vid&pid problems in usb_probe()
I am writting an usb driver.You know function usb_probe(...) is used to determine whether the usbdevices just pluged in is what the driver is for.
The Vid and Pid of my usb device are 0x1111 and 0x0000 respectively.
the program is :
static void* usb_probe(struct usb_device *udev, unsigned int ifnum, const struct usb_device_id *id)
{
..............
..............
printk("<1>Vid:%x\nPid:%x\n",udev->descriptor.idVendor,udev->descriptor.idProduct);
if ((udev->descriptor.idVendor!=0x1111)
||(udev->descriptor.idProduct!=0x0000)) return NULL;
..............
}when I plug the device whose vid & pid is 0x1111 & 0x0000 respectively. this Module displayed
Vid:0
Pid:201
usb.c ........ no active driver for this device;
and when I plug another device , I also got wrong vid & pid.
But when I wrote program as below:
__u16 tmp=0x1111;printk("<1>%x",tmp);
it can print "1111" on the screen. That means my syntax is correct. I mean, the problem may be at the data transfered into function usb_probe() Maybe data transfered into function usb_probe() is wrong.
I wonder where is the problem, how can i solve.
On Sat, 8 May 2004 11:48:44 +0800 (CST) <[email protected]> wrote:
| | | I am writting an usb driver.You know function usb_probe(...) is used to determine whether the usbdevices just pluged in is what the driver is for.
a. Please learn to use the Enter/Return key around character position 70 (or before) on each line.
b. what kernel version? (*always*)
c. You should ask this on the linux-usb-development mailing list:
[email protected]
| The Vid and Pid of my usb device are 0x1111 and 0x0000 respectively.
|
| the program is :
|
| static void* usb_probe(struct usb_device *udev, unsigned int ifnum, const struct usb_device_id *id)
| {
| ..............
| ..............
|
| printk("<1>Vid:%x\nPid:%x\n",udev->descriptor.idVendor,udev->descriptor.idProduct);
|
| if ((udev->descriptor.idVendor!=0x1111)
| ||(udev->descriptor.idProduct!=0x0000)) return NULL;
|
| ..............
| }
|
| when I plug the device whose vid & pid is 0x1111 & 0x0000 respectively.
| this Module displayed
|
|
| Vid:0
| Pid:201
|
| usb.c ........ no active driver for this device;
|
| and when I plug another device , I also got wrong vid & pid.
|
| But when I wrote program as below:
|
| __u16 tmp=0x1111;
| printk("<1>%x",tmp);
|
| it can print "1111" on the screen. That means my syntax is correct.
| I mean, the problem may be at the data transfered into function usb_probe()
| Maybe data transfered into function usb_probe() is wrong.
|
| I wonder where is the problem, how can i solve.Seeing more (or all) of your source code could help. I'm especially curious (suspicious) about your USB descriptor data structures.
--
~Randy