TechnoTrend S2-3200 CAM / CI
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 30 lines · Jelle De Loecker
manu schreef:
Quoted 4 lines · Jelle De Loecker
Quoted 3 lines
All I want to know is: is it as simple as inserting the CAM in my Technotrend's CI? Will the hardware do everything, or does
Multiproto
Quoted 3 lines
Quoted 2 lines
and VDR have some work, too?
I have a Canalsat (in the caribbean) subscription and, with MythTV
at
Quoted 1 line
least I just had to plug in the cam, put the subscription card in
it
Quoted 7 lines
and voila!
The TV application must "talk" to the cam; also there are some cams which are known not to work well/reliably with the TT CI. For my part I am more than happy with my aston crypt CAM which can decrypt two streams simultanueously, which means you can watch 2 channels (on different PC or using PIP) or record two, or watch one record one, just one restriction though: they have to be on thesame
Quoted 1 line
transponder.
I believe TV Vlaanderen uses SECA - Any problems with that one?
Oh, talking about multiple streams, what exactly describes a transponder? For example, when I use dvbstream to tunnel a DVB signal into VLC I can select a few other channels (6-7, on some BBC streams even 7-8 or more) from the "navigation" menu, is this the content of a
Quoted 3 lines
transponder? (Because that would mean there are on average about 6-7 channels on one transponder)
Or is it actually more?
Well I am no expert but the channels are dispatched on several transponders, how many depend on the bandwidth needed by each channel (I mean you can put more SD channels than HD channels). A dvb card receives the whole stream of one transponder and can, depending on hardware including the CAM if there is encryption, decode all channels. This is when you have only one tuner; indeed one tuner can tune on only one frequency, that is only one transponder. So if you want to be able to watch/record several channels without restriction, you need several cards.
Quoted 2 lines
Btw, what MythTV revision were you using again? (I badly want to get MythTV to work!)
I have been using the 0.21-fixes branch since a while. I know that it is not easy to compile it with the latest multiproto, hence mine is 2 months old I think. One more trick: I hacked the code to add 4MHz to the tuning frequency to be able to get good locks (this is not because of mythtv, scan/szap need that also).
HTH
Bye
Manu
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb