HVR2250 / HVR2200 / SAA7164 status
As you know, I'm writing a driver for the SAA7164 chipset, for the HVR2200 DVB-T and HVR2250 ATSC/QAM products.
People have been asking for status, here's where I am.
Do I have anything to share with people yet? Not yet.
The basic driver framework is done. Firmware is loading, I can talking to the silicon through the proprietary PCIe ring buffer interface. I2C is working, eeprom and tuner/demod access is done.
The HVR2250 is responding to azap commands, the tuners and demods are locking, snr looks pretty good... it's going to be a popular board for people.
The HVR2200 (DVB-T Version) should also worked with tzap, it's untested and I can't comment on SNR at this stage.
I need to add the DMA/buffering code, this is the missing pieces before a first public release.
When I have anything to share I'll put up a tree and post a 'testers required' message here.
- Steve
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 8 lines · Steven Toth
As you know, I'm writing a driver for the SAA7164 chipset, for the HVR2200 DVB-T and HVR2250 ATSC/QAM products.
People have been asking for status, here's where I am.
Do I have anything to share with people yet? Not yet.
The basic driver framework is done. Firmware is loading, I can talking to the silicon through the proprietary PCIe ring buffer interface. I2C is working, eeprom and tuner/demod access is done.
Quoted 7 lines
The HVR2250 is responding to azap commands, the tuners and demods are locking, snr looks pretty good... it's going to be a popular board for people.
The HVR2200 (DVB-T Version) should also worked with tzap, it's untested and I can't comment on SNR at this stage.
I need to add the DMA/buffering code, this is the missing pieces before a first public release.
When I have anything to share I'll put up a tree and post a 'testers required' message here.
Joe, my private reply to your email address bounced. This email was triggered by your status request.
... don't assume I'm ignoring you ;)
- Steve
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list