KNC TV Station DVR Tuner Sound Issue
Dear all,
I recently had to change v4l drivers to support my WinTV HVR 1300. I have issues making my HVR work but that's not the point here. My problem is that since I updated kernel + drivers, I can't manage to make sound work when I'm using the tuner input. Sound jack input works when I'm using SVideo or Composite Video, but not when I'm using tuner.
Here are the options I'm using
tuner : port2=0
saa7134: oss=1 disable_ir=1
saa7134-oss: rate=48000
# lsmod Module Size Used by r8169 17360 0 e100 23556 0 cx8802 10372 0 firmware_class 4032 0 cx2341x 8516 0 cx8800 19256 0 cx88xx 49636 2 cx8802,cx8800 i2c_algo_bit 3908 1 cx88xx tveeprom 11472 1 cx88xx btcx_risc 2376 3 cx8802,cx8800,cx88xx saa7134_oss 9416 0 saa7134_empress 4292 0 saa6752hs 7180 0 saa7134 95820 2 saa7134_oss,saa7134_empress video_buf 13444 6 cx8802,cx8800,cx88xx,saa7134_oss,saa7134_empress,saa7134 compat_ioctl32 512 2 cx8800,saa7134 ir_kbd_i2c 3856 1 saa7134 ir_common 22788 3 cx88xx,saa7134,ir_kbd_i2c videodev 22464 4 cx8800,cx88xx,saa7134_empress,saa7134 v4l1_compat 12100 2 saa7134,videodev tuner 48424 0 v4l2_common 11392 7 cx2341x,cx8800,cx88xx,saa7134_empress,saa7134,videodev,tuner hwmon_vid 1856 0 via686a 8328 0 i2c_isa 1408 1 via686a i2c_core 12560 9 cx88xx,i2c_algo_bit,tveeprom,saa6752hs,saa7134,ir_kbd_i2c,tuner,via686a,i2c_isa ipt_REJECT 2048 3 iptable_filter 960 1 ip_tables 7176 1 iptable_filter
With this I have sound only when selecting SVideo or Composite input, but not when in tuner mode. Anyone has a clue ?
Signature · 8 lines
CAND Frederic Product Manager ANEVIA _______________________________________________ linux-dvb mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 49 lines · Frederic CAND
Dear all,
I recently had to change v4l drivers to support my WinTV HVR 1300. I have issues making my HVR work but that's not the point here. My problem is that since I updated kernel + drivers, I can't manage to make sound work when I'm using the tuner input. Sound jack input works when I'm using SVideo or Composite Video, but not when I'm using tuner.
Here are the options I'm using
tuner : port2=0
saa7134: oss=1 disable_ir=1
saa7134-oss: rate=48000# lsmod Module Size Used by r8169 17360 0 e100 23556 0 cx8802 10372 0 firmware_class 4032 0 cx2341x 8516 0 cx8800 19256 0 cx88xx 49636 2 cx8802,cx8800 i2c_algo_bit 3908 1 cx88xx tveeprom 11472 1 cx88xx btcx_risc 2376 3 cx8802,cx8800,cx88xx saa7134_oss 9416 0 saa7134_empress 4292 0 saa6752hs 7180 0 saa7134 95820 2 saa7134_oss,saa7134_empress video_buf 13444 6 cx8802,cx8800,cx88xx,saa7134_oss,saa7134_empress,saa7134 compat_ioctl32 512 2 cx8800,saa7134 ir_kbd_i2c 3856 1 saa7134 ir_common 22788 3 cx88xx,saa7134,ir_kbd_i2c videodev 22464 4 cx8800,cx88xx,saa7134_empress,saa7134 v4l1_compat 12100 2 saa7134,videodev tuner 48424 0 v4l2_common 11392 7 cx2341x,cx8800,cx88xx,saa7134_empress,saa7134,videodev,tuner hwmon_vid 1856 0 via686a 8328 0 i2c_isa 1408 1 via686a i2c_core 12560 9 cx88xx,i2c_algo_bit,tveeprom,saa6752hs,saa7134,ir_kbd_i2c,tuner,via686a,i2c_isa ipt_REJECT 2048 3 iptable_filter 960 1 ip_tables 7176 1 iptable_filter
Quoted 3 lines
With this I have sound only when selecting SVideo or Composite input, but not when in tuner mode. Anyone has a clue ?
I'm using kernel 2.6.22.19, btw
Signature · 8 lines
CAND Frederic Product Manager ANEVIA _______________________________________________ linux-dvb mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Hi Frederic,
Am Dienstag, den 29.04.2008, 11:09 +0200 schrieb Frederic CAND:
Quoted 8 lines
Dear all,
I recently had to change v4l drivers to support my WinTV HVR 1300. I have issues making my HVR work but that's not the point here. My problem is that since I updated kernel + drivers, I can't manage to make sound work when I'm using the tuner input. Sound jack input works when I'm using SVideo or Composite Video, but not when I'm using tuner.
Quoted 4 lines
Here are the options I'm using
tuner : port2=0
saa7134: oss=1 disable_ir=1
saa7134-oss: rate=48000
the rate=48000 is only valid for external analog input and disables sound from tuner. Have a look at the saa7134-oss mixer under such conditions.
You must use default rate of 32000 for dma sound from tuner.
The saa7134-oss is also soon deprecated and replaced by saa7134-alsa.
If you are considering using recent v4l-dvb mercurial stuff, which should be best for the HVR1300 and reporting bugs on saa7134-empress, you might still have your old saa7134-oss module around and some others like the old video_buf now loaded, since not deleted on upgrade.
After make rmmod and rminstall with current v4l-dvb you should delete such remaining modules on older kernels too before make install.
Cheers,
Hermann
Quoted 36 lines
# lsmod Module Size Used by r8169 17360 0 e100 23556 0 cx8802 10372 0 firmware_class 4032 0 cx2341x 8516 0 cx8800 19256 0 cx88xx 49636 2 cx8802,cx8800 i2c_algo_bit 3908 1 cx88xx tveeprom 11472 1 cx88xx btcx_risc 2376 3 cx8802,cx8800,cx88xx saa7134_oss 9416 0 saa7134_empress 4292 0 saa6752hs 7180 0 saa7134 95820 2 saa7134_oss,saa7134_empress video_buf 13444 6 cx8802,cx8800,cx88xx,saa7134_oss,saa7134_empress,saa7134 compat_ioctl32 512 2 cx8800,saa7134 ir_kbd_i2c 3856 1 saa7134 ir_common 22788 3 cx88xx,saa7134,ir_kbd_i2c videodev 22464 4 cx8800,cx88xx,saa7134_empress,saa7134 v4l1_compat 12100 2 saa7134,videodev tuner 48424 0 v4l2_common 11392 7 cx2341x,cx8800,cx88xx,saa7134_empress,saa7134,videodev,tuner hwmon_vid 1856 0 via686a 8328 0 i2c_isa 1408 1 via686a i2c_core 12560 9 cx88xx,i2c_algo_bit,tveeprom,saa6752hs,saa7134,ir_kbd_i2c,tuner,via686a,i2c_isa ipt_REJECT 2048 3 iptable_filter 960 1 ip_tables 7176 1 iptable_filter
Quoted 3 lines
With this I have sound only when selecting SVideo or Composite input, but not when in tuner mode. Anyone has a clue ?
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 29 lines · hermann pitton
Hi Frederic,
Am Dienstag, den 29.04.2008, 11:09 +0200 schrieb Frederic CAND:
Quoted 8 lines
Dear all,
I recently had to change v4l drivers to support my WinTV HVR 1300. I have issues making my HVR work but that's not the point here. My problem is that since I updated kernel + drivers, I can't manage to make sound work when I'm using the tuner input. Sound jack input works when I'm using SVideo or Composite Video, but not when I'm using tuner.
Quoted 4 lines
Here are the options I'm using
tuner : port2=0
saa7134: oss=1 disable_ir=1
saa7134-oss: rate=48000the rate=48000 is only valid for external analog input and disables sound from tuner. Have a look at the saa7134-oss mixer under such conditions.
You must use default rate of 32000 for dma sound from tuner.
The saa7134-oss is also soon deprecated and replaced by saa7134-alsa.
If you are considering using recent v4l-dvb mercurial stuff, which should be best for the HVR1300 and reporting bugs on saa7134-empress, you might still have your old saa7134-oss module around and some others like the old
video_bufnow loaded, since not deleted on upgrade.
Quoted 5 lines
After make rmmod and rminstall with current v4l-dvb you should delete such remaining modules on older kernels too before make install.
Cheers,
Hermann
hum I used to set rate to 48000 with my old 2005 july snapshot and it was working even with tuner ... but ok I'll try 32000
i've tried alsa and I had the same results, that is no sound with tuner but line in sound with composite and svideo
do I need some special stuffs compiled in my kernel except from config_snd ? about old modules still loaded this can't be since I build my system from scratch each time i try a new kernel / driver into an ext2 file, which I put on a 32MB flash disk and boot on it ... so I'm sure I'm not using my old v4l snapshot, but the 2.6.22.19 v4l drivers
I'll let you know if I can make it work
Signature · 8 lines
CAND Frederic Product Manager ANEVIA _______________________________________________ linux-dvb mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Am Dienstag, den 29.04.2008, 14:18 +0200 schrieb Frederic CAND:
Quoted 46 lines
Quoted 29 lines · hermann pitton
Hi Frederic,
Am Dienstag, den 29.04.2008, 11:09 +0200 schrieb Frederic CAND:
Quoted 8 lines
Dear all,
I recently had to change v4l drivers to support my WinTV HVR 1300. I have issues making my HVR work but that's not the point here. My problem is that since I updated kernel + drivers, I can't manage to make sound work when I'm using the tuner input. Sound jack input works when I'm using SVideo or Composite Video, but not when I'm using tuner.
Quoted 4 lines
Here are the options I'm using
tuner : port2=0
saa7134: oss=1 disable_ir=1
saa7134-oss: rate=48000the rate=48000 is only valid for external analog input and disables sound from tuner. Have a look at the saa7134-oss mixer under such conditions.
You must use default rate of 32000 for dma sound from tuner.
The saa7134-oss is also soon deprecated and replaced by saa7134-alsa.
If you are considering using recent v4l-dvb mercurial stuff, which should be best for the HVR1300 and reporting bugs on saa7134-empress, you might still have your old saa7134-oss module around and some others like the old
video_bufnow loaded, since not deleted on upgrade.Quoted 5 lines
After make rmmod and rminstall with current v4l-dvb you should delete such remaining modules on older kernels too before make install.
Cheers,
Hermannhum I used to set rate to 48000 with my old 2005 july snapshot and it was working even with tuner ... but ok I'll try 32000
i've tried alsa and I had the same results, that is no sound with tuner but line in sound with composite and svideo
do I need some special stuffs compiled in my kernel except fromconfig_snd? about old modules still loaded this can't be since I build my system from scratch each time i try a new kernel / driver into an ext2 file, which I put on a 32MB flash disk and boot on it ... so I'm sure I'm not using my old v4l snapshot, but the 2.6.22.19 v4l drivers
Quoted 1 line
I'll let you know if I can make it work
Ah, you are in France!
Try "modinfo saa7134". Due to unresolvable auto detection issues between different SECAM standards there was a secam= either DK, L or Lc option introduced.
Anything else then 32000Hz sampling rate for TV is wrong currently and you get that input disabled on saa7134-oss mixer. Yes, it was once possible, but not intended, to use 48000 also for TV/Video on saa7134 chips, but gave very poor and crackling sound and is wrong.
The current saa7134-alsa is simpler to use and also uses an exported mute symbol from saa7134-tvaudio. Default distribution settings are sufficient. On recent Ubutu releases seem to be problems with an out of tree alsa there.
Cheers,
Hermann
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 45 lines · hermann pitton
Am Dienstag, den 29.04.2008, 14:18 +0200 schrieb Frederic CAND:
Quoted 44 lines
Quoted 28 lines · hermann pitton
Hi Frederic,
Am Dienstag, den 29.04.2008, 11:09 +0200 schrieb Frederic CAND:
Quoted 8 lines
Dear all,
I recently had to change v4l drivers to support my WinTV HVR 1300. I have issues making my HVR work but that's not the point here. My problem is that since I updated kernel + drivers, I can't manage to make sound work when I'm using the tuner input. Sound jack input works when I'm using SVideo or Composite Video, but not when I'm using tuner.
Quoted 4 lines
Here are the options I'm using
tuner : port2=0
saa7134: oss=1 disable_ir=1
saa7134-oss: rate=48000the rate=48000 is only valid for external analog input and disables sound from tuner. Have a look at the saa7134-oss mixer under such conditions.
You must use default rate of 32000 for dma sound from tuner.
The saa7134-oss is also soon deprecated and replaced by saa7134-alsa.
If you are considering using recent v4l-dvb mercurial stuff, which should be best for the HVR1300 and reporting bugs on saa7134-empress, you might still have your old saa7134-oss module around and some others like the old
video_bufnow loaded, since not deleted on upgrade.Quoted 5 lines
After make rmmod and rminstall with current v4l-dvb you should delete such remaining modules on older kernels too before make install.
Cheers,
Hermannhum I used to set rate to 48000 with my old 2005 july snapshot and it was working even with tuner ... but ok I'll try 32000
i've tried alsa and I had the same results, that is no sound with tuner but line in sound with composite and svideo
do I need some special stuffs compiled in my kernel except fromconfig_snd? about old modules still loaded this can't be since I build my system from scratch each time i try a new kernel / driver into an ext2 file, which I put on a 32MB flash disk and boot on it ... so I'm sure I'm not using my old v4l snapshot, but the 2.6.22.19 v4l drivers
Quoted 3 lines
Quoted 1 line
I'll let you know if I can make it work
Ah, you are in France!
yeah!
Quoted 4 lines
Try "modinfo saa7134". Due to unresolvable auto detection issues between different SECAM standards there was a secam= either DK, L or Lc option introduced.
huhu... but my system has to work worldwide ... so a module option is not a good idea, because it does not only depends on the country, but also if my customer is using a signal modulator or not, ... and I have two cards in my system, and I want to be able to select a certain SECAM mode with the first one, and another mode with the second card Actually I'm selecting secam L, DK or BG with an ioctl cause my card can handle them (tested and working with older drivers/kernels)
Quoted 10 lines
Anything else then 32000Hz sampling rate for TV is wrong currently and you get that input disabled on saa7134-oss mixer. Yes, it was once possible, but not intended, to use 48000 also for TV/Video on saa7134 chips, but gave very poor and crackling sound and is wrong.
The current saa7134-alsa is simpler to use and also uses an exported mute symbol from saa7134-tvaudio. Default distribution settings are sufficient. On recent Ubutu releases seem to be problems with an out of tree alsa there.
Ok I'll see with this rate thing and let you know
Quoted 6 lines
Cheers,
Hermann
Greetings.
Signature · 8 lines
CAND Frederic Product Manager ANEVIA _______________________________________________ linux-dvb mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 72 lines · Frederic CAND
Quoted 45 lines · hermann pitton
Am Dienstag, den 29.04.2008, 14:18 +0200 schrieb Frederic CAND:
Quoted 44 lines
Quoted 28 lines · hermann pitton
Hi Frederic,
Am Dienstag, den 29.04.2008, 11:09 +0200 schrieb Frederic CAND:
Quoted 8 lines
Dear all,
I recently had to change v4l drivers to support my WinTV HVR 1300. I have issues making my HVR work but that's not the point here. My problem is that since I updated kernel + drivers, I can't manage to make sound work when I'm using the tuner input. Sound jack input works when I'm using SVideo or Composite Video, but not when I'm using tuner.
Quoted 4 lines
Here are the options I'm using
tuner : port2=0
saa7134: oss=1 disable_ir=1
saa7134-oss: rate=48000the rate=48000 is only valid for external analog input and disables sound from tuner. Have a look at the saa7134-oss mixer under such conditions.
You must use default rate of 32000 for dma sound from tuner.
The saa7134-oss is also soon deprecated and replaced by saa7134-alsa.
If you are considering using recent v4l-dvb mercurial stuff, which should be best for the HVR1300 and reporting bugs on saa7134-empress, you might still have your old saa7134-oss module around and some others like the old
video_bufnow loaded, since not deleted on upgrade.Quoted 5 lines
After make rmmod and rminstall with current v4l-dvb you should delete such remaining modules on older kernels too before make install.
Cheers,
Hermannhum I used to set rate to 48000 with my old 2005 july snapshot and it was working even with tuner ... but ok I'll try 32000
i've tried alsa and I had the same results, that is no sound with tuner but line in sound with composite and svideo
do I need some special stuffs compiled in my kernel except fromconfig_snd? about old modules still loaded this can't be since I build my system from scratch each time i try a new kernel / driver into an ext2 file, which I put on a 32MB flash disk and boot on it ... so I'm sure I'm not using my old v4l snapshot, but the 2.6.22.19 v4l driversQuoted 2 lines
Quoted 1 line
I'll let you know if I can make it work
Ah, you are in France!
yeah!
Quoted 3 lines
Try "modinfo saa7134". Due to unresolvable auto detection issues between different SECAM standards there was a secam= either DK, L or Lc option introduced.
huhu... but my system has to work worldwide ... so a module option is not a good idea, because it does not only depends on the country, but also if my customer is using a signal modulator or not, ... and I have two cards in my system, and I want to be able to select a certain SECAM mode with the first one, and another mode with the second card Actually I'm selecting secam L, DK or BG with an ioctl cause my card can handle them (tested and working with older
drivers/kernels)Quoted 9 lines
Anything else then 32000Hz sampling rate for TV is wrong currently and you get that input disabled on saa7134-oss mixer. Yes, it was once possible, but not intended, to use 48000 also for TV/Video on saa7134 chips, but gave very poor and crackling sound and is wrong.
The current saa7134-alsa is simpler to use and also uses an exported mute symbol from saa7134-tvaudio. Default distribution settings are sufficient. On recent Ubutu releases seem to be problems with an out of tree alsa there.
Quoted 9 lines
Ok I'll see with this rate thing and let you know
Quoted 5 lines
Cheers,
HermannGreetings.
I still have nothing with oss and rate=32000, with alsa, or with secam=l Anyway, some more informations :
* I've got the following error messages on saa7134 module insertion
saa7134_empress: Unknown symbol saa7134_devlistsaa7134_empress: Unknown symbol saa7134_common_ioctlsaa7134_empress: Unknown symbol saa7134_boardssaa7134_empress: Unknown symbol saa7134_ts_registersaa7134_empress: Unknown symbol saa7134_ts_qopssaa7134_empress: Unknown symbol saa7134_i2c_call_clientssaa7134_empress: Unknown symbol saa7134_ts_unregistersaa7134_alsa: Unknown symbol saa7134_tvaudio_setmutesaa7134_alsa: Unknown symbol saa_dsp_writelsaa7134_alsa: Unknown symbol saa7134_devlistsaa7134_alsa: Unknown symbol saa7134_pgtable_allocsaa7134_alsa: Unknown symbol saa7134_pgtable_buildsaa7134_alsa: Unknown symbol saa7134_pgtable_freesaa7134_alsa: Unknown symbol saa7134_dmasound_initsaa7134_alsa: Unknown symbol saa7134_dmasound_exitsaa7134_alsa: Unknown symbol saa7134_set_dmabits
saa7134 ALSA driver for DMA sound loaded
saa7134[0]/alsa: saa7134[0] at 0xe5300000 irq 5 registered as card -1 saa7134[1]/alsa: saa7134[1] at 0xe5301000 irq 9 registered as card -1
* When using audio_debug=1 for saa7134, I've got the following :
saa7134[1]/audio: mute/input: nothing to do [mute=1,input=Television] saa7134[1]/audio: sound IF not in use, skipping scan saa7134[1]/audio: mute/input: nothing to do [mute=1,input=Television] saa7134[1]/audio: mute/input: nothing to do [mute=1,input=Television] saa7134[1]/audio: ctl_mute=0 automute=0 input=Television => mute=0 input=Television
saa7134[1]/audio: sound IF not in use, skipping scan saa7134[1]/audio: mute/input: nothing to do [mute=0,input=Television] saa7134[1]/audio: sound IF not in use, skipping scan saa7134[1]/audio: mute/input: nothing to do [mute=0,input=Television] saa7134[1]/audio: ctl_mute=0 automute=1 input=Television => mute=1 input=Television
saa7134[1]/audio: sound IF not in use, skipping scan saa7134[1]/audio: ctl_mute=0 automute=0 input=Television => mute=0 input=Television
Signature · 8 lines
CAND Frederic Product Manager ANEVIA _______________________________________________ linux-dvb mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 105 lines · Frederic CAND
Quoted 71 lines · Frederic CAND
Quoted 45 lines · hermann pitton
Am Dienstag, den 29.04.2008, 14:18 +0200 schrieb Frederic CAND:
Quoted 44 lines
Quoted 28 lines · hermann pitton
Hi Frederic,
Am Dienstag, den 29.04.2008, 11:09 +0200 schrieb Frederic CAND:
Quoted 8 lines
Dear all,
I recently had to change v4l drivers to support my WinTV HVR 1300. I have issues making my HVR work but that's not the point here. My problem is that since I updated kernel + drivers, I can't manage to make sound work when I'm using the tuner input. Sound jack input works when I'm using SVideo or Composite Video, but not when I'm using tuner.
Quoted 4 lines
Here are the options I'm using
tuner : port2=0
saa7134: oss=1 disable_ir=1
saa7134-oss: rate=48000the rate=48000 is only valid for external analog input and disables sound from tuner. Have a look at the saa7134-oss mixer under such conditions.
You must use default rate of 32000 for dma sound from tuner.
The saa7134-oss is also soon deprecated and replaced by saa7134-alsa.
If you are considering using recent v4l-dvb mercurial stuff, which should be best for the HVR1300 and reporting bugs on saa7134-empress, you might still have your old saa7134-oss module around and some others like the old
video_bufnow loaded, since not deleted on upgrade.Quoted 5 lines
After make rmmod and rminstall with current v4l-dvb you should delete such remaining modules on older kernels too before make install.
Cheers,
Hermannhum I used to set rate to 48000 with my old 2005 july snapshot and it was working even with tuner ... but ok I'll try 32000
i've tried alsa and I had the same results, that is no sound with tuner but line in sound with composite and svideo
do I need some special stuffs compiled in my kernel except fromconfig_snd? about old modules still loaded this can't be since I build my system from scratch each time i try a new kernel / driver into an ext2 file, which I put on a 32MB flash disk and boot on it ... so I'm sure I'm not using my old v4l snapshot, but the 2.6.22.19 v4l driversQuoted 2 lines
Quoted 1 line
I'll let you know if I can make it work
Ah, you are in France!
yeah!
Quoted 3 lines
Try "modinfo saa7134". Due to unresolvable auto detection issues between different SECAM standards there was a secam= either DK, L or Lc option introduced.
huhu... but my system has to work worldwide ... so a module option is not a good idea, because it does not only depends on the country, but also if my customer is using a signal modulator or not, ... and I have two cards in my system, and I want to be able to select a certain SECAM mode with the first one, and another mode with the second card Actually I'm selecting secam L, DK or BG with an ioctl cause my card can handle them (tested and working with older
drivers/kernels)Quoted 9 lines
Anything else then 32000Hz sampling rate for TV is wrong currently and you get that input disabled on saa7134-oss mixer. Yes, it was once possible, but not intended, to use 48000 also for TV/Video on saa7134 chips, but gave very poor and crackling sound and is wrong.
The current saa7134-alsa is simpler to use and also uses an exported mute symbol from saa7134-tvaudio. Default distribution settings are sufficient. On recent Ubutu releases seem to be problems with an out of tree alsa there.
Quoted 9 lines
Ok I'll see with this rate thing and let you know
Quoted 5 lines
Cheers,
HermannGreetings.
I still have nothing with oss and rate=32000, with alsa, or with secam=l Anyway, some more informations :
* I've got the following error messages on saa7134 module insertion
saa7134_empress: Unknown symbolsaa7134_devlistsaa7134_empress: Unknown symbolsaa7134_common_ioctlsaa7134_empress: Unknown symbolsaa7134_boardssaa7134_empress: Unknown symbolsaa7134_ts_registersaa7134_empress: Unknown symbolsaa7134_ts_qopssaa7134_empress: Unknown symbolsaa7134_i2c_call_clientssaa7134_empress: Unknown symbolsaa7134_ts_unregistersaa7134_alsa: Unknown symbolsaa7134_tvaudio_setmutesaa7134_alsa: Unknown symbolsaa_dsp_writelsaa7134_alsa: Unknown symbolsaa7134_devlistsaa7134_alsa: Unknown symbolsaa7134_pgtable_allocsaa7134_alsa: Unknown symbolsaa7134_pgtable_buildsaa7134_alsa: Unknown symbolsaa7134_pgtable_freesaa7134_alsa: Unknown symbolsaa7134_dmasound_initsaa7134_alsa: Unknown symbolsaa7134_dmasound_exitsaa7134_alsa: Unknown symbolsaa7134_set_dmabits
saa7134 ALSA driver for DMA sound loaded
saa7134[0]/alsa: saa7134[0] at0xe5300000irq 5 registered as card -1 saa7134[1]/alsa: saa7134[1] at0xe5301000irq 9 registered as card -1
Quoted 17 lines
* When using audio_debug=1 for saa7134, I've got the following :
saa7134[1]/audio: mute/input: nothing to do [mute=1,input=Television] saa7134[1]/audio: sound IF not in use, skipping scan saa7134[1]/audio: mute/input: nothing to do [mute=1,input=Television] saa7134[1]/audio: mute/input: nothing to do [mute=1,input=Television] saa7134[1]/audio: ctl_mute=0 automute=0 input=Television => mute=0 input=Television
saa7134[1]/audio: sound IF not in use, skipping scan saa7134[1]/audio: mute/input: nothing to do [mute=0,input=Television] saa7134[1]/audio: sound IF not in use, skipping scan saa7134[1]/audio: mute/input: nothing to do [mute=0,input=Television] saa7134[1]/audio: ctl_mute=0 automute=1 input=Television => mute=1 input=Television
saa7134[1]/audio: sound IF not in use, skipping scan saa7134[1]/audio: ctl_mute=0 automute=0 input=Television => mute=0 input=Television
Did I mention I'm using 2.6.22.19 ?
Signature · 8 lines
CAND Frederic Product Manager ANEVIA _______________________________________________ linux-dvb mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Am Mittwoch, den 30.04.2008, 16:45 +0200 schrieb Frederic CAND:
Quoted 124 lines
Quoted 105 lines · Frederic CAND
Quoted 71 lines · Frederic CAND
Quoted 45 lines · hermann pitton
Am Dienstag, den 29.04.2008, 14:18 +0200 schrieb Frederic CAND:
Quoted 44 lines
Quoted 28 lines · hermann pitton
Hi Frederic,
Am Dienstag, den 29.04.2008, 11:09 +0200 schrieb Frederic CAND:
Quoted 8 lines
Dear all,
I recently had to change v4l drivers to support my WinTV HVR 1300. I have issues making my HVR work but that's not the point here. My problem is that since I updated kernel + drivers, I can't manage to make sound work when I'm using the tuner input. Sound jack input works when I'm using SVideo or Composite Video, but not when I'm using tuner.
Quoted 4 lines
Here are the options I'm using
tuner : port2=0
saa7134: oss=1 disable_ir=1
saa7134-oss: rate=48000the rate=48000 is only valid for external analog input and disables sound from tuner. Have a look at the saa7134-oss mixer under such conditions.
You must use default rate of 32000 for dma sound from tuner.
The saa7134-oss is also soon deprecated and replaced by saa7134-alsa.
If you are considering using recent v4l-dvb mercurial stuff, which should be best for the HVR1300 and reporting bugs on saa7134-empress, you might still have your old saa7134-oss module around and some others like the old
video_bufnow loaded, since not deleted on upgrade.Quoted 5 lines
After make rmmod and rminstall with current v4l-dvb you should delete such remaining modules on older kernels too before make install.
Cheers,
Hermannhum I used to set rate to 48000 with my old 2005 july snapshot and it was working even with tuner ... but ok I'll try 32000
i've tried alsa and I had the same results, that is no sound with tuner but line in sound with composite and svideo
do I need some special stuffs compiled in my kernel except fromconfig_snd? about old modules still loaded this can't be since I build my system from scratch each time i try a new kernel / driver into an ext2 file, which I put on a 32MB flash disk and boot on it ... so I'm sure I'm not using my old v4l snapshot, but the 2.6.22.19 v4l driversQuoted 2 lines
Quoted 1 line
I'll let you know if I can make it work
Ah, you are in France!
yeah!
Quoted 3 lines
Try "modinfo saa7134". Due to unresolvable auto detection issues between different SECAM standards there was a secam= either DK, L or Lc option introduced.
huhu... but my system has to work worldwide ... so a module option is not a good idea, because it does not only depends on the country, but also if my customer is using a signal modulator or not, ... and I have two cards in my system, and I want to be able to select a certain SECAM mode with the first one, and another mode with the second card Actually I'm selecting secam L, DK or BG with an ioctl cause my card can handle them (tested and working with older
drivers/kernels)Quoted 9 lines
Anything else then 32000Hz sampling rate for TV is wrong currently and you get that input disabled on saa7134-oss mixer. Yes, it was once possible, but not intended, to use 48000 also for TV/Video on saa7134 chips, but gave very poor and crackling sound and is wrong.
The current saa7134-alsa is simpler to use and also uses an exported mute symbol from saa7134-tvaudio. Default distribution settings are sufficient. On recent Ubutu releases seem to be problems with an out of tree alsa there.
Quoted 9 lines
Ok I'll see with this rate thing and let you know
Quoted 5 lines
Cheers,
HermannGreetings.
I still have nothing with oss and rate=32000, with alsa, or with secam=l Anyway, some more informations :
* I've got the following error messages on saa7134 module insertion
saa7134_empress: Unknown symbolsaa7134_devlistsaa7134_empress: Unknown symbolsaa7134_common_ioctlsaa7134_empress: Unknown symbolsaa7134_boardssaa7134_empress: Unknown symbolsaa7134_ts_registersaa7134_empress: Unknown symbolsaa7134_ts_qopssaa7134_empress: Unknown symbolsaa7134_i2c_call_clientssaa7134_empress: Unknown symbolsaa7134_ts_unregistersaa7134_alsa: Unknown symbolsaa7134_tvaudio_setmutesaa7134_alsa: Unknown symbolsaa_dsp_writelsaa7134_alsa: Unknown symbolsaa7134_devlistsaa7134_alsa: Unknown symbolsaa7134_pgtable_allocsaa7134_alsa: Unknown symbolsaa7134_pgtable_buildsaa7134_alsa: Unknown symbolsaa7134_pgtable_freesaa7134_alsa: Unknown symbolsaa7134_dmasound_initsaa7134_alsa: Unknown symbolsaa7134_dmasound_exitsaa7134_alsa: Unknown symbolsaa7134_set_dmabits
saa7134 ALSA driver for DMA sound loaded
saa7134[0]/alsa: saa7134[0] at0xe5300000irq 5 registered as card -1 saa7134[1]/alsa: saa7134[1] at0xe5301000irq 9 registered as card -1Quoted 17 lines
* When using audio_debug=1 for saa7134, I've got the following :
saa7134[1]/audio: mute/input: nothing to do [mute=1,input=Television] saa7134[1]/audio: sound IF not in use, skipping scan saa7134[1]/audio: mute/input: nothing to do [mute=1,input=Television] saa7134[1]/audio: mute/input: nothing to do [mute=1,input=Television] saa7134[1]/audio: ctl_mute=0 automute=0 input=Television => mute=0 input=Television
saa7134[1]/audio: sound IF not in use, skipping scan saa7134[1]/audio: mute/input: nothing to do [mute=0,input=Television] saa7134[1]/audio: sound IF not in use, skipping scan saa7134[1]/audio: mute/input: nothing to do [mute=0,input=Television] saa7134[1]/audio: ctl_mute=0 automute=1 input=Television => mute=1 input=Television
saa7134[1]/audio: sound IF not in use, skipping scan saa7134[1]/audio: ctl_mute=0 automute=0 input=Television => mute=0 input=Television
Quoted 2 lines
Did I mention I'm using 2.6.22.19 ?
Hi,
yes, that is the annoying part ;), but still fine, since others have been already restless on getting support with latest drivers on a 2.4.18 ! without to provide a single line of code themselves ...
This is completely different with you, but we have other issues too.
http://linuxtv.org/hg/v4l-dvb/rev/d6660f8c6dbb
You might try to clean your /media modules and try with that snapshot. Not compile tested for 2.6.22, but might fit. Click on bz2 or gz on top.
Of course, if not auto detected you can select each TV analog standard separately for each card you have, but selectable SECAM was new.
Do you have any progress on it or are you seriously asking me to look at a 2.6.22.19?
You might remember, I'm interested at the point, the encoder gave up.
Cheers,
Hermann
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 133 lines · hermann pitton
Am Mittwoch, den 30.04.2008, 16:45 +0200 schrieb Frederic CAND:
Quoted 123 lines
Quoted 105 lines · Frederic CAND
Quoted 71 lines · Frederic CAND
Quoted 45 lines · hermann pitton
Am Dienstag, den 29.04.2008, 14:18 +0200 schrieb Frederic CAND:
Quoted 44 lines
Quoted 28 lines · hermann pitton
Hi Frederic,
Am Dienstag, den 29.04.2008, 11:09 +0200 schrieb Frederic CAND:
Quoted 8 lines
Dear all,
I recently had to change v4l drivers to support my WinTV HVR 1300. I have issues making my HVR work but that's not the point here. My problem is that since I updated kernel + drivers, I can't manage to make sound work when I'm using the tuner input. Sound jack input works when I'm using SVideo or Composite Video, but not when I'm using tuner.
Quoted 4 lines
Here are the options I'm using
tuner : port2=0
saa7134: oss=1 disable_ir=1
saa7134-oss: rate=48000the rate=48000 is only valid for external analog input and disables sound from tuner. Have a look at the saa7134-oss mixer under such conditions.
You must use default rate of 32000 for dma sound from tuner.
The saa7134-oss is also soon deprecated and replaced by saa7134-alsa.
If you are considering using recent v4l-dvb mercurial stuff, which should be best for the HVR1300 and reporting bugs on saa7134-empress, you might still have your old saa7134-oss module around and some others like the old
video_bufnow loaded, since not deleted on upgrade.Quoted 5 lines
After make rmmod and rminstall with current v4l-dvb you should delete such remaining modules on older kernels too before make install.
Cheers,
Hermannhum I used to set rate to 48000 with my old 2005 july snapshot and it was working even with tuner ... but ok I'll try 32000
i've tried alsa and I had the same results, that is no sound with tuner but line in sound with composite and svideo
do I need some special stuffs compiled in my kernel except fromconfig_snd? about old modules still loaded this can't be since I build my system from scratch each time i try a new kernel / driver into an ext2 file, which I put on a 32MB flash disk and boot on it ... so I'm sure I'm not using my old v4l snapshot, but the 2.6.22.19 v4l driversQuoted 2 lines
Quoted 1 line
I'll let you know if I can make it work
Ah, you are in France!
yeah!
Quoted 3 lines
Try "modinfo saa7134". Due to unresolvable auto detection issues between different SECAM standards there was a secam= either DK, L or Lc option introduced.
huhu... but my system has to work worldwide ... so a module option is not a good idea, because it does not only depends on the country, but also if my customer is using a signal modulator or not, ... and I have two cards in my system, and I want to be able to select a certain SECAM mode with the first one, and another mode with the second card Actually I'm selecting secam L, DK or BG with an ioctl cause my card can handle them (tested and working with older
drivers/kernels)Quoted 9 lines
Anything else then 32000Hz sampling rate for TV is wrong currently and you get that input disabled on saa7134-oss mixer. Yes, it was once possible, but not intended, to use 48000 also for TV/Video on saa7134 chips, but gave very poor and crackling sound and is wrong.
The current saa7134-alsa is simpler to use and also uses an exported mute symbol from saa7134-tvaudio. Default distribution settings are sufficient. On recent Ubutu releases seem to be problems with an out of tree alsa there.
Quoted 9 lines
Ok I'll see with this rate thing and let you know
Quoted 5 lines
Cheers,
HermannGreetings.
I still have nothing with oss and rate=32000, with alsa, or with secam=l Anyway, some more informations :
* I've got the following error messages on saa7134 module insertion
saa7134_empress: Unknown symbolsaa7134_devlistsaa7134_empress: Unknown symbolsaa7134_common_ioctlsaa7134_empress: Unknown symbolsaa7134_boardssaa7134_empress: Unknown symbolsaa7134_ts_registersaa7134_empress: Unknown symbolsaa7134_ts_qopssaa7134_empress: Unknown symbolsaa7134_i2c_call_clientssaa7134_empress: Unknown symbolsaa7134_ts_unregistersaa7134_alsa: Unknown symbolsaa7134_tvaudio_setmutesaa7134_alsa: Unknown symbolsaa_dsp_writelsaa7134_alsa: Unknown symbolsaa7134_devlistsaa7134_alsa: Unknown symbolsaa7134_pgtable_allocsaa7134_alsa: Unknown symbolsaa7134_pgtable_buildsaa7134_alsa: Unknown symbolsaa7134_pgtable_freesaa7134_alsa: Unknown symbolsaa7134_dmasound_initsaa7134_alsa: Unknown symbolsaa7134_dmasound_exitsaa7134_alsa: Unknown symbolsaa7134_set_dmabits
saa7134 ALSA driver for DMA sound loaded
saa7134[0]/alsa: saa7134[0] at0xe5300000irq 5 registered as card -1 saa7134[1]/alsa: saa7134[1] at0xe5301000irq 9 registered as card -1Quoted 17 lines
* When using audio_debug=1 for saa7134, I've got the following :
saa7134[1]/audio: mute/input: nothing to do [mute=1,input=Television] saa7134[1]/audio: sound IF not in use, skipping scan saa7134[1]/audio: mute/input: nothing to do [mute=1,input=Television] saa7134[1]/audio: mute/input: nothing to do [mute=1,input=Television] saa7134[1]/audio: ctl_mute=0 automute=0 input=Television => mute=0 input=Television
saa7134[1]/audio: sound IF not in use, skipping scan saa7134[1]/audio: mute/input: nothing to do [mute=0,input=Television] saa7134[1]/audio: sound IF not in use, skipping scan saa7134[1]/audio: mute/input: nothing to do [mute=0,input=Television] saa7134[1]/audio: ctl_mute=0 automute=1 input=Television => mute=1 input=Television
saa7134[1]/audio: sound IF not in use, skipping scan saa7134[1]/audio: ctl_mute=0 automute=0 input=Television => mute=0 input=TelevisionQuoted 2 lines
Did I mention I'm using 2.6.22.19 ?
Hi,
yes, that is the annoying part ;), but still fine, since others have been already restless on getting support with latest drivers on a 2.4.18 ! without to provide a single line of code themselves ...
Quoted 7 lines
This is completely different with you, but we have other issues too.
http://linuxtv.org/hg/v4l-dvb/rev/d6660f8c6dbb
You might try to clean your /media modules and try with that snapshot. Not compile tested for 2.6.22, but might fit. Click on bz2 or gz on top.
ok, I'll have a look at this asap
Quoted 5 lines
Of course, if not auto detected you can select each TV analog standard separately for each card you have, but selectable SECAM was new.
Do you have any progress on it or are you seriously asking me to look at a 2.6.22.19?
My concern is to use any kernel while having full support for my knc tv station dvr AND my Hauppauge HVR 1300 ... that is, sound and mpeg compression
I was using a 2.6.16.29 'til now, with an old v4l (not v4l-dvb) snapshot so ... if I can still use my 2.6.16.29 and have support for my knc and my hauppauge within the same system, I'll be the happiest man (changing kernel is not an idea we like since by doing that we'll need time to test uptime equipments before releasing a new version of our products, ...)
2.6.22.19 is not mandatory but I know some things changed between 2.6.16 and recent kernels regarding modules (synopsis of some functions changed, ...) so adapting a recent snapshot against 2.6.16 might be painful ...
Quoted 3 lines
You might remember, I'm interested at the point, the encoder gave up.
huhu, I know that
I'll build 2.6.16 to 2.6.21 kernels this morning to see if my knc have sound in any of them with the modules included in the kernels (i.e I won't use my 2005 v4l snapshot) and let you know
what do you mean by "the encoder gave up" ?
Quoted 3 lines
Cheers,
Hermann
Regards
Signature · 8 lines
CAND Frederic Product Manager ANEVIA _______________________________________________ linux-dvb mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 163 lines · Frederic CAND
Quoted 132 lines · hermann pitton
Am Mittwoch, den 30.04.2008, 16:45 +0200 schrieb Frederic CAND:
Quoted 123 lines
Quoted 105 lines · Frederic CAND
Quoted 71 lines · Frederic CAND
Quoted 45 lines · hermann pitton
Am Dienstag, den 29.04.2008, 14:18 +0200 schrieb Frederic CAND:
Quoted 44 lines
Quoted 28 lines · hermann pitton
Hi Frederic,
Am Dienstag, den 29.04.2008, 11:09 +0200 schrieb Frederic CAND:
Quoted 8 lines
Dear all,
I recently had to change v4l drivers to support my WinTV HVR 1300. I have issues making my HVR work but that's not the point here. My problem is that since I updated kernel + drivers, I can't manage to make sound work when I'm using the tuner input. Sound jack input works when I'm using SVideo or Composite Video, but not when I'm using tuner.
Quoted 4 lines
Here are the options I'm using
tuner : port2=0
saa7134: oss=1 disable_ir=1
saa7134-oss: rate=48000the rate=48000 is only valid for external analog input and disables sound from tuner. Have a look at the saa7134-oss mixer under such conditions.
You must use default rate of 32000 for dma sound from tuner.
The saa7134-oss is also soon deprecated and replaced by saa7134-alsa.
If you are considering using recent v4l-dvb mercurial stuff, which should be best for the HVR1300 and reporting bugs on saa7134-empress, you might still have your old saa7134-oss module around and some others like the old
video_bufnow loaded, since not deleted on upgrade.Quoted 5 lines
After make rmmod and rminstall with current v4l-dvb you should delete such remaining modules on older kernels too before make install.
Cheers,
Hermannhum I used to set rate to 48000 with my old 2005 july snapshot and it was working even with tuner ... but ok I'll try 32000
i've tried alsa and I had the same results, that is no sound with tuner but line in sound with composite and svideo
do I need some special stuffs compiled in my kernel except fromconfig_snd? about old modules still loaded this can't be since I build my system from scratch each time i try a new kernel / driver into an ext2 file, which I put on a 32MB flash disk and boot on it ... so I'm sure I'm not using my old v4l snapshot, but the 2.6.22.19 v4l driversQuoted 2 lines
Quoted 1 line
I'll let you know if I can make it work
Ah, you are in France!
yeah!
Quoted 3 lines
Try "modinfo saa7134". Due to unresolvable auto detection issues between different SECAM standards there was a secam= either DK, L or Lc option introduced.
huhu... but my system has to work worldwide ... so a module option is not a good idea, because it does not only depends on the country, but also if my customer is using a signal modulator or not, ... and I have two cards in my system, and I want to be able to select a certain SECAM mode with the first one, and another mode with the second card Actually I'm selecting secam L, DK or BG with an ioctl cause my card can handle them (tested and working with older
drivers/kernels)Quoted 9 lines
Anything else then 32000Hz sampling rate for TV is wrong currently and you get that input disabled on saa7134-oss mixer. Yes, it was once possible, but not intended, to use 48000 also for TV/Video on saa7134 chips, but gave very poor and crackling sound and is wrong.
The current saa7134-alsa is simpler to use and also uses an exported mute symbol from saa7134-tvaudio. Default distribution settings are sufficient. On recent Ubutu releases seem to be problems with an out of tree alsa there.
Quoted 9 lines
Ok I'll see with this rate thing and let you know
Quoted 5 lines
Cheers,
HermannGreetings.
I still have nothing with oss and rate=32000, with alsa, or with secam=l Anyway, some more informations :
* I've got the following error messages on saa7134 module insertion
saa7134_empress: Unknown symbolsaa7134_devlistsaa7134_empress: Unknown symbolsaa7134_common_ioctlsaa7134_empress: Unknown symbolsaa7134_boardssaa7134_empress: Unknown symbolsaa7134_ts_registersaa7134_empress: Unknown symbolsaa7134_ts_qopssaa7134_empress: Unknown symbolsaa7134_i2c_call_clientssaa7134_empress: Unknown symbolsaa7134_ts_unregistersaa7134_alsa: Unknown symbolsaa7134_tvaudio_setmutesaa7134_alsa: Unknown symbolsaa_dsp_writelsaa7134_alsa: Unknown symbolsaa7134_devlistsaa7134_alsa: Unknown symbolsaa7134_pgtable_allocsaa7134_alsa: Unknown symbolsaa7134_pgtable_buildsaa7134_alsa: Unknown symbolsaa7134_pgtable_freesaa7134_alsa: Unknown symbolsaa7134_dmasound_initsaa7134_alsa: Unknown symbolsaa7134_dmasound_exitsaa7134_alsa: Unknown symbolsaa7134_set_dmabits
saa7134 ALSA driver for DMA sound loaded
saa7134[0]/alsa: saa7134[0] at0xe5300000irq 5 registered as card -1 saa7134[1]/alsa: saa7134[1] at0xe5301000irq 9 registered as card -1Quoted 17 lines
* When using audio_debug=1 for saa7134, I've got the following :
saa7134[1]/audio: mute/input: nothing to do [mute=1,input=Television] saa7134[1]/audio: sound IF not in use, skipping scan saa7134[1]/audio: mute/input: nothing to do [mute=1,input=Television] saa7134[1]/audio: mute/input: nothing to do [mute=1,input=Television] saa7134[1]/audio: ctl_mute=0 automute=0 input=Television => mute=0 input=Television
saa7134[1]/audio: sound IF not in use, skipping scan saa7134[1]/audio: mute/input: nothing to do [mute=0,input=Television] saa7134[1]/audio: sound IF not in use, skipping scan saa7134[1]/audio: mute/input: nothing to do [mute=0,input=Television] saa7134[1]/audio: ctl_mute=0 automute=1 input=Television => mute=1 input=Television
saa7134[1]/audio: sound IF not in use, skipping scan saa7134[1]/audio: ctl_mute=0 automute=0 input=Television => mute=0 input=TelevisionQuoted 2 lines
Did I mention I'm using 2.6.22.19 ?
Hi,
yes, that is the annoying part ;), but still fine, since others have been already restless on getting support with latest drivers on a 2.4.18 ! without to provide a single line of code themselves ...
Quoted 7 lines
This is completely different with you, but we have other issues too.
http://linuxtv.org/hg/v4l-dvb/rev/d6660f8c6dbb
You might try to clean your /media modules and try with that snapshot. Not compile tested for 2.6.22, but might fit. Click on bz2 or gz on top.
ok, I'll have a look at this asap
Quoted 5 lines
Of course, if not auto detected you can select each TV analog standard separately for each card you have, but selectable SECAM was new.
Do you have any progress on it or are you seriously asking me to look at a 2.6.22.19?
My concern is to use any kernel while having full support for my knc tv station dvr AND my Hauppauge HVR 1300 ... that is, sound and mpeg compression
I was using a 2.6.16.29 'til now, with an old v4l (not v4l-dvb) snapshot so ... if I can still use my 2.6.16.29 and have support for my knc and my hauppauge within the same system, I'll be the happiest man (changing kernel is not an idea we like since by doing that we'll need time to test uptime equipments before releasing a new version of our products, ...)2.6.22.19 is not mandatory but I know some things changed between 2.6.16 and recent kernels regarding modules (synopsis of some functions changed, ...) so adapting a recent snapshot against 2.6.16 might be painful ...
Quoted 7 lines
Quoted 2 lines
You might remember, I'm interested at the point, the encoder gave up.
huhu, I know that
I'll build 2.6.16 to 2.6.21 kernels this morning to see if my knc have sound in any of them with the modules included in the kernels (i.e I won't use my 2005 v4l snapshot) and let you know
I can't get sound when selecting tuner with drivers included in kernel 2.6.16.29 ... whether I use alsa or oss
options used :
tda9887: port2=0
saa7134-oss : rate=32000 or rate=48000 (same results)
saa7134: disable_ir=1 oss=1
or
tda9887: port2=0
saa7134: disable_ir=1 alsa=1
I tried without port2=0, same results ...
Quoted 9 lines
what do you mean by "the encoder gave up" ?
Quoted 3 lines
Cheers,
HermannRegards
Signature · 8 lines
CAND Frederic Product Manager ANEVIA _______________________________________________ linux-dvb mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 176 lines · Frederic CAND
Quoted 161 lines · Frederic CAND
Quoted 132 lines · hermann pitton
Am Mittwoch, den 30.04.2008, 16:45 +0200 schrieb Frederic CAND:
Quoted 123 lines
Quoted 105 lines · Frederic CAND
Quoted 71 lines · Frederic CAND
Quoted 45 lines · hermann pitton
Am Dienstag, den 29.04.2008, 14:18 +0200 schrieb Frederic CAND:
Quoted 44 lines
Quoted 28 lines · hermann pitton
Hi Frederic,
Am Dienstag, den 29.04.2008, 11:09 +0200 schrieb Frederic CAND:
Quoted 8 lines
Dear all,
I recently had to change v4l drivers to support my WinTV HVR 1300. I have issues making my HVR work but that's not the point here. My problem is that since I updated kernel + drivers, I can't manage to make sound work when I'm using the tuner input. Sound jack input works when I'm using SVideo or Composite Video, but not when I'm using tuner.
Quoted 4 lines
Here are the options I'm using
tuner : port2=0
saa7134: oss=1 disable_ir=1
saa7134-oss: rate=48000the rate=48000 is only valid for external analog input and disables sound from tuner. Have a look at the saa7134-oss mixer under such conditions.
You must use default rate of 32000 for dma sound from tuner.
The saa7134-oss is also soon deprecated and replaced by saa7134-alsa.
If you are considering using recent v4l-dvb mercurial stuff, which should be best for the HVR1300 and reporting bugs on saa7134-empress, you might still have your old saa7134-oss module around and some others like the old
video_bufnow loaded, since not deleted on upgrade.Quoted 5 lines
After make rmmod and rminstall with current v4l-dvb you should delete such remaining modules on older kernels too before make install.
Cheers,
Hermannhum I used to set rate to 48000 with my old 2005 july snapshot and it was working even with tuner ... but ok I'll try 32000
i've tried alsa and I had the same results, that is no sound with tuner but line in sound with composite and svideo
do I need some special stuffs compiled in my kernel except fromconfig_snd? about old modules still loaded this can't be since I build my system from scratch each time i try a new kernel / driver into an ext2 file, which I put on a 32MB flash disk and boot on it ... so I'm sure I'm not using my old v4l snapshot, but the 2.6.22.19 v4l driversQuoted 2 lines
Quoted 1 line
I'll let you know if I can make it work
Ah, you are in France!
yeah!
Quoted 3 lines
Try "modinfo saa7134". Due to unresolvable auto detection issues between different SECAM standards there was a secam= either DK, L or Lc option introduced.
huhu... but my system has to work worldwide ... so a module option is not a good idea, because it does not only depends on the country, but also if my customer is using a signal modulator or not, ... and I have two cards in my system, and I want to be able to select a certain SECAM mode with the first one, and another mode with the second card Actually I'm selecting secam L, DK or BG with an ioctl cause my card can handle them (tested and working with older
drivers/kernels)Quoted 9 lines
Anything else then 32000Hz sampling rate for TV is wrong currently and you get that input disabled on saa7134-oss mixer. Yes, it was once possible, but not intended, to use 48000 also for TV/Video on saa7134 chips, but gave very poor and crackling sound and is wrong.
The current saa7134-alsa is simpler to use and also uses an exported mute symbol from saa7134-tvaudio. Default distribution settings are sufficient. On recent Ubutu releases seem to be problems with an out of tree alsa there.
Quoted 9 lines
Ok I'll see with this rate thing and let you know
Quoted 5 lines
Cheers,
HermannGreetings.
I still have nothing with oss and rate=32000, with alsa, or with secam=l Anyway, some more informations :
* I've got the following error messages on saa7134 module insertion
saa7134_empress: Unknown symbolsaa7134_devlistsaa7134_empress: Unknown symbolsaa7134_common_ioctlsaa7134_empress: Unknown symbolsaa7134_boardssaa7134_empress: Unknown symbolsaa7134_ts_registersaa7134_empress: Unknown symbolsaa7134_ts_qopssaa7134_empress: Unknown symbolsaa7134_i2c_call_clientssaa7134_empress: Unknown symbolsaa7134_ts_unregistersaa7134_alsa: Unknown symbolsaa7134_tvaudio_setmutesaa7134_alsa: Unknown symbolsaa_dsp_writelsaa7134_alsa: Unknown symbolsaa7134_devlistsaa7134_alsa: Unknown symbolsaa7134_pgtable_allocsaa7134_alsa: Unknown symbolsaa7134_pgtable_buildsaa7134_alsa: Unknown symbolsaa7134_pgtable_freesaa7134_alsa: Unknown symbolsaa7134_dmasound_initsaa7134_alsa: Unknown symbolsaa7134_dmasound_exitsaa7134_alsa: Unknown symbolsaa7134_set_dmabits
saa7134 ALSA driver for DMA sound loaded
saa7134[0]/alsa: saa7134[0] at0xe5300000irq 5 registered as card -1 saa7134[1]/alsa: saa7134[1] at0xe5301000irq 9 registered as card -1Quoted 17 lines
* When using audio_debug=1 for saa7134, I've got the following :
saa7134[1]/audio: mute/input: nothing to do [mute=1,input=Television] saa7134[1]/audio: sound IF not in use, skipping scan saa7134[1]/audio: mute/input: nothing to do [mute=1,input=Television] saa7134[1]/audio: mute/input: nothing to do [mute=1,input=Television] saa7134[1]/audio: ctl_mute=0 automute=0 input=Television => mute=0 input=Television
saa7134[1]/audio: sound IF not in use, skipping scan saa7134[1]/audio: mute/input: nothing to do [mute=0,input=Television] saa7134[1]/audio: sound IF not in use, skipping scan saa7134[1]/audio: mute/input: nothing to do [mute=0,input=Television] saa7134[1]/audio: ctl_mute=0 automute=1 input=Television => mute=1 input=Television
saa7134[1]/audio: sound IF not in use, skipping scan saa7134[1]/audio: ctl_mute=0 automute=0 input=Television => mute=0 input=TelevisionQuoted 2 lines
Did I mention I'm using 2.6.22.19 ?
Hi,
yes, that is the annoying part ;), but still fine, since others have been already restless on getting support with latest drivers on a 2.4.18 ! without to provide a single line of code themselves ...
Quoted 7 lines
This is completely different with you, but we have other issues too.
http://linuxtv.org/hg/v4l-dvb/rev/d6660f8c6dbb
You might try to clean your /media modules and try with that snapshot. Not compile tested for 2.6.22, but might fit. Click on bz2 or gz on top.
ok, I'll have a look at this asap
Quoted 5 lines
Of course, if not auto detected you can select each TV analog standard separately for each card you have, but selectable SECAM was new.
Do you have any progress on it or are you seriously asking me to look at a 2.6.22.19?
My concern is to use any kernel while having full support for my knc tv station dvr AND my Hauppauge HVR 1300 ... that is, sound and mpeg compression
I was using a 2.6.16.29 'til now, with an old v4l (not v4l-dvb) snapshot so ... if I can still use my 2.6.16.29 and have support for my knc and my hauppauge within the same system, I'll be the happiest man (changing kernel is not an idea we like since by doing that we'll need time to test uptime equipments before releasing a new version of our products, ...)2.6.22.19 is not mandatory but I know some things changed between 2.6.16 and recent kernels regarding modules (synopsis of some functions changed, ...) so adapting a recent snapshot against 2.6.16 might be painful ...
Quoted 6 lines
Quoted 2 lines
You might remember, I'm interested at the point, the encoder gave up.
huhu, I know that
I'll build 2.6.16 to 2.6.21 kernels this morning to see if my knc have sound in any of them with the modules included in the kernels (i.e I won't use my 2005 v4l snapshot) and let you knowI can't get sound when selecting tuner with drivers included in kernel 2.6.16.29 ... whether I use alsa or oss
options used :
tda9887: port2=0
saa7134-oss : rate=32000 or rate=48000 (same results)
saa7134: disable_ir=1 oss=1
Quoted 17 lines
or
tda9887: port2=0
saa7134: disable_ir=1 alsa=1I tried without port2=0, same results ...
