hwmon/pc87360 individual alarm files
v2 cover hwmon/pc87360 individual alarm files
in this 2nd rev of the patchset (against -rc8), the new voltage and temp alarms
work as they should; setting min & max above and below input results in alarm activation.
- My board has no thermistors, so I cannot test them.
- The temp units have temp[1-3]-fault files, 2 of them are active on my soekris.
- The therm(istor) units temp[4-6] do not have one, since they use voltage units 11-14,
which doesnt support OPEN bit (but does have an overtemp bit on
v-units 11-14)
- temp_alarms and in_alarms do *not* work.
They never did, IIRC, in any case theyre not touched in this patchset. Are they properly subject to deprecation and eventual removal ? Or do they work on lesser pc8736x chips ?
(theres some vague hint of diffs where x=[56] in sec 11.2.3)
- All patches pass scripts/checkpatch.pl
Jim Cromie (6):
hwmon/pc87360 separate alarm files - define some constants hwmon/pc87360 separate alarm files - add in-min/max-alarms hwmon/pc87360 separate alarm files - add
temp-min/max/crit/fault-alarms
hwmon/pc87360 separate alarm files - define LDNI_MAX const hwmon/pc87360 separate alarm files - add dev_dbg help hwmon/pc87360 separate alarm files - add therm-min/max/crit-alarms
drivers/hwmon/pc87360.c | 244 +++++++++++++++++++++++++++++++++++++++++++---- 1 files changed, 223 insertions(+), 21 deletions(-)
Having worked thru the patches again, ISTM that 1st patch might have an aesthetic issue - I put defines as close as possible to where theyll be used,
not at the top. If you want this changed, please indicate if an additional fixup patch to move them up is acceptable.
thanks
Jim Cromie
PS. The following is a copy-paste of alarms being toggled by setting limits..
# sensors -v sensors version 2.10.1 with libsensors version 2.10.1
# sensors
pc87366-isa-6620
Adapter: ISA a[ 3659.886392] pc87360 pc87360.26144: Data update
dapter
VCORE: +2.01 V (min = +0.00 V, max = +3.01 V)
VCC: +4.96 V (min = +0.00 V, max = +6.03 V)
VPWR: +13.55 V (min = +0.00 V, max = +60.56 V)
+12V: +11.87 V (min = +0.00 V, max = +14.55 V)
-12V: -11.90 V (min = -59.77 V, max = -1.92 V)
GND: +0.00 V (min = +0.00 V, max = +3.01 V)
Vsb: +3.31 V (min = +0.00 V, max = +6.03 V)
Vdd: +2.98 V (min = +0.00 V, max = +6.03 V)
Vbat: +0.00 V (min = +0.00 V, max = +0.00 V)
AVdd: +3.28 V (min = +0.00 V, max = +6.03 V)
temp1: +127 C (low = -55 C, high = +127 C) OPEN
temp1_crit:
+127 C ALARM
temp2: +127 C (low = -55 C, high = +127 C) OPEN
temp2_crit:
+127 C ALARM
Temp: +98 C (low = -55 C, high = +127 C)
Critical: +127 Csoekris:/sys/devices/platform/pc87360.26144# cat temp[123]*fault [ 4044.030817] pc87360 pc87360.26144: Data update 1 1 0
the 2 faults agree with the 2 OPENs in sensors output (though I suspect they are determined by other means)
soekris:/sys/devices/platform/pc87360.26144# cat temp[123]*max_alarm [ 4302.257654] pc87360 pc87360.26144: Data update 1 1 0 soekris:/sys/devices/platform/pc87360.26144# ls temp3*
temp3_crit temp3_fault temp3_max temp3_min temp3_statustemp3_crit_alarm temp3_input temp3_max_alarm temp3_min_alarm
soekris:/sys/devices/platform/pc87360.26144# cat temp3* [ 4321.958856] pc87360 pc87360.26144: Data update 127000 0 0 98000 127000 0 -55000 0 129
soekris:/sys/devices/platform/pc87360.26144# echo 97000 > temp3_max soekris:/sys/devices/platform/pc87360.26144# cat temp3* [ 4434.226746] pc87360 pc87360.26144: Data update 127000 0 0 98000 97000 1 -55000 0 133
soekris:/sys/devices/platform/pc87360.26144# echo 97000 > temp3_crit soekris:/sys/devices/platform/pc87360.26144# cat temp3* [ 4461.619010] pc87360 pc87360.26144: Data update 97000 1 0 98000 97000 1 -55000 0 141
soekris:/sys/devices/platform/pc87360.26144# echo 101000 > temp3_max soekris:/sys/devices/platform/pc87360.26144# cat temp3* [ 4489.270994] pc87360 pc87360.26144: Data update 97000 1 0 98000 101000 1 -55000 0 141 soekris:/sys/devices/platform/pc87360.26144# soekris:/sys/devices/platform/pc87360.26144# cat temp3* [ 4495.027270] pc87360 pc87360.26144: Data update 97000 1 0 98000 101000 0 -55000 0 137
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors