Saa7134 with Avermedia M1155 hybrid card on Ubuntu 8.04

linux-dvb Tim Farrington 2 participants 2 messages Aug 14, 2008 Media (V4L/DVB)

lore

Share & tools

lore

Tim Farrington

author

2008-08-14 16:00 UTC #0 lore raw

Hi John,

I will try and help.

Try this and see if you get anywhere.

First, you need to install these:

sudo apt-get install build-essential mercurial

Next, you need to download v4l-dvb from Linuxtv.org into your home directory:

hg clone http://linuxtv.org/hg/v4l-dvb

Next, in Ubuntu 8.04, you will have to remove conflicting modules:
(beware this may affect things such as a webcam)

cd /lib/modules/uname -r/ubuntu
sudo rm -rf media
cd

Next, modify the source code in ~/v4l-dvb

In ~/v4l-dvb/linux/drivers/media/video/saa7134/saa7134-cards.c

Find this section:

[SAA7134_BOARD_AVERMEDIA_M115] = {

       .name           = "Avermedia M115",
       .audio_clock    = 0x187de7,
       .tuner_type     = TUNER_XC2028,
       .radio_type     = UNSET,
       .tuner_addr    = ADDR_UNSET,
       .radio_addr    = ADDR_UNSET,
/*add this line*/.mpeg           = SAA7134_MPEG_DVB,
       .inputs         = {{
           .name = name_tv,
           .vmux = 1,
           .amux = TV,
           .tv   = 1,
       }, {
           .name = name_comp1,
           .vmux = 3,
           .amux = LINE1,
       }, {
           .name = name_svideo,
           .vmux = 8,
           .amux = LINE2,
       } },

Find this section:

static int saa7134_xc2028_callback(struct saa7134_dev *dev,
int command, int arg)
{
switch (command) {
case XC2028_TUNER_RESET:

       saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00000000);
       saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00008000);
       switch (dev->board) {
       case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
       case SAA7134_BOARD_AVERMEDIA_M103:
           saa7134_set_gpio(dev, 23, 0);
           msleep(10);
           saa7134_set_gpio(dev, 23, 1);
       break;
       case SAA7134_BOARD_AVERMEDIA_A16D:
/*add this line*/case SAA7134_BOARD_AVERMEDIA_M115:
           saa7134_set_gpio(dev, 21, 0);
           msleep(10);
           saa7134_set_gpio(dev, 21, 1);
       break;
       }

return 0;
}
return -EINVAL;
}

Find this section:

int saa7134_board_init1(struct saa7134_dev *dev)
...
case SAA7134_BOARD_AVERMEDIA_CARDBUS:
/* case SAA7134_BOARD_AVERMEDIA_M115: */ /*comment this line out*/

#if 1
       /* power-down tuner chip */
       saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0xffffffff, 0);
       saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0);
#endif
       msleep(10);
       /* power-up tuner chip */
       saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0xffffffff, 0xffffffff);
       saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0xffffffff);
       msleep(10);
       break;

Find this section:

   case SAA7134_BOARD_AVERMEDIA_A16D:
       saa7134_set_gpio(dev, 21, 0);
       msleep(10);
       saa7134_set_gpio(dev, 21, 1);
       msleep(1);
       dev->has_remote = SAA7134_REMOTE_GPIO;
       break;

Create a new case entry below it:

   case SAA7134_BOARD_AVERMEDIA_M115:
       saa7134_set_gpio(dev, 21, 0);
       msleep(10);
       saa7134_set_gpio(dev, 21, 1);
       break;

Find this section:

       switch (dev->board) {
       case SAA7134_BOARD_AVERMEDIA_A16D:
       case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
       case SAA7134_BOARD_AVERMEDIA_M103:
/*add this line*/case SAA7134_BOARD_AVERMEDIA_M115:
           ctl.demod = XC3028_FE_ZARLINK456;
           break;

