Initialization order
I'm working with a couple FreeScale platforms and having trouble getting the RTC which is connected via I2C to work. I had this working fine in the old arch/ppc tree, but it's failing in the arch/powerpc world.
Here's the problem - the RTC driver gets initialized *before* the I2C bus and as far as I can tell, the RTC 'probe' function never gets executed. I've peppered the device/bus/driver init code with some extra prints to see the flow:
*** ds1307_init.548
*** i2c_register_driver.662
*** i2c_register_driver.674
*** i2c_register_driver.682
*** driver_register.228 (rtc-ds1307) - called from c01963cc *** bus_add_driver.657 - bus: 'i2c', driver: 'rtc-ds1307' *** i2c_register_driver.689
i2c /dev entries driver
*** i2c_register_driver.662
*** i2c_register_driver.674
*** i2c_register_driver.682
*** driver_register.228 (dev_driver) - called from c01963cc *** bus_add_driver.657 - bus: 'i2c', driver: 'dev_driver' *** i2c_register_driver.689
*** platform_driver_register.456 (fsl-i2c) - called from c02bbc54 *** driver_register.228 (fsl-i2c) - called from c0162f88 *** bus_add_driver.657 - bus: 'platform', driver: 'fsl-i2c' *** fsl_i2c_probe.361
*** fsl_i2c_probe.361
There is a similar print in the 'ds1307_probe()' function, but as you can see, it's never called :-(
Can someone explain what drives the order of these init functions? I can see that it's based on the __XXXinit sections, but I don't see why the RTC functions happen before the FSL-I2C ones. From my system map:
c02bb738 t rtc_hctosysc02bb87c t rtc_initc02bb918 T rtc_dev_initc02bb97c T rtc_sysfs_initc02bb98c t ds1307_initc02bb9d0 T i2c_register_board_infoc02bbaf4 t i2c_initc02bbb80 t i2c_dev_initc02bbc3c t fsl_i2c_init
Any ideas how I can affect this ordering? or should it matter and there's something else going on?
Thanks for any pointers
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Quoted 4 lines · Gary Thomas
I'm working with a couple FreeScale platforms and having trouble getting the RTC which is connected via I2C to work. I had this working fine in the old
arch/ppctree, but it's failing in thearch/powerpcworld.
Make sure the rtc chip is described in the device tree (search existing trees for rtc@ for examples).
Quoted 2 lines
Here's the problem - the RTC driver gets initialized *before* the I2C bus
That's OK.
-Scott
Quoted 8 lines · Scott Wood
Quoted 4 lines · Gary Thomas
I'm working with a couple FreeScale platforms and having trouble getting the RTC which is connected via I2C to work. I had this working fine in the old
arch/ppctree, but it's failing in thearch/powerpcworld.Make sure the rtc chip is described in the device tree (search existing trees for rtc@ for examples).
That did it, thanks :-)
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------