Quoted 9 lines
what do you mean by "the encoder gave up" ?
Quoted 3 lines
Cheers,
HermannRegards
tests results :
* 2.6.12.6
sound working with tuner, saa7134 options are oss=1 oss_rate=48000 (32000 works too)
* 2.6.13.5
Unable to handle kernel paging request at virtual address ... Modules linked in: saa7134_empress saa7134 ...
ok !!!!
* 2.6.14.7
------------[ cut here ]------------ kernel BUG at <bad filename>:57323! invalid operand: 0000 [#1] Modules linked in: saa7134_empress saa7134 .... [...] Code: 07 83 c4 08 c3 8d 76 00 8b 42 08 40 78 1d b8 ff ff ff ff 89 44 24
04 c7 04 24 10 00 00 00 e8 15 07 ff ff 83 c4 08 c3 0f 0b eb cb <0f> 0b eb df 89 f6 8d bc 27 00 00 00 00 83 ec 20 89 74 24 14 8b
<1>Fixing recursive fault but reboot is needed!
huhum !!!
* 2.6.15.7
does not crach, but no sound when using tuner, whether I use rate=32000 or rate=48000 ... oss part has been moved to a new module : saa7134-oss ...
Signature · 8 lines
CAND Frederic Product Manager ANEVIA _______________________________________________ linux-dvb mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 129 lines · hermann pitton
Am Mittwoch, den 30.04.2008, 16:45 +0200 schrieb Frederic CAND:
Quoted 123 lines
Quoted 105 lines · Frederic CAND
Quoted 71 lines · Frederic CAND
Quoted 45 lines · hermann pitton
Am Dienstag, den 29.04.2008, 14:18 +0200 schrieb Frederic CAND:
Quoted 44 lines
Quoted 28 lines · hermann pitton
Hi Frederic,
Am Dienstag, den 29.04.2008, 11:09 +0200 schrieb Frederic CAND:
Quoted 8 lines
Dear all,
I recently had to change v4l drivers to support my WinTV HVR 1300. I have issues making my HVR work but that's not the point here. My problem is that since I updated kernel + drivers, I can't manage to make sound work when I'm using the tuner input. Sound jack input works when I'm using SVideo or Composite Video, but not when I'm using tuner.
Quoted 4 lines
Here are the options I'm using
tuner : port2=0
saa7134: oss=1 disable_ir=1
saa7134-oss: rate=48000the rate=48000 is only valid for external analog input and disables sound from tuner. Have a look at the saa7134-oss mixer under such conditions.
You must use default rate of 32000 for dma sound from tuner.
The saa7134-oss is also soon deprecated and replaced by saa7134-alsa.
If you are considering using recent v4l-dvb mercurial stuff, which should be best for the HVR1300 and reporting bugs on saa7134-empress, you might still have your old saa7134-oss module around and some others like the old
video_bufnow loaded, since not deleted on upgrade.Quoted 5 lines
After make rmmod and rminstall with current v4l-dvb you should delete such remaining modules on older kernels too before make install.
Cheers,
Hermannhum I used to set rate to 48000 with my old 2005 july snapshot and it was working even with tuner ... but ok I'll try 32000
i've tried alsa and I had the same results, that is no sound with tuner but line in sound with composite and svideo
do I need some special stuffs compiled in my kernel except fromconfig_snd? about old modules still loaded this can't be since I build my system from scratch each time i try a new kernel / driver into an ext2 file, which I put on a 32MB flash disk and boot on it ... so I'm sure I'm not using my old v4l snapshot, but the 2.6.22.19 v4l driversQuoted 2 lines
Quoted 1 line
I'll let you know if I can make it work
Ah, you are in France!
yeah!
Quoted 3 lines
Try "modinfo saa7134". Due to unresolvable auto detection issues between different SECAM standards there was a secam= either DK, L or Lc option introduced.
huhu... but my system has to work worldwide ... so a module option is not a good idea, because it does not only depends on the country, but also if my customer is using a signal modulator or not, ... and I have two cards in my system, and I want to be able to select a certain SECAM mode with the first one, and another mode with the second card Actually I'm selecting secam L, DK or BG with an ioctl cause my card can handle them (tested and working with older
drivers/kernels)Quoted 9 lines
Anything else then 32000Hz sampling rate for TV is wrong currently and you get that input disabled on saa7134-oss mixer. Yes, it was once possible, but not intended, to use 48000 also for TV/Video on saa7134 chips, but gave very poor and crackling sound and is wrong.
The current saa7134-alsa is simpler to use and also uses an exported mute symbol from saa7134-tvaudio. Default distribution settings are sufficient. On recent Ubutu releases seem to be problems with an out of tree alsa there.
Quoted 9 lines
Ok I'll see with this rate thing and let you know
Quoted 5 lines
Cheers,
HermannGreetings.
I still have nothing with oss and rate=32000, with alsa, or with secam=l Anyway, some more informations :
* I've got the following error messages on saa7134 module insertion
saa7134_empress: Unknown symbolsaa7134_devlistsaa7134_empress: Unknown symbolsaa7134_common_ioctlsaa7134_empress: Unknown symbolsaa7134_boardssaa7134_empress: Unknown symbolsaa7134_ts_registersaa7134_empress: Unknown symbolsaa7134_ts_qopssaa7134_empress: Unknown symbolsaa7134_i2c_call_clientssaa7134_empress: Unknown symbolsaa7134_ts_unregistersaa7134_alsa: Unknown symbolsaa7134_tvaudio_setmutesaa7134_alsa: Unknown symbolsaa_dsp_writelsaa7134_alsa: Unknown symbolsaa7134_devlistsaa7134_alsa: Unknown symbolsaa7134_pgtable_allocsaa7134_alsa: Unknown symbolsaa7134_pgtable_buildsaa7134_alsa: Unknown symbolsaa7134_pgtable_freesaa7134_alsa: Unknown symbolsaa7134_dmasound_initsaa7134_alsa: Unknown symbolsaa7134_dmasound_exitsaa7134_alsa: Unknown symbolsaa7134_set_dmabits
saa7134 ALSA driver for DMA sound loaded
saa7134[0]/alsa: saa7134[0] at0xe5300000irq 5 registered as card -1 saa7134[1]/alsa: saa7134[1] at0xe5301000irq 9 registered as card -1Quoted 17 lines
* When using audio_debug=1 for saa7134, I've got the following :
saa7134[1]/audio: mute/input: nothing to do [mute=1,input=Television] saa7134[1]/audio: sound IF not in use, skipping scan saa7134[1]/audio: mute/input: nothing to do [mute=1,input=Television] saa7134[1]/audio: mute/input: nothing to do [mute=1,input=Television] saa7134[1]/audio: ctl_mute=0 automute=0 input=Television => mute=0 input=Television
saa7134[1]/audio: sound IF not in use, skipping scan saa7134[1]/audio: mute/input: nothing to do [mute=0,input=Television] saa7134[1]/audio: sound IF not in use, skipping scan saa7134[1]/audio: mute/input: nothing to do [mute=0,input=Television] saa7134[1]/audio: ctl_mute=0 automute=1 input=Television => mute=1 input=Television
saa7134[1]/audio: sound IF not in use, skipping scan saa7134[1]/audio: ctl_mute=0 automute=0 input=Television => mute=0 input=TelevisionQuoted 2 lines
Did I mention I'm using 2.6.22.19 ?
Hi,
Quoted 7 lines
yes, that is the annoying part ;), but still fine, since others have been already restless on getting support with latest drivers on a 2.4.18 ! without to provide a single line of code themselves ...
This is completely different with you, but we have other issues too.
I tried that, and yes I have sound with tuner !!!
just using alsa=1 for saa7134
and my HVR is working too (except for sound and tuner but it's another thread) so I'll stick to that
many thanks !!!!
Quoted 20 lines
You might try to clean your /media modules and try with that snapshot. Not compile tested for 2.6.22, but might fit. Click on bz2 or gz on top.
Of course, if not auto detected you can select each TV analog standard separately for each card you have, but selectable SECAM was new.
Do you have any progress on it or are you seriously asking me to look at a 2.6.22.19?
You might remember, I'm interested at the point, the encoder gave up.
Cheers,
Hermann
Signature · 8 lines
CAND Frederic Product Manager ANEVIA _______________________________________________ linux-dvb mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb