ip_rt_min_delay : why 2s by default?

Hi there,

I'm doing work on a IP routing protocol designed for mobility. During testing phase, I encounter some 2s delay when routing table are updated.

I compare the routing table (displayed by route -n) and the routing cache (displayed by route -Cn) and there was always a delay of 2s to propagate changes from the routing table to the routing cache. Hence, packet loss occurs.

Digging into the kernel source (net/ipv4/route.c), I found the ip_rt_min_delay variable which is indeed 2s. I changed it to 0 through /proc/sys/net/ipv4/route/min_delay and it seems that all my problems are gone.

Questions:

1/ Is it safe to put 0 in min_delay? I'd like to make sure that it will not trigger some bugs or inconsistencies later.

2/ If it is safe, then why it's not the default value? Is there a reason for 2s or is it simply a compromise that so far nobody cares about 2s delay?

Regards,
Benoit
PS: Test was done with a 2.6.21.6 kernel