What is "extra timer interrupt" in powertop output?
Quoted 23 lines · Andrey Borzenkov
After disabling CD-ROM polling the next top-100 winner is "extra timer interrupt":
Cn Avg residency P-states (frequencies)
C0 (cpu running) ( 4.2%) 750 Mhz 0.0%
polling 0.0ms ( 0.0%) 500 Mhz 100.0%
C1 0.0ms ( 0.0%)
C2 0.9ms (95.8%)Wakeups-from-idle per second : 1101.2 interval: 5.0s Power usage (ACPI estimate): 11.7W (2.2 hours)
Top causes for wakeups:
31.6% ( 8.4) : extra timer interrupt
15.0% ( 4.0) hald-addon-acpi :schedule_timeout(process_timeout)I assume, this is what is simply called "timer":
{pts/1}:~%> cat/proc/interrupts
CPU0
0: 9060975 XT-PIC-XT timer
Quoted 5 lines
Any way to find out why there are so many of them? System is using dynamic ticks:
{pts/1}:~/src/linux-git%> grepNO_HZ/boot/configCONFIG_NO_HZ=y
One possible reason is the hardware timer used cannot delay for long periods, so the kernel has to wake up more often than necessary. Um. This doesn't seem to be explained well in docs.
The question is do you have HPET (good hardware timer) enabled? Enabling HPET is supposed to be one of the things powertop suggests. Sometimes it is a BIOS option, or may require a kernel option, or may not be supported on your motherboard.
Alan