Skip to contentSkip to conversation

add MPC8343 based board mvBlueLYNX-M7 aka mvblm7

PATCH New Andre Schwarz 3 participants 5 messages Apr 9, 2008 – Apr 10, 2008 Kbuild

lore
Share & tools
lore

Andre Schwarz

author
#0 lore raw

PATCH 1/1 add MPC8343 based board mvBlueLYNX-M7 aka mvblm7

MPC8343 based stereo camera system with Cyclone-II FPGA and miniPCI Slot. CPU utilizes dual 10/100/1000 Ethernet using Vitesse VSC8601 RGMII Phys and USB over ULPI.
512MB Micron DDR-II memory, 8MB Flash on LocalBus, SD over SPU and 32MB NAND @ FPGA.

Signed-off-by Andre Schwarz <[email protected]>

--

CREDITS +5 -0
index e84ef38..713f58a 100644
@@ -424,6 +424,11 @@ N: Paolo Scaffardi
 E: arsenio at tin.it
 D: FADS823 configuration, MPC823 video support, I2C, wireless keyboard, lots more
 
+N: Andre Schwarz
+E: andre.schwarz at matrix-vision.de
+D: Support for BlueLYNX and BlueCOUGAR series
+W: www.matrix-vision.com
+
 N: Robert Schwebel
 E: r.schwebel at pengutronix.de
 D: Support for csb226, logodl and innokom boards (PXA2xx)
MAKEALL +1 -0
index 2a872ac..f21c34e 100755
@@ -327,6 +327,7 @@ LIST_83xx="		\
 	MPC8360ERDK_66	\
 	MPC837XEMDS	\
 	MPC837XERDB	\
+	MVBLM7		\
 	sbc8349		\
 	TQM834x		\
 "
Makefile +3 -0
index a7f886b..3f217fe 100644
@@ -2084,6 +2084,9 @@ sbc8349_config:		unconfig
 TQM834x_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x
 
+MVBLM7_config: unconfig
+	@$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7
+
 
 #########################################################################
 ## MPC85xx Systems
board/mvblm7/Makefile new file +48 -0

48 lines not on this page · raw message

board/mvblm7/config.mk new file +29 -0
new file mode 100644
index 0000000..a659203
@@ -0,0 +1,29 @@
+#
+# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# MPC8349E-mITX and MPC8349E-mITX-GP
+#
+
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+TEXT_BASE  = 0xFFF00000
board/mvblm7/fpga.c new file +185 -0

185 lines not on this page · raw message

board/mvblm7/fpga.h new file +34 -0
new file mode 100644
index 0000000..e84ff06
@@ -0,0 +1,34 @@
+/*
+ * (C) Copyright 2002
+ * Rich Ireland, Enterasys Networks, rireland at enterasys.com.
+ * Keith Outwater, [email protected].
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+extern int mvblm7_init_fpga(void);
+
+extern int fpga_pgm_fn(int assert_pgm, int flush, int cookie);
+extern int fpga_status_fn (int cookie);
+extern int fpga_config_fn (int assert, int flush, int cookie);
+extern int fpga_done_fn(int cookie);
+extern int fpga_clk_fn(int assert_clk, int flush, int cookie);
+extern int fpga_wr_fn (void *buf, size_t len, int flush, int cookie);
+extern int fpga_null_fn (int cookie);
board/mvblm7/mvblm7.c new file +128 -0

128 lines not on this page · raw message

board/mvblm7/mvblm7.h new file +20 -0
new file mode 100644
index 0000000..eb1d2a3
@@ -0,0 +1,20 @@
+#ifndef __MVBC_H__
+#define __MVBC_H__
+
+#define MV_GPIO
+
+#define FPGA_DIN        0x20000000
+#define FPGA_CCLK       0x40000000
+#define FPGA_CONF_DONE  0x08000000
+#define FPGA_CONFIG     0x80000000
+#define FPGA_STATUS     0x10000000
+
+#define MAN_RST         0x00100000
+#define WD_TS           0x00200000
+#define WD_WDI          0x00400000
+
+#define MV_GPIO_DAT	(WD_TS)
+#define MV_GPIO_OUT	(FPGA_DIN|FPGA_CCLK|WD_TS|WD_WDI)
+#define MV_GPIO_ODE	(FPGA_CONFIG|MAN_RST)
+
+#endif
board/mvblm7/mvblm7_autoscript new file +38 -0
new file mode 100644
index 0000000..8ebb4ca
@@ -0,0 +1,38 @@
+echo
+echo "==== running autoscript ===="
+echo
+setenv bootdtb bootm \${kernel_boot} \${mv_initrd_addr_ram} \${mv_dtb_addr_ram}
+setenv ramkernel setenv kernel_boot \${mv_kernel_addr_ram}
+setenv flashkernel setenv kernel_boot \${mv_kernel_addr}
+setenv cpinitrd cp \${mv_initrd_addr} \${mv_initrd_addr_ram} \${mv_initrd_length}
+setenv bootfromflash run flashkernel cpinitrd ramparam 
+setenv getdtb tftp \${mv_dtb_addr_ram} \${dtb_name}
+setenv cpdtb cp \${mv_dtb_addr} \${mv_dtb_addr_ram} 0x2000
+setenv rundtb fdt addr \${mv_dtb_addr_ram}\;fdt boardsetup\;fdt print
+setenv bootfromnet tftp \${mv_initrd_addr_ram} \${initrd_name}\;run ramkernel
+setenv addcons setenv bootargs \${bootargs} console=ttyS\${console_nr},\${baudrate}N8
+setenv set_static_ip setenv ipaddr \${static_ipaddr}
+setenv set_static_nm setenv netmask \${static_netmask}
+setenv set_static_gw setenv gatewayip \${static_gateway}
+setenv set_ip setenv ip \${ipaddr}::\${gatewayip}:\${netmask}
+setenv ramparam setenv bootargs root=/dev/ram ro rootfstype=squashfs
+if test ${autoscr_boot} != no;
+then
+  if test ${netboot} = yes;
+  then
+    bootp
+    if test $? = 0;
+    then
+      echo "=== bootp succeeded -> netboot ==="
+      run set_ip
+      run getdtb rundtb bootfromnet ramparam bootdtb
+    else
+      echo "=== netboot failed ==="
+    fi
+  fi
+  run set_static_ip set_static_nm set_static_gw set_ip
+  echo "=== bootfromflash ==="
+  run cpdtb rundtb bootfromflash
+else
+  echo "=== boot stopped with autoscr_boot no ==="
+fi
board/mvblm7/pci.c new file +264 -0

264 lines not on this page · raw message

include/configs/MVBLM7.h new file +467 -0

467 lines not on this page · raw message

MATRIX VISION GmbH, Talstra?e 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090 Gesch?ftsf?hrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner

#1 lore raw

PATCH 1/1 add MPC8343 based board mvBlueLYNX-M7 aka mvblm7

Quoted 8 lines · On Wed, 09 Apr 2008 16:16:28 +0200 Andre Schwarz…

MPC8343 based stereo camera system with Cyclone-II FPGA and miniPCI Slot. CPU utilizes dual 10/100/1000 Ethernet using Vitesse VSC8601 RGMII Phys and USB over ULPI.
512MB Micron DDR-II memory, 8MB Flash on LocalBus, SD over SPU and 32MB NAND @ FPGA.

Signed-off-by Andre Schwarz <[email protected]>

--

Wolfgang, I believe the window for new board support is closed; would you rather I maintain this on a "next" branch on mpc83xx, or are you willing to let this in for 1.3.3?

Andre, thanks for the new board contribution - please include diffstats in your patches.

