Skip to contentSkip to conversation

2.6.25 Kernel - Problems with capabilities

DISCUSSION David 6 participants 19 messages Apr 19, 2008 – Apr 22, 2008 1 message not in the archive

lore
Share & tools
lore

David

author
#0 lore raw

I'm wondering if anyone might be able to help with a capability problem I've noticed with .25 My ntp daemon will no longer run as any non-root user, and after some investigation it seems that calls to prctl() are failing.

CONFIG_SECURITY_CAPABILITIES=y , so this should work?

System is 32 bit x86 based on a venerable SuSE 9.1 distro.

Full .config is attached.

Thanks
David

author
#2 lore raw
In reply to a message not in the archive
Quoted 43 lines · Mike Galbraith
Quoted 13 lines · David

I'm wondering if anyone might be able to help with a capability problem I've noticed with .25 My ntp daemon will no longer run as any non-root user, and after some investigation it seems that calls to prctl() are failing.

CONFIG_SECURITY_CAPABILITIES=y , so this should work?

System is 32 bit x86 based on a venerable SuSE 9.1 distro.

Full .config is attached.

Thanks
David

FWIW, ntpd runs just fine here as user ntp on both my P4 and Q6600 boxen with opensuse 10.3.

marge:..tmp/linux-2.6.25 # grep SECUR .config
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4DEV_FS_SECURITY=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
# CONFIG_SECURITY_SELINUX is not set
marge:..tmp/linux-2.6.25 # grep SECUR /xx
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_XFS_SECURITY is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0

Quoted 4 lines

I notice I have CONFIG_SECURITY_FILE_CAPABILITIES set, and you don't. I have not even the foggiest clue whether that has anything to do with the price of tea in china though :)

I've just set

CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_SECURITY_NETWORK_XFRM=y

to no avail.. I still get

20 Apr 15:04:20 ntpd[15694]: cap_set_proc() failed to drop root privileges: Invalid argument

after rebuild & reboot. No massive deal, I'll just run ntpd as root for now, but there's definitely something funny going on.

Cheers
David

#3 lore raw
Quoted 7 lines · --- David
Quoted 6 lines · Mike Galbraith
Quoted 4 lines · David

I'm wondering if anyone might be able to help with a capability problem I've noticed with .25 My ntp daemon will no longer run as any non-root user, and after some investigation it seems that calls to prctl() are failing.

Do you have a libcap that reflects the change from 32 capabilities to 64? You'll be looking for libcap.so.2.06 or thereabouts.

Casey Schaufler
[email protected]

author
#4 lore raw
Quoted 3 lines · Casey Schaufler

Do you have a libcap that reflects the change from 32 capabilities to 64? You'll be looking for libcap.so.2.06 or thereabouts.

Adding libcap-2.08 and recompiling ntpd has fixed the issue, and I'm now running normally, thanks!

Was this userspace visible change planned in advance for 2.6.25 ? ... as I guess a few other people with venerable old userspace components may come across this issue.

Cheers
David

#5 lore raw
Quoted 6 lines · David
Quoted 3 lines · Casey Schaufler

Do you have a libcap that reflects the change from 32 capabilities to 64? You'll be looking for libcap.so.2.06 or thereabouts.

Adding libcap-2.08 and recompiling ntpd has fixed the issue, and I'm now running normally, thanks!

FWIW I ran into this problem too with systemtap. It was a quite nasty surprise and took some time to track down.

I also don't remember seeing a thread about this on l-k. Where was this major binary breakage discussed?

-Andi

#6 lore raw
Quoted 6 lines · --- Andi Kleen
Quoted 4 lines · David
Quoted 3 lines · Casey Schaufler

Do you have a libcap that reflects the change from 32 capabilities to 64? You'll be looking for libcap.so.2.06 or thereabouts.

Quoted 8 lines
Quoted 2 lines

Adding libcap-2.08 and recompiling ntpd has fixed the issue, and I'm now running normally, thanks!

FWIW I ran into this problem too with systemtap. It was a quite nasty surprise and took some time to track down.

I also don't remember seeing a thread about this on l-k. Where was this major binary breakage discussed?

lkml and lsm.

Casey Schaufler
[email protected]

#7 lore raw
Quoted 1 line

lkml and lsm.

Can you be more exact please? I skimmed the last 1k messages in the lsm archive and there was nothing standing out.

-Andi

#19 lore raw
In reply to David

(cc's added)

Quoted 68 lines · On Sun, 20 Apr 2008 15:09:11 +0100 David <[email protected]> wrote:
Quoted 46 lines · Mike Galbraith
Quoted 5 lines · David

I'm wondering if anyone might be able to help with a capability problem I've noticed with .25 My ntp daemon will no longer run as any non-root user, and after some investigation it seems that calls to prctl() are failing.

Quoted 11 lines

CONFIG_SECURITY_CAPABILITIES=y , so this should work?

System is 32 bit x86 based on a venerable SuSE 9.1 distro.

Full .config is attached.

Thanks
David

FWIW, ntpd runs just fine here as user ntp on both my P4 and Q6600 boxen with opensuse 10.3.

marge:..tmp/linux-2.6.25 # grep SECUR .config
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4DEV_FS_SECURITY=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
# CONFIG_SECURITY_SELINUX is not set
marge:..tmp/linux-2.6.25 # grep SECUR /xx
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_XFS_SECURITY is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0

Quoted 4 lines

I notice I have CONFIG_SECURITY_FILE_CAPABILITIES set, and you don't. I have not even the foggiest clue whether that has anything to do with the price of tea in china though :)

I've just set

CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_SECURITY_NETWORK_XFRM=y

to no avail.. I still get

20 Apr 15:04:20 ntpd[15694]: cap_set_proc() failed to drop root
privileges: Invalid argument

after rebuild & reboot. No massive deal, I'll just run ntpd as root for now, but there's definitely something funny going on.

Cheers
David

#8 lore raw
In reply to David
Quoted 6 lines · David
Quoted 3 lines · Casey Schaufler

Do you have a libcap that reflects the change from 32 capabilities to 64? You'll be looking for libcap.so.2.06 or thereabouts.

Adding libcap-2.08 and recompiling ntpd has fixed the issue, and I'm now running normally, thanks!

I don't understand why, though. Looking at the ntpd code (ntp-4.2.4p4) it just does a cap_set_proc(cap_from_text("X=epi")); It should simply be sending in the _LINUX_CAPABILITY_VERSION which shipped with libcap, which should have been _V1, and the kernel should honor that so long as you didn't try to send in caps > 31, which ntpd wasn't.

Quoted 6 lines

Was this userspace visible change planned in advance for 2.6.25 ? ... as I guess a few other people with venerable old userspace components may come across this issue.

Cheers
David

It's been in the works a long time and we thought we'd done pretty well with backward compatibility. I really don't see why you had that failure!

Do you know which version of libcap you had before?

thanks,
-serge

#9 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

[email protected] wrote:

| Quoting David ([email protected]):
|> Casey Schaufler wrote:
|>> Do you have a libcap that reflects the change from 32 capabilities
|>> to 64? You'll be looking for libcap.so.2.06 or thereabouts.
|>>
|> Adding libcap-2.08 and recompiling ntpd has fixed the issue, and I'm now
|> running normally, thanks!
|
| I don't understand why, though.  Looking at the ntpd code (ntp-4.2.4p4)
| it just does a cap_set_proc(cap_from_text("X=epi"));  It should simply
| be sending in the _LINUX_CAPABILITY_VERSION which shipped with libcap,
| which should have been _V1, and the kernel should honor that so long as
| you didn't try to send in caps > 31, which ntpd wasn't.
|
|> Was this userspace visible change planned in advance for 2.6.25 ? ...
as I
|> guess a few other people with venerable old userspace components may
come
|> across this issue.
|>
|> Cheers
|> David
|
| It's been in the works a long time and we thought we'd done pretty
| well with backward compatibility.  I really don't see why you had
| that failure!

I'm confused (and somewhat concerned) about this too. 32-bit capability apps should act fine. The only thing you might notice is a strange comment about it in /var/log/messages.

David, can you run strace on the failing program (configuration)?

[I'll see if I can read the complete thread on one of the archives and see if anything else sticks out.]

Thanks

Andrew

|
| Do you know which version of libcap you had before?
|
| thanks,
| -serge

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (Darwin)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFIC+NP+bHCR3gb8jsRAjunAKDXe/fDfwIJWi6wgtpdxZefbRq5SACffb1+ pQNi1C/8PPGWYpUXFxizUuI=
=LHl0
-----END PGP SIGNATURE-----

author
#11 lore raw
In reply to [email protected]

Quoting [email protected]:

Quoted 18 lines · David
Quoted 6 lines
Quoted 3 lines · Casey Schaufler

Do you have a libcap that reflects the change from 32 capabilities to 64? You'll be looking for libcap.so.2.06 or thereabouts.

Adding libcap-2.08 and recompiling ntpd has fixed the issue, and I'm now running normally, thanks!

I don't understand why, though. Looking at the ntpd code (ntp-4.2.4p4) it just does a cap_set_proc(cap_from_text("X=epi")); It should simply be sending in the _LINUX_CAPABILITY_VERSION which shipped with libcap, which should have been _V1, and the kernel should honor that so long as you didn't try to send in caps > 31, which ntpd wasn't.

Quoted 4 lines

Was this userspace visible change planned in advance for 2.6.25 ? ... as I guess a few other people with venerable old userspace components may come across this issue.

Quoted 8 lines
Quoted 2 lines

Cheers
David

It's been in the works a long time and we thought we'd done pretty well with backward compatibility. I really don't see why you had that failure!

Do you know which version of libcap you had before?

/lib/libcap.so.1 -> libcap.so.1.92

I guess that's 1.92 (should be the version shipped with SuSE 9.1).

Cheers
David

#12 lore raw
In reply to David R
Quoted 27 lines · David R

Quoting [email protected]:

Quoted 25 lines · David
Quoted 6 lines
Quoted 3 lines · Casey Schaufler

Do you have a libcap that reflects the change from 32 capabilities to 64? You'll be looking for libcap.so.2.06 or thereabouts.

Adding libcap-2.08 and recompiling ntpd has fixed the issue, and I'm now running normally, thanks!

I don't understand why, though. Looking at the ntpd code (ntp-4.2.4p4) it just does a cap_set_proc(cap_from_text("X=epi")); It should simply be sending in the _LINUX_CAPABILITY_VERSION which shipped with libcap, which should have been _V1, and the kernel should honor that so long as you didn't try to send in caps > 31, which ntpd wasn't.

Quoted 6 lines

Was this userspace visible change planned in advance for 2.6.25 ? ... as I guess a few other people with venerable old userspace components may come across this issue.

Cheers
David

It's been in the works a long time and we thought we'd done pretty well with backward compatibility. I really don't see why you had that failure!

Quoted 5 lines
Quoted 1 line

Do you know which version of libcap you had before?

/lib/libcap.so.1 -> libcap.so.1.92

I guess that's 1.92 (should be the version shipped with SuSE 9.1).

Ok, thanks, then it's definately not what I was thinking.

(Will wait to check out your strace)

thanks,
-serge

author
#13 lore raw
Quoted 10 lines · [email protected] wrote:
Quoted 5 lines

/lib/libcap.so.1 -> libcap.so.1.92

I guess that's 1.92 (should be the version shipped with SuSE 9.1).

Ok, thanks, then it's definately not what I was thinking.

(Will wait to check out your strace)

strace attached.

Cheers
David

execve("/usr/sbin/ntpd", ["ntpd", "-c", "/etc/ntp.conf", "-i", "/var/lib/ntp/", "-p", "/var/run/ntp/ntpd.pid", "-u", "ntp"], [/* 56 vars */]) = 0 uname({sys="Linux", node="server", ...}) = 0
brk(0) = 0x80f8000
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40017000
open("/etc/ld.so.preload", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=103028, ...}) = 0
old_mmap(NULL, 103028, PROT_READ, MAP_PRIVATE, 3, 0) = 0x40018000
close(3) = 0
open("/lib/tls/libm.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0p5\0\000"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=170563, ...}) = 0
old_mmap(NULL, 137712, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x40032000
madvise(0x40032000, 137712, MADV_SEQUENTIAL|0x1) = 0
old_mmap(0x40053000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x20000) = 0x40053000
close(3) = 0
open("/usr/lib/libcrypto.so.0.9.8", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\0b\3\000"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0555, st_size=1417403, ...}) = 0
old_mmap(NULL, 1223928, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x40054000
madvise(0x40054000, 1223928, MADV_SEQUENTIAL|0x1) = 0

old_mmap(0x40167000, 86016, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x113000) = 0x40167000
old_mmap(0x4017c000, 11512, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x4017c000

close(3) = 0
mprotect(0xbf8ab000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC|PROT_GROWSDOWN) = 0
open("/lib/libcap.so.1", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0P\16\0\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=33287, ...}) = 0
old_mmap(NULL, 13520, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x4017f000 madvise(0x4017f000, 13520, MADV_SEQUENTIAL|0x1) = 0
old_mmap(0x40182000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x2000) = 0x40182000
close(3) = 0
open("/lib/tls/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\360U\1"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1349081, ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40183000 old_mmap(NULL, 1132940, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x40184000 madvise(0x40184000, 1132940, MADV_SEQUENTIAL|0x1) = 0

old_mmap(0x4028e000, 32768, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x10a000) = 0x4028e000
old_mmap(0x40296000, 10636, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x40296000

close(3) = 0
open("/lib/libdl.so.2", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0`\33\0\000"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=13647, ...}) = 0
old_mmap(NULL, 8628, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x40299000
madvise(0x40299000, 8628, MADV_SEQUENTIAL|0x1) = 0
old_mmap(0x4029b000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x2000) = 0x4029b000
close(3) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4029c000
set_thread_area({entry_number:-1 -> 6, base_addr:0x4029c080, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}) = 0

munmap(0x40018000, 103028)              = 0
socket(PF_UNIX, SOCK_DGRAM, 0)          = 3
fcntl64(3, F_SETFD, FD_CLOEXEC)         = 0
connect(3, {sa_family=AF_UNIX, path="/dev/log"}, 16) = 0
brk(0)                                  = 0x80f8000
brk(0x8119000)                          = 0x8119000
brk(0)                                  = 0x8119000
time([1208803493])                      = 1208803493
open("/etc/localtime", O_RDONLY)        = 4
fstat64(4, {st_mode=S_IFREG|0644, st_size=1323, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40018000
read(4, "TZif\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\7\0\0\0\7\0"..., 4096) = 1323
close(4)                                = 0
munmap(0x40018000, 4096)                = 0
getpid()                                = 6117
rt_sigaction(SIGPIPE, {0x40237f60, [], 0}, {SIG_DFL}, 8) = 0
send(3, "<29>Apr 21 19:44:53 ntpd[6117]: "..., 86, 0) = 86
rt_sigaction(SIGPIPE, {SIG_DFL}, NULL, 8) = 0
umask(0)                                = 022
umask(022)                              = 0
getuid32()                              = 0
gettimeofday({1208803493, 60029}, NULL) = 0
clone(Process 6118 attached
child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x4029c0c8) = 6118
[pid  6118] setsid()                    = 6118
[pid  6118] chdir("/")                  = 0
[pid  6118] open("/dev/null", O_RDWR)   = 4
[pid  6118] fstat64(4, {st_mode=S_IFCHR|0666, st_rdev=makedev(1, 3), ...}) = 0
[pid  6118] dup2(4, 0)                  = 0
[pid  6118] dup2(4, 1)                  = 1
[pid  6118] dup2(4, 2)                  = 2
[pid  6118] close(4)                    = 0
[pid  6118] rt_sigaction(SIGHUP, {0x80540f0, [], 0}, {SIG_DFL}, 8) = 0
[pid  6118] rt_sigaction(SIGINT, {0x80540f0, [], 0}, {SIG_DFL}, 8) = 0
[pid  6118] rt_sigaction(SIGQUIT, {0x80540f0, [], 0}, {SIG_DFL}, 8) = 0
[pid  6118] rt_sigaction(SIGTERM, {0x80540f0, [], 0}, {SIG_DFL}, 8) = 0
[pid  6118] rt_sigaction(SIGBUS, {0x80540f0, [], 0}, {SIG_DFL}, 8) = 0
[pid  6118] rt_sigaction(SIGUSR1, {0x8053670, [], 0}, {SIG_DFL}, 8) = 0
[pid  6118] rt_sigaction(SIGUSR2, {0x8053620, [], 0}, {SIG_DFL}, 8) = 0
[pid  6118] rt_sigaction(SIGPIPE, {SIG_IGN}, {SIG_DFL}, 8) = 0
[pid  6118] rt_sigaction(SIGALRM, {0x806e540, [], 0}, {SIG_DFL}, 8) = 0
[pid  6118] setitimer(ITIMER_REAL, {it_interval={1, 0}, it_value={1, 0}}, NULL) = 0
[pid  6118] uname({sys="Linux", node="server", ...}) = 0
[pid  6118] gettimeofday({1208803493, 62080}, NULL) = 0
[pid  6118] gettimeofday({1208803493, 62142}, NULL) = 0
[pid  6118] gettimeofday({1208803493, 62198}, NULL) = 0
[pid  6118] gettimeofday({1208803493, 62252}, NULL) = 0
[pid  6118] gettimeofday({1208803493, 62305}, NULL) = 0
[pid  6118] gettimeofday({1208803493, 62359}, NULL) = 0
[pid  6118] time([1208803493])          = 1208803493
[pid  6118] rt_sigaction(SIGPIPE, {0x40237f60, [], 0}, {SIG_IGN}, 8) = 0
[pid  6118] send(3, "<30>Apr 21 19:44:53 ntpd[6118]: "..., 55, 0) = 55
[pid  6118] rt_sigaction(SIGPIPE, {SIG_IGN}, NULL, 8) = 0
[pid  6118] gettimeofday({1208803493, 62944}, NULL) = 0
[pid  6118] socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 4
[pid  6118] close(4)                    = 0
[pid  6118] socket(PF_INET6, SOCK_STREAM, IPPROTO_IP) = -1 EAFNOSUPPORT (Address family not supported by protocol)
[pid  6118] socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 4
[pid  6118] getrlimit(RLIMIT_NOFILE, {rlim_cur=1024, rlim_max=1024}) = 0
[pid  6118] getrlimit(RLIMIT_NOFILE, {rlim_cur=1024, rlim_max=1024}) = 0
[pid  6118] getrlimit(RLIMIT_NOFILE, {rlim_cur=1024, rlim_max=1024}) = 0
[pid  6118] time([1208803493])          = 1208803493
[pid  6118] rt_sigaction(SIGPIPE, {0x40237f60, [], 0}, {SIG_IGN}, 8) = 0
[pid  6118] send(3, "<31>Apr 21 19:44:53 ntpd[6118]: "..., 100, 0) = 100
[pid  6118] rt_sigaction(SIGPIPE, {SIG_IGN}, NULL, 8) = 0
[pid  6118] fcntl64(4, F_DUPFD, 16)     = 16
[pid  6118] close(4)                    = 0
[pid  6118] setsockopt(16, SOL_SOCKET, SO_REUSEADDR, [0], 4) = 0
[pid  6118] bind(16, {sa_family=AF_INET, sin_port=htons(123), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
[pid  6118] setsockopt(16, SOL_SOCKET, 0x1d /* SO_??? */, [1], 4) = 0
[pid  6118] fcntl64(16, F_SETFL, O_RDONLY|O_NONBLOCK) = 0
[pid  6118] time([1208803493])          = 1208803493
[pid  6118] rt_sigaction(SIGPIPE, {0x40237f60, [], 0}, {SIG_IGN}, 8) = 0
[pid  6118] send(3, "<30>Apr 21 19:44:53 ntpd[6118]: "..., 88, 0) = 88
[pid  6118] rt_sigaction(SIGPIPE, {SIG_IGN}, NULL, 8) = 0
[pid  6118] socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 4
[pid  6118] ioctl(4, 0x8912, 0x80f82b8) = 0
[pid  6118] open("/proc/net/if_inet6", O_RDONLY) = -1 ENOENT (No such file or directory)
[pid  6118] ioctl(4, 0x8913, 0xbf8ab100) = 0
[pid  6118] ioctl(4, 0x891b, 0xbf8ab100) = 0
[pid  6118] socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 5
[pid  6118] fcntl64(5, F_DUPFD, 16)     = 17
[pid  6118] close(5)                    = 0
[pid  6118] setsockopt(17, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
[pid  6118] setsockopt(16, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
[pid  6118] bind(17, {sa_family=AF_INET, sin_port=htons(123), sin_addr=inet_addr("127.0.0.1")}, 16) = 0
[pid  6118] setsockopt(16, SOL_SOCKET, SO_REUSEADDR, [0], 4) = 0
[pid  6118] setsockopt(17, SOL_SOCKET, 0x1d /* SO_??? */, [1], 4) = 0
[pid  6118] fcntl64(17, F_SETFL, O_RDONLY|O_NONBLOCK) = 0
[pid  6118] time([1208803493])          = 1208803493
[pid  6118] rt_sigaction(SIGPIPE, {0x40237f60, [], 0}, {SIG_IGN}, 8) = 0
[pid  6118] send(3, "<30>Apr 21 19:44:53 ntpd[6118]: "..., 83, 0) = 83
[pid  6118] rt_sigaction(SIGPIPE, {SIG_IGN}, NULL, 8) = 0
[pid  6118] ioctl(4, 0x8913, 0xbf8ab100) = 0
[pid  6118] ioctl(4, 0x8919, 0xbf8ab100) = 0
[pid  6118] ioctl(4, 0x891b, 0xbf8ab100) = 0
[pid  6118] socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 5
[pid  6118] fcntl64(5, F_DUPFD, 16)     = 18
[pid  6118] close(5)                    = 0
[pid  6118] setsockopt(18, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
[pid  6118] setsockopt(16, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
[pid  6118] bind(18, {sa_family=AF_INET, sin_port=htons(123), sin_addr=inet_addr("192.168.0.39")}, 16) = 0
[pid  6118] setsockopt(16, SOL_SOCKET, SO_REUSEADDR, [0], 4) = 0
[pid  6118] setsockopt(18, SOL_SOCKET, 0x1d /* SO_??? */, [1], 4) = 0
[pid  6118] fcntl64(18, F_SETFL, O_RDONLY|O_NONBLOCK) = 0
[pid  6118] time([1208803493])          = 1208803493
[pid  6118] rt_sigaction(SIGPIPE, {0x40237f60, [], 0}, {SIG_IGN}, 8) = 0
[pid  6118] send(3, "<30>Apr 21 19:44:53 ntpd[6118]: "..., 88, 0) = 88
[pid  6118] rt_sigaction(SIGPIPE, {SIG_IGN}, NULL, 8) = 0
[pid  6118] ioctl(4, 0x8913, 0xbf8ab100) = 0
[pid  6118] ioctl(4, 0x8919, 0xbf8ab100) = 0
[pid  6118] ioctl(4, 0x891b, 0xbf8ab100) = 0
[pid  6118] socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 5
[pid  6118] fcntl64(5, F_DUPFD, 16)     = 19
[pid  6118] close(5)                    = 0
[pid  6118] setsockopt(19, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
[pid  6118] setsockopt(16, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
[pid  6118] bind(19, {sa_family=AF_INET, sin_port=htons(123), sin_addr=inet_addr("192.168.2.2")}, 16) = 0
[pid  6118] setsockopt(16, SOL_SOCKET, SO_REUSEADDR, [0], 4) = 0
[pid  6118] setsockopt(19, SOL_SOCKET, 0x1d /* SO_??? */, [1], 4) = 0
[pid  6118] fcntl64(19, F_SETFL, O_RDONLY|O_NONBLOCK) = 0
[pid  6118] time([1208803493])          = 1208803493
[pid  6118] rt_sigaction(SIGPIPE, {0x40237f60, [], 0}, {SIG_IGN}, 8) = 0
[pid  6118] send(3, "<30>Apr 21 19:44:53 ntpd[6118]: "..., 87, 0) = 87
[pid  6118] rt_sigaction(SIGPIPE, {SIG_IGN}, NULL, 8) = 0
[pid  6118] ioctl(4, 0x8913, 0xbf8ab100) = 0
[pid  6118] ioctl(4, 0x8919, 0xbf8ab100) = 0
[pid  6118] ioctl(4, 0x891b, 0xbf8ab100) = 0
[pid  6118] socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 5
[pid  6118] fcntl64(5, F_DUPFD, 16)     = 20
[pid  6118] close(5)                    = 0
[pid  6118] setsockopt(20, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
[pid  6118] setsockopt(16, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
[pid  6118] bind(20, {sa_family=AF_INET, sin_port=htons(123), sin_addr=inet_addr("192.168.0.65")}, 16) = 0
[pid  6118] setsockopt(16, SOL_SOCKET, SO_REUSEADDR, [0], 4) = 0
[pid  6118] setsockopt(20, SOL_SOCKET, 0x1d /* SO_??? */, [1], 4) = 0
[pid  6118] fcntl64(20, F_SETFL, O_RDONLY|O_NONBLOCK) = 0
[pid  6118] time([1208803493])          = 1208803493
[pid  6118] rt_sigaction(SIGPIPE, {0x40237f60, [], 0}, {SIG_IGN}, 8) = 0
[pid  6118] send(3, "<30>Apr 21 19:44:53 ntpd[6118]: "..., 88, 0) = 88
[pid  6118] rt_sigaction(SIGPIPE, {SIG_IGN}, NULL, 8) = 0
[pid  6118] ioctl(4, 0x8913, 0xbf8ab100) = 0
[pid  6118] ioctl(4, 0x8919, 0xbf8ab100) = 0
[pid  6118] ioctl(4, 0x891b, 0xbf8ab100) = 0
[pid  6118] socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 5
[pid  6118] fcntl64(5, F_DUPFD, 16)     = 21
[pid  6118] close(5)                    = 0
[pid  6118] setsockopt(21, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
[pid  6118] setsockopt(16, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
[pid  6118] bind(21, {sa_family=AF_INET, sin_port=htons(123), sin_addr=inet_addr("192.168.0.1")}, 16) = 0
[pid  6118] setsockopt(16, SOL_SOCKET, SO_REUSEADDR, [0], 4) = 0
[pid  6118] setsockopt(21, SOL_SOCKET, 0x1d /* SO_??? */, [1], 4) = 0
[pid  6118] fcntl64(21, F_SETFL, O_RDONLY|O_NONBLOCK) = 0
[pid  6118] time([1208803493])          = 1208803493
[pid  6118] rt_sigaction(SIGPIPE, {0x40237f60, [], 0}, {SIG_IGN}, 8) = 0
[pid  6118] send(3, "<30>Apr 21 19:44:53 ntpd[6118]: "..., 87, 0) = 87
[pid  6118] rt_sigaction(SIGPIPE, {SIG_IGN}, NULL, 8) = 0
[pid  6118] ioctl(4, 0x8913, 0xbf8ab100) = 0
[pid  6118] ioctl(4, 0x8919, 0xbf8ab100) = 0
[pid  6118] ioctl(4, 0x891b, 0xbf8ab100) = 0
[pid  6118] socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 5
[pid  6118] fcntl64(5, F_DUPFD, 16)     = 22
[pid  6118] close(5)                    = 0
[pid  6118] setsockopt(22, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
[pid  6118] setsockopt(16, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
[pid  6118] bind(22, {sa_family=AF_INET, sin_port=htons(123), sin_addr=inet_addr("192.168.10.1")}, 16) = 0
[pid  6118] setsockopt(16, SOL_SOCKET, SO_REUSEADDR, [0], 4) = 0
[pid  6118] setsockopt(22, SOL_SOCKET, 0x1d /* SO_??? */, [1], 4) = 0
[pid  6118] fcntl64(22, F_SETFL, O_RDONLY|O_NONBLOCK) = 0
[pid  6118] time([1208803493])          = 1208803493
[pid  6118] rt_sigaction(SIGPIPE, {0x40237f60, [], 0}, {SIG_IGN}, 8) = 0
[pid  6118] send(3, "<30>Apr 21 19:44:53 ntpd[6118]: "..., 91, 0) = 91
[pid  6118] rt_sigaction(SIGPIPE, {SIG_IGN}, NULL, 8) = 0
[pid  6118] ioctl(4, 0x8913, 0xbf8ab100) = 0
[pid  6118] ioctl(4, 0x8919, 0xbf8ab100) = 0
[pid  6118] ioctl(4, 0x891b, 0xbf8ab100) = 0
[pid  6118] ioctl(4, 0x8913, 0xbf8ab100) = 0
[pid  6118] ioctl(4, 0x8919, 0xbf8ab100) = 0
[pid  6118] ioctl(4, 0x891b, 0xbf8ab100) = 0
[pid  6118] socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 5
[pid  6118] fcntl64(5, F_DUPFD, 16)     = 23
[pid  6118] close(5)                    = 0
[pid  6118] setsockopt(23, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
[pid  6118] setsockopt(16, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
[pid  6118] bind(23, {sa_family=AF_INET, sin_port=htons(123), sin_addr=inet_addr("192.168.20.1")}, 16) = 0
[pid  6118] setsockopt(16, SOL_SOCKET, SO_REUSEADDR, [0], 4) = 0
[pid  6118] setsockopt(23, SOL_SOCKET, 0x1d /* SO_??? */, [1], 4) = 0
[pid  6118] fcntl64(23, F_SETFL, O_RDONLY|O_NONBLOCK) = 0
[pid  6118] time([1208803493])          = 1208803493
[pid  6118] rt_sigaction(SIGPIPE, {0x40237f60, [], 0}, {SIG_IGN}, 8) = 0
[pid  6118] send(3, "<30>Apr 21 19:44:53 ntpd[6118]: "..., 91, 0) = 91
[pid  6118] rt_sigaction(SIGPIPE, {SIG_IGN}, NULL, 8) = 0
[pid  6118] ioctl(4, 0x8913, 0xbf8ab100) = 0
[pid  6118] ioctl(4, 0x8919, 0xbf8ab100) = 0
[pid  6118] ioctl(4, 0x891b, 0xbf8ab100) = 0
[pid  6118] close(4)                    = 0
[pid  6118] setsockopt(17, SOL_SOCKET, SO_REUSEADDR, [0], 4) = 0
[pid  6118] setsockopt(18, SOL_SOCKET, SO_REUSEADDR, [0], 4) = 0
[pid  6118] setsockopt(19, SOL_SOCKET, SO_REUSEADDR, [0], 4) = 0
[pid  6118] setsockopt(20, SOL_SOCKET, SO_REUSEADDR, [0], 4) = 0
[pid  6118] setsockopt(21, SOL_SOCKET, SO_REUSEADDR, [0], 4) = 0
[pid  6118] setsockopt(22, SOL_SOCKET, SO_REUSEADDR, [0], 4) = 0
[pid  6118] setsockopt(23, SOL_SOCKET, SO_REUSEADDR, [0], 4) = 0
[pid  6118] rt_sigaction(SIGSYS, {0x805f570, [], 0}, {SIG_DFL}, 8) = 0
[pid  6118] rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
[pid  6118] adjtimex({modes=61, offset=-2725, freq=4946064, maxerror=16, esterror=16, status=64, constant=4, precision=1, tolerance=33554432, time={1208803493, 75815}}) = 5
[pid  6118] rt_sigaction(SIGSYS, {SIG_DFL}, NULL, 8) = 0
[pid  6118] time([1208803493])          = 1208803493
[pid  6118] rt_sigaction(SIGPIPE, {0x40237f60, [], 0}, {SIG_IGN}, 8) = 0
[pid  6118] send(3, "<30>Apr 21 19:44:53 ntpd[6118]: "..., 60, 0) = 60
[pid  6118] rt_sigaction(SIGPIPE, {SIG_IGN}, NULL, 8) = 0
[pid  6118] open("/var/run/ntp/ntpd.pid", O_WRONLY|O_CREAT|O_TRUNC, 0666) = 4
[pid  6118] fstat64(4, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0
[pid  6118] mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40018000
[pid  6118] write(4, "6118", 4)         = 4
[pid  6118] close(4)                    = 0
[pid  6118] munmap(0x40018000, 4096)    = 0
[pid  6118] open("/etc/ntp.conf", O_RDONLY) = 4
[pid  6118] fstat64(4, {st_mode=S_IFREG|0644, st_size=2175, ...}) = 0
[pid  6118] mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40018000
[pid  6118] read(4, "################################"..., 4096) = 2175
[pid  6118] open("/etc/nsswitch.conf", O_RDONLY) = 5
[pid  6118] fstat64(5, {st_mode=S_IFREG|0644, st_size=1239, ...}) = 0
[pid  6118] mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40019000
[pid  6118] read(5, "#\n# /etc/nsswitch.conf\n#\n# An ex"..., 4096) = 1239
[pid  6118] read(5, "", 4096)           = 0
[pid  6118] close(5)                    = 0
[pid  6118] munmap(0x40019000, 4096)    = 0
[pid  6118] open("/etc/ld.so.cache", O_RDONLY) = 5
[pid  6118] fstat64(5, {st_mode=S_IFREG|0644, st_size=103028, ...}) = 0
[pid  6118] old_mmap(NULL, 103028, PROT_READ, MAP_PRIVATE, 5, 0) = 0x4029d000
[pid  6118] close(5)                    = 0
[pid  6118] open("/lib/libnss_files.so.2", O_RDONLY) = 5
[pid  6118] read(5, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\220\35"..., 512) = 512
[pid  6118] fstat64(5, {st_mode=S_IFREG|0755, st_size=41737, ...}) = 0
[pid  6118] old_mmap(NULL, 33716, PROT_READ|PROT_EXEC, MAP_PRIVATE, 5, 0) = 0x40019000
[pid  6118] madvise(0x40019000, 33716, MADV_SEQUENTIAL|0x1) = 0
[pid  6118] old_mmap(0x40021000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 5, 0x8000) = 0x40021000
[pid  6118] close(5)                    = 0
[pid  6118] munmap(0x4029d000, 103028)  = 0
[pid  6118] open("/etc/services", O_RDONLY) = 5
[pid  6118] fcntl64(5, F_GETFD)         = 0
[pid  6118] fcntl64(5, F_SETFD, FD_CLOEXEC) = 0
[pid  6118] fstat64(5, {st_mode=S_IFREG|0644, st_size=596411, ...}) = 0
[pid  6118] mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40022000
[pid  6118] read(5, "#\n# Network services, Internet s"..., 4096) = 4096
[pid  6118] read(5, "a         20/udp    # File Trans"..., 4096) = 4096
[pid  6118] read(5, "ical Address Maintenance\n#      "..., 4096) = 4096
[pid  6118] read(5, "RUTGERS.EDU>\nhttp             80"..., 4096) = 4096
[pid  6118] read(5, "       Patrick McNamee <--none--"..., 4096) = 4096
[pid  6118] close(5)                    = 0
[pid  6118] munmap(0x40022000, 4096)    = 0
[pid  6118] open("/etc/services", O_RDONLY) = 5
[pid  6118] fcntl64(5, F_GETFD)         = 0
[pid  6118] fcntl64(5, F_SETFD, FD_CLOEXEC) = 0
[pid  6118] fstat64(5, {st_mode=S_IFREG|0644, st_size=596411, ...}) = 0
[pid  6118] mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40022000
[pid  6118] read(5, "#\n# Network services, Internet s"..., 4096) = 4096
[pid  6118] read(5, "a         20/udp    # File Trans"..., 4096) = 4096
[pid  6118] read(5, "ical Address Maintenance\n#      "..., 4096) = 4096
[pid  6118] read(5, "RUTGERS.EDU>\nhttp             80"..., 4096) = 4096
[pid  6118] read(5, "       Patrick McNamee <--none--"..., 4096) = 4096
[pid  6118] close(5)                    = 0
[pid  6118] munmap(0x40022000, 4096)    = 0
[pid  6118] open("/var/lib/ntp/drift/ntp.drift", O_RDONLY) = 5
[pid  6118] fstat64(5, {st_mode=S_IFREG|0644, st_size=7, ...}) = 0
[pid  6118] mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40022000
[pid  6118] read(5, "75.471\n", 4096)   = 7
[pid  6118] close(5)                    = 0
[pid  6118] munmap(0x40022000, 4096)    = 0
[pid  6118] time([1208803493])          = 1208803493
[pid  6118] rt_sigaction(SIGPIPE, {0x40237f60, [], 0}, {SIG_IGN}, 8) = 0
[pid  6118] send(3, "<30>Apr 21 19:44:53 ntpd[6118]: "..., 98, 0) = 98
[pid  6118] rt_sigaction(SIGPIPE, {SIG_IGN}, NULL, 8) = 0
[pid  6118] open("/var/log/ntp", O_WRONLY|O_APPEND|O_CREAT, 0666) = 5
[pid  6118] fstat64(5, {st_mode=S_IFREG|0644, st_size=403567, ...}) = 0
[pid  6118] mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40022000
[pid  6118] fstat64(5, {st_mode=S_IFREG|0644, st_size=403567, ...}) = 0
[pid  6118] _llseek(5, 403567, [403567], SEEK_SET) = 0
[pid  6118] open("/etc/services", O_RDONLY) = 6
[pid  6118] fcntl64(6, F_GETFD)         = 0
[pid  6118] fcntl64(6, F_SETFD, FD_CLOEXEC) = 0
[pid  6118] fstat64(6, {st_mode=S_IFREG|0644, st_size=596411, ...}) = 0
[pid  6118] mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40023000
[pid  6118] read(6, "#\n# Network services, Internet s"..., 4096) = 4096
[pid  6118] read(6, "a         20/udp    # File Trans"..., 4096) = 4096
[pid  6118] read(6, "ical Address Maintenance\n#      "..., 4096) = 4096
[pid  6118] read(6, "RUTGERS.EDU>\nhttp             80"..., 4096) = 4096
[pid  6118] read(6, "       Patrick McNamee <--none--"..., 4096) = 4096
[pid  6118] close(6)                    = 0
[pid  6118] munmap(0x40023000, 4096)    = 0
[pid  6118] socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 6
[pid  6118] connect(6, {sa_family=AF_INET, sin_port=htons(123), sin_addr=inet_addr("212.42.1.207")}, 16) = 0
[pid  6118] getsockname(6, {sa_family=AF_INET, sin_port=htons(4777), sin_addr=inet_addr("192.168.2.2")}, [16]) = 0
[pid  6118] close(6)                    = 0
[pid  6118] open("/etc/services", O_RDONLY) = 6
[pid  6118] fcntl64(6, F_GETFD)         = 0
[pid  6118] fcntl64(6, F_SETFD, FD_CLOEXEC) = 0
[pid  6118] fstat64(6, {st_mode=S_IFREG|0644, st_size=596411, ...}) = 0
[pid  6118] mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40023000
[pid  6118] read(6, "#\n# Network services, Internet s"..., 4096) = 4096
[pid  6118] read(6, "a         20/udp    # File Trans"..., 4096) = 4096
[pid  6118] read(6, "ical Address Maintenance\n#      "..., 4096) = 4096
[pid  6118] read(6, "RUTGERS.EDU>\nhttp             80"..., 4096) = 4096
[pid  6118] read(6, "       Patrick McNamee <--none--"..., 4096) = 4096
[pid  6118] close(6)                    = 0
[pid  6118] munmap(0x40023000, 4096)    = 0
[pid  6118] socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 6
[pid  6118] connect(6, {sa_family=AF_INET, sin_port=htons(123), sin_addr=inet_addr("132.146.236.132")}, 16) = 0
[pid  6118] getsockname(6, {sa_family=AF_INET, sin_port=htons(28603), sin_addr=inet_addr("192.168.2.2")}, [16]) = 0
[pid  6118] close(6)                    = 0
[pid  6118] open("/etc/services", O_RDONLY) = 6
[pid  6118] fcntl64(6, F_GETFD)         = 0
[pid  6118] fcntl64(6, F_SETFD, FD_CLOEXEC) = 0
[pid  6118] fstat64(6, {st_mode=S_IFREG|0644, st_size=596411, ...}) = 0
[pid  6118] mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40023000
[pid  6118] read(6, "#\n# Network services, Internet s"..., 4096) = 4096
[pid  6118] read(6, "a         20/udp    # File Trans"..., 4096) = 4096
[pid  6118] read(6, "ical Address Maintenance\n#      "..., 4096) = 4096
[pid  6118] read(6, "RUTGERS.EDU>\nhttp             80"..., 4096) = 4096
[pid  6118] read(6, "       Patrick McNamee <--none--"..., 4096) = 4096
[pid  6118] close(6)                    = 0
[pid  6118] munmap(0x40023000, 4096)    = 0
[pid  6118] gettimeofday({1208803493, 87853}, NULL) = 0
[pid  6118] open("/etc/resolv.conf", O_RDONLY) = 6
[pid  6118] fstat64(6, {st_mode=S_IFREG|0644, st_size=34, ...}) = 0
[pid  6118] mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40023000
[pid  6118] read(6, "nameserver 127.0.0.1\nsearch loca"..., 4096) = 34
[pid  6118] read(6, "", 4096)           = 0
[pid  6118] close(6)                    = 0
[pid  6118] munmap(0x40023000, 4096)    = 0
[pid  6118] socket(PF_UNIX, SOCK_STREAM, 0) = 6
[pid  6118] connect(6, {sa_family=AF_UNIX, path="/var/run/.nscd_socket"}, 110) = 0
[pid  6118] writev(6, [{"\2\0\0\0\4\0\0\0\25\0\0\0", 12}, {"ntp.cis.strath.ac.uk\0", 21}], 2) = 33
[pid  6118] read(6, "\2\0\0\0\377\377\377\377\0\0\0\0\0\0\0\0\377\377\377\377"..., 32) = 32
[pid  6118] close(6)                    = 0
[pid  6118] open("/etc/host.conf", O_RDONLY) = 6
[pid  6118] fstat64(6, {st_mode=S_IFREG|0644, st_size=369, ...}) = 0
[pid  6117] exit_group(0)               = ?
[pid  6118] mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40023000
read(6, "#\n# /etc/host.conf - resolver co"..., 4096) = 369
read(6, "", 4096)                       = 0
close(6)                                = 0
munmap(0x40023000, 4096)                = 0
open("/etc/hosts", O_RDONLY)            = 6
fcntl64(6, F_GETFD)                     = 0
fcntl64(6, F_SETFD, FD_CLOEXEC)         = 0
fstat64(6, {st_mode=S_IFREG|0644, st_size=770, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40023000
read(6, "#\n# hosts         This file desc"..., 4096) = 770
read(6, "", 4096)                       = 0
close(6)                                = 0
munmap(0x40023000, 4096)                = 0
open("/etc/ld.so.cache", O_RDONLY)      = 6

fstat64(6, {st_mode=S_IFREG|0644, st_size=103028, ...}) = 0
old_mmap(NULL, 103028, PROT_READ, MAP_PRIVATE, 6, 0) = 0x4029d000
close(6) = 0
open("/lib/libnss_dns.so.2", O_RDONLY) = 6
read(6, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0p\17\0\000"..., 512) = 512 fstat64(6, {st_mode=S_IFREG|0755, st_size=17722, ...}) = 0
old_mmap(NULL, 17352, PROT_READ|PROT_EXEC, MAP_PRIVATE, 6, 0) = 0x40023000 madvise(0x40023000, 17352, MADV_SEQUENTIAL|0x1) = 0
old_mmap(0x40027000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 6, 0x3000) = 0x40027000
close(6) = 0
open("/lib/libresolv.so.2", O_RDONLY) = 6
read(6, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0`+\0\000"..., 512) = 512 fstat64(6, {st_mode=S_IFREG|0755, st_size=74342, ...}) = 0
old_mmap(NULL, 73588, PROT_READ|PROT_EXEC, MAP_PRIVATE, 6, 0) = 0x402b7000 madvise(0x402b7000, 73588, MADV_SEQUENTIAL|0x1) = 0

old_mmap(0x402c6000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 6, 0xf000) = 0x402c6000
old_mmap(0x402c7000, 8052, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x402c7000

close(6) = 0
munmap(0x4029d000, 103028) = 0
stat64("/etc/resolv.conf", {st_mode=S_IFREG|0644, st_size=34, ...}) = 0 gettimeofday({1208803493, 91835}, NULL) = 0
open("/etc/resolv.conf", O_RDONLY) = 6
fstat64(6, {st_mode=S_IFREG|0644, st_size=34, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40028000 read(6, "nameserver 127.0.0.1\nsearch loca"..., 4096) = 34

read(6, "", 4096)                       = 0
close(6)                                = 0
munmap(0x40028000, 4096)                = 0

socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 6
connect(6, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("127.0.0.1")}, 28) = 0
send(6, "\221\371\1\0\0\1\0\0\0\0\0\0\3ntp\3cis\6strath\2ac\2u"..., 38, 0) = 38
gettimeofday({1208803493, 93255}, NULL) = 0
poll([{fd=6, events=POLLIN, revents=POLLIN}], 1, 5000) = 1
ioctl(6, FIONREAD, [261]) = 0
recvfrom(6, "\221\371\201\200\0\1\0\2\0\7\0\2\3ntp\3cis\6strath\2ac"..., 1024, 0, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("127.0.0.1")}, [16]) = 261
close(6) = 0
socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 6
connect(6, {sa_family=AF_INET, sin_port=htons(123), sin_addr=inet_addr("130.159.196.118")}, 16) = 0
getsockname(6, {sa_family=AF_INET, sin_port=htons(26300), sin_addr=inet_addr("192.168.2.2")}, [16]) = 0

close(6)                                = 0
open("/etc/services", O_RDONLY)         = 6
fcntl64(6, F_GETFD)                     = 0
fcntl64(6, F_SETFD, FD_CLOEXEC)         = 0

fstat64(6, {st_mode=S_IFREG|0644, st_size=596411, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40028000 read(6, "#\n# Network services, Internet s"..., 4096) = 4096
read(6, "a 20/udp # File Trans"..., 4096) = 4096
read(6, "ical Address Maintenance\n# "..., 4096) = 4096
read(6, "RUTGERS.EDU>\nhttp 80"..., 4096) = 4096
read(6, " Patrick McNamee <--none--"..., 4096) = 4096

close(6)                                = 0
munmap(0x40028000, 4096)                = 0
open("/etc/hosts", O_RDONLY)            = 6
fcntl64(6, F_GETFD)                     = 0
fcntl64(6, F_SETFD, FD_CLOEXEC)         = 0
fstat64(6, {st_mode=S_IFREG|0644, st_size=770, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40028000
read(6, "#\n# hosts         This file desc"..., 4096) = 770
read(6, "", 4096)                       = 0
close(6)                                = 0
munmap(0x40028000, 4096)                = 0

stat64("/etc/resolv.conf", {st_mode=S_IFREG|0644, st_size=34, ...}) = 0
socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 6
connect(6, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("127.0.0.1")}, 28) = 0
send(6, "\221\372\1\0\0\1\0\0\0\0\0\0\5ntp2d\3mcc\2ac\2uk\0\0\1"..., 33, 0) = 33
gettimeofday({1208803493, 96575}, NULL) = 0
poll([{fd=6, events=POLLIN, revents=POLLIN}], 1, 5000) = 1
ioctl(6, FIONREAD, [198]) = 0
recvfrom(6, "\221\372\201\200\0\1\0\2\0\4\0\1\5ntp2d\3mcc\2ac\2uk\0"..., 1024, 0, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("127.0.0.1")}, [16]) = 198
close(6) = 0
socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 6
connect(6, {sa_family=AF_INET, sin_port=htons(123), sin_addr=inet_addr("130.88.203.64")}, 16) = 0
getsockname(6, {sa_family=AF_INET, sin_port=htons(4566), sin_addr=inet_addr("192.168.2.2")}, [16]) = 0

close(6)                                = 0
open("/etc/services", O_RDONLY)         = 6
fcntl64(6, F_GETFD)                     = 0
fcntl64(6, F_SETFD, FD_CLOEXEC)         = 0

fstat64(6, {st_mode=S_IFREG|0644, st_size=596411, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40028000 read(6, "#\n# Network services, Internet s"..., 4096) = 4096
read(6, "a 20/udp # File Trans"..., 4096) = 4096
read(6, "ical Address Maintenance\n# "..., 4096) = 4096
read(6, "RUTGERS.EDU>\nhttp 80"..., 4096) = 4096
read(6, " Patrick McNamee <--none--"..., 4096) = 4096

close(6)                                = 0
munmap(0x40028000, 4096)                = 0
open("/etc/hosts", O_RDONLY)            = 6
fcntl64(6, F_GETFD)                     = 0
fcntl64(6, F_SETFD, FD_CLOEXEC)         = 0
fstat64(6, {st_mode=S_IFREG|0644, st_size=770, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40028000
read(6, "#\n# hosts         This file desc"..., 4096) = 770
read(6, "", 4096)                       = 0
close(6)                                = 0
munmap(0x40028000, 4096)                = 0

stat64("/etc/resolv.conf", {st_mode=S_IFREG|0644, st_size=34, ...}) = 0
socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 6
connect(6, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("127.0.0.1")}, 28) = 0
send(6, "\221\373\1\0\0\1\0\0\0\0\0\0\3ntp\ttuxfamily\3net\0\0"..., 35, 0) = 35
gettimeofday({1208803493, 99838}, NULL) = 0
poll([{fd=6, events=POLLIN, revents=POLLIN}], 1, 5000) = 1
ioctl(6, FIONREAD, [93]) = 0
recvfrom(6, "\221\373\201\200\0\1\0\1\0\2\0\0\3ntp\ttuxfamily\3net\0"..., 1024, 0, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("127.0.0.1")}, [16]) = 93
close(6) = 0
socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 6
connect(6, {sa_family=AF_INET, sin_port=htons(123), sin_addr=inet_addr("212.85.158.10")}, 16) = 0
getsockname(6, {sa_family=AF_INET, sin_port=htons(24676), sin_addr=inet_addr("192.168.2.2")}, [16]) = 0

close(6)                                = 0
open("/etc/services", O_RDONLY)         = 6
fcntl64(6, F_GETFD)                     = 0
fcntl64(6, F_SETFD, FD_CLOEXEC)         = 0

fstat64(6, {st_mode=S_IFREG|0644, st_size=596411, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40028000 read(6, "#\n# Network services, Internet s"..., 4096) = 4096
read(6, "a 20/udp # File Trans"..., 4096) = 4096
read(6, "ical Address Maintenance\n# "..., 4096) = 4096
read(6, "RUTGERS.EDU>\nhttp 80"..., 4096) = 4096
read(6, " Patrick McNamee <--none--"..., 4096) = 4096

close(6)                                = 0
munmap(0x40028000, 4096)                = 0
open("/etc/hosts", O_RDONLY)            = 6
fcntl64(6, F_GETFD)                     = 0
fcntl64(6, F_SETFD, FD_CLOEXEC)         = 0
fstat64(6, {st_mode=S_IFREG|0644, st_size=770, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40028000
read(6, "#\n# hosts         This file desc"..., 4096) = 770
read(6, "", 4096)                       = 0
close(6)                                = 0
munmap(0x40028000, 4096)                = 0

stat64("/etc/resolv.conf", {st_mode=S_IFREG|0644, st_size=34, ...}) = 0
socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 6
connect(6, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("127.0.0.1")}, 28) = 0
send(6, "\221\374\1\0\0\1\0\0\0\0\0\0\4time\tflygplats\3net\0"..., 36, 0) = 36
gettimeofday({1208803493, 102714}, NULL) = 0
poll([{fd=6, events=POLLIN, revents=POLLIN}], 1, 5000) = 1
ioctl(6, FIONREAD, [257]) = 0
recvfrom(6, "\221\374\201\200\0\1\0\2\0\5\0\5\4time\tflygplats\3net"..., 1024, 0, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("127.0.0.1")}, [16]) = 257
close(6) = 0
socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 6
connect(6, {sa_family=AF_INET, sin_port=htons(123), sin_addr=inet_addr("213.112.52.107")}, 16) = 0
getsockname(6, {sa_family=AF_INET, sin_port=htons(13796), sin_addr=inet_addr("192.168.2.2")}, [16]) = 0

close(6)                                = 0
read(4, "", 4096)                       = 0
close(4)                                = 0
munmap(0x40018000, 4096)                = 0

adjtimex({modes=3, offset=-2725, freq=4946064, maxerror=16, esterror=16, status=64, constant=4, precision=1, tolerance=33554432, time={1208803493, 103755}}) = 5
prctl(0x8, 0x1, 0, 0, 0) = 0
socket(PF_UNIX, SOCK_STREAM, 0) = 4
connect(4, {sa_family=AF_UNIX, path="/var/run/.nscd_socket"}, 110) = 0
writev(4, [{"\2\0\0\0\0\0\0\0\4\0\0\0", 12}, {"ntp\0", 4}], 2) = 16
read(4, "\2\0\0\0\1\0\0\0\4\0\0\0\2\0\0\0J\0\0\0\376\377\0\0\v\0"..., 36) = 36
read(4, "ntp\0x\0NTP daemon\0/var/lib/ntp\0/b"..., 41) = 41

close(4)                                = 0
chdir("/var/lib/ntp/")                  = 0
chroot("/var/lib/ntp/")                 = 0
setuid32(74)                            = 0
setresuid32(-1, 74, -1)                 = 0
capget(0x20071026, 0, {, , })           = -1 EINVAL (Invalid argument)

capset(0, 0, {CAP_NET_BIND_SERVICE|CAP_SYS_TIME, CAP_NET_BIND_SERVICE|CAP_SYS_TIME, CAP_NET_BIND_SERVICE|CAP_SYS_TIME}) = -1 EINVAL (Invalid argument)
time(NULL) = 1208803493
write(5, "21 Apr 19:44:53 ntpd[6118]: cap_"..., 92) = 92
munmap(0x40022000, 4096) = 0
exit_group(-1) = ?
Process 6118 detached

#14 lore raw
Quoted 16 lines · David
Quoted 10 lines · [email protected] wrote:
Quoted 5 lines

/lib/libcap.so.1 -> libcap.so.1.92

I guess that's 1.92 (should be the version shipped with SuSE 9.1).

Ok, thanks, then it's definately not what I was thinking.

(Will wait to check out your strace)

strace attached.

Cheers
David

...

Quoted 1 line

capget(0x20071026, 0, {, , }) = -1 EINVAL (Invalid argument)

This is odd. libcap-1.x should be passing in 0x19980330.

Next, given the -EINVAL return value ntpd should be seeing a NULL result from cap_get_proc() and exiting right there.

What version of ntpd is this? (I must be looking at a wrong value, but even so the fact that cap_get_proc()->capget() is using 0x20071026 for version doesn't make sense)

Quoted 6 lines

capset(0, 0, {CAP_NET_BIND_SERVICE|CAP_SYS_TIME, CAP_NET_BIND_SERVICE|CAP_SYS_TIME, CAP_NET_BIND_SERVICE|CAP_SYS_TIME}) = -1 EINVAL (Invalid argument)
time(NULL) = 1208803493
write(5, "21 Apr 19:44:53 ntpd[6118]: cap_"..., 92) = 92
munmap(0x40022000, 4096) = 0
exit_group(-1) = ?
Process 6118 detached

thanks,
-serge

author
#15 lore raw
Quoted 26 lines · [email protected] wrote:
Quoted 18 lines · David
Quoted 10 lines · [email protected] wrote:
Quoted 5 lines

/lib/libcap.so.1 -> libcap.so.1.92

I guess that's 1.92 (should be the version shipped with SuSE 9.1).

Ok, thanks, then it's definately not what I was thinking.

(Will wait to check out your strace)

strace attached.

Cheers
David

...

Quoted 2 lines

capget(0x20071026, 0, {, , }) = -1 EINVAL (Invalid argument)

Quoted 19 lines

This is odd. libcap-1.x should be passing in 0x19980330.

Next, given the -EINVAL return value ntpd should be seeing a NULL result from cap_get_proc() and exiting right there.

What version of ntpd is this? (I must be looking at a wrong value, but even so the fact that cap_get_proc()->capget() is using 0x20071026 for version doesn't make sense)

Quoted 7 lines

capset(0, 0, {CAP_NET_BIND_SERVICE|CAP_SYS_TIME, CAP_NET_BIND_SERVICE|CAP_SYS_TIME, CAP_NET_BIND_SERVICE|CAP_SYS_TIME}) = -1 EINVAL (Invalid argument)
time(NULL) = 1208803493
write(5, "21 Apr 19:44:53 ntpd[6118]: cap_"..., 92) = 92
munmap(0x40022000, 4096) = 0
exit_group(-1) = ?
Process 6118 detached

Oh dear .. more investigation... here's the source from libcap-1.92. capget() is being called with null arguments, which I guess returns with the latest version in ch.version ?

The switch then fails and the set gets called with version = 0 ??

Cheers
David

void _libcap_establish_api(void)
{
struct __user_cap_header_struct ch;
struct __user_cap_data_struct cs;

   if (_libcap_kernel_version) {
       _cap_debug("already identified kernal api 0x%.8x",
                  _libcap_kernel_version);
       return;
   }

   memset(&ch, 0, sizeof(ch));
   memset(&cs, 0, sizeof(cs));

   (void) capget(&ch, &cs);

   switch (ch.version) {

   case 0x19980330:
       _libcap_kernel_version = 0x19980330;
       _libcap_kernel_features = CAP_FEATURE_PROC;
       break;

   case 0x19990414:
       _libcap_kernel_version = 0x19990414;
       _libcap_kernel_features = CAP_FEATURE_PROC|CAP_FEATURE_FILE;
       break;

   default:
       _libcap_kernel_version = 0x00000000;
       _libcap_kernel_features = 0x00000000;
   }

_cap_debug("version: %x, features: %x\n",

              _libcap_kernel_version, _libcap_kernel_features);
}
Quoted 3 lines

thanks,
-serge

#16 lore raw
Quoted 83 lines · David
Quoted 24 lines · [email protected] wrote:
Quoted 16 lines · David
Quoted 8 lines · [email protected] wrote:
Quoted 4 lines

/lib/libcap.so.1 -> libcap.so.1.92

I guess that's 1.92 (should be the version shipped with SuSE 9.1).

Ok, thanks, then it's definately not what I was thinking.

(Will wait to check out your strace)

strace attached.

Cheers
David

...

Quoted 2 lines

capget(0x20071026, 0, {, , }) = -1 EINVAL (Invalid argument)

Quoted 21 lines

This is odd. libcap-1.x should be passing in 0x19980330.

Next, given the -EINVAL return value ntpd should be seeing a NULL result from cap_get_proc() and exiting right there.

What version of ntpd is this? (I must be looking at a wrong value, but even so the fact that cap_get_proc()->capget() is using 0x20071026 for version doesn't make sense)

Quoted 9 lines

capset(0, 0, {CAP_NET_BIND_SERVICE|CAP_SYS_TIME, CAP_NET_BIND_SERVICE|CAP_SYS_TIME, CAP_NET_BIND_SERVICE|CAP_SYS_TIME}) = -1 EINVAL (Invalid argument)
time(NULL) = 1208803493
write(5, "21 Apr 19:44:53 ntpd[6118]: cap_"..., 92) = 92
munmap(0x40022000, 4096) = 0
exit_group(-1) = ?
Process 6118 detached

Oh dear .. more investigation... here's the source from libcap-1.92. capget() is being called with null arguments, which I guess returns with the latest version in ch.version ?

The switch then fails and the set gets called with version = 0 ??

Cheers
David

void _libcap_establish_api(void)

{
   struct __user_cap_header_struct ch;
   struct __user_cap_data_struct cs;

   if (_libcap_kernel_version) {
       _cap_debug("already identified kernal api 0x%.8x",
                  _libcap_kernel_version);
       return;
   }

   memset(&ch, 0, sizeof(ch));
   memset(&cs, 0, sizeof(cs));

   (void) capget(&ch, &cs);

   switch (ch.version) {

   case 0x19980330:
       _libcap_kernel_version = 0x19980330;
       _libcap_kernel_features = CAP_FEATURE_PROC;
       break;

   case 0x19990414:
       _libcap_kernel_version = 0x19990414;
       _libcap_kernel_features = CAP_FEATURE_PROC|CAP_FEATURE_FILE;
       break;
Quoted 8 lines
   default:
       _libcap_kernel_version = 0x00000000;
       _libcap_kernel_features = 0x00000000;
   }

   _cap_debug("version: %x, features: %x\n",
              _libcap_kernel_version, _libcap_kernel_features);
}

Interesting. The version I was looking at (1.10) has nothing like this.

I don't know what shipped with recent RedHat and Fedora distros, but I guess based on this we can in fact expect more failures from at least SuSe distros.

We can't reasonably have newer kernels reply to a query with an older libcap version, so I don't know what to do here. Andrew, do you have any ideas?

thanks,
-serge

#17 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Short version:

As you have found, libcap2 does address your problem. I suspect that libcap-1.97 here:

http://www.kernel.org/pub/linux/libs/security/linux-privs/libcap1/

will also prove successful. Please try it and report...

Thanks

Andrew

Long, and "almost funny" version:

A reason this fails on SUSE, is that SUSE appears to be shipping an experimental version of libcap 1.92 (+ patches). That is I downloaded the src.rpm from here:

http://download.opensuse.org/distribution/SL-10.1/inst-source/suse/src/

Did the "rpm2cpoi/cpio --extract" chicken dance and, much to my surprise, discovered the package is based on an experimental version of libcap that I had made (on a speculative libcap2 branch on sourceforge) to work with some ancient (and experimental) filesystem capability support (patches etc., captured here):

http://www.kernel.org/pub/linux/libs/security/linux-privs/old/kernel-2.2-fcap/README

This kernel patch was never integrated into the kernel, and Serge did not go even remotely close to it for the final implementation of filesystem capabilities in the kernel. Needless to say that this (old) 'experimental' libcap fails to work with the new 'released' kernel support is not at all surprising! :-(

[FWIW The old experimental support extended the capset/capget system call interface to manipulate filesystem capabilities, where Serge's patch does this directly via extended attribute system calls. These two access methods appear to be clashing quite horribly - but failing "safe".]

I believe code based on released version: libcap-1.10 and/or libcap-1.97 which you can download here:

http://www.kernel.org/pub/linux/libs/security/linux-privs/libcap1/

should work. You might like to try 1.97 as a replacement for the SUSE version and report any issues (the SUSE guys may need to think about a migration path).

[email protected] wrote:

| Quoting David ([email protected]):
|> [email protected] wrote:
|>> Quoting David ([email protected]):
|>>
|>>> [email protected] wrote:
|>>>
|>>>>> /lib/libcap.so.1 -> libcap.so.1.92
|>>>>>
|>>>>> I guess that's 1.92 (should be the version shipped with SuSE 9.1).
|>>>>>
|>>>> Ok, thanks, then it's definately not what I was thinking.
|>>>>
|>>>> (Will wait to check out your strace)
|>>>>
|>>> strace attached.
|>>>
|>>> Cheers
|>>> David
|>>>
|>>>
|>> ...
|>>
|>>> capget(0x20071026, 0, {, , })           = -1 EINVAL (Invalid argument)
|>>>
|>> This is odd.  libcap-1.x should be passing in 0x19980330.
|>>
|>> Next, given the -EINVAL return value ntpd should be seeing a NULL result
|>> from cap_get_proc() and exiting right there.
|>>
|>> What version of ntpd is this?  (I must be looking at a wrong value, but
|>> even so the fact that cap_get_proc()->capget() is using 0x20071026 for
|>> version doesn't make sense)
|>>
|>>
|>>> capset(0, 0, {CAP_NET_BIND_SERVICE|CAP_SYS_TIME,
|>>> CAP_NET_BIND_SERVICE|CAP_SYS_TIME,
CAP_NET_BIND_SERVICE|CAP_SYS_TIME}) =
|>>> -1 EINVAL (Invalid argument)
|>>> time(NULL)                              = 1208803493
|>>> write(5, "21 Apr 19:44:53 ntpd[6118]: cap_"..., 92) = 92
|>>> munmap(0x40022000, 4096)                = 0
|>>> exit_group(-1)                          = ?
|>>> Process 6118 detached
|>>>
|>>
|> Oh dear .. more investigation... here's the source from libcap-1.92.
|> capget() is being called with null arguments, which I guess returns with
|> the latest version in ch.version ?
|>
|> The switch then fails and the set gets called with version = 0 ??
|>
|> Cheers
|> David
|>
|> void _libcap_establish_api(void)
|> {
|>    struct __user_cap_header_struct ch;
|>    struct __user_cap_data_struct cs;
|>
|>    if (_libcap_kernel_version) {
|>        _cap_debug("already identified kernal api 0x%.8x",
|>                   _libcap_kernel_version);
|>        return;
|>    }
|>
|>    memset(&ch, 0, sizeof(ch));
|>    memset(&cs, 0, sizeof(cs));
|>
|>    (void) capget(&ch, &cs);
|>
|>    switch (ch.version) {
|>
|>    case 0x19980330:
|>        _libcap_kernel_version = 0x19980330;
|>        _libcap_kernel_features = CAP_FEATURE_PROC;
|>        break;
|>
|>    case 0x19990414:
|>        _libcap_kernel_version = 0x19990414;
|>        _libcap_kernel_features = CAP_FEATURE_PROC|CAP_FEATURE_FILE;
|>        break;
|>
|>    default:
|>        _libcap_kernel_version = 0x00000000;
|>        _libcap_kernel_features = 0x00000000;
|>    }
|>
|>    _cap_debug("version: %x, features: %x\n",
|>               _libcap_kernel_version, _libcap_kernel_features);
|> }
|
| Interesting.  The version I was looking at (1.10) has nothing like this.
|
| I don't know what shipped with recent RedHat and Fedora distros, but I
| guess based on this we can in fact expect more failures from at least
| SuSe distros.
|
| We can't reasonably have newer kernels reply to a query with an older
| libcap version, so I don't know what to do here.  Andrew, do you have
| any ideas?
|
| thanks,
| -serge

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.6 (GNU/Linux)

iD8DBQFIDXes+bHCR3gb8jsRAt/MAKCOJ3FA9ubvcxY/T69J1Lx4efwpwgCeJI/2 g19NRIbvrZKueObVZYngd04=
=iV8y
-----END PGP SIGNATURE-----

author
#18 lore raw

Quoting "Andrew G. Morgan" <[email protected]>:

Quoted 3 lines

As you have found, libcap2 does address your problem. I suspect that libcap-1.97 here:

I daresay it will, but libcap v2 sorts my problems out so I'm happy. It's unfortunate that old versions of SuSE shipped with buggy libcap as the breakage will be blamed on the kernel upgrade. One of those things I guess.

David