Skip to contentSkip to conversation

PATCH: gspca-sonixb-led-off.patch

PATCH Hans de Goede 1 participant 1 message Aug 24, 2008 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Hi,

* Turn the led of the cam off after plugging in the cam
* Move the probe code from open to config, so that if the probe fails we never register

Regards,

Hans

* Turn the led of the cam off after plugging in the cam
* Move the probe code from open to config, so that if the probe fails we never register

linux/drivers/media/video/gspca/sonixb.c +8 -3
diff -r a392efb75b57 linux/drivers/media/video/gspca/sonixb.c
@@ -789,6 +789,11 @@
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct cam *cam;
 	int sif = 0;
+	const __u8 stop = 0x09; /* Disable stream turn of LED */
+
+	reg_r(gspca_dev, 0x00);
+	if (gspca_dev->usb_buf[0] != 0x10)
+		return -ENODEV;
 
 	/* copy the webcam info from the device id */
 	sd->sensor = (id->driver_info >> 24) & 0xff;
@@ -821,15 +826,15 @@
 		sd->autogain = AUTOGAIN_DEF;
 	sd->freq = FREQ_DEF;
 
+	/* Disable stream turn of LED */
+	reg_w(gspca_dev, 0x01, &stop, 1);
+
 	return 0;
 }
 
 /* this function is called at open time */
 static int sd_open(struct gspca_dev *gspca_dev)
 {
-	reg_r(gspca_dev, 0x00);
-	if (gspca_dev->usb_buf[0] != 0x10)
-		return -ENODEV;
 	return 0;
 }
 

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list