some questions
Hello,
I try to migrate our old cvs repo to git.
However, I still have to following questions
that I found difficult to answer with
the documentation.
- Is there a way to convert a indexVersion 1
repo to indexVersion 2? (And vice versa?)
- Is there a way to find out if a repository
is indexVersion 1 or indexVersion 2 (from
the pack/index files)?
- http for git seems to be read-only/fetch.
Would it be (theoretically) possible to
support write/push (with WebDAV or so)?
- I do not fully understand the implication
of 'git repack -a' (or 'git repack -A -d').
Is this bad for remote repos that are used
with http? (as '-a' is 'Especially useful when
packing a repository that is used for private
development and there is no need to worry about
people fetching via dumb protocols from it').
- What would be the implication to mount the
git repo with nts (or another remote fs).
Is it save to use such a mounted repo from
more than one computer?
Kind regards,
Thomas
Quoted 7 lines · Thomas Pasch
I try to migrate our old cvs repo to git.
However, I still have to following questions
that I found difficult to answer with
the documentation.- Is there a way to convert a indexVersion 1
repo to indexVersion 2? (And vice versa?)
I think the only solution is to simply remove index, ensure configuration (pack.indexVersion), and recreate it using git-index-pack(1).
Quoted 3 lines
- Is there a way to find out if a repository
is indexVersion 1 or indexVersion 2 (from
the pack/index files)?
There is some magic number used to distinguish between pack index version 1 and version 2.
See Documentation/technical/pack-format.txt for details.
Quoted 3 lines
- http for git seems to be read-only/fetch.
Would it be (theoretically) possible to
support write/push (with WebDAV or so)?
It *is* supported (via https).
There was even attempt to create 'smart' http push via web server module or CGI script, but IIRC it hit feature freeze and discussion petered out, so only parts of it are in 'pu'.
Search for "Add Git-aware CGI for Git-aware smart HTTP transport", "More on git over HTTP POST"
http://thread.gmane.org/gmane.comp.version-control.git/91104
Quoted 7 lines
- I do not fully understand the implication
of 'git repack -a' (or 'git repack -A -d').
Is this bad for remote repos that are used
with http? (as '-a' is 'Especially useful when
packing a repository that is used for private
development and there is no need to worry about
people fetching via dumb protocols from it').
Dumb protocols currently _always_ download whole packfiles, so if you want to serve dumb protocols you might want to offer (also?) smaller packfiles. You can, for example, use .keep files and 'git repack -a' wouldn't matter.
You can try to search archives for "generational packing" or something like that...
Quoted 4 lines
- What would be the implication to mount the
git repo with nts (or another remote fs).
Is it save to use such a mounted repo from
more than one computer?
Should work without problems, _unless_ you mean that you want to use multiple working directories with single repository. Then there are a couple of thing that you have to be beware of (but you can instead use alternates mechanism).
Signature · 3 lines
Jakub Narebski Poland ShadeHawk on #git
Quoted 7 lines · Jakub Narebski
Quoted 5 lines · Thomas Pasch
I try to migrate our old cvs repo to git.
However, I still have to following questions
that I found difficult to answer with
the documentation.
Quoted 6 lines
Quoted 2 lines
- Is there a way to convert a indexVersion 1
repo to indexVersion 2? (And vice versa?)I think the only solution is to simply remove index, ensure configuration (pack.indexVersion), and recreate it using git-index-pack(1).
Just change pack.indexVersion in .git/config to have the version you want and run git gc to repack the repository. If you created this repository by cloning another you may need to first delete any .keep files:
rm -f .git/objects/pack/*.keep
Quoted 8 lines
Quoted 3 lines
- Is there a way to find out if a repository
is indexVersion 1 or indexVersion 2 (from
the pack/index files)?There is some magic number used to distinguish between pack index version 1 and version 2.
See
Documentation/technical/pack-format.txtfor details.
for i in .git/objects/pack/pack-*.idx; do
dd if=$i bs=12 count=1 | od -c
done
A line like:
0000000 � t O c \0 \0 \0 002 \0 \0 \0 002
indicates index version 2, as it has the magic byte sequence in front of '\xFFt0c'. Most version 1 indexes will have 2 zeros in the first two bytes:
0000000 \0 \0 \0 \0 \0 \0 \0 001 \0 \0 \0 003
Quoted 11 lines
Quoted 3 lines
- http for git seems to be read-only/fetch.
Would it be (theoretically) possible to
support write/push (with WebDAV or so)?It *is* supported (via https).
There was even attempt to create 'smart' http push via web server module or CGI script, but IIRC it hit feature freeze and discussion petered out, so only parts of it are in 'pu'.
Quoted 4 lines
Search for "Add Git-aware CGI for Git-aware smart HTTP transport", "More on git over HTTP POST"
http://thread.gmane.org/gmane.comp.version-control.git/91104
I'm picking this up again and working on it more. Its not dead.
Quoted 4 lines
Quoted 4 lines
- What would be the implication to mount the
git repo with nts (or another remote fs).
Is it save to use such a mounted repo from
more than one computer?
I've found that accessing a Git pack file over a network file system like NFS or SMB is kinda slow. The issue is we do many reads scattered throughout the file. Its hard for the client to batch up reads and hide the network latency.
You may get better performance by building Git without mmap support:
make NO_MMAP=1
but that is going to hurt access to local files.
Signature · 1 line
Shawn.
Quoted 9 lines · Thomas Pasch
Hello,
I try to migrate our old cvs repo to git.
However, I still have to following questions
that I found difficult to answer with
the documentation.- Is there a way to convert a indexVersion 1
repo to indexVersion 2? (And vice versa?)
The index itself is just a little file in .git/index. There might be a better solution, but just
rm .git/index
git reset
seems to do it (of course, don't do while you have staged changes in the index !).
Quoted 3 lines
- http for git seems to be read-only/fetch.
Would it be (theoretically) possible to
support write/push (with WebDAV or so)?
http://www.kernel.org/pub/software/scm/git/docs/howto/setup-git-server-over-http.txt
(BTW, that's the first result in
http://www.google.com/search?q=git+webdav ;-) )
Signature · 1 line
Matthieu
Quoted 10 lines · Matthieu Moy
Quoted 8 lines · Thomas Pasch
I try to migrate our old cvs repo to git.
However, I still have to following questions
that I found difficult to answer with
the documentation.- Is there a way to convert a indexVersion 1
repo to indexVersion 2? (And vice versa?)
Quoted 8 lines
The index itself is just a little file in .git/index. There might be a better solution, but just
rm .git/index
git resetseems to do it (of course, don't do while you have staged changes in the index !).
True, that would reset the dircache (aka .git/index). But we only have effectively 1 version of the dircache. Sure there was an older version, way back before it got a version header and the ability to get extension sections added. I don't think there are many clients using that format anymore. That format predates the 1.4 series, and we really encourage people to be on 1.5 or later.
The original poster asked about indexVersion 1 and indexVersion 2, which means he is probably talking about pack.indexVersion and thus a .idx file alongside a pack, not the dircache file that tracks the working tree state.
Signature · 1 line
Shawn.