ser2net package
Hi,
I am trying to access a serial port from network. I found ser2net and works fine on my desktop linux.
Has anybody written the ser2net.mk? I am having trouble to do it. Any other suggestion will be appreciated.
Regards,
Quoted 5 lines
I am trying to access a serial port from network. I found ser2net and works fine on my desktop linux.
Has anybody written the ser2net.mk? I am having trouble to do it. Any other suggestion will be appreciated.
I'll do it for $30US. Shall I send you my PayPal email?
-Steve
An HTML attachment was scrubbed...
URL: http://busybox.net/lists/buildroot/attachments/20080806/d46e7183/attachment.htm
Leonardo,
Quoted 7 lines · Leonardo Giordano
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type"> <title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
Please do not send HTML mail.
TIA,
Quoted 2 lines · Leonardo Giordano
Any other suggestion will be appreciated.
Have you tried http://buildroot.uclibc.org/buildroot.html#add_software ?
Regards,
Hinko
Signature · 7 lines
?ETRTA POT, d.o.o., Kranj Planina 3 4000 Kranj Slovenia, Europe Tel. +386 (0) 4 280 66 03 E-mail: hinko.kocevar at cetrtapot.si Http: www.cetrtapot.si
An HTML attachment was scrubbed...
URL: http://busybox.net/lists/buildroot/attachments/20080807/7b8e84e8/attachment.htm
Quoted 2 lines · Leonardo Giordano
Yes, but I am having trouble in writing the ser2net.mk file. I mean, I am reading the ser2net makefile to write the ser2net.mk.
The ser2net makefile that comes with the package is not that much of an importance, unless it is not standard. Skimming at the ser2net archive tells me it is a classic GNU automake compatible source package.
... and what is the problem.. what have you done so far? Can you share the effort here?
Thanks,
Hinko
Signature · 7 lines
?ETRTA POT, d.o.o., Kranj Planina 3 4000 Kranj Slovenia, Europe Tel. +386 (0) 4 280 66 03 E-mail: hinko.kocevar at cetrtapot.si Http: www.cetrtapot.si
An HTML attachment was scrubbed...
URL: http://busybox.net/lists/buildroot/attachments/20080807/17138211/attachment.htm
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: ser2net.mk
Url: http://busybox.net/lists/buildroot/attachments/20080807/17138211/attachment.txt
Quoted 3 lines · Leonardo Giordano
Well, I have not done so much. I am a newbie on this.
Basically, I copied the "wget" package dir to write the "ser2net" package. Then I just made some renames (wget -> ser2net). My ser2net.mk is attached.
great!
Quoted 4 lines
The when executing make, it says:
dataxfer.c:2007: error: 'B230400' undeclared here (not in a function) make[1]: *** [dataxfer.o] Error 1
Yes, I see it too on i386 arch. The missing 'B230400' definition should probably be in termios.h uClibc header. For i386 there is a comment in /buildroot/build_i386/staging_dir/usr/include/bits/termios.h saying:
#if 0 /* limited on uClibc, keep in sync w/ cfsetspeed.c */
#define B230400 0010003 #define B460800 0010004 #define B500000 0010005 #define B576000 0010006 #define B921600 0010007 #define B1000000 0010010 #define B1152000 0010011 #define B1500000 0010012 #define B2000000 0010013 #define B2500000 0010014 #define B3000000 0010015 #define B3500000 0010016 #define B4000000 0010017
#define __MAX_BAUD B4000000
#else
#define __MAX_BAUD B115200
#endif
On cris arch this is not the case... the package compiles without a glitch!
I don't have a nice fix for this, but completely removing the 2007 line in dataxfer.c works for me (at least it compiles all the way through), but I haven't tested it on real hardware.
HTH,
Hinko
Signature · 7 lines
?ETRTA POT, d.o.o., Kranj Planina 3 4000 Kranj Slovenia, Europe Tel. +386 (0) 4 280 66 03 E-mail: hinko.kocevar at cetrtapot.si Http: www.cetrtapot.si
An HTML attachment was scrubbed...
URL: http://busybox.net/lists/buildroot/attachments/20080807/b0300f61/attachment.htm