Skip to contentSkip to conversation

vesafb@1280x1024 used to work for me in 2.4.x

DISCUSSION Oncaphillis 1 participant 2 messages Jun 9, 2008

lore
Share & tools
lore
#0 lore raw

Hi,

I have a 1600x1024 LCD panel with a nvidia GeForce 7600 graphic card. Up until recently I used a 2.4.xx kernel and could happily convince it to use the vesafb at 1280x1024 res in vertical mode by adding "vga=775 fbcfbcon=rotate:3" as a kernel arg.

This stopped to work for me since 2.5.x. The vesafb prompts me for some dull resolutions (like 80x60 etc).

Note that 775 never showed up as a supported vesa mode. If I supplied any bogus vesa mode (e.g. vga=999999) the 2.4.x vesafb driver also only offered me the dull resolutions. But explicitly setting it to 775 worked.

Thank you very much indeed

O.

#1 lore raw

Oh !! This is so embarrassing !!
It's kernel 2.6.24 and 2.6.25 not 2.4.x and 2.5.x

Sorry

O.

Quoted 24 lines · Oncaphillis

Hi,

I have a 1600x1024 LCD panel with a nvidia GeForce 7600 graphic card. Up until recently I used a 2.4.xx kernel and could happily convince it to use the vesafb at 1280x1024 res in vertical mode by adding "vga=775 fbcfbcon=rotate:3" as a kernel arg.

This stopped to work for me since 2.5.x. The vesafb prompts me for some dull resolutions (like 80x60 etc).

Note that 775 never showed up as a supported vesa mode. If I supplied any bogus vesa mode (e.g. vga=999999) the 2.4.x vesafb driver also only offered me the dull resolutions. But explicitly setting it to 775 worked.

Thank you very much indeed

O.

Signature · 4 lines
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/