_IRQS (IH_TWL4030_GPIO_END) +#else +#define NR_IRQS (IH_TWL4030_PWRBASE_END) +#endif /* CONFIG_I2C_TWL4030_GPIO */ +#endif /* End of support for TWL4030 */ #endif /* __ASM_ARCH_OMAP_2430OSK_H */
include/asm-arm/arch-omap/board-2430sdp.h +13 -2
@@ -34,16 +34,27 @@#define OMAP24XX_ETHR_GPIO_IRQ 149#define SDP2430_CS0_BASE 0x04000000 +#ifdef CONFIG_TWL4030_CORE +#define TWL4030_IRQNUM INT_24XX_SYS_NIRQ/* TWL4030 Primary Interrupt Handler (PIH) interrupts */ #define IH_TWL4030_BASE IH_BOARD_BASE#define IH_TWL4030_END (IH_TWL4030_BASE+8) +#define IH_TWL4030_PWRBASE (IH_TWL4030_END) +#define IH_TWL4030_PWRBASE_END (IH_TWL4030_PWRBASE+8) + +#ifdef CONFIG_TWL4030_GPIO +/* TWL4030 GPIO Interrupts */ -#define IH_TWL4030_GPIO_BASE (IH_TWL4030_END) -#define IH_TWL4030_GPIO_END (IH_TWL4030_BASE+18) +#define IH_TWL4030_GPIO_BASE (IH_TWL4030_PWRBASE_END) +#define IH_TWL4030_GPIO_END (IH_TWL4030_GPIO_BASE+18)#define NR_IRQS (IH_TWL4030_GPIO_END) +#else +#define NR_IRQS (IH_TWL4030_PWRBASE_END) +#endif /* CONFIG_I2C_TWL4030_GPIO */ +#endif /* End of support for TWL4030 */ /* Function prototypes */ extern void sdp2430_flash_init (void );
-- 1.5.3.GIT
Quoted 3 lines · Carlos Aguiar
From: Carlos Eduardo Aguiar <[email protected]>
This patch adds missing defines for TWL4030.
I've pushed this. We should fix the defines, as it now looks like this will again break efforts of building multiple omaps into the same kernel. Basically the same things need to be defined in just one common place.
Tony
Quoted 76 lines
Signed-off-by Francisco Alecrim <[email protected]>Signed-off-by Carlos Eduardo Aguiar <[email protected]>--- include/asm-arm/arch-omap/board-2430osk.h | 15 +++++++++++++-- include/asm-arm/arch-omap/board-2430sdp.h | 15 +++++++++++++-- 2 files changed, 26 insertions(+), 4 deletions(-)include/asm-arm/arch-omap/board-2430osk.h +13
-2@@ -33,15 +33,26 @@#define OMAP24XX_ETHR_START 0x08000300#define OMAP24XX_ETHR_GPIO_IRQ 149 +#ifdef CONFIG_TWL4030_CORE +#define TWL4030_IRQNUM INT_24XX_SYS_NIRQ/* TWL4030 Primary Interrupt Handler (PIH) interrupts */ #define IH_TWL4030_BASE IH_BOARD_BASE#define IH_TWL4030_END (IH_TWL4030_BASE+8) +#define IH_TWL4030_PWRBASE (IH_TWL4030_END) +#define IH_TWL4030_PWRBASE_END (IH_TWL4030_PWRBASE+8) + +#ifdef CONFIG_TWL4030_GPIO +/* TWL4030 GPIO Interrupts */ -#define IH_TWL4030_GPIO_BASE (IH_TWL4030_END) -#define IH_TWL4030_GPIO_END (IH_TWL4030_BASE+18) +#define IH_TWL4030_GPIO_BASE (IH_TWL4030_PWRBASE_END) +#define IH_TWL4030_GPIO_END (IH_TWL4030_GPIO_BASE+18)#define NR_IRQS (IH_TWL4030_GPIO_END) +#else +#define NR_IRQS (IH_TWL4030_PWRBASE_END) +#endif /* CONFIG_I2C_TWL4030_GPIO */ +#endif /* End of support for TWL4030 */ #endif /* __ASM_ARCH_OMAP_2430OSK_H */ include/asm-arm/arch-omap/board-2430sdp.h +13
-3@@ -34,16 +34,27 @@#define OMAP24XX_ETHR_GPIO_IRQ 149#define SDP2430_CS0_BASE 0x04000000 +#ifdef CONFIG_TWL4030_CORE +#define TWL4030_IRQNUM INT_24XX_SYS_NIRQ/* TWL4030 Primary Interrupt Handler (PIH) interrupts */ #define IH_TWL4030_BASE IH_BOARD_BASE#define IH_TWL4030_END (IH_TWL4030_BASE+8) +#define IH_TWL4030_PWRBASE (IH_TWL4030_END) +#define IH_TWL4030_PWRBASE_END (IH_TWL4030_PWRBASE+8) + +#ifdef CONFIG_TWL4030_GPIO +/* TWL4030 GPIO Interrupts */ -#define IH_TWL4030_GPIO_BASE (IH_TWL4030_END) -#define IH_TWL4030_GPIO_END (IH_TWL4030_BASE+18) +#define IH_TWL4030_GPIO_BASE (IH_TWL4030_PWRBASE_END) +#define IH_TWL4030_GPIO_END (IH_TWL4030_GPIO_BASE+18)#define NR_IRQS (IH_TWL4030_GPIO_END) +#else +#define NR_IRQS (IH_TWL4030_PWRBASE_END) +#endif /* CONFIG_I2C_TWL4030_GPIO */ +#endif /* End of support for TWL4030 */ /* Function prototypes */ extern void sdp2430_flash_init (void ); -- 1.5.3.GIT