Skip to contentSkip to conversation

Is there any working 802.11N USB Nic?

DISCUSSION Ken Mandelberg 3 participants 4 messages May 31, 2008 – Jun 2, 2008

lore
Share & tools
lore
#0 lore raw

Sorry for the newbie question. I have a real need to add a wireless usb nic to a Linux laptop that will run at 11N speeds. Is there anything that will work?

I have an Airlink AWLL6080 (Ralink 2870). Is there any native work for this chipset? I've tried ndiswrapper with an XP driver, but that only connects in G mode.

Is there any work related to a different 11N usb nic?

#1 lore raw
Quoted 3 lines · Ken Mandelberg

I have an Airlink AWLL6080 (Ralink 2870). Is there any native work for this chipset? I've tried ndiswrapper with an XP driver, but that only connects in G mode.

There are native drivers by Ralink for this chipset on their website. [1]. I don't know how well they work, though. Maybe the rt2x00-project will work on this once the current rt2x00 drivers are completely finished.

NDISWrapper should also support 802.1n, so start a new thread in the NDISWrapper support forum [2], if you need additional help.

[1] http://www.ralinktech.com/ralink/Home/Support/Linux.html
[2]
http://ndiswrapper.sourceforge.net/joomla/index.php?/component/option,com_fireboard/Itemid,34/

#2 lore raw
Quoted 8 lines · Andreas Gnau
Quoted 3 lines · Ken Mandelberg

I have an Airlink AWLL6080 (Ralink 2870). Is there any native work for this chipset? I've tried ndiswrapper with an XP driver, but that only connects in G mode.

There are native drivers by Ralink for this chipset on their website. [1]. I don't know how well they work, though. Maybe the rt2x00-project will work on this once the current rt2x00 drivers are completely finished.

Work is already in progress to port the legacy drivers to rt2x00, but due to lack of time this is going very slowely.

Quoted 12 lines

NDISWrapper should also support 802.1n, so start a new thread in the NDISWrapper support forum [2], if you need additional help.

[1] http://www.ralinktech.com/ralink/Home/Support/Linux.html
[2]
http://ndiswrapper.sourceforge.net/joomla/index.php?/component/option,com_fireboard/Itemid,34/
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#3 lore raw
In reply to Andreas Gnau

Andreas Gnau wrote, On 05/31/08 16:17:

Quoted 9 lines
Quoted 3 lines · Ken Mandelberg

I have an Airlink AWLL6080 (Ralink 2870). Is there any native work for this chipset? I've tried ndiswrapper with an XP driver, but that only connects in G mode.

There are native drivers by Ralink for this chipset on their website. [1]. I don't know how well they work, though. Maybe the rt2x00-project will work on this once the current rt2x00 drivers are completely finished.

Quoted 7 lines

NDISWrapper should also support 802.1n, so start a new thread in the NDISWrapper support forum [2], if you need additional help.

[1] http://www.ralinktech.com/ralink/Home/Support/Linux.html
[2]
http://ndiswrapper.sourceforge.net/joomla/index.php?/component/option,com_fireboard/Itemid,34/

Andreas, thanks for the tips. I didn't know about the native Ralink driver for the 2870. I've gone ahead an built it and tested it.

The access point can be either in b/g/n mode or N only mode. In b/g/n mode it connects at G. In N only mode it doesn't connect.

iwconfig doesn't have a "modu" parameter for 11n, so I don't force a modulation from the Linux side. Should I be somehow?