nfs and kerberos authentification problem.
Subsystems (2)
Hello everybody,
I am trying to set up kerberos authentification with nfs but it doesn't succeed. I have created to principals for the client and the server. I have added the client's principal to the keytab file by setting des-encryption (with ktadd -e des-cbc-crc:normal nfs/ordi-francois.homenetwork.net). I have changed the /etc/krb5.conf on the client file to use des encryption. So, it's set like this;
[libdefaults]
default_realm = HOMENETWORK.NET
default_tkt_enctypes = aes256-cts-hmac-sha1-96 des-cbc-crc default_tgs_enctypes = aes256-cts-hmac-sha1-96 des-cbc-crc permitted_enctypes = aes256-cts-hmac-sha1-96 rc4-hmac des-cbc-crc
des3-hmac-sha1
forwardable = true
[realms]
HOMENETWORK.NET = {
admin_server = pc-francois.homenetwork.net:749 kdc = pc-francois.homenetwork.net:88
}
[domain_realm]
.homenetwork.net = HOMENETWORK.NET
homenetwork.net = HOMENETWORK.NET
But, it doesn't succeed. I can see in the log of the server (pc-francois) that the client (ordi-francois) get's a kerberos ticket but each time I mount a nfs share, it fails with this error:
mount.nfs: permission denied.
Does anybody know what's happening ?
I have put the log of the server in the attached file.
Thanks in advance for your help,
François Valenduc
Sep 3 19:36:22 pc-francois mountd[7747]: authenticated mount request from ordi-francois:865 for /home/francois (/home/francois)
Sep 3 19:36:22 pc-francois krb5kdc[9787]: AS_REQ (2 etypes {18 1}) 192.168.1.3: ISSUE: authtime 1220463382, etypes {rep=1 tkt=18 ses=18}, nfs/ordi-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected] for krbtgt/HOMENETWORK.NET-wmZDWbG+120CDknkFGB/[email protected]
Sep 3 19:36:22 pc-francois krb5kdc[9787]: AS_REQ (2 etypes {18 1}) 192.168.1.3: ISSUE: authtime 1220463382, etypes {rep=1 tkt=18 ses=18}, nfs/ordi-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected] for krbtgt/HOMENETWORK.NET-wmZDWbG+120CDknkFGB/[email protected]
Sep 3 19:36:22 pc-francois krb5kdc[9787]: TGS_REQ (2 etypes {18 1}) 192.168.1.3: ISSUE: authtime 1220463382, etypes {rep=18 tkt=1 ses=1}, nfs/ordi-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected] for nfs/pc-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected]
Sep 3 19:36:22 pc-francois krb5kdc[9787]: TGS_REQ (2 etypes {18 1}) 192.168.1.3: ISSUE: authtime 1220463382, etypes {rep=18 tkt=1 ses=1}, nfs/ordi-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected] for nfs/pc-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected]
Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: leaving poll
Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: handling null request
Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: readline: read 1106 chars into buffer of size 2048: \x \x6082022206092a864886f71201020201006e8202113082020da003020105a10302010ea20703050020000000a3820125618201213082011da003020105a11b825f74da9da214cf8780d29b9e4d2020640fbd2c598eb5e23ec084f9a8...Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: in_handle: Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: length 0 Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: in_tok: Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: length 550 Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: 0000: 6082 0222 0609 2a86 4886 f712 0102 0201 `.."..*.H....... Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: 0010: 006e 8202 1130 8202 0da0 0302 0105 a103 .n...0.......... Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: 0020: 0201 0ea2 0703 0500 2000 0000 a382 0125 ........ ......% Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: 0030: 6182 0121 3082 011d a003 0201 05a1 111b a..!0........... Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: 0040: 0f48 4f4d 454e 4554 574f 524b 2e4e 4554 .HOMENETWORK.NET Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: 0050: a22d 302b a003 0201 03a1 2430 221b 036e .-0+......$0"..n Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: 0060: 6673 1b1b 7063 2d66 7261 6e63 6f69 732e fs..pc-francois. Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: 0070: 686f 6d65 6e65 7477 6f72 6b2e 6e65 74a3 homenetwork.net.
...
Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: sname = nfs/ordi-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected] Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: DEBUG: serialize_krb5_ctx: lucid version! Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: prepare_krb5_rfc1964_buffer: serializing keys with enctype 4 and length 8 Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: doing downcall Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: \x01000000 2147483647 -1 -1 0 krb5 \x0000000000000000b46525b6ff7f00000000000000000000000000000000000016acbf48c5090c26090000002a864886f7120102020400000008000000a2df25511fa8fb680400000008000000522fd5a1ef580b98 Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: sending null reply Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: writing message: \x \x6082022206092a864886f71201020201006e8202113082020da003020105a10302010ea20703050020000000a3820125618201213082011da003020105a11
...
Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: finished handling null request Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: entering poll
Hello Fran=E7ois,
=46irst, you should not need to limit the encryption types in /etc/krb5.conf as you have done. None of the following lines are necessary in either the client or server's /etc/krb5.conf file. (Leaving them in will probably lead to headaches with other Kerberos applications in the future.)
default_tkt_enctypes =3D aes256-cts-hmac-sha1-96 des-cbc-crc default_tgs_enctypes =3D aes256-cts-hmac-sha1-96 des-cbc-crc permitted_enctypes =3D aes256-cts-hmac-sha1-96 rc4-hmac des-cbc-crc
des3-hmac-sha1
You said that you limited the client's keytab to des-cbc-crc. It appears you have done the same for the server's keytab since the ticket and session key the client gets are des-cbc-crc.
Quoted 2 lines
Sep 3 19:36:22 pc-francois krb5kdc[9787]: TGS_REQ (2 etypes {18 1})192.168.1.3: ISSUE: authtime 1220463382, etypes {rep=3D18 tkt=3D1 ses=
=3D1},
Quoted 2 lines
nfs/ordi-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected] for nfs/pc-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected]
It looks like the client is successfully authenticating as "nfs/ordi-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected]".
Quoted 2 lines
Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: sname =3Dnfs/ordi-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected]
However, mapping that gss_auth_name to a local ID is failing, and is being mapped to uid/gid of "-1 -1"
=2E
Quoted 1 line
Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: \x01000000 2147483647 =
-1 -1 0 krb5
Quoted 1 line
\x000000000000[...]80b98
The "-1" should be interpreted in the kernel as nfsnobody. What are the permissions on the exported filesystem?
K.C.
Quoted 3 lines · On Wed, Sep 3, 2008 at 2:19 PM, Fran=E7ois Valenduc…
Hello everybody,
I am trying to set up kerberos authentification with nfs but it doesn=
't
Quoted 1 line
succeed. I have created to principals for the client and the server. =
I have
Quoted 1 line
added the client's principal to the keytab file by setting des-encryp=
tion
Quoted 1 line
(with ktadd -e des-cbc-crc:normal nfs/ordi-francois.homenetwork.net).=
I have
Quoted 1 line
changed the
/etc/krb5.confon the client file to use des encryption. =
So,
Quoted 16 lines
it's set like this;
[libdefaults]
default_realm=3D HOMENETWORK.NET
default_tkt_enctypes=3D aes256-cts-hmac-sha1-96 des-cbc-crcdefault_tgs_enctypes=3D aes256-cts-hmac-sha1-96 des-cbc-crcpermitted_enctypes=3D aes256-cts-hmac-sha1-96 rc4-hmac des-cbc-crc
des3-hmac-sha1
forwardable =3D true[realms]
HOMENETWORK.NET =3D {
admin_server=3D pc-francois.homenetwork.net:749 kdc =3D pc-francois.homenetwork.net:88
}
Quoted 5 lines
[
domain_realm]
.homenetwork.net =3D HOMENETWORK.NET
homenetwork.net =3D HOMENETWORK.NETBut, it doesn't succeed. I can see in the log of the server (pc-franc=
ois)
Quoted 1 line
that the client (ordi-francois) get's a kerberos ticket but each time=
I
Quoted 6 lines
mount a nfs share, it fails with this error:
mount.nfs: permission denied.Does anybody know what's happening ?
I have put the log of the server in the attached file.
Quoted 8 lines
Thanks in advance for your help,
Fran=E7ois Valenduc
Sep 3 19:36:22 pc-francois mountd[7747]: authenticated mount request=
from
Quoted 3 lines
ordi-francois:865 for
/home/francois(/home/francois)Sep 3 19:36:22 pc-francois krb5kdc[9787]: AS_REQ (2 etypes {18 1})192.168.1.3: ISSUE: authtime 1220463382, etypes {rep=3D1 tkt=3D18 ses=
=3D18},
Quoted 4 lines
nfs/ordi-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected] for krbtgt/HOMENETWORK.NET-wmZDWbG+120CDknkFGB/[email protected]
Sep 3 19:36:22 pc-francois krb5kdc[9787]: AS_REQ (2 etypes {18 1})192.168.1.3: ISSUE: authtime 1220463382, etypes {rep=3D1 tkt=3D18 ses=
=3D18},
Quoted 4 lines
nfs/ordi-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected] for krbtgt/HOMENETWORK.NET-wmZDWbG+120CDknkFGB/[email protected]
Sep 3 19:36:22 pc-francois krb5kdc[9787]: TGS_REQ (2 etypes {18 1})192.168.1.3: ISSUE: authtime 1220463382, etypes {rep=3D18 tkt=3D1 ses=
=3D1},
Quoted 4 lines
nfs/ordi-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected] for nfs/pc-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected]
Sep 3 19:36:22 pc-francois krb5kdc[9787]: TGS_REQ (2 etypes {18 1})192.168.1.3: ISSUE: authtime 1220463382, etypes {rep=3D18 tkt=3D1 ses=
=3D1},
Quoted 5 lines
nfs/ordi-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected] for nfs/pc-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected]
Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: leaving poll Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: handling null request Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: readline: read 1106 ch=
ars
Quoted 2 lines
into buffer of size 2048: \x \x6082022206092a864886f71201020201006e8202113082020da003020105a103020=
10ea20703050020000000a3820125618201213082011da003020105a11b825f74da9da2= 14cf8780d29b9e4d2020640fbd2c598eb5e23ec084f9a8...
Quoted 8 lines
Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: in_handle: Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: length 0 Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: in_tok: Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: length 550 Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: 0000: 6082 0222 0609=
2a86
Quoted 2 lines
4886 f712 0102 0201 `.."..*.H.......
Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: 0010: 006e 8202 1130=
8202
Quoted 2 lines
0da0 0302 0105 a103 .n...0..........
Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: 0020: 0201 0ea2 0703=
0500
Quoted 2 lines
2000 0000 a382 0125 ........ ......%
Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: 0030: 6182 0121 3082=
011d
Quoted 2 lines
a003 0201 05a1 111b a..!0...........
Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: 0040: 0f48 4f4d 454e=
4554
Quoted 2 lines
574f 524b 2e4e 4554 .HOMENETWORK.NET
Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: 0050: a22d 302b a003=
0201
Quoted 2 lines
03a1 2430 221b 036e .-0+......$0"..n
Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: 0060: 6673 1b1b 7063=
2d66
Quoted 2 lines
7261 6e63 6f69 732e fs..pc-francois.
Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: 0070: 686f 6d65 6e65=
7477
Quoted 7 lines
6f72 6b2e 6e65 74a3 homenetwork.net.
...
Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: sname =3D nfs/ordi-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected] Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: DEBUG: serialize_krb5_=
ctx:
Quoted 2 lines
lucid version!
Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: prepare_krb5_rfc1964_b=
uffer:
Quoted 3 lines
serializing keys with enctype 4 and length 8
Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: doing downcall Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: \x01000000 2147483647 =
-1 -1 0
Quoted 2 lines
krb5 \x0000000000000000b46525b6ff7f00000000000000000000000000000000000016a=
cbf48c5090c26090000002a864886f7120102020400000008000000a2df25511fa8fb68= 0400000008000000522fd5a1ef580b98
Quoted 3 lines
Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: sending null reply Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: writing message: \x\x6082022206092a864886f71201020201006e8202113082020da003020105a103020=
10ea20703050020000000a3820125618201213082011da003020105a11
Quoted 8 lines
...
Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: finished handling null request Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: entering poll
A message that is not in the archive (sent off-list or not yet received): 4d569c330809031312p3515f4d8id9cbec94d871e058-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org
Kevin Coffman a =E9crit :
Quoted 12 lines
Hello Fran=E7ois,
First, you should not need to limit the encryption types in/etc/krb5.confas you have done. None of the following lines are necessary in either the client or server's/etc/krb5.conffile. (Leaving them in will probably lead to headaches with other Kerberos applications in the future.)
default_tkt_enctypes=3D aes256-cts-hmac-sha1-96 des-cbc-crcdefault_tgs_enctypes=3D aes256-cts-hmac-sha1-96 des-cbc-crcpermitted_enctypes=3D aes256-cts-hmac-sha1-96 rc4-hmac des-cbc-crc
des3-hmac-sha1
Quoted 7 lines
You said that you limited the client's keytab to des-cbc-crc. It appears you have done the same for the server's keytab since the ticket and session key the client gets are des-cbc-crc.
=20
Quoted 2 lines
Sep 3 19:36:22 pc-francois krb5kdc[9787]: TGS_REQ (2 etypes {18 1})192.168.1.3: ISSUE: authtime 1220463382, etypes {rep=3D18 tkt=3D1 se=
s=3D1},
Quoted 12 lines
Quoted 3 lines
nfs/ordi-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected] for nfs/pc-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected]
=20It looks like the client is successfully authenticating as "nfs/ordi-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected]".
=20
Quoted 3 lines
Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: sname =3Dnfs/ordi-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected]
=20
Quoted 6 lines
However, mapping that
gss_auth_nameto a local ID is failing, and is being mapped to uid/gid of "-1 -1"
.=20
Quoted 1 line
Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: \x01000000 2147483647=
-1 -1 0 krb5
Quoted 9 lines
Quoted 2 lines
\x000000000000[...]80b98
=20The "-1" should be interpreted in the kernel as nfsnobody. What are the permissions on the exported filesystem?
K.C.
=20
So, is it normat that gss map the local uid/gid to -1 -1 ? If not, what= =20
should I change ?
The folder I try to export is configured like this:
/home/francois ordi-francois(rw,root_squash,no_subtree_check)
=46ran=E7ois
Quoted 11 lines · On Thu, Sep 04, 2008 at 06:45:03PM +0200, Fran=C3=A7ois Valenduc wrote:
Kevin Coffman a =C3=A9crit :
Quoted 10 lines
Hello Fran=C3=A7ois,
First, you should not need to limit the encryption types in/etc/krb5.confas you have done. None of the following lines are necessary in either the client or server's/etc/krb5.conffile. (Leaving them in will probably lead to headaches with other Kerberos applications in the future.)
default_tkt_enctypes=3D aes256-cts-hmac-sha1-96 des-cbc-crcdefault_tgs_enctypes=3D aes256-cts-hmac-sha1-96 des-cbc-crcpermitted_enctypes=3D aes256-cts-hmac-sha1-96 rc4-hmac des-cbc-cr=
c
Quoted 8 lines
Quoted 8 lines
des3-hmac-sha1
You said that you limited the client's keytab to des-cbc-crc. It appears you have done the same for the server's keytab since the ticket and session key the client gets are des-cbc-crc.
=20
Quoted 1 line
Sep 3 19:36:22 pc-francois krb5kdc[9787]: TGS_REQ (2 etypes {18 1}=
)
Quoted 1 line
Quoted 1 line
Quoted 1 line
192.168.1.3: ISSUE: authtime 1220463382, etypes {rep=3D18 tkt=3D1 s=
es=3D1},
Quoted 12 lines
Quoted 12 lines
Quoted 3 lines
nfs/ordi-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected] for nfs/pc-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected]
=20It looks like the client is successfully authenticating as "nfs/ordi-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected]".
=20
Quoted 3 lines
Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: sname =3Dnfs/ordi-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected]
=20
Quoted 6 lines
Quoted 6 lines
However, mapping that
gss_auth_nameto a local ID is failing, and is being mapped to uid/gid of "-1 -1"
.=20
Quoted 1 line
Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: \x01000000 214748364=
7 -1 -1 0 krb5
Quoted 10 lines
Quoted 9 lines
Quoted 2 lines
\x000000000000[...]80b98
=20The "-1" should be interpreted in the kernel as nfsnobody. What are the permissions on the exported filesystem?
K.C.
=20
So, is it normat that gss map the local uid/gid to -1 -1 ? If not, wh=
at =20
Quoted 4 lines
should I change ?
The folder I try to export is configured like this:
/home/francoisordi-francois(rw,root_squash,no_subtree_check)
Assyming you're using nfs-utils 1.1.1 or later, add "sec=3Dkrb5" to the export options. (Or "sec=3Dkrb5:krb5i:krb5p" if you also want to allow integrity and privacy; and "sec=3Dsys:krb5:krb5i:krb5p" if you also wan= t
to allow auth_sys.)
--b.
J. Bruce Fields a =C3=A9crit :
Quoted 1 line
On Thu, Sep 04, 2008 at 06:45:03PM +0200, Fran=C3=A7ois Valenduc wrot=
e:
Quoted 8 lines
=20
Quoted 7 lines
Kevin Coffman a =C3=A9crit :
=20Quoted 5 lines
Hello Fran=C3=A7ois,
First, you should not need to limit the encryption types in/etc/krb5.confas you have done. None of the following lines are necessary in either the client or server's/etc/krb5.conffile. (Leaving them in will probably lead to headaches with other Kerbero=
s
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
applications in the future.)
default_tkt_enctypes=3D aes256-cts-hmac-sha1-96 des-cbc-crcdefault_tgs_enctypes=3D aes256-cts-hmac-sha1-96 des-cbc-crcpermitted_enctypes=3D aes256-cts-hmac-sha1-96 rc4-hmac des-cbc-c=
rc
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
des3-hmac-sha1
You said that you limited the client's keytab to des-cbc-crc. It appears you have done the same for the server's keytab since the ticket and session key the client gets are des-cbc-crc.
=20
=20Quoted 1 line
Sep 3 19:36:22 pc-francois krb5kdc[9787]: TGS_REQ (2 etypes {18 1=
})
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
192.168.1.3: ISSUE: authtime 1220463382, etypes {rep=3D18 tkt=3D1 =
ses=3D1},
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 4 lines
nfs/ordi-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected] for nfs/pc-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected]
=20=20It looks like the client is successfully authenticating as "nfs/ordi-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected]".
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
=20
=20Quoted 4 lines
Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: sname =3D nfs/ordi-francois.homenetwork.net-wmZDWbG+120CDknkFGB/[email protected] =20 =20However, mapping that
gss_auth_nameto a local ID is failing, and i=
s
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
being mapped to uid/gid of "-1 -1"
.=20
=20Quoted 1 line
Sep 3 19:36:22 pc-francois rpc.svcgssd[7008]: \x01000000 21474836=
47 -1 -1 0 krb5
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 3 lines
\x000000000000[...]80b98
=20=20The "-1" should be interpreted in the kernel as nfsnobody. What ar=
e
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
the permissions on the exported filesystem?
K.C.
=20
=20So, is it normat that gss map the local uid/gid to -1 -1 ? If not, w=
hat =20
Quoted 7 lines
Quoted 5 lines
should I change ?
The folder I try to export is configured like this:
/home/francoisordi-francois(rw,root_squash,no_subtree_check)
=20Assyming you're using nfs-utils 1.1.1 or later, add "sec=3Dkrb5" to t=
he
Quoted 1 line
export options. (Or "sec=3Dkrb5:krb5i:krb5p" if you also want to all=
ow
Quoted 1 line
integrity and privacy; and "sec=3Dsys:krb5:krb5i:krb5p" if you also w=
ant
Quoted 5 lines
to allow
auth_sys.)--b.
=20
I had indeed forgot to add sec=3Dkrb5 to the export options. But even i= f I=20
add it, it doesn't change anything. Is it really possible to use krb5=20 authentification with nfs ? I have read a lot of howto and follow the=20 instructions and it never succeeds...
=46ran=C3=A7ois
Quoted 1 line · On Thu, Sep 04, 2008 at 07:31:11PM +0200, Fran=C3=A7ois Valenduc wrote:
I had indeed forgot to add sec=3Dkrb5 to the export options. But even=
if I =20
Quoted 1 line
add it, it doesn't change anything.
OK, and you re-exported? (Just to double-check--what does exportfs -v say?)
Quoted 3 lines
Is it really possible to use krb5 authentification with nfs ? I have read a lot of howto and follow the instructions and it never succeeds...
I'm sorry you've had trouble with it, but yes, it definitely works--I use it every day.
--b.
J. Bruce Fields a =C3=A9crit :
Quoted 1 line
On Thu, Sep 04, 2008 at 07:31:11PM +0200, Fran=C3=A7ois Valenduc wrot=
e:
Quoted 2 lines
=20
Quoted 1 line
I had indeed forgot to add sec=3Dkrb5 to the export options. But eve=
n if I =20
Quoted 4 lines
Quoted 2 lines
add it, it doesn't change anything.
=20OK, and you re-exported? (Just to double-check--what does exportfs -=
v
Quoted 4 lines
say?)
=20
Quoted 1 line
Is it really possible to use krb5 authentification with nfs ? I hav=
e
Quoted 10 lines
Quoted 3 lines
read a lot of howto and follow the instructions and it never succeeds...
=20I'm sorry you've had trouble with it, but yes, it definitely works--I use it every day.
--b.
=20
So, here is the output of exportfs -v relating to my home folder:/home/francois =20 ordi-francois(rw,wdelay,root_squash,no_subtree_check,sec=3Dkrb5,rw,root= _squash,no_all_squash)
Quoted 2 lines · On Thu, Sep 04, 2008 at 07:41:17PM +0200, Fran=C3=A7ois Valenduc wrote:
J. Bruce Fields a =C3=A9crit :
Quoted 1 line
On Thu, Sep 04, 2008 at 07:31:11PM +0200, Fran=C3=A7ois Valenduc wro=
te:
Quoted 2 lines
Quoted 2 lines
=20
Quoted 1 line
I had indeed forgot to add sec=3Dkrb5 to the export options. But ev=
en=20
Quoted 4 lines
Quoted 4 lines
Quoted 2 lines
if I add it, it doesn't change anything.
=20OK, and you re-exported? (Just to double-check--what does exportfs =
-v
Quoted 4 lines
Quoted 4 lines
say?)
=20
Quoted 1 line
Is it really possible to use krb5 authentification with nfs ? I ha=
ve
Quoted 5 lines
Quoted 5 lines
Quoted 3 lines
read a lot of howto and follow the instructions and it never succeeds...
=20I'm sorry you've had trouble with it, but yes, it definitely works--=
I
Quoted 8 lines
Quoted 5 lines
use it every day.
--b.
=20
So, here is the output of exportfs -v relating to my home folder:
/home/francois=20 ordi-francois(rw,wdelay,root_squash,no_subtree_check,sec=3Dkrb5,rw,ro=
ot_squash,no_all_squash)
Quoted 1 line
Actually, I forgot, if you're using v3, you probably need to allow auth_sys mounts as well:
sec=3Dsys:krb5
(Fixed in the latest kernel git, but that's not released yet.)
--b.
J. Bruce Fields a =C3=A9crit :
Quoted 1 line
On Thu, Sep 04, 2008 at 07:41:17PM +0200, Fran=C3=A7ois Valenduc wrot=
e:
Quoted 4 lines
=20
Quoted 3 lines
J. Bruce Fields a =C3=A9crit :
=20Quoted 1 line
On Thu, Sep 04, 2008 at 07:31:11PM +0200, Fran=C3=A7ois Valenduc wr=
ote:
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
=20
=20Quoted 1 line
I had indeed forgot to add sec=3Dkrb5 to the export options. But e=
ven=20
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 3 lines
if I add it, it doesn't change anything.
=20=20OK, and you re-exported? (Just to double-check--what does exportfs=
-v
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
say?)
=20
=20Quoted 1 line
Is it really possible to use krb5 authentification with nfs ? I h=
ave
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 4 lines
read a lot of howto and follow the instructions and it never succeeds...
=20=20I'm sorry you've had trouble with it, but yes, it definitely works-=
-I
Quoted 9 lines
Quoted 9 lines
Quoted 6 lines
use it every day.
--b.
=20
=20So, here is the output of exportfs -v relating to my home folder:
/home/francois=20 ordi-francois(rw,wdelay,root_squash,no_subtree_check,sec=3Dkrb5,rw,r=
oot_squash,no_all_squash)
Quoted 6 lines
Quoted 2 lines
=20Actually, I forgot, if you're using v3, you probably need to allow
auth_sysmounts as well:
Quoted 7 lines
sec=3Dsys:krb5(Fixed in the latest kernel git, but that's not released yet.)
--b.
=20
I have changed it and it's still the same. The main problem seems to be= =20
the uid and gid mapping. I still get this line:
clnt: nfs-dcgn+4npE+/HutES1ELsHGk/OX1frD/[email protected], uid: -1,=20
gid: =
=20
-1, num aux grps: 0
But, exportfs -v now gives the following:/home/francois =20 ordi-francois(rw,wdelay,root_squash,no_subtree_check,sec=3Dsys:krb5,rw,= root_squash,no_all_squash)
The line in fstab on the client is the following:
pc-francois:/home/francois /mnt/pc-francois nfs =20
rw,noatime,rsize=3D1024,wsize=3D1024,soft,sec=3Dkrb5,noauto,users 0 0
What else should I do ? I can get a krb5 ticket but this is not enough=20 to mount the filesystem.
=46ran=C3=A7ois
Quoted 2 lines · On Thu, Sep 04, 2008 at 07:58:56PM +0200, Fran=C3=A7ois Valenduc wrote:
J. Bruce Fields a =C3=A9crit :
Quoted 1 line
On Thu, Sep 04, 2008 at 07:41:17PM +0200, Fran=C3=A7ois Valenduc wro=
te:
Quoted 4 lines
Quoted 4 lines
=20
Quoted 3 lines
J. Bruce Fields a =C3=A9crit :
=20Quoted 1 line
On Thu, Sep 04, 2008 at 07:31:11PM +0200, Fran=C3=A7ois Valenduc w=
rote:
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
=20Quoted 3 lines
I had indeed forgot to add sec=3Dkrb5 to the export options. But=20 even if I add it, it doesn't change anything.
=20OK, and you re-exported? (Just to double-check--what does exportf=
s -v
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
say?)
=20Quoted 1 line
Is it really possible to use krb5 authentification with nfs ? I =
have
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 3 lines
read a lot of howto and follow the instructions and it never succeeds...
=20I'm sorry you've had trouble with it, but yes, it definitely works=
--I
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines
use it every day.
--b.
=20So, here is the output of exportfs -v relating to my home folder:
/home/francois=20
ordi-francois(rw,wdelay,root_squash,no_subtree_check,sec=3Dkrb5,rw,=
root_squash,no_all_squash)
Quoted 6 lines
Quoted 6 lines
Quoted 2 lines
=20Actually, I forgot, if you're using v3, you probably need to allow
auth_sysmounts as well:
Quoted 8 lines
Quoted 7 lines
sec=3Dsys:krb5(Fixed in the latest kernel git, but that's not released yet.)
--b.
=20
I have changed it and it's still the same. The main problem seems to =
be =20
Quoted 3 lines
the uid and gid mapping. I still get this line:
clnt: nfs-dcgn+4npE+/HutES1ELsHGk/OX1frD/[email protected], uid: -1, gid: =
=20
Quoted 1 line
-1, num aux g=
rps:=20
Quoted 1 line
0
Nah, that's normal--I get the same thing, and everything still works.
Unless maybe the directory you're exporting really requires a particula= r
uid? What are the permissions on the directory you're exporting?
--b.
Quoted 4 lines
But, exportfs -v now gives the following:
/home/francois=20 ordi-francois(rw,wdelay,root_squash,no_subtree_check,sec=3Dsys:krb5,r=
w,root_squash,no_all_squash)
Quoted 6 lines
The line in fstab on the client is the following:
pc-francois:/home/francois/mnt/pc-francoisnfs =20
rw,noatime,rsize=3D1024,wsize=3D1024,soft,sec=3Dkrb5,noauto,users 0 0What else should I do ? I can get a krb5 ticket but this is not enoug=
h =20
Quoted 3 lines
to mount the filesystem.
Fran=C3=A7ois
J. Bruce Fields a =C3=A9crit :
Quoted 1 line
On Thu, Sep 04, 2008 at 07:58:56PM +0200, Fran=C3=A7ois Valenduc wrot=
e:
Quoted 4 lines
=20
Quoted 3 lines
J. Bruce Fields a =C3=A9crit :
=20Quoted 1 line
On Thu, Sep 04, 2008 at 07:41:17PM +0200, Fran=C3=A7ois Valenduc wr=
ote:
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
=20
=20Quoted 4 lines
J. Bruce Fields a =C3=A9crit :
=20 =20Quoted 1 line
On Thu, Sep 04, 2008 at 07:31:11PM +0200, Fran=C3=A7ois Valenduc =
Quoted 3 lines · wrote:
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
=20 =20Quoted 1 line
I had indeed forgot to add sec=3Dkrb5 to the export options. But=
=20
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 3 lines
even if I add it, it doesn't change anything.
=20 =20OK, and you re-exported? (Just to double-check--what does export=
fs -v
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
say?)
=20 =20Quoted 1 line
Is it really possible to use krb5 authentification with nfs ? I=
have
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 4 lines
read a lot of howto and follow the instructions and it never succeeds...
=20 =20I'm sorry you've had trouble with it, but yes, it definitely work=
s--I
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Quoted 6 lines
use it every day.
--b.
=20 =20So, here is the output of exportfs -v relating to my home folder:
/home/francois=20
ordi-francois(rw,wdelay,root_squash,no_subtree_check,sec=3Dkrb5,rw=
,root_squash,no_all_squash)
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines
=20 =20Actually, I forgot, if you're using v3, you probably need to allow
auth_sysmounts as well:sec=3Dsys:krb5
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
(Fixed in the latest kernel git, but that's not released yet.)
--b.
=20
=20I have changed it and it's still the same. The main problem seems to=
be =20
Quoted 3 lines
Quoted 3 lines
the uid and gid mapping. I still get this line:
clnt: nfs-dcgn+4npE+/HutES1ELsHGk/OX1frD/[email protected], uid: -1, gid: =
=20
Quoted 1 line
Quoted 1 line
-1, num aux =
grps:=20
Quoted 6 lines
Quoted 2 lines
0
=20Nah, that's normal--I get the same thing, and everything still works.
Unless maybe the directory you're exporting really requires a particu=
lar
Quoted 8 lines
uid? What are the permissions on the directory you're exporting?
--b.
=20
Quoted 3 lines
But, exportfs -v now gives the following:
/home/francois=20 ordi-francois(rw,wdelay,root_squash,no_subtree_check,sec=3Dsys:krb5,=
rw,root_squash,no_all_squash)
Quoted 4 lines
Quoted 4 lines
The line in fstab on the client is the following:
pc-francois:/home/francois/mnt/pc-francoisnfs =20
rw,noatime,rsize=3D1024,wsize=3D1024,soft,sec=3Dkrb5,noauto,users 0 =
0
Quoted 2 lines
Quoted 2 lines
What else should I do ? I can get a krb5 ticket but this is not enou=
gh =20
Quoted 6 lines
Quoted 4 lines
to mount the filesystem.
Fran=C3=A7ois
=20=20
It's my home directory, so it has normal permission for such a director= y:
drwxrwsr-x 77 francois francois 4,0K sep 4 20:43 francois/
I don't think there is someting strange with this. I start running out=20 of ideas to get it working. I have reenabled nfs4 (which I also tried)=20 and it give the same problem. In order to do that, I off course changed= =20
the exports file like this;
/export/francois=20 ordi-francois(nohide,rw,root_squash,no_subtree_check,sec=3Dsys:krb5)
And it is not yet working...
=46ran=C3=A7ois
=46ran=C3=A7ois
Quoted 1 line · On Thu, Sep 04, 2008 at 08:53:09PM +0200, Fran=C3=A7ois Valenduc wrote:
It's my home directory, so it has normal permission for such a direct=
ory:
Quoted 1 line
drwxrwsr-x 77 francois francois 4,0K sep 4 20:43 francois/
So everybody has permission to read that directory--OK, that shouldn't be a problem.
Quoted 1 line
I don't think there is someting strange with this. I start running ou=
t =20
Quoted 1 line
of ideas to get it working. I have reenabled nfs4 (which I also tried=
) =20
Quoted 1 line
and it give the same problem. In order to do that, I off course chang=
ed =20
Quoted 4 lines
the exports file like this;
/export/francois =20 ordi-francois(nohide,rw,root_squash,no_subtree_check,sec=3Dsys:krb5)
Let's just pick nfsv3 and stick with it; both nfsv3 and nfsv4 should work, and switching between the two just complicates the debugging.
What does your mount commandline look like?
Could you get a network trace? Just start
tcpdump -s0 -wtmp.pcap
then attempt the mount, then after it fails kill tcpdump and send me tmp.pcap.
--b.
Quoted 2 lines · On Thu, Sep 4, 2008 at 2:59 PM, J. Bruce Fields <[email protected]> = wrote:
Quoted 1 line · On Thu, Sep 04, 2008 at 08:53:09PM +0200, Fran=E7ois Valenduc wrote:
It's my home directory, so it has normal permission for such a direc=
tory:
Quoted 3 lines
Quoted 1 line
drwxrwsr-x 77 francois francois 4,0K sep 4 20:43 francois/
So everybody has permission to read that directory--OK, that shouldn'=
t
Quoted 3 lines
be a problem.
Quoted 1 line
I don't think there is someting strange with this. I start running o=
ut
Quoted 1 line
Quoted 1 line
of ideas to get it working. I have reenabled nfs4 (which I also trie=
d)
Quoted 1 line
Quoted 1 line
and it give the same problem. In order to do that, I off course chan=
ged
Quoted 10 lines
Quoted 4 lines
the exports file like this;
/export/francois ordi-francois(nohide,rw,root_squash,no_subtree_check,sec=3Dsys:krb5)
Let's just pick nfsv3 and stick with it; both nfsv3 and nfsv4 should work, and switching between the two just complicates the debugging.
What does your mount commandline look like?
Quoted 8 lines
Could you get a network trace? Just start
tcpdump -s0 -wtmp.pcap
then attempt the mount, then after it fails kill tcpdump and send me tmp.pcap.
--b.
This may be a stupid question, but can you access the mount using auth_sys? As I think I said before, it looks like the Kerberos part is working. (Unless there are errors on the client side from rpc.gssd.)
A message that is not in the archive (sent off-list or not yet received): 4d569c330809041231wcbddde8w419968280de9e39a-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org
Kevin Coffman a =E9crit :
Quoted 6 lines
On Thu, Sep 4, 2008 at 2:59 PM, J. Bruce Fields <[email protected]= wrote:
=20Quoted 3 lines · On Thu, Sep 04, 2008 at 08:53:09PM +0200, Fran=E7ois Valenduc wrote:
=20Quoted 1 line
It's my home directory, so it has normal permission for such a dire=
ctory:
Quoted 3 lines
Quoted 3 lines
Quoted 2 lines
drwxrwsr-x 77 francois francois 4,0K sep 4 20:43 francois/
=20So everybody has permission to read that directory--OK, that shouldn=
't
Quoted 4 lines
Quoted 4 lines
be a problem.
=20Quoted 1 line
I don't think there is someting strange with this. I start running =
out
Quoted 1 line
Quoted 1 line
Quoted 1 line
of ideas to get it working. I have reenabled nfs4 (which I also tri=
ed)
Quoted 1 line
Quoted 1 line
Quoted 1 line
and it give the same problem. In order to do that, I off course cha=
nged
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
the exports file like this;
=20/export/francois ordi-francois(nohide,rw,root_squash,no_subtree_check,sec=3Dsys:krb5=
)
Quoted 16 lines
Quoted 8 lines
Quoted 1 line
=20Let's just pick nfsv3 and stick with it; both nfsv3 and nfsv4 should work, and switching between the two just complicates the debugging.
What does your mount commandline look like?
Could you get a network trace? Just start
Quoted 7 lines
tcpdump -s0 -wtmp.pcap
then attempt the mount, then after it fails kill tcpdump and send me tmp.pcap.
--b.
=20
Quoted 6 lines
This may be a stupid question, but can you access the mount using
auth_sys? As I think I said before, it looks like the Kerberos part is working. (Unless there are errors on the client side from rpc.gssd.)=20
I finally found a solution to the problem. It seems that it's needed to= =20
compile both NFS v3 and v4 server support to make kerberos support=20 working. I find that a bit strange, but with this kernel configuration,= =20
it is working fine. I find that a bit strange since I export the=20 filesystem as NFS3.
Should we consider this as a bug ? I am running kernel 2.6.26.3.
Thanks a lot for your patience,
=46ran=E7ois
Quoted 8 lines · On Thu, Sep 04, 2008 at 09:38:34PM +0200, Fran=C3=A7ois Valenduc wrote:
Kevin Coffman a =C3=A9crit :
Quoted 6 lines
This may be a stupid question, but can you access the mount using
auth_sys? As I think I said before, it looks like the Kerberos part is working. (Unless there are errors on the client side from rpc.gssd.)=20
I finally found a solution to the problem.
Great!
Quoted 3 lines
It seems that it's needed to =20
compile both NFS v3 and v4 server support to make kerberos support =20 working. I find that a bit strange, but with this kernel configuratio=
n, =20
Quoted 3 lines
it is working fine. I find that a bit strange since I export the =20 filesystem as NFS3.
Should we consider this as a bug ? I am running kernel 2.6.26.3.
Yes, that would be a bug! But: are you sure gss support was built in o= n
the server?
--b.
Quoted 3 lines
Thanks a lot for your patience,
Fran=C3=A7ois
Quoted 1 line · bfields
On Thu, Sep 04, 2008 at 09:38:34PM +0200, Fran=C3=A7ois Valenduc wrot=
e:
Quoted 3 lines
Quoted 3 lines
Kevin Coffman a =C3=A9crit :
Quoted 2 lines
This may be a stupid question, but can you access the mount using
auth_sys? As I think I said before, it looks like the Kerberos pa=
rt
Quoted 10 lines
Quoted 5 lines
Quoted 4 lines
is working. (Unless there are errors on the client side from rpc.gssd.)
=20
I finally found a solution to the problem.
=20
Great!
=20Quoted 2 lines
It seems that it's needed to =20
compile both NFS v3 and v4 server support to make kerberos support =
=20
Quoted 1 line
Quoted 1 line
working. I find that a bit strange, but with this kernel configurat=
ion, =20
Quoted 5 lines
Quoted 3 lines
it is working fine. I find that a bit strange since I export the =20 filesystem as NFS3.
Should we consider this as a bug ? I am running kernel 2.6.26.3.=20
Yes, that would be a bug! But: are you sure gss support was built in=
on
Quoted 1 line
the server?
(Could you send a copy of the non-working config?)
--b.
Quoted 21 lines · J. Bruce Fields
Quoted 19 lines · bfields
Quoted 11 lines · François Valenduc
Quoted 7 lines · Kevin Coffman
This may be a stupid question, but can you access the mount using
auth_sys? As I think I said before, it looks like the Kerberos part is working. (Unless there are errors on the client side from rpc.gssd.)I finally found a solution to the problem.
Great!
Quoted 3 lines
It seems that it's needed to compile both NFS v3 and v4 server support to make kerberos support working. I find that a bit strange, but with this kernel configuration, it is working fine. I find that a bit strange since I export the filesystem as NFS3. Should we consider this as a bug ? I am running kernel 2.6.26.3.
Quoted 9 lines
Quoted 3 lines
Yes, that would be a bug! But: are you sure gss support was built in on the server?
(Could you send a copy of the non-working config?)
--b.
I confirm that GSS (CONFIG_SUNRPC_GSS and CONFIG_RPCSEC_GSS_KRB5) support was built in the non-working kernel. The only difference between the working and the non working kernel is NFS server 4 support. I don't have the config of the non working kernel. So I send the copy of the working one.
François
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.26.3
# Thu Sep 4 21:21:57 2008
#CONFIG_64BIT=y
# CONFIG_X86_32 is not setCONFIG_X86_64=yCONFIG_X86=y CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" # CONFIG_GENERIC_LOCKBREAK is not set CONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=yCONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=yCONFIG_X86_SMP=yCONFIG_X86_64_SMP=yCONFIG_X86_HT=yCONFIG_X86_BIOS_REBOOT=yCONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not setCONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not setCONFIG_IKCONFIG=yCONFIG_IKCONFIG_PROC=yCONFIG_LOG_BUF_SHIFT=15CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not setCONFIG_HAVE_UNSTABLE_SCHED_CLOCK=yCONFIG_GROUP_SCHED=yCONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not setCONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not setCONFIG_CGROUP_CPUACCT=yCONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not setCONFIG_SYSFS_DEPRECATED=yCONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not setCONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not setCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not setCONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not setCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_SYSCTL_SYSCALL_CHECK=yCONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not setCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not setCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_ANON_INODES=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_VM_EVENT_COUNTERS=yCONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not setCONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not setCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=y
# CONFIG_HAVE_DMA_ATTRS is not setCONFIG_PROC_PAGE_MONITOR=yCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not setCONFIG_BASE_SMALL=0CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not setCONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not setCONFIG_KMOD=yCONFIG_STOP_MACHINE=yCONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not setCONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not setCONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not setCONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="deadline"CONFIG_CLASSIC_RCU=y
#
# Processor type and features
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=yCONFIG_GENERIC_CLOCKEVENTS_BUILD=yCONFIG_SMP=yCONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
# CONFIG_PARAVIRT_GUEST is not setCONFIG_MEMTEST_BOOTPARAM=yCONFIG_MEMTEST_BOOTPARAM_VALUE=0
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not setCONFIG_MCORE2=y
# CONFIG_GENERIC_CPU is not setCONFIG_X86_CPU=yCONFIG_X86_L1_CACHE_BYTES=64CONFIG_X86_INTERNODE_CACHE_BYTES=64CONFIG_X86_CMPXCHG=yCONFIG_X86_L1_CACHE_SHIFT=6CONFIG_X86_GOOD_APIC=yCONFIG_X86_INTEL_USERCOPY=yCONFIG_X86_USE_PPRO_CHECKSUM=yCONFIG_X86_P6_NOP=yCONFIG_X86_TSC=yCONFIG_X86_CMOV=yCONFIG_X86_MINIMUM_CPU_FAMILY=64CONFIG_X86_DEBUGCTLMSR=yCONFIG_HPET_TIMER=yCONFIG_HPET_EMULATE_RTC=yCONFIG_DMI=yCONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not setCONFIG_SWIOTLB=yCONFIG_IOMMU_HELPER=yCONFIG_NR_CPUS=8
# CONFIG_SCHED_SMT is not set
# CONFIG_SCHED_MC is not set
# CONFIG_PREEMPT_NONE is not setCONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not setCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=y
# CONFIG_X86_MCE is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_NUMA is not setCONFIG_ARCH_SPARSEMEM_DEFAULT=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not setCONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=yCONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not setCONFIG_SPARSEMEM_EXTREME=yCONFIG_SPARSEMEM_VMEMMAP_ENABLE=yCONFIG_SPARSEMEM_VMEMMAP=y
#
# Memory hotplug is currently incompatible with Software Suspend #CONFIG_PAGEFLAGS_EXTENDED=yCONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_RESOURCES_64BIT=yCONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=yCONFIG_MTRR=yCONFIG_X86_PAT=y
# CONFIG_EFI is not setCONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not setCONFIG_HZ_1000=yCONFIG_HZ=1000CONFIG_SCHED_HRTICK=yCONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x200000CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options
#CONFIG_ARCH_HIBERNATION_HEADER=yCONFIG_PM=y
# CONFIG_PM_DEBUG is not setCONFIG_PM_SLEEP_SMP=yCONFIG_PM_SLEEP=y
# CONFIG_SUSPEND is not setCONFIG_HIBERNATION=yCONFIG_PM_STD_PARTITION=""CONFIG_TOI_CORE=y
#
# Image Storage (you need at least one allocator)
#
# CONFIG_TOI_FILE is not setCONFIG_TOI_SWAP=y
#
# General Options
#CONFIG_TOI_DEFAULT_PRE_HIBERNATE="" CONFIG_TOI_DEFAULT_POST_HIBERNATE="" CONFIG_TOI_CRYPTO=yCONFIG_TOI_USERUI=y CONFIG_TOI_USERUI_DEFAULT_PATH="/sbin/tuxoniceui_fbsplash" # CONFIG_TOI_KEEP_IMAGE is not set CONFIG_TOI_REPLACE_SWSUSP=y
# CONFIG_TOI_CHECKSUM is not set CONFIG_TOI_DEFAULT_WAIT=25 CONFIG_TOI_DEFAULT_EXTRA_PAGES_ALLOWANCE=500
# CONFIG_TOI_PAGEFLAGS_TEST is not set CONFIG_TOI=yCONFIG_ACPI=yCONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_SYSFS_POWER is not set CONFIG_ACPI_PROC_EVENT=yCONFIG_ACPI_AC=mCONFIG_ACPI_BATTERY=mCONFIG_ACPI_BUTTON=mCONFIG_ACPI_FAN=mCONFIG_ACPI_DOCK=m
# CONFIG_ACPI_BAY is not set CONFIG_ACPI_PROCESSOR=mCONFIG_ACPI_HOTPLUG_CPU=yCONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not setCONFIG_ACPI_EC=yCONFIG_ACPI_POWER=yCONFIG_ACPI_SYSTEM=yCONFIG_X86_PM_TIMER=yCONFIG_ACPI_CONTAINER=m
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options # # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set # CONFIG_X86_SPEEDSTEP_LIB is not set CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
#CONFIG_PCI=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not setCONFIG_PCIEPORTBUS=yCONFIG_PCIEAER=y
# CONFIG_PCIEASPM is not setCONFIG_ARCH_SUPPORTS_MSI=yCONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not setCONFIG_HT_IRQ=yCONFIG_ISA_DMA_API=yCONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not setCONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not setCONFIG_COMPAT=yCONFIG_COMPAT_FOR_U64_ALIGNMENT=yCONFIG_SYSVIPC_COMPAT=y
#
# Networking
#CONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not setCONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not setCONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not setCONFIG_INET_AH=mCONFIG_INET_ESP=mCONFIG_INET_IPCOMP=mCONFIG_INET_XFRM_TUNNEL=mCONFIG_INET_TUNNEL=mCONFIG_INET_XFRM_MODE_TRANSPORT=mCONFIG_INET_XFRM_MODE_TUNNEL=mCONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not setCONFIG_TCP_CONG_CUBIC=yCONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not setCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_LOG is not setCONFIG_NF_CONNTRACK=mCONFIG_NF_CONNTRACK_FTP=m
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CT_NETLINK is not setCONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not setCONFIG_NETFILTER_XT_MATCH_STATE=m
#
# IP: Netfilter Configuration
#CONFIG_NF_CONNTRACK_IPV4=mCONFIG_NF_CONNTRACK_PROC_COMPAT=yCONFIG_IP_NF_IPTABLES=mCONFIG_IP_NF_FILTER=mCONFIG_IP_NF_TARGET_REJECT=m
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not setCONFIG_NF_NAT=mCONFIG_NF_NAT_NEEDED=yCONFIG_IP_NF_TARGET_MASQUERADE=mCONFIG_NF_NAT_FTP=m
# CONFIG_NF_NAT_IRC is not set
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
# CONFIG_NF_NAT_SIP is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not setCONFIG_NET_SCH_FIFO=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not setCONFIG_BT=m
# CONFIG_BT_L2CAP is not set
# CONFIG_BT_SCO is not set
#
# Bluetooth device drivers
#CONFIG_BT_HCIUSB=mCONFIG_BT_HCIUSB_SCO=y
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#CONFIG_CFG80211=m
# CONFIG_NL80211 is not setCONFIG_WIRELESS_EXT=yCONFIG_MAC80211=m
#
# Rate control algorithm selection
#CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
#
# Selecting 'y' for an algorithm will
#
#
# build the algorithm into mac80211. # CONFIG_MAC80211_RC_DEFAULT="pid" CONFIG_MAC80211_RC_PID=y # CONFIG_MAC80211_MESH is not set # CONFIG_MAC80211_LEDS is not set # CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set # CONFIG_MAC80211_DEBUG is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=y
# CONFIG_SYS_HYPERVISOR is not setCONFIG_CONNECTOR=yCONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not setCONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#CONFIG_PNPACPI=yCONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not setCONFIG_HAVE_IDE=yCONFIG_IDE=yCONFIG_BLK_DEV_IDE=m
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=m
# CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=m CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not setCONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not setCONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not setCONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not setCONFIG_BLK_DEV_PIIX=m
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not setCONFIG_BLK_DEV_IDEDMA=y
# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not setCONFIG_SCSI=yCONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not setCONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_ATA_ACPI is not set
# CONFIG_SATA_PMP is not setCONFIG_SATA_AHCI=m
# CONFIG_SATA_SIL24 is not setCONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCH is not setCONFIG_MD=y
# CONFIG_BLK_DEV_MD is not setCONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not setCONFIG_DM_CRYPT=mCONFIG_DM_SNAPSHOT=m
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing #
# CONFIG_FIREWIRE is not setCONFIG_IEEE1394=mCONFIG_IEEE1394_OHCI1394=m
# CONFIG_IEEE1394_PCILYNX is not setCONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_RAWIO is not set
# CONFIG_IEEE1394_VIDEO1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not setCONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not setCONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not setCONFIG_SKY2=m
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not setCONFIG_WLAN_80211=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_P54_COMMON is not set
# CONFIG_ATH5K is not setCONFIG_IWLWIFI=mCONFIG_IWLCORE=m
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_IWLWIFI_RFKILL is not setCONFIG_IWL4965=mCONFIG_IWL4965_HT=y
# CONFIG_IWL4965_LEDS is not set
# CONFIG_IWL4965_SPECTRUM_MEASUREMENT is not set
# CONFIG_IWL4965_SENSITIVITY is not set
# CONFIG_IWLWIFI_DEBUG is not set
# CONFIG_IWL3945 is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not setCONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not setCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=mCONFIG_MOUSE_PS2_ALPS=yCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_PS2_LIFEBOOK=yCONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not setCONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not setCONFIG_FIX_EARLYCON_MEM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_JSM is not setCONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not setCONFIG_HW_RANDOM=mCONFIG_HW_RANDOM_INTEL=m
# CONFIG_HW_RANDOM_AMD is not setCONFIG_NVRAM=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not setCONFIG_DEVPORT=yCONFIG_I2C=mCONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not setCONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not setCONFIG_THERMAL=m
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
#
# Multimedia core support
#CONFIG_VIDEO_DEV=mCONFIG_VIDEO_V4L2_COMMON=m
# CONFIG_VIDEO_ALLOW_V4L1 is not set
# CONFIG_VIDEO_V4L1_COMPAT is not set
# CONFIG_DVB_CORE is not setCONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
# CONFIG_MEDIA_ATTACH is not setCONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMIZE is not setCONFIG_MEDIA_TUNER_SIMPLE=mCONFIG_MEDIA_TUNER_TDA8290=mCONFIG_MEDIA_TUNER_TDA9887=mCONFIG_MEDIA_TUNER_TEA5761=mCONFIG_MEDIA_TUNER_TEA5767=mCONFIG_MEDIA_TUNER_MT20XX=mCONFIG_MEDIA_TUNER_XC2028=mCONFIG_MEDIA_TUNER_XC5000=mCONFIG_VIDEO_V4L2=mCONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
#
# Encoders/decoders and other helper chips
#
#
# Audio decoders
#
# CONFIG_VIDEO_TVAUDIO is not set
# CONFIG_VIDEO_TDA7432 is not set
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TDA9875 is not set
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not set
# CONFIG_VIDEO_MSP3400 is not set
# CONFIG_VIDEO_CS5345 is not set
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_M52790 is not set
# CONFIG_VIDEO_TLV320AIC23B is not set
# CONFIG_VIDEO_WM8775 is not set
# CONFIG_VIDEO_WM8739 is not set
# CONFIG_VIDEO_VP27SMPX is not set
#
# Video decoders
#
# CONFIG_VIDEO_OV7670 is not set
# CONFIG_VIDEO_TCM825X is not set
# CONFIG_VIDEO_SAA711X is not set
# CONFIG_VIDEO_SAA717X is not set
# CONFIG_VIDEO_TVP5150 is not set
#
# Video and audio decoders
#
# CONFIG_VIDEO_CX25840 is not set
#
# MPEG video encoders
#
# CONFIG_VIDEO_CX2341X is not set
#
# Video encoders
#
# CONFIG_VIDEO_SAA7127 is not set
#
# Video improvement chips
#
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_CAFE_CCIC is not setCONFIG_V4L_USB_DRIVERS=yCONFIG_USB_VIDEO_CLASS=mCONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_SOC_CAMERA is not set
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
#
# Graphics support
#CONFIG_AGP=yCONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not setCONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not setCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not setCONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not setCONFIG_FB_UVESA=y
# CONFIG_FB_VESA is not set
# CONFIG_FB_EFI is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not setCONFIG_VIDEO_SELECT=yCONFIG_DUMMY_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not setCONFIG_FB_CON_DECOR=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
#
# Sound
#CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#CONFIG_SND=mCONFIG_SND_TIMER=mCONFIG_SND_PCM=mCONFIG_SND_HWDEP=mCONFIG_SND_RAWMIDI=mCONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not setCONFIG_SND_OSSEMUL=yCONFIG_SND_MIXER_OSS=mCONFIG_SND_PCM_OSS=mCONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_SEQUENCER_OSS is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not setCONFIG_SND_VMASTER=y
#
# Generic devices
#
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not setCONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
# CONFIG_SND_HDA_CODEC_REALTEK is not set
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
# CONFIG_SND_HDA_CODEC_ATIHDMI is not setCONFIG_SND_HDA_CODEC_CONEXANT=y
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not setCONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# USB devices
#CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# ALSA SoC audio for Freescale SOCs
#
#
# SoC Audio for the Texas Instruments OMAP
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not setCONFIG_HID_SUPPORT=yCONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not setCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=m
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not setCONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not setCONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not setCONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' #
#
# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not setCONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD Card Drivers
#CONFIG_MMC_BLOCK=mCONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD Host Controller Drivers
#CONFIG_MMC_SDHCI=mCONFIG_MMC_RICOH_MMC=m
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not setCONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not setCONFIG_MSPRO_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not set
# CONFIG_MEMSTICK_JMICRON_38X is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not setCONFIG_RTC_LIB=mCONFIG_RTC_CLASS=m
#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
# CONFIG_RTC_INTF_PROC is not setCONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#CONFIG_RTC_DRV_CMOS=m
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
# CONFIG_EXT2_FS is not setCONFIG_EXT3_FS=mCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not setCONFIG_JBD=mCONFIG_FS_MBCACHE=mCONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not setCONFIG_REISERFS_FS_XATTR=yCONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not setCONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not setCONFIG_DNOTIFY=yCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not setCONFIG_FUSE_FS=mCONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=mCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_UDF_FS=mCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not setCONFIG_VFAT_FS=mCONFIG_FAT_DEFAULT_CODEPAGE=850CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not setCONFIG_PROC_SYSCTL=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not setCONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_EMBEDDED is not setCONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not setCONFIG_NETWORK_FILESYSTEMS=yCONFIG_NFS_FS=mCONFIG_NFS_V3=yCONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not setCONFIG_NFSD=mCONFIG_NFSD_V2_ACL=yCONFIG_NFSD_V3=yCONFIG_NFSD_V3_ACL=yCONFIG_NFSD_V4=yCONFIG_LOCKD=mCONFIG_LOCKD_V4=yCONFIG_EXPORTFS=mCONFIG_NFS_ACL_SUPPORT=mCONFIG_NFS_COMMON=yCONFIG_SUNRPC=mCONFIG_SUNRPC_GSS=m
# CONFIG_SUNRPC_BIND34 is not setCONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not setCONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not setCONFIG_CIFS_XATTR=yCONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not setCONFIG_CIFS_EXPERIMENTAL=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not setCONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not setCONFIG_NLS=yCONFIG_NLS_DEFAULT="utf8"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not setCONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not setCONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not setCONFIG_ENABLE_MUST_CHECK=yCONFIG_FRAME_WARN=2048CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not setCONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_LATENCYTOP is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not setCONFIG_HAVE_ARCH_KGDB=yCONFIG_NONPROMISC_DEVMEM=yCONFIG_EARLY_PRINTK=yCONFIG_X86_MPPARSE=yCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not setCONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not setCONFIG_DEFAULT_IO_DELAY_TYPE=1
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not setCONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_AEAD=mCONFIG_CRYPTO_BLKCIPHER=mCONFIG_CRYPTO_HASH=mCONFIG_CRYPTO_MANAGER=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not setCONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not setCONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#CONFIG_CRYPTO_HMAC=m
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not setCONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_MICHAEL_MIC is not setCONFIG_CRYPTO_SHA1=mCONFIG_CRYPTO_SHA256=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_ANUBIS is not setCONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not setCONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not setCONFIG_CRYPTO_TWOFISH=mCONFIG_CRYPTO_TWOFISH_COMMON=m
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
#
# Compression
#CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_LZO is not setCONFIG_CRYPTO_LZF=y
# CONFIG_CRYPTO_HW is not setCONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_CRC_CCITT=mCONFIG_CRC16=mCONFIG_CRC_ITU_T=mCONFIG_CRC32=y
# CONFIG_CRC7 is not setCONFIG_LIBCRC32C=mCONFIG_ZLIB_INFLATE=mCONFIG_ZLIB_DEFLATE=mCONFIG_PLIST=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=y
J. Bruce Fields a =C3=A9crit :
Quoted 1 line
On Thu, Sep 04, 2008 at 09:38:34PM +0200, Fran=C3=A7ois Valenduc wrot=
e:
Quoted 5 lines
=20
Quoted 4 lines
Kevin Coffman a =C3=A9crit :
=20Quoted 2 lines
This may be a stupid question, but can you access the mount using
auth_sys? As I think I said before, it looks like the Kerberos par=
t
Quoted 14 lines
Quoted 7 lines
Quoted 5 lines
is working. (Unless there are errors on the client side from rpc.gssd.)
=20
=20I finally found a solution to the problem.
=20Great!
=20
Quoted 3 lines
It seems that it's needed to =20
compile both NFS v3 and v4 server support to make kerberos support =20 working. I find that a bit strange, but with this kernel configurati=
on, =20
Quoted 6 lines
Quoted 4 lines
it is working fine. I find that a bit strange since I export the =20 filesystem as NFS3.
Should we consider this as a bug ? I am running kernel 2.6.26.3.
=20Yes, that would be a bug! But: are you sure gss support was built in=
on
Quoted 10 lines
the server?
--b.
=20
Quoted 3 lines
Thanks a lot for your patience,
Fran=C3=A7ois
=20=20
There is still a major problem. Even if I can now mount the filesystem=20 with kerberos authentification, I can't write any file. Furthermore, I=20 can even not see the content of the exported directory without being=20 root. Is it due to the problem of uid/gid mapping ?
=46ran=C3=A7ois
=46ran=C3=A7ois Valenduc a =C3=A9crit :
Quoted 2 lines
J. Bruce Fields a =C3=A9crit :
Quoted 1 line
On Thu, Sep 04, 2008 at 09:38:34PM +0200, Fran=C3=A7ois Valenduc wro=
te:
Quoted 5 lines
Quoted 5 lines
=20
Quoted 4 lines
Kevin Coffman a =C3=A9crit :
=20Quoted 2 lines
This may be a stupid question, but can you access the mount using
auth_sys? As I think I said before, it looks like the Kerberos pa=
rt
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
is working. (Unless there are errors on the client side from rpc.gssd.)
=20
Quoted 8 lines
Quoted 8 lines
Quoted 2 lines
I finally found a solution to the problem.
=20Great!
=20
Quoted 2 lines
It seems that it's needed to compile both NFS v3 and v4 server=20 support to make kerberos support working. I find that a bit strang=
e,=20
Quoted 1 line
Quoted 1 line
Quoted 1 line
but with this kernel configuration, it is working fine. I find tha=
t=20
Quoted 5 lines
Quoted 5 lines
Quoted 3 lines
a bit strange since I export the filesystem as NFS3. Should we consider this as a bug ? I am running kernel 2.6.26.3.
=20Yes, that would be a bug! But: are you sure gss support was built i=
n on
Quoted 11 lines
Quoted 10 lines
the server?
--b.
=20
Quoted 3 lines
Thanks a lot for your patience,
Fran=C3=A7ois
=20=20
There is still a major problem. Even if I can now mount the filesyste=
m=20
Quoted 1 line
with kerberos authentification, I can't write any file. Furthermore, =
I=20
Quoted 4 lines
can even not see the content of the exported directory without being=20 root. Is it due to the problem of uid/gid mapping ?
=20
Fran=C3=A7ois
What I don' understand is that the file system is well mounted read-wri= te:
pc-francois:/home/francois on /mnt/pc-francois type nfs=20 (rw,users,noatime,sec=3Dkrb5,rsize=3D1024,wsize=3D1024,soft,addr=3D192.= 168.1.2)
The mounted directory has the following permissions:
drwxrwsr-x 77 francois francois 4,0K sep 5 20:35 pc-francois/
So, I don't understand why I can't write any file on it.
Thanks for your help;
=46ran=C3=A7ois
Quoted 1 line · On Fri, Sep 05, 2008 at 08:57:16PM +0200, Fran=C3=A7ois Valenduc wrote:
What I don' understand is that the file system is well mounted read-w=
rite:
Quoted 2 lines
pc-francois:/home/francois on
/mnt/pc-francoistype nfs =20 (rw,users,noatime,sec=3Dkrb5,rsize=3D1024,wsize=3D1024,soft,addr=3D19=
2.168.1.2)
Quoted 6 lines
The mounted directory has the following permissions:
drwxrwsr-x 77 francois francois 4,0K sep 5 20:35 pc-francois/
So, I don't understand why I can't write any file on it.
The way it would normally work is you'd have a kerberos principal named "francois-wmZDWbG+120CDknkFGB/[email protected]", and you'd run
kinit francois-wmZDWbG+120CDknkFGB/[email protected]
(or that'd be done automatically for you on login if you have the right
pam setup). When you do an nfs operation then the server will see you
as francois-wmZDWbG+120CDknkFGB/[email protected], look for a local user named "francois", an= d
use that uid/gid.
But all authentication in nfs is per-user, not per-client, so you need = a
krb5 principal for each user.
--b.
Quoted 1 line · On Fri, Sep 05, 2008 at 08:36:16PM +0200, Fran=C3=A7ois Valenduc wrote:
There is still a major problem. Even if I can now mount the filesyste=
m =20
Quoted 1 line
with kerberos authentification, I can't write any file. Furthermore, =
I =20
Quoted 1 line
can even not see the content of the exported directory without being =
=20
Quoted 1 line
root. Is it due to the problem of uid/gid mapping ?
Do you have a kerberos credential name for "francois"? When you're logged in as francois, what does klist say?
--b.
Quoted 2 lines
Fran=C3=A7ois