cpu/mips/Makefile: Split [CS]OBJS onto separate lines

U-Boot-Users Shinya Kuribayashi 1 participant 1 message May 24, 2008

lore

Share & tools

lore

Shinya Kuribayashi

author

2008-05-24 13:44 UTC #0 lore raw

Also get rid of some #ifdefs in *.c files.

Signed-off-by Shinya Kuribayashi <[email protected]>

---

 cpu/mips/Makefile          |   15 +++++++++------
 cpu/mips/asc_serial.c      |    3 ---
 cpu/mips/au1x00_eth.c      |    4 ----
 cpu/mips/au1x00_serial.c   |    4 ----
 cpu/mips/au1x00_usb_ohci.c |    2 +-
 5 files changed, 10 insertions(+), 18 deletions(-)

cpu/mips/Makefile +9 -6

index 29dd941..69cc16a 100644
@@ -25,13 +25,16 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(CPU).a
 
-START	= start.o
-COBJS	= asc_serial.o au1x00_serial.o au1x00_eth.o au1x00_usb_ohci.o \
-	  cpu.o cpu-probe.o interrupts.o incaip_clock.o
-SOBJS	= incaip_wdt.o cache.o
+SOBJS-y	= cache.o
+COBJS-y	= cpu.o cpu-probe.o interrupts.o
 
-SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+SOBJS-$(CONFIG_INCA_IP)	+= incaip_wdt.o
+COBJS-$(CONFIG_INCA_IP)	+= asc_serial.o incaip_clock.o
+COBJS-$(CONFIG_PURPLE)	+= asc_serial.o
+COBJS-$(CONFIG_SOC_AU1X00) += au1x00_eth.o au1x00_serial.o au1x00_usb_ohci.o
+
+SRCS	:= $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
 START	:= $(addprefix $(obj),$(START))
 
 all:	$(obj).depend $(START) $(LIB)

cpu/mips/asc_serial.c +0 -3

index 3498b61..be686c2 100644
@@ -4,8 +4,6 @@
 
 #include <config.h>
 
-#if defined(CONFIG_PURPLE) || defined(CONFIG_INCA_IP)
-
 #ifdef CONFIG_PURPLE
 #define	serial_init	asc_serial_init
 #define	serial_putc	asc_serial_putc

@@ -368,4 +366,3 @@ int serial_tstc (void)
 
     return res;
 }
-#endif /* CONFIG_PURPLE || CONFIG_INCA_IP */

cpu/mips/au1x00_eth.c +0 -4

index aeb9662..d0cf8e0 100644
@@ -23,8 +23,6 @@
  */
 #include <config.h>
 
-#ifdef CONFIG_SOC_AU1X00
-
 #if defined(CFG_DISCOVER_PHY)
 #error "PHY not supported yet"
 /* We just assume that we are running 100FD for now */

@@ -307,5 +305,3 @@ int au1x00_enet_initialize(bd_t *bis){
 
 	return 1;
 }
-
-#endif /* CONFIG_SOC_AU1X00 */

cpu/mips/au1x00_serial.c +0 -4

index ec10ac0..6309794 100644
@@ -26,9 +26,6 @@
  */
 
 #include <config.h>
-
-#ifdef CONFIG_SOC_AU1X00
-
 #include <common.h>
 #include <asm/au1x00.h>

@@ -132,4 +129,3 @@ int serial_tstc (void)
 	}
 	return 0;
 }
-#endif /* CONFIG_SOC_AU1X00 */

cpu/mips/au1x00_usb_ohci.c +1 -1

index e03b125..1ca8aaf 100644
@@ -35,7 +35,7 @@
 
 #include <config.h>
 
-#if defined(CONFIG_SOC_AU1X00) && defined(CONFIG_USB_OHCI)
+#ifdef CONFIG_USB_OHCI
 
 /* #include <pci.h> no PCI on the AU1x00 */