Utility tool for dm-ioband.
Hi everyone,
I made a utility tool for dm-ioband version 0.0.4, named iobandctl.
It enables you to easily apply I/O bandwidth control to an entire disk, and manage it. It helps you set the percentage of bandwidth to give each partition, and each user, process, group, or cgroup. (You are not able to use cgroup support yet, because the dm-ioband patch to enable cgroup support (http://lwn.net/Articles/273802/)
is not ported to linux-2.6.25, but it will be soon.)
You can download it and find the manual at
http://people.valinux.co.jp/~kaizuka/dm-ioband/iobandctl/
This is a prototype code.
So, I'd like to hear your requests.
Feature fixed, it is going to be re-written in C.
Thanks,
KAIZUKA Hiroyuki
Hi,
This is iobandctl usage examples
EXAMPLE 1
This example shows how to create ioband devices, set weight values, create groups, and delete the ioband devices. The following is the typical case iobandctl expects.
sdb
+--------------+ +-------+------+-------+
50% | sdb1 | <-- |default|root |user1 | ioband-sdb1
| | | 60% | 30% | 10% |
+--------------+ +-------+----- +-------+
30% | sdb2 | <-- |default|root |user1 | ioband-sdb2
| | | 60% | 30% | 10% |
+--------------+ +-------+------+-------+
20% | sdb3 | <-- |default|root |user1 | ioband-sdb3
| | | 60% | 30% | 10% |
+--------------+ +-------+------+-------+(1) Create ioband devices
# iobandctl create /dev/sdb
3 ioband devices $B!](B /dev/mapper/ioband$B!](Bsdb1, /dev/mapper/ioband$B!](Bsdb2, /dev/mapper/ioband$B!](Bsdb3 $B!](B are created.
(2) Set weight values
# iobandctl weight /dev/sdb1:50 /dev/sdb2:30 /dev/sdb3:20
Allocate 50% of I/O bandwidth to /dev/sdb1, 30% to /dev/sdb2, 20% to /dev/sdb3. Now, you will be able to receive the benefit of bandwidth control using /dev/mapper/ioband-sdb[1-3] instead of /dev/sdb[1-3].
(3) Create groups
# iobandctl group /dev/sdb uid root:30 user1:10 default:60
Create groups. Group "root" and group "user1" are created on all ioband devices which have been mapped to the partitions contained in /dev/sdb. The processes whose uid is "root" are allocated 30% of I/O bandwidth. As a result, processes doing I/O to ioband$B!](Bsdb1 and whose uid is "root" can use 15% (50% for ioband-sdb1, 30% for root. 50% x 30% = 15%) of I/O bandwidth which /dev/sdb has.
default means all processes whose uid is not "root" or "user1".
(4) Delete ioband devices
# iobandctl destroy /dev/sdb
Delete ioband devices. ioband-sdb1, ioband-sdb2, and ioband-sdb3 are deleted.
EXAMPLE 2
/dev/sdb1 is an extended partition, which you don$B!G(Bt need I/O bandwidth control. /dev/sdb5 and /dev/sdb6 are intended to be controlled by uids, /dev/sdb7 by gids.
sdb
+--------------+ +-------+------+-------+
0% | sdb1 | <-- | | | | ioband-sdb1
+--------------+ +-------+----- +-------+
40% | sdb5 | <-- |default|root |user1 | ioband-sdb5
| | | 60% | 30% | 10% | (controlled by uid)
+--------------+ +-------+----- +-------+
30% | sdb6 | <-- |default|root |user1 | ioband-sdb6
| | | 60% | 30% | 10% | (controlled by uid)
+--------------+ +-------+------+-------+
30% | sdb7 | <-- |default|wheel |users | ioband-sdb7
| | | 50% | 40% | 10% | (controlled by gid)
+--------------+ +-------+------+-------+(1) Create ioband devices
# iobandctl create /dev/sdb
The same as EXAMPLE 1 (1).
(2) Set weight values
# iobandctl weight /dev/sdb5:40 /dev/sdb6:30 /dev/sdb7:30
The weight value of the device not specified (/dev/sdb1) is set to 0 automatically.
(3) Create groups
# iobandctl group /dev/sdb uid root:30 user1:10 default:60 <-- (a) # iobandctl group /dev/sdb7 gid wheel:40 users:10 default:50 <-- (b)
The (a) sets type "uid" and creates groups for /dev/sdb5 and /dev/sdb6, although it sets the same settings to /dev/sdb7.
The (b) changes the settings of /dev/sdb7 only.
Quoted 26 lines · KAIZUKA Hiroyuki
Hi everyone,
I made a utility tool for dm-ioband version 0.0.4, named iobandctl.
It enables you to easily apply I/O bandwidth control to an entire disk, and manage it. It helps you set the percentage of bandwidth to give each partition, and each user, process, group, or cgroup. (You are not able to use cgroup support yet, because the dm-ioband patch to enable cgroup support (http://lwn.net/Articles/273802/)
is not ported to linux-2.6.25, but it will be soon.)You can download it and find the manual at
http://people.valinux.co.jp/~kaizuka/dm-ioband/iobandctl/This is a prototype code.
So, I'd like to hear your requests.
Feature fixed, it is going to be re-written in C.Thanks,
KAIZUKA Hiroyuki_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xensource.com/xen-devel