Quoted 33 lines
CREDITS +5 -0
index e84ef38..713f58a 100644
@@ -424,6 +424,11 @@ N: Paolo Scaffardi
 E: arsenio at tin.it
 D: FADS823 configuration, MPC823 video support, I2C, wireless keyboard, lots more
 
+N: Andre Schwarz
+E: andre.schwarz at matrix-vision.de
+D: Support for BlueLYNX and BlueCOUGAR series
+W: www.matrix-vision.com
+
 N: Robert Schwebel
 E: r.schwebel at pengutronix.de
 D: Support for csb226, logodl and innokom boards (PXA2xx)
MAKEALL +1 -0
index 2a872ac..f21c34e 100755
@@ -327,6 +327,7 @@ LIST_83xx="		\
 	MPC8360ERDK_66	\
 	MPC837XEMDS	\
 	MPC837XERDB	\
+	MVBLM7		\
 	sbc8349		\
 	TQM834x		\
 "
Makefile +0 -0
index a7f886b..3f217fe 100644

Makefile sbc8349_config: unconfig · line 2089

Quoted 6 lines
Makefile +3 -0
@@ -2084,6 +2084,9 @@ sbc8349_config:		unconfig
 TQM834x_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x
 
+MVBLM7_config: unconfig
+	@$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7
+

I believe intra-family targets are kept in alpha order in the Makefile (as you did in MAKEALL).

please add a MAINTAINERS entry. A doc/README.mvblm7 would be nice.

<snip>

Quoted 5 lines
board/mvblm7/config.mk new file +0 -0
new file mode 100644
index 0000000..a659203

<snip>

board/mvblm7/config.mk line 25

Quoted 3 lines
board/mvblm7/config.mk new file +3 -0
+#
+# MPC8349E-mITX and MPC8349E-mITX-GP
+#

I'd leave this out :)

Quoted 9 lines
board/mvblm7/config.mk new file +4 -0
+
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+TEXT_BASE  = 0xFFF00000
board/mvblm7/fpga.c new file +0 -0
new file mode 100644
index 0000000..d286ef1

<snip>

Quoted 1 line

+#if (CONFIG_FPGA)

#if defined?

<snip>

Quoted 1 line

+int mvblm7_init_fpga (void)

we don't put spaces between function name and open parenthesis, do we?

All your functions are like this.

board/mvblm7/fpga.c line 65

Quoted 2 lines
board/mvblm7/fpga.c new file +2 -0
+{
+	DECLARE_GLOBAL_DATA_PTR;

this needs to be put somewhere global.

Quoted 9 lines
board/mvblm7/fpga.c new file +9 -0
+
+	fpga_debug("%s:%d: Initialize FPGA interface (relocation offset = 0x%.8lx)\n",
+		__FUNCTION__, __LINE__, gd->reloc_off);
+	fpga_init (gd->reloc_off);
+
+	fpga_debug("%s:%d: Adding fpga 0\n", __FUNCTION__, __LINE__);
+	fpga_add (fpga_altera, &cyclone2);
+	return 1;
+}

board/mvblm7/fpga.c line 84

Quoted 10 lines
board/mvblm7/fpga.c new file +10 -0
+
+int fpga_null_fn (int cookie)
+{
+        return 0;
+}
+
+int fpga_config_fn (int assert, int flush, int cookie)
+{
+        volatile immap_t        *im = (volatile immap_t *)CFG_IMMR;
+        volatile gpio83xx_t	*gpio = (volatile gpio83xx_t *)&im->gpio[0];

fix indentation; use tabs, not spaces.

board/mvblm7/fpga.c

Quoted 2 lines
board/mvblm7/fpga.c new file +2 -0
+
+	u32 dvo = gpio->dat;

keep declarations together, leave blank space between declarations and code - i.e, mv above blank line to before this line:

board/mvblm7/fpga.c line 88

Quoted 2 lines
board/mvblm7/fpga.c new file +2 -0
+	fpga_debug("SET config : %s\n", assert ? "low" : "high");
+	if ( assert )

no spaces around assert

board/mvblm7/fpga.c line 95

Quoted 7 lines
board/mvblm7/fpga.c new file +7 -0
+		dvo |= FPGA_CONFIG;
+	else 
+		dvo &= ~FPGA_CONFIG;
+	
+	if ( flush )
+		gpio->dat = dvo;
+	return assert;

can you also get in the habit of leaving blank lines before return statements? thanks.

<snipped more code that gets above comments also>

board/mvblm7/fpga.c line 156

Quoted 1 line
board/mvblm7/fpga.c new file +1 -0
+	for ( i=0; i<8; i++ ) {

please read CodingStyle! this should look like:

for (i = 0; i < 8; i++) {

<snip similar cases>

Quoted 1 line
board/mvblm7/mvblm7.c +0 -0

<snip>

board/mvblm7/mvblm7.c line 63

Quoted 2 lines
board/mvblm7/mvblm7.c +2 -0
+        im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+        im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;

use tabs, not spaces.

<snip>

Quoted 1 line

+u8 *dhcp_vendorex_prep (u8 * e)

u8 *dhcp_vendorex_prep(u8 *e)

board/mvblm7/mvblm7.c line 98

Quoted 5 lines
board/mvblm7/mvblm7.c +5 -0
+{
+    char *ptr;
+
+/* DHCP vendor-class-identifier = 60 */
+    if ((ptr = getenv ("dhcp_vendor-class-identifier"))) {

fix indentation. Use tabs, not spaces.

board/mvblm7/mvblm7.c

Quoted 2 lines
board/mvblm7/mvblm7.c +2 -0
+        *e++ = 60;
+        *e++ = strlen (ptr);

strlen(ptr);

Quoted 5 lines
board/mvblm7/mvblm7.c +5 -0
+        while (*ptr)
+            *e++ = *ptr++;
+    }
+/* DHCP_CLIENT_IDENTIFIER = 61 */
+    if ((ptr = getenv ("dhcp_client_id"))) {

..

<snip>

board/mvblm7/pci.c

Quoted 1 line
board/mvblm7/pci.c +0 -0

<sniiiiip>

board/mvblm7/pci.c line 264

Quoted 7 lines
board/mvblm7/pci.c +7 -0
+			tmp[0] = cpu_to_be32(gd->pci_clk);
+			do_fixup_by_path(blob, path, "clock-frequency",
+				&tmp, sizeof(tmp[0]), 1);
+		}
+	}
+}
+#endif

please use generic 83xx pci code (cpu/mpc83xx/pci.c). See the mpc8313erdb board implementation for an example use-case.

Again, thanks for your contribution!

Kim

#2 lore raw

PATCH 1/1 add MPC8343 based board mvBlueLYNX-M7 aka mvblm7

Dear Kim,

Quoted 2 lines · in message <[email protected]> you wrote:

Wolfgang, I believe the window for new board support is closed; would

Correct.

Quoted 2 lines

you rather I maintain this on a "next" branch on mpc83xx, or are you willing to let this in for 1.3.3?

It's all new stuff, so it should go to "next".

Thanks.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"It is better to have tried and failed than to have  failed  to  try,
but the result's the same."                           - Mike Dennison
author
#4 lore raw

PATCH 1/1 add MPC8343 based board mvBlueLYNX-M7 aka mvblm7

In reply to Kim Phillips

Kim,

I'll fix all your issues mentioned below in the next days. We're not in a hurry. Getting the board into 1.3.3 is absolutely fine.

Thanks,
Andr?

Quoted 246 lines · Kim Phillips
Quoted 9 lines · On Wed, 09 Apr 2008 16:16:28 +0200 Andre Schwarz…

MPC8343 based stereo camera system with Cyclone-II FPGA and miniPCI Slot. CPU utilizes dual 10/100/1000 Ethernet using Vitesse VSC8601 RGMII Phys and USB over ULPI.
512MB Micron DDR-II memory, 8MB Flash on LocalBus, SD over SPU and 32MB NAND @ FPGA.

Signed-off-by Andre Schwarz <[email protected]>

--

Wolfgang, I believe the window for new board support is closed; would you rather I maintain this on a "next" branch on mpc83xx, or are you willing to let this in for 1.3.3?

Andre, thanks for the new board contribution - please include diffstats in your patches.

Quoted 33 lines
CREDITS +5 -0
index e84ef38..713f58a 100644
@@ -424,6 +424,11 @@ N: Paolo Scaffardi
 E: arsenio at tin.it
 D: FADS823 configuration, MPC823 video support, I2C, wireless keyboard, lots more
 
+N: Andre Schwarz
+E: andre.schwarz at matrix-vision.de
+D: Support for BlueLYNX and BlueCOUGAR series
+W: www.matrix-vision.com
+
 N: Robert Schwebel
 E: r.schwebel at pengutronix.de
 D: Support for csb226, logodl and innokom boards (PXA2xx)
MAKEALL +1 -0
index 2a872ac..f21c34e 100755
@@ -327,6 +327,7 @@ LIST_83xx="		\
 	MPC8360ERDK_66	\
 	MPC837XEMDS	\
 	MPC837XERDB	\
+	MVBLM7		\
 	sbc8349		\
 	TQM834x		\
 "
Makefile +0 -0
index a7f886b..3f217fe 100644

Makefile sbc8349_config: unconfig · line 2090

Quoted 7 lines
Makefile +3 -0
@@ -2084,6 +2084,9 @@ sbc8349_config:		unconfig
 TQM834x_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x
 
+MVBLM7_config: unconfig
+	@$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7
+

I believe intra-family targets are kept in alpha order in the Makefile (as you did in MAKEALL).

please add a MAINTAINERS entry. A doc/README.mvblm7 would be nice.

<snip>

Quoted 6 lines
board/mvblm7/config.mk new file +0 -0
new file mode 100644
index 0000000..a659203

<snip>

board/mvblm7/config.mk line 25

Quoted 4 lines
board/mvblm7/config.mk new file +3 -0
+#
+# MPC8349E-mITX and MPC8349E-mITX-GP
+#

I'd leave this out :)

Quoted 10 lines
board/mvblm7/config.mk new file +4 -0
+
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+TEXT_BASE  = 0xFFF00000
board/mvblm7/fpga.c new file +0 -0
new file mode 100644
index 0000000..d286ef1

<snip>

Quoted 2 lines

+#if (CONFIG_FPGA)

#if defined?

<snip>

Quoted 2 lines

+int mvblm7_init_fpga (void)

we don't put spaces between function name and open parenthesis, do we?

All your functions are like this.

board/mvblm7/fpga.c line 65

Quoted 3 lines
board/mvblm7/fpga.c new file +2 -0
+{
+	DECLARE_GLOBAL_DATA_PTR;

this needs to be put somewhere global.

Quoted 10 lines
board/mvblm7/fpga.c new file +9 -0
+
+	fpga_debug("%s:%d: Initialize FPGA interface (relocation offset = 0x%.8lx)\n",
+		__FUNCTION__, __LINE__, gd->reloc_off);
+	fpga_init (gd->reloc_off);
+
+	fpga_debug("%s:%d: Adding fpga 0\n", __FUNCTION__, __LINE__);
+	fpga_add (fpga_altera, &cyclone2);
+	return 1;
+}

board/mvblm7/fpga.c line 84

Quoted 10 lines
board/mvblm7/fpga.c new file +10 -0
+
+int fpga_null_fn (int cookie)
+{
+        return 0;
+}
+
+int fpga_config_fn (int assert, int flush, int cookie)
+{
+        volatile immap_t        *im = (volatile immap_t *)CFG_IMMR;
+        volatile gpio83xx_t	*gpio = (volatile gpio83xx_t *)&im->gpio[0];

fix indentation; use tabs, not spaces.

board/mvblm7/fpga.c

Quoted 3 lines
board/mvblm7/fpga.c new file +2 -0
+
+	u32 dvo = gpio->dat;

keep declarations together, leave blank space between declarations and code - i.e, mv above blank line to before this line:

board/mvblm7/fpga.c line 88

Quoted 3 lines
board/mvblm7/fpga.c new file +2 -0
+	fpga_debug("SET config : %s\n", assert ? "low" : "high");
+	if ( assert )

no spaces around assert

board/mvblm7/fpga.c line 95

Quoted 8 lines
board/mvblm7/fpga.c new file +7 -0
+		dvo |= FPGA_CONFIG;
+	else 
+		dvo &= ~FPGA_CONFIG;
+	
+	if ( flush )
+		gpio->dat = dvo;
+	return assert;

can you also get in the habit of leaving blank lines before return statements? thanks.

<snipped more code that gets above comments also>

board/mvblm7/fpga.c line 156

Quoted 2 lines
board/mvblm7/fpga.c new file +1 -0
+	for ( i=0; i<8; i++ ) {

please read CodingStyle! this should look like:

for (i = 0; i < 8; i++) {

<snip similar cases>

Quoted 2 lines
board/mvblm7/mvblm7.c +0 -0

<snip>

board/mvblm7/mvblm7.c line 63

Quoted 3 lines
board/mvblm7/mvblm7.c +2 -0
+        im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+        im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;

use tabs, not spaces.

<snip>

Quoted 2 lines

+u8 *dhcp_vendorex_prep (u8 * e)

u8 *dhcp_vendorex_prep(u8 *e)

board/mvblm7/mvblm7.c line 98

Quoted 6 lines
board/mvblm7/mvblm7.c +5 -0
+{
+    char *ptr;
+
+/* DHCP vendor-class-identifier = 60 */
+    if ((ptr = getenv ("dhcp_vendor-class-identifier"))) {

fix indentation. Use tabs, not spaces.

board/mvblm7/mvblm7.c

Quoted 3 lines
board/mvblm7/mvblm7.c +2 -0
+        *e++ = 60;
+        *e++ = strlen (ptr);

strlen(ptr);

Quoted 6 lines
board/mvblm7/mvblm7.c +5 -0
+        while (*ptr)
+            *e++ = *ptr++;
+    }
+/* DHCP_CLIENT_IDENTIFIER = 61 */
+    if ((ptr = getenv ("dhcp_client_id"))) {

..

<snip>

board/mvblm7/pci.c

Quoted 2 lines
board/mvblm7/pci.c +0 -0

<sniiiiip>

board/mvblm7/pci.c line 264

Quoted 8 lines
board/mvblm7/pci.c +7 -0
+			tmp[0] = cpu_to_be32(gd->pci_clk);
+			do_fixup_by_path(blob, path, "clock-frequency",
+				&tmp, sizeof(tmp[0]), 1);
+		}
+	}
+}
+#endif

please use generic 83xx pci code (cpu/mpc83xx/pci.c). See the mpc8313erdb board implementation for an example use-case.

Quoted 4 lines

Again, thanks for your contribution!

Kim

MATRIX VISION GmbH, Talstra?e 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090 Gesch?ftsf?hrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20080410/8b954151/attachment.htm

author
#3 lore raw

PATCH 1/1 add MPC8343 based board mvBlueLYNX-M7 aka mvblm7

In reply to Wolfgang Denk

Wolfgang,

that's absolutely fine since there are some open issues regarding docs and coding style.
I didn't dare to believe getting the board in in the first run anyway ;-)

Sometimes the rules are a bit annoying - but they are definitely necessary !

Cheers,
Andr?

Quoted 14 lines · Wolfgang Denk

Dear Kim,

Quoted 2 lines · in message <[email protected]> you wrote:

Wolfgang, I believe the window for new board support is closed; would

Correct.

Quoted 3 lines

you rather I maintain this on a "next" branch on mpc83xx, or are you willing to let this in for 1.3.3?

Quoted 9 lines

It's all new stuff, so it should go to "next".

Thanks.

Best regards,

Wolfgang Denk

MATRIX VISION GmbH, Talstra?e 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090 Gesch?ftsf?hrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20080410/6c3f7efb/attachment.htm