Mickey mouse voices on snd-intel8x0
Hi,
I have a Compaq Deskpro EN with PIII/866 recycled as a thin client. The problem was that sound on the thin client was played faster than it should.
I have Fedora 9/x86-64 on the main machine, so the thin client is LTSP5 that comes with F9.
I tried everything (acpi=off, etc) but the strange voice didn't get better. I discovered this in the dmesg:
intel8x0_measure_ac97_clock: measured 50895 usecs
intel8x0: measured clock 78 rejected
intel8x0: clocking to 48000
I looked at the current kernel sources and found the solution for that. I had to provide this for the thin client in /opt/ltsp/i386/etc/modprobe.conf :
options snd-intel8x0 ac97_clock=44100
# lspci -s 00:1f.5 00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97 Audio Controller (rev 02) # lspci -ns 00:1f.5 00:1f.5 0401: 8086:2445 (rev 02)
Best regards,
Zoltán Böszörményi
At Sat, 28 Jun 2008 19:42:15 +0200,
Quoted 10 lines · Zoltan Boszormenyi
Hi,
I have a Compaq Deskpro EN with PIII/866 recycled as a thin client. The problem was that sound on the thin client was played faster than it should.
I have Fedora 9/x86-64 on the main machine, so the thin client is LTSP5 that comes with F9.
I tried everything (acpi=off, etc) but the strange voice didn't get better. I discovered this in the dmesg:
Did this problem exist on the earlier kernel?
Quoted 2 lines
intel8x0_measure_ac97_clock: measured 50895 usecs
intel8x0: measured clock 78 rejected
This value is way too small than normal. It means that either the clocking or the calculation of the position in intel8x0_measure_ac97_clock() is wrong. Could you check what is the value if ichdev->position in that function?
Quoted 7 lines
intel8x0: clocking to 48000
I looked at the current kernel sources and found the solution for that. I had to provide this for the thin client in
/opt/ltsp/i386/etc/modprobe.conf:options snd-intel8x0 ac97_clock=44100
Usually it's a bit slower than that. SeeDocumentation/sound/alsa/ALSA-Configuration.txt.
thanks,
Takashi
Takashi Iwai írta:
Quoted 14 lines
At Sat, 28 Jun 2008 19:42:15 +0200,
Quoted 10 lines · Zoltan Boszormenyi
Hi,
I have a Compaq Deskpro EN with PIII/866 recycled as a thin client. The problem was that sound on the thin client was played faster than it should.
I have Fedora 9/x86-64 on the main machine, so the thin client is LTSP5 that comes with F9.
I tried everything (acpi=off, etc) but the strange voice didn't get better. I discovered this in the dmesg:
Quoted 2 lines
Did this problem exist on the earlier kernel?
IIRC, yes.
When I have set up LTSP5, both the client and the host had a 2.6.24.x kernel.
Don't ask the exact version, though.
Quoted 9 lines
Quoted 3 lines
intel8x0_measure_ac97_clock: measured 50895 usecs
intel8x0: measured clock 78 rejectedThis value is way too small than normal. It means that either the clocking or the calculation of the position in
intel8x0_measure_ac97_clock()is wrong. Could you check what is the value ifichdev->positionin that function?
How? Is there a module option for such debug info?
Quoted 6 lines
Quoted 6 lines
intel8x0: clocking to 48000
I looked at the current kernel sources and found the solution for that. I had to provide this for the thin client in
/opt/ltsp/i386/etc/modprobe.conf:
Quoted 6 lines
Quoted 2 lines
options snd-intel8x0 ac97_clock=44100
Usually it's a bit slower than that. See
Documentation/sound/alsa/ALSA-Configuration.txt.
Thanks.
Quoted 6 lines
thanks,
Takashi
At Sun, 13 Jul 2008 08:39:33 +0200,
Quoted 16 lines · Zoltan Boszormenyi
Takashi Iwai írta:
Quoted 14 lines
At Sat, 28 Jun 2008 19:42:15 +0200,
Quoted 10 lines · Zoltan Boszormenyi
Hi,
I have a Compaq Deskpro EN with PIII/866 recycled as a thin client. The problem was that sound on the thin client was played faster than it should.
I have Fedora 9/x86-64 on the main machine, so the thin client is LTSP5 that comes with F9.
I tried everything (acpi=off, etc) but the strange voice didn't get better. I discovered this in the dmesg:
Quoted 7 lines
Quoted 2 lines
Did this problem exist on the earlier kernel?
IIRC, yes.
When I have set up LTSP5, both the client and the host had a 2.6.24.x kernel.
Don't ask the exact version, though.
Any older kernel?
Quoted 11 lines
Quoted 9 lines
Quoted 3 lines
intel8x0_measure_ac97_clock: measured 50895 usecs
intel8x0: measured clock 78 rejectedThis value is way too small than normal. It means that either the clocking or the calculation of the position in
intel8x0_measure_ac97_clock()is wrong. Could you check what is the value ifichdev->positionin that function?How? Is there a module option for such debug info?
No, just add printk() appropriately.
thanks,
Takashi