cross-compiling on OS X, make menuconfig fails
I'm trying to cross-compile a PowerPC kernel from an Intel OS X system.
I've almost got it working, except "make menuconfig" dies. It says
I'm missing ncurses:
*** Unable to find the ncurses libraries or the *** required header files.
*** 'make menuconfig' requires the ncurses libraries.
However, I do not think that ncurses is the real problem, since I do have ncurses installed. I think the real problem is that the check-lxdialog.sh is trying to execute this code:
echo -e ' #include CURSES_LOC \n main() {}' | gcc '-DCURSES_LOC=<ncurses.h>' -DLOCALE -DKBUILD_NO_NLS -lncurses -xc - -o .lxdialog.tmp
And the compiler is failing with this output:
<stdin>:1: error: syntax error before ‘-’ token
<stdin>:1: error: stray ‘#’ in program
So something strange is going on. Has anyone been able to cross-compile from an Intel Mac running OS X?
Quoted 1 line · On Sun, Apr 27, 2008 at 08:34:46PM -0500, [email protected] wrote:
I'm trying to cross-compile a PowerPC kernel from an Intel OS X system.
<snip>
Quoted 4 lines
However, I do not think that ncurses is the real problem, since I do have ncurses installed. I think the real problem is that the
check-lxdialog.shis trying to execute this code:
Quoted 8 lines
echo -e ' #include
CURSES_LOC\nmain(){}' | gcc '-DCURSES_LOC=<ncurses.h>' -DLOCALE -DKBUILD_NO_NLS -lncurses -xc - -o .lxdialog.tmpAnd the compiler is failing with this output:
<stdin>:1: error: syntax error before ‘-’ token
<stdin>:1: error: stray ‘#’ in program
On most linux systems echo supports c-syle escapes with "-e". I'm guessing which ever echo you're getting dosesn't do that.
I think the best fix is to ensure you're getting bash as your shell.
A nasty hack would be to make check-lxdialog.sh do something like:
(echo ' #include CURSES_LOC';echo 'main() {}') | gcc '-DCURSES_LOC=<ncurses.h>' -DLOCALE -DKBUILD_NO_NLS -lncurses -xc - -o .lxdialog.tmp
But you'll likley find other palces it breaks.
Yours Tony
linux.conf.au http://www.marchsouth.org/
Jan 19 - 24 2009 The Australian Linux Technical Conference!
Hi Timur!
Quoted 8 lines · On 28 Apr 2008, at 03:34, [email protected] wrote:
I'm trying to cross-compile a PowerPC kernel from an Intel OS X system. I've almost got it working, except "make menuconfig" dies. It says I'm missing ncurses:
*** Unable to find the ncurses libraries or the *** required header files.
*** 'make menuconfig' requires the ncurses libraries.However, I do not think that ncurses is the real problem, since I do have ncurses installed. I think the real problem is that the
check-lxdialog.shis trying to execute this code:
Quoted 8 lines
echo -e ' #include
CURSES_LOC\nmain(){}' | gcc '-DCURSES_LOC=<ncurses.h>' -DLOCALE -DKBUILD_NO_NLS -lncurses -xc - -o .lxdialog.tmpAnd the compiler is failing with this output:
<stdin>:1: error: syntax error before ‘-’ token
<stdin>:1: error: stray ‘#’ in programSo something strange is going on. Has anyone been able to cross-compile from an Intel Mac running OS X?
For some strange reason Apple decided to change 'echo':
/bin/bash -c 'echo -e ...' does the right thing/bin/sh -c 'echo -e ...' keeps the "-e" in the output but interprets the \n /bin/echo -e ... does no interpretation and even keeps the \n
I'd recommend installing the coreutils-default package from fink, then you get a sane /sw/bin/echo.
Side-note on sanity: ISTR that POSIX defines echo in this (/bin/echo) strange way, urging people to use printf instead.
Ciao,
Roland
--
Any society that would give up a little liberty to gain a little security will deserve neither and lose both. - Benjamin Franklin -----BEGIN GEEK CODE BLOCK-----
Version: 3.12
GS/CS/M/MU d-(++) s:+ a-> C+++ UL++++ P+++ L+++ E(+) W+ !N K- w--- M+ !V Y+ PGP++ t+(++) 5 R+ tv-- b+ DI++ e++++ h---- y+++
------END GEEK CODE BLOCK------
Quoted 6 lines · Roland Kuhn
For some strange reason Apple decided to change 'echo':
/bin/bash-c 'echo -e ...' does the right thing/bin/sh-c 'echo -e ...' keeps the "-e" in the output but interprets the \n/bin/echo-e ... does no interpretation and even keeps the \n
Wow, that is messed up. Especially since "/bin/sh --version" and "/bin/bash --version" give me the same output.
Would you say that OS X is broken? I'm having a hard time finding documentation for 'sh', so I can't find out what echo -e is supposed to do in 'sh'.
I read in the latest Linux Journal magazine that someone noticed that even though the kernel scripts say #!/bin/sh, many of them are really bash scripts. This person went through the effort of changing the script to be true 'sh' scripts. Has that code been merged in?
Quoted 2 lines
I'd recommend installing the coreutils-default package from fink, then you get a sane /sw/bin/echo.
But the scripts still reference /bin/sh, so I would need to change the scripts or symlink /bin/sh. If I'm going to symlink /bin/sh, I'd rather just symlink it to /bin/bash.
Quoted 2 lines
Side-note on sanity: ISTR that POSIX defines echo in this (
/bin/echo) strange way, urging people to use printf instead.
But printf is bash, not sh. I would need to change #!/bin/sh to #!/bin/bash.
Signature · 2 lines
Timur Tabi Linux kernel developer at Freescale
Quoted 2 lines · Tony Breeds
On most linux systems echo supports c-syle escapes with "-e". I'm guessing which ever echo you're getting dosesn't do that.
Yes, that is my problem.
Quoted 1 line
I think the best fix is to ensure you're getting bash as your shell.
The script starts off with this line:
#!/bin/sh
Doesn't that mean that it should be interpreted by sh and not bash?
Quoted 2 lines
A nasty hack would be to make
check-lxdialog.shdo something like:
(echo ' #include CURSES_LOC';echo 'main(){}') | gcc '-DCURSES_LOC=<ncurses.h>' -DLOCALE -DKBUILD_NO_NLS -lncurses -xc - -o .lxdialog.tmp
This works. Do you think if I posted a patch that makes this change, it will be accepted?
Signature · 2 lines
Timur Tabi Linux kernel developer at Freescale
Quoted 5 lines
I read in the latest Linux Journal magazine that someone noticed that even though the kernel scripts say #!/bin/sh, many of them are really bash scripts. This person went through the effort of changing the script to be true 'sh' scripts. Has that code been merged in?
I have no patches pending but I may have lost them.
As I am 100% ignorant about what is bash and what is not bash specialities I will more or less be blind when I apply them so I hope they are well tested.
Sam
Quoted 13 lines · Timur Tabi
Quoted 2 lines · Tony Breeds
On most linux systems echo supports c-syle escapes with "-e". I'm guessing which ever echo you're getting dosesn't do that.
Yes, that is my problem.
Quoted 1 line
I think the best fix is to ensure you're getting bash as your shell.
The script starts off with this line:
#!/bin/sh
Quoted 7 lines
Doesn't that mean that it should be interpreted by sh and not bash?
Quoted 2 lines
A nasty hack would be to make
check-lxdialog.shdo something like:
(echo ' #include CURSES_LOC';echo 'main(){}') | gcc '-DCURSES_LOC=<ncurses.h>' -DLOCALE -DKBUILD_NO_NLS -lncurses -xc - -o .lxdialog.tmpThis works. Do you think if I posted a patch that makes this change, it will be accepted?
Yes.
Sam
Quoted 10 lines · Sam Ravnborg
Quoted 5 lines
I read in the latest Linux Journal magazine that someone noticed that even though the kernel scripts say #!/bin/sh, many of them are really bash scripts. This person went through the effort of changing the script to be true 'sh' scripts. Has that code been merged in?
I have no patches pending but I may have lost them.
As I am 100% ignorant about what is bash and what is not bash specialities I will more or less be blind when I apply them so I hope they are well tested.
*shrug*
As a sanity check, try to run them with ash(1). Before going into review of portability.
Quoted 16 lines · Sam Ravnborg
Quoted 15 lines · Timur Tabi
Quoted 2 lines · Tony Breeds
On most linux systems echo supports c-syle escapes with "-e". I'm guessing which ever echo you're getting dosesn't do that.
Yes, that is my problem.
Quoted 1 line
I think the best fix is to ensure you're getting bash as your shell.
The script starts off with this line:
#!/bin/sh
Doesn't that mean that it should be interpreted by sh and not bash?
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
A nasty hack would be to make
check-lxdialog.shdo something like:
(echo ' #include CURSES_LOC';echo 'main(){}') | gcc '-DCURSES_LOC=<ncurses.h>' -DLOCALE -DKBUILD_NO_NLS -lncurses -xc - -o .lxdialog.tmpThis works. Do you think if I posted a patch that makes this change, it will be accepted?
Yes.
Good grief, folks...
check() {
$cc -xc - -o $tmp 2>/dev/null <<'EOF'
#include CURSES_LOC
main() {}
EOF
...if you insist on feeding these two lines to gcc stdin. Nasty hack, indeed...
<<'word'
[lines]
word
redirects stdin and feeds lines to it verbatim. Same without quotes will do the same, but do expansion in the text first.
It's been there since the original Bourne's shell in v7 and it's a bloody standard way to redirect from text...
Quoted 2 lines
Good grief, folks...
Thanks Al.
I've queued up the following patch.
Sam
commit c99cc32e0d92f5fdbdd39a7f42cfff869062fff5
Author: Sam Ravnborg <[email protected]> Date: Tue Apr 29 20:02:44 2008 +0200
kconfig: made check-lxdialog more portable
OS-X shell did not like 'echo -e' so implement suggestion from Al Viro to use a more portable construct.
scripts/kconfig/lxdialog/check-lxdialog.sh +4 -2
@@ -36,8 +36,10 @@ trap "rm -f $tmp" 0 1 2 3 15 # Check if we can link to ncurses check() { - echo -e " #include CURSES_LOC \n main() {}" | - $cc -xc - -o $tmp 2> /dev/null + $cc -xc - -o $tmp 2>/dev/null <<'EOF' +#include CURSES_LOC +main() {} +EOF if [ $? != 0 ]; then echo " *** Unable to find the ncurses libraries or the" 1>&2 echo " *** required header files." 1>&2
Re: Why use /bin/sh in kernel build system?
In reply to Sam RavnborgQuoted 9 lines · Sam Ravnborg
Quoted 4 lines
I read in the latest Linux Journal magazine that someone noticed that even though the kernel scripts say #!/bin/sh, many of them are really bash scripts. This person went through the effort of changing the script to be true 'sh' scripts. Has that code been merged in?
I have no patches pending but I may have lost them.
As I am 100% ignorant about what is bash and what is not bash specialities I will more or less be blind when I apply them so I hope they are well tested.
So why use /bin/sh ever in the kernel build system? I consciously began using /bin/bash consistently in scripts years ago because you just never know what you get when you use /bin/sh. I remember replacing /bin/sh with /bin/bash in gcc's build system to get it to work on some system at some point. Life is too short to keep having to fight silliness like this and I can't see a valid reason why a system building a Linux kernel, or for that matter gcc, should not have the bash shell installed on it.
And on some systems, changing /bin/sh to point to /bin/bash can result in subtle problems with that system's environment, so that is not a good option. At least by using /bin/bash you know what you get and the dependency is then known to all.
Signature · 1 line
Mark Rustad, [email protected]
Re: Why use /bin/sh in kernel build system?
Quoted 16 lines · Mark Rustad
Quoted 8 lines · Sam Ravnborg
Quoted 7 lines
I read in the latest Linux Journal magazine that someone noticed that even
though the kernel scripts say #!/bin/sh, many of them are really bash scripts.
This person went through the effort of changing the script to be true 'sh'
scripts. Has that code been merged in?Quoted 4 lines
I have no patches pending but I may have lost them.
As I am 100% ignorant about what is bash and what is not bash specialities I will more or less be blind when I apply them so I hope they are well tested.
Quoted 7 lines
So why use
/bin/shever in the kernel build system? I consciously began using/bin/bashconsistently in scripts years ago because you just never know what you get when you use/bin/sh. I remember replacing/bin/shwith/bin/bashin gcc's build system to get it to work on some system at some point. Life is too short to keep having to fight silliness like this and I can't see a valid reason why a system building a Linux kernel, or for that matter gcc, should not have the bash shell installed on it.
Think harder.
Quoted 4 lines
And on some systems, changing
/bin/shto point to/bin/bashcan result in subtle problems with that system's environment, so that is not a good option. At least by using/bin/bashyou know what you get and the dependency is then known to all.
Re: Why use /bin/sh in kernel build system?
Quoted 25 lines · Alexey Dobriyan
Quoted 16 lines · Mark Rustad
Quoted 8 lines · Sam Ravnborg
Quoted 7 lines
I read in the latest Linux Journal magazine that someone noticed that even
though the kernel scripts say #!/bin/sh, many of them are really bash scripts.
This person went through the effort of changing the script to be true 'sh'
scripts. Has that code been merged in?Quoted 4 lines
I have no patches pending but I may have lost them.
As I am 100% ignorant about what is bash and what is not bash specialities I will more or less be blind when I apply them so I hope they are well tested.Quoted 7 lines
So why use
/bin/shever in the kernel build system? I consciously began using/bin/bashconsistently in scripts years ago because you just never know what you get when you use/bin/sh. I remember replacing/bin/shwith/bin/bashin gcc's build system to get it to work on some system at some point. Life is too short to keep having to fight silliness like this and I can't see a valid reason why a system building a Linux kernel, or for that matter gcc, should not have the bash shell installed on it.
Quoted 1 line
Think harder.
Hint: not every joe user may install bash into /bin... That's why we see some scripts begin with "/usr/bin/env bash" as there are less systems without env in /usr/bin than systems without bash in /bin (or at all).
Willy
On Tue, 2008-04-29 at 09:51 -0500, Timur Tabi wrote:
[...]
Quoted 1 line
But printf is bash, not sh. I would need to change #!/bin/sh to #!/bin/bash.
Yes, also:
---- snip ----
{2}type -all printf
printf is a shell builtin
printf is /usr/bin/printf
---- snip ----
And the latter is part of coreutils.
Bernd
Signature · 3 lines
Firmix Software GmbH http://www.firmix.at/
mobil: +43 664 4416156 fax: +43 1 7890849-55
Embedded Linux Development and ServicesRe: Why use /bin/sh in kernel build system?
In reply to Willy TarreauQuoted 4 lines · Willy Tarreau
Hint: not every joe user may install bash into /bin... That's why we see some scripts begin with "
/usr/bin/envbash" as there are less systems without env in/usr/binthan systems without bash in /bin (or at all).
I agree that #!/bin/bash is a bad idea. I think the easiest, and maybe the best, approach is to fix shell issue one-by-one. The one I found was easily fixed by Al Viro's here-document change.
Signature · 2 lines
Timur Tabi Linux kernel developer at Freescale
Re: Why use /bin/sh in kernel build system?
In reply to Willy TarreauQuoted 10 lines · Willy Tarreau
Quoted 5 lines · Mark Rustad
Quoted 4 lines
Life is too short to keep having to fight silliness like this and I can't see a valid reason why a system building a Linux kernel, or for that matter gcc, should not have the bash shell installed on it.
Hint: not every joe user may install bash into /bin... That's why we
see some scripts begin with "/usr/bin/envbash" as there are less systems without env in/usr/binthan systems without bash in /bin (or at all).
/bin/sh standard behaviour is defined. We follow standards not written or dictated by us. I'm proud of that.
-sb
Re: Why use /bin/sh in kernel build system?
In reply to Willy TarreauQuoted 5 lines · Willy Tarreau
Hint: not every joe user may install bash into /bin... That's why we see some scripts begin with "
/usr/bin/envbash" as there are less systems without env in/usr/binthan systems without bash in /bin (or at all).
Too bad #!bash does not search $PATH.
Timur Tabi
Acked-byQuoted 11 lines · Sam Ravnborg
Quoted 1 line
Good grief, folks...
Thanks Al.
I've queued up the following patch.Sam
commit
c99cc32e0d92f5fdbdd39a7f42cfff869062fff5Author: Sam Ravnborg <[email protected]> Date: Tue Apr 29 20:02:44 2008 +0200
Quoted 7 lines
kconfig: made check-lxdialog more portable
OS-X shell did not like 'echo -e' so implement suggestion from Al Viro to use a more portable construct.
Signed-off-by Sam Ravnborg <[email protected]>Cc Al Viro <[email protected]>
Just for the record:
This works on OS X. I haven't tested it on Linux, though.
FYI, there are other issues that break cross-compiling from OS X, but none of them are related to /bin/sh. I'll post patches for those later this week.
Signature · 2 lines
Timur Tabi Linux kernel developer at Freescale
Quoted 20 lines · Timur Tabi
Quoted 11 lines · Sam Ravnborg
Quoted 1 line
Good grief, folks...
Thanks Al.
I've queued up the following patch.Sam
commit
c99cc32e0d92f5fdbdd39a7f42cfff869062fff5Author: Sam Ravnborg <[email protected]> Date: Tue Apr 29 20:02:44 2008 +0200Quoted 7 lines
kconfig: made check-lxdialog more portable
OS-X shell did not like 'echo -e' so implement suggestion from Al Viro to use a more portable construct.
Signed-off-by Sam Ravnborg <[email protected]>Cc Al Viro <[email protected]>
Quoted 8 lines
Just for the record:
Acked-by Timur Tabi <[email protected]>This works on OS X. I haven't tested it on Linux, though.
FYI, there are other issues that break cross-compiling from OS X, but none of them are related to
/bin/sh. I'll post patches for those later this week.
Thanks.
Sam
SL Baur
Reviewed-byQuoted 32 lines · Sam Ravnborg
Quoted 2 lines
Good grief, folks...
Thanks Al.
I've queued up the following patch.Sam
commit
c99cc32e0d92f5fdbdd39a7f42cfff869062fff5
Author: Sam Ravnborg <[email protected]>
Date: Tue Apr 29 20:02:44 2008 +0200kconfig: made check-lxdialog more portable
OS-X shell did not like 'echo -e' so implement suggestion from Al Viro to use a more portable construct.
Signed-off-by Sam Ravnborg <[email protected]>Cc Al Viro <[email protected]>diff --git
a/scripts/kconfig/lxdialog/check-lxdialog.shb/scripts/kconfig/lxdialog/check-lxdialog.shindex 62e1e02..5552154 100644
---a/scripts/kconfig/lxdialog/check-lxdialog.sh
+++b/scripts/kconfig/lxdialog/check-lxdialog.sh
@@ -36,8 +36,10 @@ trap "rm -f $tmp" 0 1 2 3 15# Check if we can link to ncurses
check(){
- echo -e " #includeCURSES_LOC\nmain(){}" |
- $cc -xc - -o $tmp 2>/dev/null
+ $cc -xc - -o $tmp 2>/dev/null <<'EOF'
Quoted 7 lines
+#include
CURSES_LOC
+main() {}
+EOFif [ $? != 0 ]; then
echo " *** Unable to find the ncurses libraries or the" 1>&2
echo " *** required header files." 1>&2
This looks O.K. As a note, whatever behavior is being described here is system dependent, because on my installation of that other OS, `echo -e' works fine whether it is invoked as /bin/bash or /bin/sh which appears to be a strict copy of /bin/bash.
$ uname -v Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu792.25.20~1/RELEASE_I386
-sb
Quoted 11 lines
This looks O.K. As a note, whatever behavior is being described here is system dependent, because on my installation of that other OS, `echo -e' works fine whether it is invoked as
/bin/bashor/bin/shwhich appears to be a strict copy of/bin/bash.$ uname -v Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu792.25.20~1/RELEASE_I386Reviewed-by SL Baur <[email protected]>
Thanks for your feedback.
The patch is already upstream so I unfortunately
cannot add your Reviewed-by: tag.
Sam
Hi Steve!
Quoted 48 lines · SL Baur
Quoted 37 lines · Sam Ravnborg
Quoted 2 lines
Good grief, folks...
Thanks Al.
I've queued up the following patch.Sam
commit
c99cc32e0d92f5fdbdd39a7f42cfff869062fff5Author: Sam Ravnborg <[email protected]> Date: Tue Apr 29 20:02:44 2008 +0200kconfig: made check-lxdialog more portable
OS-X shell did not like 'echo -e' so implement suggestion from Al Viro to use a more portable construct.
Signed-off-by Sam Ravnborg <[email protected]>Cc Al Viro <[email protected]>scripts/kconfig/lxdialog/check-lxdialog.sh +4
-2@@ -36,8 +36,10 @@ trap "rm -f $tmp" 0 1 2 3 15 # Check if we can link to ncurses check() { - echo -e " #include CURSES_LOC \n main() {}" | - $cc -xc - -o $tmp 2> /dev/null + $cc -xc - -o $tmp 2>/dev/null <<'EOF' +#include CURSES_LOC +main() {} +EOF if [ $? != 0 ]; thenQuoted 4 lines
echo " *** Unable to find the ncurses libraries or
the" 1>&2
echo " *** required header
files." 1>&2This looks O.K. As a note, whatever behavior is being described here is system dependent, because on my installation of that other OS, `echo -e' works fine whether it is invoked as
/bin/bashor/bin/shwhich appears to be a strict copy of/bin/bash.
Quoted 4 lines
$ uname -v Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu792.25.20~1/RELEASE_I386
Yes, they changed that between Tiger and Leopard, where I have
---
$ uname -v Darwin Kernel Version 9.2.2: Tue Mar 4 21:17:34 PST 2008; root:xnu-1228.4.31~1/RELEASE_I386 $ /bin/bash -c 'echo -e "buh\n"' buh
$ /bin/sh -c 'echo -e "buh\n"' -e buh
$ /bin/echo -e "buh\n" -e buh\n ---
The second one is POSIX+XSI, the third one plain POSIX. The first one is what people are used to ;-)
Ciao,
Roland
--
Any society that would give up a little liberty to gain a little security will deserve neither and lose both. - Benjamin Franklin -----BEGIN GEEK CODE BLOCK-----
Version: 3.12
GS/CS/M/MU d-(++) s:+ a-> C+++ UL++++ P+++ L+++ E(+) W+ !N K- w--- M+ !V Y+ PGP++ t+(++) 5 R+ tv-- b+ DI++ e++++ h---- y+++
------END GEEK CODE BLOCK------
Quoted 22 lines · Roland Kuhn
Hi Steve!
Quoted 5 lines · SL Baur
$ uname -v Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu792.25.20~1/RELEASE_I386Yes, they changed that between Tiger and Leopard, where I have
---
$ uname -v Darwin Kernel Version 9.2.2: Tue Mar 4 21:17:34 PST 2008; root:xnu-1228.4.31~1/RELEASE_I386 $ /bin/bash -c 'echo -e "buh\n"' buh$ /bin/sh -c 'echo -e "buh\n"' -e buh
Quoted 6 lines
$ /bin/echo -e "buh\n" -e buh\n ---The second one is POSIX+XSI, the third one plain POSIX. The first one is
what people are used to ;-)
Check.
$ /bin/bash -c 'echo -e "buh\n"' buh
$ /bin/sh -c 'echo -e "buh\n"' buh
$ /bin/echo -e "buh\n" -e buh\n
Of all the things to "standardize" on, why something like bash which has no standards? pdksh, ash, dash or POSIX mode zsh, would have been better...
-sb
Quoted 43 lines · SL Baur
Quoted 25 lines · Roland Kuhn
Hi Steve!
Quoted 6 lines · SL Baur
$ uname -v Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu792.25.20~1/RELEASE_I386Yes, they changed that between Tiger and Leopard, where I have
---
$ uname -v Darwin Kernel Version 9.2.2: Tue Mar 4 21:17:34 PST 2008; root:xnu-1228.4.31~1/RELEASE_I386 $ /bin/bash -c 'echo -e "buh\n"' buh$ /bin/sh -c 'echo -e "buh\n"' -e buhQuoted 7 lines
$ /bin/echo -e "buh\n" -e buh\n ---The second one is POSIX+XSI, the third one plain POSIX. The first one is
what people are used to ;-)Check.
$ /bin/bash -c 'echo -e "buh\n"' buh$ /bin/sh -c 'echo -e "buh\n"' buh
Quoted 8 lines
$ /bin/echo -e "buh\n" -e buh\nOf all the things to "standardize" on, why something like bash which has no standards? pdksh, ash, dash or POSIX mode zsh, would have been better...
It also depends on the shell option xpg_echo IIRC. If xpg_echo is off echo -e should work in /bin/sh, too.
Regards,
Arnd