Skip to contentSkip to conversation

Strange C3/C4 sleep state behaviour

DISCUSSION Pascal Brückner 2 participants 2 messages May 15, 2008

lore
Share & tools
lore
#0 lore raw

Hello!

I'm recompiling my kernel recently to optimize the power usage of my laptop (IBM ThinkPad X31). So far, my most efficient kernel at the moment is a self-compiled 2.6.22 with phc patches for undervolting, suspend2/tuxonice and hrtimers patches to force HPET on my ICH4-M chipset.

Because everyone says, that newer kernel revisions are much more energy efficient than my 2.6.22, i tried to compile one to reach at least the energy usage of my recent kernel.
Sadly, this doesn't work because of only one issue:
With activated wireless networking (atheros chipset with recent madwifi driver) i'm losing much energy due to the fact, that my cpu is significant more in C2 state than in C3/C4.

With 2.6.22 the Pentium M reaches according to powertop 70-80% C3/C4 sleep states, but with newer kernels only 30-40% are left with the same kernel config and the same patches (and same userland, of course). The result is a 20 to 30 minutes reduced runtime of a laptop and a frustrated user, who has no more ideas what module or setting could cause this behaviour.

I've tried a stable 2.6.23, 2.6.24 last vanilla and from Debian repository and the recent 2.6.26-rc2, with and without zen-sources (patchset).

The people in madwifi IRC already told me that it may be a kernel issue, so my last hope is this mailing list.

System specs:

IBM ThinkPad X31
Centrino (1st generation)
Banias Pentium M 1.4 GHz

part of lspci output

00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81) 00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01)
02:02.0 Ethernet controller: Atheros Communications Inc. AR5212 802.11abg NIC (rev 01)

Powertop output kernel 2.6.22:
Cn Verweildauer P-States (Frequenzen)
C0 (Prozessor läuft) ( 1,0%) 1400 MHz 100,0%

C1                0,0ms ( 0,0%)         1200 MHz     0,0%
C2                7,0ms (16,0%)         1000 MHz     0,0%
C3               15,9ms (83,0%)          800 MHz     0,0%

Aufwachen pro Sekunde : 75,1 Intervall: 15,0s
Stromverbrauch (nach ACPI): 11,4W (3,5 Std.)

Häufigste Ursachen für das Aufwachen:
45,3% ( 32,1) <interrupt> : uhci_hcd:usb1, uhci_hcd:usb2,
uhci_hcd:usb3, ehci_hcd:usb4, ohci1394, yenta, yenta, wifi0, Intel 82801DB-ICH4 Modem, Intel 82801DB-IC
25,4% ( 18,0) <interrupt> : acpi

   7,1% (  5,0)               tpb : do_nanosleep (hrtimer_wakeup)
   4,2% (  3,0)           xfsbufd : schedule_timeout (process_timeout)
   3,8% (  2,7)       <interrupt> : ide0

Powertop output kernel 2.6.26-rc2:
Cn Verweildauer P-States (Frequenzen)
C0 (Prozessor läuft) ( 2,0%) 1400 MHz 0,0%

C1                0,0ms ( 0,0%)         1200 MHz     0,0%
C2               18,4ms (73,8%)         1000 MHz     0,0%

C3 11,2ms (24,1%) 600 MHz 100,0%

Aufwachen pro Sekunde : 61,6 Intervall: 15,0s
Stromverbrauch (nach ACPI): 13,0W (3,0 Std.)

Häufigste Ursachen für das Aufwachen:
50,6% ( 31,1) <interrupt> : uhci_hcd:usb1, uhci_hcd:usb2,
uhci_hcd:usb3, ehci_hcd:usb4, Intel 82801DB-ICH4 Modem, Intel 82801DB-ICH4, yenta, yenta, ohci1394, wif

   8,1% (  5,0)               tpb : do_nanosleep (hrtimer_wakeup)
   5,7% (  3,5)       <interrupt> : acpi
   4,9% (  3,0)           xfsbufd : schedule_timeout (process_timeout)
   4,9% (  3,0)           xfsaild : schedule_timeout (process_timeout)

Thanks in advance!

Pascal

#1 lore raw
Quoted 7 lines · Pascal Brückner

Hello!

I'm recompiling my kernel recently to optimize the power usage of my laptop (IBM ThinkPad X31). So far, my most efficient kernel at the moment is a self-compiled 2.6.22 with phc patches for undervolting, suspend2/tuxonice and hrtimers patches to force HPET on my ICH4-M chipset.

Quoted 7 lines

Because everyone says, that newer kernel revisions are much more energy efficient than my 2.6.22, i tried to compile one to reach at least the energy usage of my recent kernel.
Sadly, this doesn't work because of only one issue:
With activated wireless networking (atheros chipset with recent madwifi driver) i'm losing much energy due to the fact, that my cpu is significant more in C2 state than in C3/C4.

Do you have CONFIG_CPU_IDLE enabled? That made a huge difference for me. Before that was available, _disabling_ CONFIG_NO_HZ also helped when wifi was enabled (but IIRC made things worse with wifi disabled).

Björn