Skip to contentSkip to conversation

: Analog/Digital output not working.

ALSA - driver 0000772 [email protected] 1 participant 1 message Jan 1, 2005

lore
Share & tools
lore
#0 lore raw

A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=772>
======================================================================
Reported By: ianw1234
Assigned To:
======================================================================

Project:                    ALSA - driver
Issue ID:                   772
Category:                   PCI - emu10k1
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     new
Distribution:               
Kernel Version:             2.6.9-1.681_FC3
======================================================================
Date Submitted:             12-31-2004 23:02 CET
Last Modified:              01-01-2005 22:48 CET

======================================================================
Summary: Analog/Digital output not working.
Description:
I've been unable to get my SB Live! to send analog pcm out through the Analog/Digital port. It's connected through this port to my receiver, and while AC3 over the digital port works fine, I can't get anything else to go over the line. I have a 48kHz wave file I've been testing, and I've tried playing it with aplay over hw0,0 (no good), hw0,1 (doesn't exist), and hw0,2 (no effect).

I have the master, IEC Coaxial, AC97, External amplifier, and SB Live Analog/Digital Output Jack all either unmuted or set to max volume. I've tried loading the snd_pcm_oss module with various snd_dsp_map settings without success.

I've tried this on 1.0.7 and 1.0.8rc1. I dimly remember this working in the past, so I don't know if this was broken in the upgrade to 1.0.7 (which I had to do because AC3 passthrough didn't work in the version that came with the 2.6.9 kernel) or whether I have some strange misconfiguration. Help is appreciated! Thanks!
======================================================================

----------------------------------------------------------------------
pzad - 01-01-05 10:01
----------------------------------------------------------------------
Try to play with "IEC958 Optical Raw" switch.

----------------------------------------------------------------------
ianw1234 - 01-01-05 22:48
----------------------------------------------------------------------
I've tried the IEC Optical Raw switch, and it made no difference when it was on or off.

So ALSA applications that let you specify the hardware device work fine, the problem is with OSS apps that aren't having their output directed to the digital out.. and I can't get any digital out if I specify a device in the form hw=x,x, so I don't know what I could specify to snd_dsp_map for the snd_pcm_oss module to redirect the sound that way. I guess my main complaint is that for the emu10k1 driver, the "SB Live Analog/Digital Output Jack" option doesn't seem to be doing anything.

Issue History
Date Modified Username Field Change
======================================================================

12-31-04 23:02 ianw1234       New Issue                                    
12-31-04 23:02 ianw1234       Kernel Version            => 2.6.9-1.681_FC3 
01-01-05 00:33 ianw1234       Note Added: 0003028                          
01-01-05 02:28 rlrevell       Note Added: 0003030                          
01-01-05 10:01 pzad           Note Added: 0003031                          
01-01-05 22:48 ianw1234       Note Added: 0003039                          

======================================================================

-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt