smc911x: Add AP325RXA board support
Subsystems (3)
This patch adds AP325RXA board support to scc911x driver.
Signed-off-by Yusuke Goda <[email protected]>
--- drivers/net/Kconfig | 2 +- drivers/net/smc911x.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/net/Kconfig +1 -1
@@ -955,7 +955,7 @@ config SMC911X tristate "SMSC LAN911[5678] support" select CRC32 select MII - depends on ARCH_PXA || SH_MAGIC_PANEL_R2 + depends on ARCH_PXA || SH_MAGIC_PANEL_R2 || SH_AP325RXA help This is a driver for SMSC's LAN911x series of Ethernet chipsets including the new LAN9115, LAN9116, LAN9117, and LAN9118.
drivers/net/smc911x.h +1 -1
@@ -37,7 +37,7 @@#define SMC_USE_16BIT 0#define SMC_USE_32BIT 1#define SMC_IRQ_SENSE IRQF_TRIGGER_FALLING -#elif defined(CONFIG_SH_MAGIC_PANEL_R2 ) +#elif defined(CONFIG_SH_MAGIC_PANEL_R2 ) || defined(CONFIG_SH_AP325RXA )#define SMC_USE_SH_DMA 0#define SMC_USE_16BIT 0#define SMC_USE_32BIT 1
Signature · 1 line
1.5.4.5
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi Magnus-san
Quoted 10 lines · Magnus Damm
Hi Goda-san,
Quoted 1 line · Yusuke.Goda
This patch adds AP325RXA board support to scc911x driver.
I posted a few patches recently (smc911x: Request bus width using platform data) that are conflicting with your patch. Hopefully my patches will be included in 2.6.27, and at that point we can modify the ap32x board code to add board specific configuration to the smc911x platform data.
I'm sorry I did not watch your patch.
With your patch, my patch was not necessary.
Thanks,
Goda