Help with recent DVB/QAM problem please.
Hi all,
Background:
I have a machine in my basement with:
Hauppauge PVR-150 (connected to DCT2524) Air2PC ATSC/OTA card (connected to antenna in attic) Avermedia A180 (connected to comcast cable) Dvico FusionHDTV RT 5 Lite (connectec comcast cable) Debian using 2.6.24-x64 kernel
Situation:
Up until a week ago, I was able to use azap to tune in
a bunch of mplexids, and get good locks on both the A180 and the Dvico card. However, starting on Monday, I am not able to get locks on either of my DVB cards.
I have been able, and am still able to get good locks
on my air2pc OTA card.
Can anyone help me figure out why I can't seem to see anything from my 2 QAM cards? I've tried running a dvbscan and neither card can make a good lock.
Thanks.
Signature · 5 lines
Mark Paulus 2424 Garden of the Gods Rd | Phone: v622-5578 / 719-535-5578 0419/117 - LEC Access ; D5-1010 | FAX: 719-535-1665 Colo Springs, CO 80919 | 1800PageMCI / 1406052 AIM : mgpaulus1 / sametime : mark.paulus
begin:vcard
fn:Mark Paulus
n:Paulus;Mark
org:MCI;Lec Interfaces / 40419
adr;dom:;;2424 Garden of the Gods Rd;Colorado Springs;CO;80919 email;internet:[email protected] title:Mark Paulus
tel;work:719-535-5578
tel;pager:800-pagemci / 1406052
tel;home:v622-5578
version:2.1
end:vcard
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
2008/8/11 Mark Paulus <[email protected]>:
Quoted 18 lines
Hi all,
Background:
I have a machine in my basement with:
Hauppauge PVR-150 (connected to DCT2524) Air2PC ATSC/OTA card (connected to antenna in attic) Avermedia A180 (connected to comcast cable) Dvico FusionHDTV RT 5 Lite (connectec comcast cable) Debian using 2.6.24-x64 kernelSituation:
Up until a week ago, I was able to use azap to tune in
a bunch of mplexids, and get good locks on both the A180 and the Dvico card.
However, starting on Monday,
I am not able to get locks on either of my DVB cards.
I have been able, and am still able to get good locks
on my air2pc OTA card.
Quoted 3 lines
Can anyone help me figure out why I can't seem to see anything from my 2 QAM cards? I've tried running a dvbscan and neither card can make a good lock.
What variables have changed in your test environment since last Monday?
If the answer is "nothing" , then the problem is more than likely due to your cable company moving services around.
First, you should confirm that you still have clear QAM available... assuming yes, then I recommend scanning for channels again.
BTW, this question is off-topic for this mailing list -- video4linux deals with analog video -- better luck on linux-dvb mailing list. (see www.linuxtv.org for mailing list subscription info)
HTH,
Mike
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list