In ~/v4l-dvb/linux/drivers/media/video/saa7134/saa7134-dvb.c

Find this section:

   case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
       dprintk("AverMedia E506R dvb setup\n");
       saa7134_set_gpio(dev, 25, 0);
       msleep(10);
       saa7134_set_gpio(dev, 25, 1);
       dev->dvb.frontend = dvb_attach(mt352_attach,
                       &avermedia_xc3028_mt352_dev,
                       &dev->i2c_adap);
       attach_xc3028 = 1;
       break;

Create a new case entry below it:

   case SAA7134_BOARD_AVERMEDIA_M115:
       saa7134_set_gpio(dev, 25, 0);
       msleep(10);
       saa7134_set_gpio(dev, 25, 1);
       dev->dvb.frontend = dvb_attach(mt352_attach,
                       &avermedia_xc3028_mt352_dev,
                       &dev->i2c_adap);
       attach_xc3028 = 1;
       break;

Save these files.
Next, use make to build the modules:

cd
cd v4l-dvb
make
sudo make install

Next, you need to extract and install the firmware:

In ~/v4l-dvb/linux/Documentation/video4linux/extract_xc3028.pl

you will find instructions on how to use this file to obtain the firmware.

Then, copy the firmware to /lib:

sudo cp xc3028-v27.fw /lib/firmware/uname -r

reboot

check dmesg.

See if that gets anywhere.

Regards,
Timf

First, you need to install these:

sudo apt-get install build-essential mercurial

Next, you need to download v4l-dvb from Linuxtv.org into your home directory:

hg clone http://linuxtv.org/hg/v4l-dvb

Next, in Ubuntu 8.04, you will have to remove conflicting modules:
(beware this may affect things such as a webcam)

cd /lib/modules/uname -r/ubuntu
sudo rm -rf media
cd

Next, modify the source code in ~/v4l-dvb

In ~/v4l-dvb/linux/drivers/media/video/saa7134/saa7134-cards.c

Find this section:

[SAA7134_BOARD_AVERMEDIA_M115] = {
.name = "Avermedia M115",
.audio_clock = 0x187de7,
.tuner_type = TUNER_XC2028,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
/*add this line*/.mpeg = SAA7134_MPEG_DVB,

		.inputs         = {{
			.name = name_tv,
			.vmux = 1,
			.amux = TV,
			.tv   = 1,
		}, {
			.name = name_comp1,
			.vmux = 3,
			.amux = LINE1,
		}, {
			.name = name_svideo,
			.vmux = 8,
			.amux = LINE2,
		} },
	},

Find this section:

static int saa7134_xc2028_callback(struct saa7134_dev *dev,
int command, int arg)

{
	switch (command) {
	case XC2028_TUNER_RESET:
		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00000000);
		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00008000);
		switch (dev->board) {
		case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
		case SAA7134_BOARD_AVERMEDIA_M103:
			saa7134_set_gpio(dev, 23, 0);
			msleep(10);
			saa7134_set_gpio(dev, 23, 1);
		break;
		case SAA7134_BOARD_AVERMEDIA_A16D:
/*add this line*/case SAA7134_BOARD_AVERMEDIA_M115:
			saa7134_set_gpio(dev, 21, 0);
			msleep(10);
			saa7134_set_gpio(dev, 21, 1);
		break;
		}
	return 0;
	}
	return -EINVAL;
}

Find this section:

int saa7134_board_init1(struct saa7134_dev *dev)
...
case SAA7134_BOARD_AVERMEDIA_CARDBUS:
/* case SAA7134_BOARD_AVERMEDIA_M115: */ /*comment this line out*/

#if 1
		/* power-down tuner chip */
		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0xffffffff, 0);
		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0);
#endif
		msleep(10);
		/* power-up tuner chip */
		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0xffffffff, 0xffffffff);
		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0xffffffff);
		msleep(10);
		break;

Find this section:

	case SAA7134_BOARD_AVERMEDIA_A16D:
		saa7134_set_gpio(dev, 21, 0);
		msleep(10);
		saa7134_set_gpio(dev, 21, 1);
		msleep(1);
		dev->has_remote = SAA7134_REMOTE_GPIO;
		break;

Create a new case entry below it:

	case SAA7134_BOARD_AVERMEDIA_M115:
		saa7134_set_gpio(dev, 21, 0);
		msleep(10);
		saa7134_set_gpio(dev, 21, 1);
		break;

Find this section:

		switch (dev->board) {
		case SAA7134_BOARD_AVERMEDIA_A16D:
		case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
		case SAA7134_BOARD_AVERMEDIA_M103:
/*add this line*/case SAA7134_BOARD_AVERMEDIA_M115:
			ctl.demod = XC3028_FE_ZARLINK456;
			break;

In ~/v4l-dvb/linux/drivers/media/video/saa7134/saa7134-dvb.c

Find this section:

	case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
		dprintk("AverMedia E506R dvb setup\n");
		saa7134_set_gpio(dev, 25, 0);
		msleep(10);
		saa7134_set_gpio(dev, 25, 1);
		dev->dvb.frontend = dvb_attach(mt352_attach,
						&avermedia_xc3028_mt352_dev,
						&dev->i2c_adap);
		attach_xc3028 = 1;
		break;

Create a new case entry below it:

	case SAA7134_BOARD_AVERMEDIA_M115:
		saa7134_set_gpio(dev, 25, 0);
		msleep(10);
		saa7134_set_gpio(dev, 25, 1);
		dev->dvb.frontend = dvb_attach(mt352_attach,
						&avermedia_xc3028_mt352_dev,
						&dev->i2c_adap);
		attach_xc3028 = 1;
		break;

Save these files.
Next, use make to build the modules:

cd
cd v4l-dvb
make
sudo make install

Next, you need to extract and install the firmware:

In ~/v4l-dvb/linux/Documentation/video4linux/extract_xc3028.pl

you will find instructions on how to use this file to obtain the firmware.

Then, copy the firmware to /lib:

sudo cp xc3028-v27.fw /lib/firmware/uname -r

reboot

check dmesg.

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

hermann pitton

2008-08-14 23:19 UTC #1 lore raw

Hi Tim,

Am Freitag, den 15.08.2008, 00:00 +0800 schrieb Tim Farrington:

Quoted 342 lines

Hi John,
I will try and help.
Try this and see if you get anywhere.
First, you need to install these:
sudo apt-get install build-essential mercurial
Next, you need to download v4l-dvb from Linuxtv.org into your home directory:
hg clone http://linuxtv.org/hg/v4l-dvb
Next, in Ubuntu 8.04, you will have to remove conflicting modules:
(beware this may affect things such as a webcam)
cd /lib/modules/uname -r/ubuntu
sudo rm -rf media
cd
Next, modify the source code in ~/v4l-dvb
In ~/v4l-dvb/linux/drivers/media/video/saa7134/saa7134-cards.c
Find this section:
[SAA7134_BOARD_AVERMEDIA_M115] = {
.name = "Avermedia M115",
.audio_clock = 0x187de7,
.tuner_type = TUNER_XC2028,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
/*add this line*/.mpeg = SAA7134_MPEG_DVB,
        .inputs         = {{
            .name = name_tv,
            .vmux = 1,
            .amux = TV,
            .tv   = 1,
        }, {
            .name = name_comp1,
            .vmux = 3,
            .amux = LINE1,
        }, {
            .name = name_svideo,
            .vmux = 8,
            .amux = LINE2,
        } },
    },
Find this section:
static int saa7134_xc2028_callback(struct saa7134_dev *dev,
int command, int arg)
{
    switch (command) {
    case XC2028_TUNER_RESET:
        saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00000000);
        saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00008000);
        switch (dev->board) {
        case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
        case SAA7134_BOARD_AVERMEDIA_M103:
            saa7134_set_gpio(dev, 23, 0);
            msleep(10);
            saa7134_set_gpio(dev, 23, 1);
        break;
        case SAA7134_BOARD_AVERMEDIA_A16D:
/*add this line*/case SAA7134_BOARD_AVERMEDIA_M115:
            saa7134_set_gpio(dev, 21, 0);
            msleep(10);
            saa7134_set_gpio(dev, 21, 1);
        break;
        }
    return 0;
    }
    return -EINVAL;
}
Find this section:
int saa7134_board_init1(struct saa7134_dev *dev)
...
case SAA7134_BOARD_AVERMEDIA_CARDBUS:
/* case SAA7134_BOARD_AVERMEDIA_M115: */ /*comment this line out*/
#if 1
        /* power-down tuner chip */
        saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0xffffffff, 0);
        saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0);
#endif
        msleep(10);
        /* power-up tuner chip */
        saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0xffffffff, 0xffffffff);
        saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0xffffffff);
        msleep(10);
        break;
Find this section:
    case SAA7134_BOARD_AVERMEDIA_A16D:
        saa7134_set_gpio(dev, 21, 0);
        msleep(10);
        saa7134_set_gpio(dev, 21, 1);
        msleep(1);
        dev->has_remote = SAA7134_REMOTE_GPIO;
        break;
Create a new case entry below it:
    case SAA7134_BOARD_AVERMEDIA_M115:
        saa7134_set_gpio(dev, 21, 0);
        msleep(10);
        saa7134_set_gpio(dev, 21, 1);
        break;
Find this section:
        switch (dev->board) {
        case SAA7134_BOARD_AVERMEDIA_A16D:
        case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
        case SAA7134_BOARD_AVERMEDIA_M103:
/*add this line*/case SAA7134_BOARD_AVERMEDIA_M115:
            ctl.demod = XC3028_FE_ZARLINK456;
            break;
In ~/v4l-dvb/linux/drivers/media/video/saa7134/saa7134-dvb.c
Find this section:
    case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
        dprintk("AverMedia E506R dvb setup\n");
        saa7134_set_gpio(dev, 25, 0);
        msleep(10);
        saa7134_set_gpio(dev, 25, 1);
        dev->dvb.frontend = dvb_attach(mt352_attach,
                        &avermedia_xc3028_mt352_dev,
                        &dev->i2c_adap);
        attach_xc3028 = 1;
        break;
Create a new case entry below it:
    case SAA7134_BOARD_AVERMEDIA_M115:
        saa7134_set_gpio(dev, 25, 0);
        msleep(10);
        saa7134_set_gpio(dev, 25, 1);
        dev->dvb.frontend = dvb_attach(mt352_attach,
                        &avermedia_xc3028_mt352_dev,
                        &dev->i2c_adap);
        attach_xc3028 = 1;
        break;
Save these files.
Next, use make to build the modules:
cd
cd v4l-dvb
make
sudo make install
Next, you need to extract and install the firmware:
In ~/v4l-dvb/linux/Documentation/video4linux/extract_xc3028.pl
you will find instructions on how to use this file to obtain the firmware.
Then, copy the firmware to /lib:
sudo cp xc3028-v27.fw /lib/firmware/uname -r
reboot
check dmesg.
See if that gets anywhere.
Regards,
Timf
einfaches Textdokument-Anlage (m115.txt)
First, you need to install these:
sudo apt-get install build-essential mercurial
Next, you need to download v4l-dvb from Linuxtv.org into your home directory:
hg clone http://linuxtv.org/hg/v4l-dvb
Next, in Ubuntu 8.04, you will have to remove conflicting modules:
(beware this may affect things such as a webcam)
cd /lib/modules/uname -r/ubuntu
sudo rm -rf media
cd
Next, modify the source code in ~/v4l-dvb
In ~/v4l-dvb/linux/drivers/media/video/saa7134/saa7134-cards.c
Find this section:
[SAA7134_BOARD_AVERMEDIA_M115] = {
.name = "Avermedia M115",
.audio_clock = 0x187de7,
.tuner_type = TUNER_XC2028,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
/*add this line*/.mpeg = SAA7134_MPEG_DVB,
		.inputs         = {{
			.name = name_tv,
			.vmux = 1,
			.amux = TV,
			.tv   = 1,
		}, {
			.name = name_comp1,
			.vmux = 3,
			.amux = LINE1,
		}, {
			.name = name_svideo,
			.vmux = 8,
			.amux = LINE2,
		} },
	},
Find this section:
static int saa7134_xc2028_callback(struct saa7134_dev *dev,
int command, int arg)
{
	switch (command) {
	case XC2028_TUNER_RESET:
		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00000000);
		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00008000);
		switch (dev->board) {
		case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
		case SAA7134_BOARD_AVERMEDIA_M103:
			saa7134_set_gpio(dev, 23, 0);
			msleep(10);
			saa7134_set_gpio(dev, 23, 1);
		break;
		case SAA7134_BOARD_AVERMEDIA_A16D:
/*add this line*/case SAA7134_BOARD_AVERMEDIA_M115:
			saa7134_set_gpio(dev, 21, 0);
			msleep(10);
			saa7134_set_gpio(dev, 21, 1);
		break;
		}
	return 0;
	}
	return -EINVAL;
}
Find this section:
int saa7134_board_init1(struct saa7134_dev *dev)
...
case SAA7134_BOARD_AVERMEDIA_CARDBUS:
/* case SAA7134_BOARD_AVERMEDIA_M115: */ /*comment this line out*/
#if 1
		/* power-down tuner chip */
		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0xffffffff, 0);
		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0);
#endif
		msleep(10);
		/* power-up tuner chip */
		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0xffffffff, 0xffffffff);
		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0xffffffff);
		msleep(10);
		break;
Find this section:
	case SAA7134_BOARD_AVERMEDIA_A16D:
		saa7134_set_gpio(dev, 21, 0);
		msleep(10);
		saa7134_set_gpio(dev, 21, 1);
		msleep(1);
		dev->has_remote = SAA7134_REMOTE_GPIO;
		break;
Create a new case entry below it:
	case SAA7134_BOARD_AVERMEDIA_M115:
		saa7134_set_gpio(dev, 21, 0);
		msleep(10);
		saa7134_set_gpio(dev, 21, 1);
		break;
Find this section:
		switch (dev->board) {
		case SAA7134_BOARD_AVERMEDIA_A16D:
		case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
		case SAA7134_BOARD_AVERMEDIA_M103:
/*add this line*/case SAA7134_BOARD_AVERMEDIA_M115:
			ctl.demod = XC3028_FE_ZARLINK456;
			break;
In ~/v4l-dvb/linux/drivers/media/video/saa7134/saa7134-dvb.c
Find this section:
	case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
		dprintk("AverMedia E506R dvb setup\n");
		saa7134_set_gpio(dev, 25, 0);
		msleep(10);
		saa7134_set_gpio(dev, 25, 1);
		dev->dvb.frontend = dvb_attach(mt352_attach,
						&avermedia_xc3028_mt352_dev,
						&dev->i2c_adap);
		attach_xc3028 = 1;
		break;
Create a new case entry below it:
	case SAA7134_BOARD_AVERMEDIA_M115:
		saa7134_set_gpio(dev, 25, 0);
		msleep(10);
		saa7134_set_gpio(dev, 25, 1);
		dev->dvb.frontend = dvb_attach(mt352_attach,
						&avermedia_xc3028_mt352_dev,
						&dev->i2c_adap);
		attach_xc3028 = 1;
		break;
Save these files.
Next, use make to build the modules:
cd
cd v4l-dvb
make
sudo make install
Next, you need to extract and install the firmware:
In ~/v4l-dvb/linux/Documentation/video4linux/extract_xc3028.pl
you will find instructions on how to use this file to obtain the firmware.

Quoted 8 lines

Then, copy the firmware to /lib:
sudo cp xc3028-v27.fw /lib/firmware/uname -r
reboot
check dmesg.

thanks for helping out.

I'm crawling through my mail backlash and still haven't been on Australian beaches, but met always very nice people from there on some fine beaches with great waves on some of the other places.

My doubt here is, the M115 has a digital channel decoder at 0x1e/0x0f in the eeprom. John's card does not have it.

Nothing is for sure on OEM eeprom stuff, let's see how far we can come for now. But listing _all_ chips and xtals, yes do unsolder the tuner shielding if needed :), is still the minimum for a report ;)

Cheers,
Hermann

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb