Added support for the muas3001 board
PATCH v2 1/1 Added support for the muas3001 board
Hello,
changes since last post:
- merge patches 1 and 2
- integrated comments from Wolfgang Denk
- rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
[POWERPC] Added support for the muas3001 board from IAI,
based on a MPC8270 CPU.
--- MAINTAINERS | 1 + Makefile | 9 + board/muas3001/Makefile | 50 ++++++ board/muas3001/config.mk | 24 +++ board/muas3001/muas3001.c | 381 +++++++++++++++++++++++++++++++++++++++++++ include/configs/muas3001.h | 387 ++++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 852 insertions(+), 0 deletions(-) create mode 100644 board/muas3001/Makefile create mode 100644 board/muas3001/config.mk create mode 100644 board/muas3001/muas3001.c create mode 100644 include/configs/muas3001.h
MAINTAINERS +1 -0
@@ -369,6 +369,7 @@ Heiko Schocher <[email protected]> jupiter MPC5200 mgcoge MPC8247 mgsuvd MPC852 + muas3001 MPC8270 municse MPC5200 sc3 PPC405GP uc101 MPC5200
Makefile +9 -0
@@ -1689,6 +1689,15 @@ PQ2FADS-ZU_66MHz_lowboot_config \ MPC8266ADS_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads freescale +muas3001_dev_config \ +muas3001_config : unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)board/muas3001 + @if [ "$(findstring dev,$@)" ] ; then \ + echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \ + fi + @$(MKCONFIG) -a muas3001 ppc mpc8260 muas3001 + # PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash PM825_config \ PM825_ROMBOOT_config \
board/muas3001/Makefile new file +50 -0
50 lines not on this page · raw message
board/muas3001/config.mk new file +24 -0
@@ -0,0 +1,24 @@ +# +# (C) Copyright 2008 +# Heiko Schocher, DENX Software Engineering, hs at denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0xFF000000
board/muas3001/muas3001.c new file +381 -0
381 lines not on this page · raw message
include/configs/muas3001.h new file +387 -0
387 lines not on this page · raw message
Signature · 5 lines
1.5.6.1 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Wolfgang Denk
AppliedPATCH v2 1/1 Added support for the muas3001 board
Dear Heiko Schocher,
Quoted 7 lines · In message <[email protected]> you wrote:
Hello,
changes since last post:
- merge patches 1 and 2
- integrated comments from Wolfgang Denk
- renameCFG_FLASH_CFI_DRIVERtoCONFIG_FLASH_CFI_DRIVER
Note: such comments belong *below* the "---" line (otherwise they would go into the commit message).
Quoted 13 lines
Signed-off-by Heiko Schocher <[email protected]>--- MAINTAINERS | 1 + Makefile | 9 + board/muas3001/Makefile | 50 ++++++ board/muas3001/config.mk | 24 +++ board/muas3001/muas3001.c | 381 +++++++++++++++++++++++++++++++++++++++++++ include/configs/muas3001.h | 387 ++++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 852 insertions(+), 0 deletions(-) create mode 100644 board/muas3001/Makefile create mode 100644 board/muas3001/config.mk create mode 100644 board/muas3001/muas3001.c create mode 100644 include/configs/muas3001.h
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "Oh dear, I think you'll find reality's on the blink again." - Marvin The Paranoid Android